固相多肽合成中王树脂和Fmoc/tBu酪氨酸成酯反应的研究

以Fmoc/tBu酪氨酸和王树脂为原料,分别探讨了对称酸酐法、活化酯法和2,6-二氯苯甲酰氯(DCB)法中各种因素对氨基酸与树脂成酯反应的影响。实验表明:对称酸酐法连接率低,而其它两种方法,通过筛选合适的反应介质,均能取得良好结果。在活化酯法中,使用强极性溶剂DMA,弱极性溶剂THF/DCM和混合溶剂45%DMF/THF,反应5h,连接率均可提高到90%以上;在DCB法中,使用弱极性溶剂THF时,反应3h,连接率可达99%。总之,DCB方法是酪氨酸和王树脂成酯反应的最好方法。     

交联聚苯乙烯树脂固载甲酰基的微波辅助还原

在微波照射的相转移催化(MI-PTC)条件下,3种甲酰基功能化的交联聚苯乙烯树脂——对甲酰基苯氧基甲基树脂、对甲酰基-2-甲氧基苯氧基甲基树脂和对甲酰基-3-甲氧基苯氧基甲基树脂固载的甲酰基被NaBH4还原,得到相应的3种苄羟基功能化的树脂——Wang树脂、Sasrin树脂和新型的对苄羟基-3-甲氧基苯氧基甲基树脂.考察了溶剂、相转移催化剂等因素对反应的影响,优化的反应介质为THF/H2O混合溶剂,相转移催化剂为苄基三羟乙基氯化铵(BTHAC).然而,在传统加热和微波辐射条件下,最有效混合溶剂的配比有所不同.在水浴加热条件下,最有效的反应溶剂为12 mL THF+3 mL H2O;而在微波加热的条件下,最有效的反应溶剂却是3 mL THF+12 mL H2O.在优化的溶剂、催化剂条件下,微波功率为60 W时,高分子固载的甲酰基30 min之内几乎被定量地还原成羟基.与传统加热方式比较,MI-PTC还原聚苯乙烯固载甲酰基可以大大缩短反应时间,提高反应效率,是一种进行高分子化合物官能团转化的良好方法.     

席夫碱型聚苯乙烯多胺树脂的合成及性能研究

以乙酰化聚苯乙烯树脂为母体,与二乙烯三胺缩合制备了席夫碱型聚苯乙烯多胺树脂,分别研究了溶剂、催化剂、物料比、反应温度和反应时间等对反应的影响,并对树脂进行了结构表征,初步探索了树脂对Cu~(2+)的吸附行为。结果表明,在偏三甲苯中,以对甲苯磺酸为催化剂,160℃下反应16h,所得多胺树脂的全交换容量为3.99mmol/g,对Cu~(2+)的吸附量为63.5mg/g。     

固载胍基的强碱树脂合成与表征及其在Knoevenagel缩合反应中的催化作用

利用一步原位反应由大孔聚苯乙烯苄胺树脂和单氰胺合成含有胍基官能团的强碱阴离子交换树脂(PG),通过傅立叶红外、酸碱滴定、元素分析、SEM对胍基树脂进行了表征,同时考察了体系中pH值、投料比、温度对原位反应的影响,实验结果表明,在pH值为2的溶液中,大孔树脂氨基交换量与单氰胺的摩尔比为1∶3时,110℃反应5 h,树脂的强碱交换量达3.54 mmol/g.以胍基强碱树脂为非均相催化剂,催化Knoevenagel缩合反应,探讨了催化剂用量、反应溶剂、反应时间、树脂重复使用等因素对产率的影响,确定了反应的最佳条件.实验结果表明,该树脂具有良好的催化活性,在以乙醇为溶剂,反应时间为5 h,强碱树脂固载胍基含量与反应底物的摩尔比为1∶5时,胍基强碱树脂催化Knoevenagel缩合的反应产率达到83.1%~95.3%,胍基强碱树脂可循环使用,在5次重复实验中,其催化活性基本保持.     

一种高比表面吸附树脂的合成

本文研究了多种溶剂、催化剂及其用量、反应温度和时间对氯甲基化苯乙烯—二乙烯苯共聚体自身傅氏交联反应的影响。筛选得到了合适的反应溶剂,并确定了最佳反应条件,从而制得了高比表面积(S≥1000m~2/g)的吸附树脂。用动态法测定了吸附树脂对苯酚水溶液的吸附能力,结果表明其吸附性能和脱附效率优良。     

低交联聚乙烯后交联的研究(Ⅱ)

本文用四氯化碳为后交联剂,通过Friedel—Crafts反应使低交联聚苯乙烯发生后交联,形成大孔树脂。用正交试验法考查了反应时间,反应温度,后交联剂用量,催化剂用量和溶剂组成对树脂孔结构的影响。后交联得到的树脂的比表面积和孔容分别可达到484m~2/g和0.42ml/g。     

低交联聚苯乙烯后交联的研究(Ⅰ)

