功能彩色高分了合成技术进展

本文通过实例对功能彩色高分子的合成方法心每种合成方法的原理，特点，发展历史和可实行性作了较详细的综述。     

疏水缔合型水溶性高分子的合成与表征

本文综述了疏水缔合型水溶性高分子的合成与表征方法，６文中介绿了在合成过程中提高油溶性单体和水溶性单体的混溶性以及疏水基团均匀分布的方法，并了用核磁共振，上光谱等方法测定疏水物含量的方法。     

超分子构筑调控合成结构规整的梯形聚合物及其应用研究

综述了"超分子构筑调控的逐步偶联/聚合法",该方法将高分子化学与超分子化学相结合,利用多种类型的超分子弱键协同作用首先构筑预期的梯形超分子结构,再经聚合得到共价键梯形高分子.利用该方法合成了一系列结构规整的氧桥基和有机桥基梯形聚硅氧烷以及碳基梯形聚酯,并利用侧基间π-π叠加作用实现了对聚合物立体构型控制.扼要介绍了梯形聚合物在先进材料方面的应用,例如梯形聚硅氧烷液晶光致取向膜;由梯形聚硅氧烷合成的管状聚硅氧烷在高室温储存期微电子环氧塑封料方面的应用;以及基于梯形聚硅氧烷的拟筛板聚合物在二阶非线性光学材料方面的应用等.     

磁性高分子微球

对磁性高分子微球的研究现状进行了综述,详细探讨了目前常用的各种合成制备方法,并对各种方法的优缺点进行了分析。在此基础上,对磁性高分子微球在细胞分离、有机合成、环境/食品微生物检测等领域的最新应用进展及存在的问题进行了分析,指出了该领域今后的研究方向。     

一种合成共轭高分子——聚（N,N—二甲基苯胺）的新方法

利用一种新的合成方法，首次合成了侧链带有强推生基力的聚苯衍生物－－聚（Ｎ，Ｎ－二甲基苯胺），初步研究了中间产物的形成及这种固相聚合反应的适宜条件，并通过元素分析、红外、ＨＮＭＲ及紫外光谱对聚合产物进行了结构表征。     

不同形貌聚苯胺的合成及其在电化学中的应用研究进展

综述了不同形貌聚苯胺(PANI)的合成及其在电化学中的应用研究进展,阐述了PANI形貌的分类及其制备方法,着重介绍了化学氧化聚合法合成不同形貌的PANI,并讨论了苯胺的浓度、氧化剂的浓度、温度、pH值、表面活性剂、掺杂剂等参数对PANI形貌的影响。此外,本文还概述了PANI在超级电容器、传感器、防腐材料等领域的应用。     

含羧基磁性高分子微球的合成与表征

在共沉淀法合成超细磁粉的基础上，以苯乙烯(St)和丙烯酸为共聚单体，以过氧化苯甲酰(BPO)为引发剂，用分散聚合法得到了含羧基的具有核壳结构的磁性高分子微球。采用XRD、TEM、SEM、IR等对样品进行了表征。表征结果表明：制备的磁粉为Fe₃O₄单相，磁粉的粒径为10 nm左右，微球粒径大约在1～5 μm，呈球形，微球中存在羧基。VSM磁性能测试结果表明：用PEG4000作为表面活性剂时，样品的磁性能最强。分散剂和分散介质对微球形貌和粒度均有影响。     

聚并苯导电高分子材料研究的进展

聚并苯导电材料可由酚醛树脂高温裂解得到,其比重、磁化率、电阻率等在50年代就有人进行过研究。80年代以来,随着有机导电聚合物研究的兴起,聚并苯材料以其合成简单、易于掺杂、在空气中稳定及电导率可随合成温度变化(近20个数量级)等特点引起了人们极     

聚乳酸的合成及分析

采用间接开环聚合法合成了平均分子量为444，848的聚乳酸，并对合成工艺作了优化。用IR对所得单体丙交酯和聚乳酸进行了结构分析，结果表明，丙交酯和聚乳酸的谱图中各官能团十分明显。     

共轭聚腈高分子的研究进展

本文从合成，聚合机理，性能以及应用等几方面较系统地综述了共轭聚腈主分的发展概况，并对其今后的发展趋势做了展望。     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

