n型Bi2Te3-ySey温差电材料薄膜的电化学制备及表征

采用电化学控电位的方法在不锈钢基片上电沉积制备了Bi₂Te_3-ySe_y温差电材料薄膜。研究了电沉积溶液中硒含量与薄膜中硒含量的关系，考察了不同沉积电位对电沉积Bi₂Te_3-ySe_y薄膜的温差电性能的影响，并采用ESEM、EDS、XRD等方法对电沉积薄膜的形貌、成分及结构进行了分析。结果表明，在含有Bi³⁺、HTeO₂⁺和Se⁴⁺的电沉积溶液中，采用电化学沉积的方法，可实现铋、碲、硒三元共沉积，生成Bi₂Te_3-ySe_y半导体化合物。改变电沉积溶液组成，可控制Bi₂Te_3-ySe_y化合物中硒的掺杂浓度。-0.04 V沉积电位下制备的Bi₂Te_3-ySe_y薄膜较平整、致密，组成为Bi₂Te_2.7Se_0.3。退火处理可提高电沉积Bi₂Te_3-ySe_y薄膜的塞贝克系数，且控制沉积电位为-0.04 V下制备的Bi₂Te_3-ySe_y薄膜退火后的塞贝克系数为-123 μV·K^-1。     

电沉积Bi2Te3基薄膜的电化学阻抗谱研究

以不锈钢为基底,利用电化学沉积方法制备Bi2Te3基薄膜材料,并采用X射线衍射技术、电子探针微观分析等方法对薄膜进行结构和成分表征,通过电化学阻抗谱技术对不锈钢表面Bi2Te3的电化学沉积机理进行了初步探讨.结果表明Bi-Te和Bi-Te-Se体系具有相似的电化学沉积机理,即Bi3+和2HTeO+或H2SeO3首先被还原为Bi单质和Te或Se单质,然后Bi单质与Te或Se单质反应生成Bi2Te3基化合物,而Bi-Sb-Te体系中,2HTeO+首先被还原为Te单质,生成的Te再与Bi3+和Sb(III)反应生成Bi2Te3基化合物,三种体系的沉积都受电化学极化控制.     

CuInSe_2薄膜的电化学沉积及其形成机理

采用电化学沉积法制备了太阳电池用CuInSe2薄膜.利用循环伏安法(CV)、X射线能谱(EDS)和X射线衍射技术(XRD)研究了电沉积过程中CuInSe2的形成机理,并研究了制备工艺对膜层成分、形貌和物相结构的影响.研究结果表明,铟进入固相是通过In3+受Cu3Se2诱导作用欠电势还原或者In3+与H2Se反应这两种途径实现;先沉积的Cu3Se2与新生成的铟或铟硒化合物反应最后生成CuInSe2.在阴极电位为-0.58~-0.9 V(vs.SCE)时出现了不随电位变化的极限还原电流,在该电位范围内进行电沉积获得了化学计量组成稳定可控且相对致密平整的CuInSe2薄膜.电沉积的CuInSe2薄膜经真空退火处理后结晶质量得到明显改善.     

p型Se的电沉积及其转化为n型CdSe的机理研究

利用线性电位扫描光伏安法等技术研究钛基体上Se半导体薄膜的电化学形成及转化过程.实验结果表明,在H_2SeO_3溶液中进行电沉积可获得p型Se薄膜,它可在酸性CdSO_4溶液中阴极转化为n型CdSe.讨论了Se的电沉积动力学及其转化为CdSe的可能机理.所述原理可望用于p-n异质结的电化学制备.     

CdSe电沉积层的组成及形成机理

伏安曲线和现场光电流测定用于研究在钛基体上阴极电沉积形成Cdse薄膜的机理. XPS实验表明, CdSe沉积层的组成与沉积电位、沉积时间和溶液组成有关.在0.1 mol·L~(-1)CdSO_4+4 mmol·L~(-1)H_2SeO_3+0.2 mol·L~(-1) H_2SO_4溶液中, 当电位比-0.50 V正时生成富Se层, 而当电位比-0.70 V还负时生成富Cd层. 在-0.69 V下沉积, 沉积层的Se/Cd计量比接近1.1. 在同一电位下, 若提高H_2Se0_3浓度, 则沉积物中Se的含量增多. 实验结果表明, CdSe电沉积因条件不同遵循两种不同的机理, 据此讨论了克服Se/Cd比大于1的可能措施。     