本文用氰尿酰氯为后交联剂,通过Friedel-Crafts反应使低交联聚苯乙烯发生后交联,形成大孔树脂。详细研究了反应条件对树脂孔结构的影响,所得树脂的比表面积可达500m²/g以上,孔容在0.3-0.5ml/g之间,骨架密度可达到1.3g/ml以上。树脂在不同的溶剂中有几乎相同的溶胀度。     

微波作用下大位阻氨基酸与H-Pro-CTC树脂的高效缩合

微波反应下, 运用新型固相肽合成反应器, 深入研究了五种大位阻氨基酸与H-Pro-CTC树脂(CTC树脂, 2-氯三苯甲基氯树脂)的缩合反应. 使用三次缩合的策略, 分别在DMF/NMP/THF (V∶V∶V＝1∶1∶1), NMP/DMSO/THF (V∶V∶V＝4∶1∶1), DMF/DMSO/THF (V∶V∶V＝4∶1∶1)混合溶剂中缩合一次, 每次缩合反应的最优条件为: 缩合试剂HBTU、氨基酸浓度7 mmol/L、微波辐射3 min、反应温度35 ℃、维持时间3 min, 与传统方法相比, 氨基酸的用量大大减少, 其过量倍数从5倍降低为2倍, 缩合反应速率提高了16倍以上. 五种大位阻氨基酸与H-Pro-CTC树脂的缩合率都提高到80%以上.     

PS-TEPA树脂合成及其吸附蛋白质性质

本文以四乙烯五胺与氯乙酰化聚苯乙烯树脂反应合成PS-TEPA树脂。考察了温度、时间、胺用量以及溶剂等合成条件。研究了PS-TEPA树脂吸附牛血清蛋白的条件,包括吸附温度、吸附时间以及蛋白质的用量。结果发现,当以二氯甲烷作分散剂,合成温度为85℃,反应时间为12 h,投料比为32g四乙烯五胺/g树脂条件下,树脂接枝的增重率和氮元素含量最大;当吸附温度为30℃,吸附时间为12 h,牛血清蛋白溶液的浓度为2.0 mg/mL时,PS-TEPA树脂的蛋白吸附量达到80mg/g树脂,吸附回收率为84%。     

磺酸树脂在樟脑肟贝克曼裂解反应中的催化作用

我们发现以磺酸树脂作为固体酸催化樟脑肟贝克曼裂解反应可以生成α-龙脑烯腈.考察了溶剂、催化剂用量、反应温度和反应时间等对反应的影响.在优化条件下樟脑肟可以完全转化,α-龙脑烯腈选择性高达90.5%.动力学研究表明,樟脑肟在磺酸树脂催化下的贝克曼裂解反应服从准一级动力学模型,经过最小二乘法求得反应的表观活化能为64.6kJ/mol.     

Synthesis of cyclo-PLAI using a combination of solid- and solution-phase methods

Cyclo-PLAI was successfully synthesized using a combination of solid- and solution-phase methods. This current synthesis was found to be faster than the previously reported synthesis for the cyclic peptide. The linear precursor was synthesized on 2-chlorotrityl resin with Fmoc/t-Bu strategy. HATU/HOAt was employed as the coupling reagent in the amide bond formation on the resin. Cyclization of the linear precursor was experimented with HATU/HOAt reagents with different conditions. However, the linear precursor was best cyclized using HATU reagent in DIPEA by stirring the reaction mixture at 0?°C for 1?h and followed by stirring the reaction mixture at room temperature for 30?min, giving the cyclic product in 70% yield (calculated from the linear peptide). Both linear and cyclic products were characterized using HR-TOF-ESMS, ¹H-NMR, ¹³C-NMR, and compared with previously reported spectral data for the cyclic product.     

Enabling routine fluorous capping in solid phase peptide synthesis

We describe here the use of polyfluorinated trivalent iodonium salts as efficient and robust capping reagents during solid phase peptide synthesis using either t-Boc or Fmoc chemistry. Standard protocols established for solid phase peptide synthesis can be utilized without any change in solvent or reagent conditions. The capping reaction was carried out at sites where amino acid coupling steps failed. At the termination of the synthesis, the crude peptide mixture obtained from release of materials from the resin, is either simply centrifuged in aqueous solution to yield pure peptide, or purified by passage through fluorous silica gel in solvents with high water content. We envision that the chemistry and reagents described here will find wide use in peptide and protein chemistry, and also in combinatorial library synthesis where terminal amines are coupled to reaction partners.     

COF固载铜盐催化苯硼酸与咪唑的Chan-Lam偶联反应

制备了一种含有联吡啶位点的共价有机骨架(COF)材料TpBpy, 并通过配体上的联吡啶位点固载铜盐实现了功能化, 得到的Cu@TpBpy具有大量的不饱和铜配位位点和高表面积, 可用作苯硼酸与咪唑的Chan-Lam偶联反应的多相催化剂. 通过优化溶剂、 铜源、 碱及反应时间等反应条件, 发现使用质子极性溶剂MeOH时的反应产率最高, 而Cu(OAc)₂@TpBpy是效果最佳的催化剂, 可溶性有机碱三乙胺(TEA)的促进效果最好. Cu(OAc)₂@TpBpy在碱TEA的促进下于70 ℃催化咪唑与苯硼酸反应4 h后, 得到目标产物1-苯基咪唑的最大产率为66%. 在最优反应条件下进行了底物拓展, 结果表明, 取代基的位阻效应对催化体系影响显著, 其中对位取代基的4-氯苯硼酸的产率最高(62%).     