栽培草莓品种果实香气特性研究

通过对4个不同栽培草莓(Fragaria ananassa Duch．)品种果实糖和氨基酸测定及香气的GC-MS分析,结果表明：不同品种间氨基酸和糖含量不同,氨基酸含量由高到低依次为丰香、瓦尔达、哈达和全明星;哈达、丰香、全明星和瓦尔达4个品种果实分别检测出39、46、37和44种香气成分,各占总峰面积98.52％、99.15％、98.77％和95.4l％,检测成分的多少与氨基酸总量显著正相关,相关系数为0.967;哈达有5种独有的成分,丰香有9种独有的成分,全明星有3种独有的成分,瓦尔达有2种独有的成分,4个品种共有的成分有19种。     

NiY分子筛表面酸性影响其选择性吸附脱硫性能的机理研究

采用原位红外光谱技术,以噻吩、环己烯和苯为模型探针分子,分别考察单一烃分子在NiY分子筛上的吸附与反应行为以及噻吩与烯烃、芳烃间的竞争吸附和催化反应行为。单一探针分子吸附研究发现,NiY分子筛中与Ni物种相关的Lewis(L)酸位是噻吩的选择性吸附活性位;噻吩和环己烯在NiY分子筛中Brnsted(B)酸位上发生的质子化和低聚反应明显弱于HY分子筛。双探针分子竞争吸附研究发现,环己烯二聚体在NiY中强B酸位上的强化学吸附与噻吩存在显著的竞争吸附行为。另外,苯和噻吩在NiY上的竞争吸附现象在373K时明显减弱。由此,在选择性吸附脱硫过程中,减少吸附剂表面B酸中心可降低烯烃对噻吩的竞争吸附,另外适当提高吸附体系的温度可以有效避免芳烃对噻吩的竞争吸附。     

Study of hydration of two cements of different strengths

Main hydration products of two cement pastes, i.e. CSH-gel, portlandite (P) (and specific surface S) were studied by static heating, and by SEM, TEM and XRD, as a function of cement strength (C-33 and C-43) hydration time (th) and subsequent hydration in water vapour.Total change in mass on hydration and air drying, M_o, increased with strength of cement paste and with hydration time. Content of water escaping at 110 to 220°C, defined as water bound with low energy, mainly interlayer and hydrate water, was independent on cement strength but its content increased with (th). Content of chemically bound (zeolitic) water in CSH-gel, escaping at 220-400°C, was slightly dependent on strength and increased with (th). It was possibly derived from the dehydroxylation of CSH-gel and AFm phase. Portlandite water, escaping at 400-500°C, was independent on cement strength and was higher on longer hydration. Large P crystals were formed in the weaker cement paste C-33. Smaller crystals were formed in C-43 but they increased with (th). Carbonate formated on contact with air (calcite, vaterite and aragonite), decomposed in cement at 600-700^oC. It was high in pastes C-33(1 month) and C-43(1 month), i.e. 5.7 and 3.3%, respectively; it was less than 1% after 6 hydration months (low sensitivity to carbonation) in agreement with the XRD study showing carbonates in the air dry paste (1month), and its absence on prolonged hydration (6 months) and on acetone treatment. Water vapour treatment of (6 months) pastes or wetting-drying increased this sensitivity.Nanosized P-crystals, detected by TEM, could contribute to the cement strength; carbonate was observed on the rims of gel clusters.This revised version was published online in November 2005 with corrections to the Cover Date.     

化学单元教学设计的探索

论述了单元教学是落实化学新课程三维目标的基本教学过程,同时对教学单元的含义、教学单元的选择与建构、化学单元教学设计及其意义进行了阐述。     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。     

照度对呋喃西林水溶液的表观光反应级数的影响

研究呋喃西林水溶液光解反应的表观反应级数和光照度以及浓度的关系。配制三种不同浓度的呋喃西林水溶液, 分别考查其在三种光照度下的降解反应级数。试验表明当光照度一定时，呋喃西林水溶液的光反应级数随浓度的减小而增大，当初浓度一定时，光反应级数随照度的增大而增大。呋喃西林水溶液在光作用下的表观反应级数与药物的初浓度和入射光的照度都有关。     

Characterization of Losses of Chlorinated Pollutants during Lyophilization of Mussels

The influence of the lyophilization process on the recovery of ten organochlorine compounds, (9 polychlorinated biphenyls (PCBs) and pp′-DDE [1,1-dichloro-2,2-bis(p-chlorophenyl)ethylene)] during the pretreatment step of mussels was studied at three concentration levels. Losses of more polar and water-soluble compounds were approximately 50% in samples pulverized prior to lyophilization. Two variables, moisture and lipid concentrations, had statistical influences in the losses of the lower chlorinated compounds (CB 31 and CB 28). In some PCB congeners (CB 52, CB 101, and CB 118), the variation of losses with the PCB concentrations was also statistically significant.