以乙醇作溶剂电沉积制备CIGS薄膜

利用恒电位电沉积法在以乙醇为溶剂的溶液中制备了铜铟镓硒(CIGS)薄膜.并采用扫描电子显微镜(SEM)、X射线能谱仪(EDS)、X射线衍射仪(XRD)和紫外-可见-近红外(UV-VIS-NIR)分光光度计分别对薄膜的形貌、成分、晶体结构和吸收特性进行了表征.结果表明在-1.6V(相对于饱和甘汞电极电位)工作电位下沉积的薄膜经450°C退火后能够形成形貌均匀致密、结晶性良好、带隙约为1.17eV的黄铜矿结构CuIn0.7Ga0.3Se2薄膜.实验过程中发现,以乙醇为溶剂可以有效避免在水溶液中出现的析氢现象,减小了沉积电位的限制.     

一步法电化学沉积Cu(In1-x,Gax)Se2薄膜的特性

在CuCl2、InCl3、GaCl3及H2SeO3组成的酸性水溶液电沉积体系中, 对Mo/玻璃衬底上一步法电沉积Cu(In1-x, Gax)Se2(简写为CIGS)薄膜进行了研究. 为了稳定溶液的化学性质, 在溶液中加入邻苯二甲酸氢钾和氨基磺酸作为pH缓冲剂, 将溶液的pH值控制在约2.5, 并提高薄膜中Ga的含量. 通过大量实验优化了溶液组成及电沉积条件, 得到接近化学计量比贫Cu 的CIGS薄膜(当Cu与In+Ga的摩尔比为1时, 称为符合化学计量比的CIGS薄膜; 当其比值为0.8-1时, 称为贫Cu或富In的CIGS 薄膜)预置层, 薄膜表面光亮、致密、无裂纹. 利用循环伏安法初步研究了一步法电沉积CIGS薄膜的反应机理, 在沉积过程中, Se4+离子先还原生成单质Se, 再诱导Cu2+、Ga3+和In3+发生共沉积. 电沉积CIGS薄膜预置层在固态硒源280 ℃蒸发的硒气氛中进行硒化再结晶, 有效改善了薄膜的结晶结构, 且成份基本不发生变化,但是表面会产生大量的裂纹.     

亚硒酸钠在L-半胱氨酸自组装类生物膜修饰电极上的电化学行为

利用L-半胱氨酸自组装膜修饰金电极(L-Cys,Au/SAMs), 在0.05mol/L H_2SO_4 底液中研究了 Na_2SeO_3 的电化学特性.在0.00～1.30 V (vs. SCE) 电位范围内对微量Na_2SeO_3进行循环伏安扫描,发现L-Cys, Au/SAMs修饰电极在峰电位0.89 V处有灵敏的Se的氧化溶出峰.通过比较裸金电极和修饰电极在Na_2SeO_3 溶液中的电化学特性发现,修饰电极通过巯基中的S与Na_2SeO_3发生氧化还原作用生成Se,且修饰电极对沉积在电极表面的Se的氧化过程具有催化作用.根据Na_2SeO_3在单分子膜上的电化学行为,提出了单分子膜中硫(Au-S)与Se(Ⅳ)作用生成Se的反应机理、Se电化学催化氧化机理及巯基化合物通过生成纳米硒生物吸收Se的类生物膜模型.     

电沉积WO_3薄膜及其光电性能的表征

本文采用电化学法制备了均匀、附着力强的WO3薄膜,研究了不同沉积电位和不同的沉积时间对薄膜的光电性能影响,并使用了XRD,UV-vis,M-S,光电流光谱(IPCE)等分析表征手段对薄膜进行了表征。实验结果表明,所制得的WO3薄膜为单斜晶系,退火后沿(200)晶面择优生长;对比所有沉积电位,-0.45 V沉积电位(vs.SCE)所获得的WO3薄膜均匀致密,薄膜的带边在460 nm(≈2.7 eV),其光电转换性能最好;在实验范围内薄膜越厚,其光电转换性能越好。     

脉冲激光沉积制备氧化铋薄膜的电致变色性质

通过电位阶跃和循环伏安结合现场电感偶合分光光度计(CCD)测量了脉冲激光沉积的四方结构Bi2O3薄膜的电致变色性质. 结果表明, 在波长为630 nm处出现一个明显的吸收峰, Bi2O3薄膜电极的着色时间为30 s. 吸光度-电位谱图表明, 当电位在3.5 - 0.7 V之间变化时, Bi2O3薄膜的颜色可明显地呈现由透明到暗棕色的可逆变化, 重复次数可达50 次, 在630 nm测得的着色效率约为15 cm2·C-1.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.