微波辅助固相合成胸腺五肽的研究

在胸腺五肽的固相合成中, 引入微波辅助技术, 深入研究了微波作用下缩合试剂、溶剂、反应物浓度、反应时间和温度对产率的影响. 与传统方法相比, 微波将缩合反应速率提高了15倍以上, 氨基酸过量倍数也从传统的三倍降低到过量一倍, 减少胸腺五肽的合成成本约40%; 最终得到以吡啶/DMF为溶剂, 苯并三氮唑-N,N,N',N'-四甲基脲六氟磷酸酯为缩合试剂, 反应物浓度为0.113 mmol/L, 反应时间为4 min, 反应温度为20 ℃为最佳反应条件, 此时胸腺五肽的产率最高, 为88.7%.     

Peptide synthesis using pentafluorophenyl diphenylphosphate (FDP) as coupling reagent

Comparison of the reaction speed and yield with its analogues and some conventional peptide coupling reagents, pentafluorophenyl diphenylphosphate (FDP) was shown to be a more preferable "active ester" type reagent for the peptide synthesis. The synthesis of oligopeptides using FDP was achieved with high yields. The influences of several reaction parameters such as solvent, base, additive and temperature on the coupling reaction were studied using HPLC method. The degree of racemization with FDP determined by HPLC or Young test was shown to be lower than that of DCCI. Octapeptide Gly-Cys(Bzl)-Ser-Gly-Lys-Leu-Ile-Cys(Bzl)-OH, corresponding to the amino acid sequence of gp41 of HIV-1, was successfully synthesized by 5+3 approach using FDP with high yield.     

铬酸氢根季铵树脂对烯丙醇的选择性氧化

合成了铬酸氢根季铵盐树脂,以它作为一种选择性氧化剂应用于烯丙醇的氧化反应,考察了温度、时间、溶剂、树脂与醇的物料比对氧化反应的影响。在优化的反应条件下,即以苯为溶剂,n（树脂）：n（醇）=3．5：1,回流12h,丙烯醛产率达60．65％。实验表明,该季铵盐树脂能有效地将烯丙醇选择性地氧化为丙烯醛。     

Room temperature preparation of trifluoroethenylzinc reagent by metalation of the readily available halocarbon HFC-134a and an efficient, economically viable synthesis of 1,2,2-trifluorostyrenes

Trifluoroethenylzinc reagent [CF(2)=CFZnX] was generated from the readily available halocarbon HFC-134a by an in situ metalation-transmetalation procedure at temperatures near to room temperature (15-20 degrees C). By systematic standardization of the metalation experiments by manipulation of solvent, cosolvent, temperature, zinc salt, and the base, the trifluoroethenylzinc reagent was produced in 73% yield at 20 degrees C in THF medium. The palladium-catalyzed cross-coupling reaction of the trifluoroethenylzinc reagent with various aryl iodides was carried out under mild reaction conditions to produce 1,2,2-trifluorostyrenes in 59-86% isolated yields. The stability of the intermediate trifluoroethenyllithium reagent was compared at different temperatures and solvent systems. Experimental evidence for the mono-anion from HFC-134a (CF(3)CHF(-)) was obtained by the trapping of the mono-anion with zinc halide in THF/TMEDA medium. The structure and complexation of both the mono- and bis-trifluoroethenylzinc reagents with TMEDA and other ligands are discussed.     

Synthesis of Flurbiprofen via Suzuki Reaction Catalyzed by Palladium Charcoal in Water

Flurbiprofen 1, an excellent nonsteroidal antiinflammatory drug, was synthesized in 5 steps in 69% overall yield. The key step of constructing the biaryl fragment was successfully achieved via Pd/C-catalyzed Suzuki coupling reaction in water using sodium tetraphenylborate as phenylation reagent.     

钯-高分子载体催化剂对糠醛加氢液相反应的研究

以弱碱性苯乙烯系阴离子交换树脂[D392,-NH₂,D382,-NHCH₃,D301R,-NH(CH₃)₂],强碱性苯乙烯系阴离子交换树脂[201×7DVB,-NH⁺(CH₃)₃]和弱碱性环氧系阴离子交换树脂(701,-NH₂)为载体制备了3种钯-高分子载体催化剂.考察了反应条件、高分子载体的种类、钯含量和催化剂用量对糠醛催化加氢生成四氢糠醇反应及催化性能的影响.在体积分数为50%的乙醇-水溶液和水中对糠醛常压液相加氢反应,钯-高分子载体(阴离子交换树脂D392,-NH₂,D382,-NHCH₃)催化剂均可使糠醛的加氢反应转化率达100%,生成四氢糠醇的选择性达98%以上,而用金属钯为催化剂的转化率达70%以上,选择性达97%以上.同时用XPS分析了高分子载体催化剂的结构与催化加氢反应性能的关系.