植物聚多糖葡甘聚糖的性质与应用

全面介绍了魔芋的主要成分———葡甘聚糖 (KonjacGlucomannan简称KGM)的结构、提纯方法、物理化学性质和其在医药卫生领域的保健功能及药用价值 ;综述了近年国内外的研究开发现状和其在食品、化工、纺织、医药、石油钻探等领域的应用 ,从而展示了KGM这一丰富的可再生资源的学术研究价值以及在医药、化工、纺织等领域中的广阔的应用前景     

高取代度魔芋葡甘聚糖醋酸酯的制备及其热塑性和流变性研究

以魔芋葡甘聚糖(KGM)为原料,浓硫酸为催化剂,乙酸酐为改性剂,制备了KGM醋酸酯.研究了反应条件对KGM醋酸酯取代度(DS)的影响,KGM醋酸酯制备的最佳反应条件是乙醇∶水量比5∶5,反应时间2h,反应温度75℃,催化剂浓硫酸的浓度0.1mol/L,KGM与乙酸酐的量比5∶40(g/mL),取代度高达2.93,其分子量与KGM相比,则明显降低.运用傅立叶红外光谱仪(FTIR)、X射线衍射仪(XRD)、扫描电镜(SEM)、热重分析仪(TGA)、示差扫描量热仪(DSC)和旋转流变仪对KGM和高取代度KGM醋酸酯进行了表征.结果表明,KGM醋酸酯的羰基(CO)特征吸收峰较KGM明显增强,其表观形貌大部分为疏松絮状,KGM及其醋酸酯均为非晶态结构.与KGM相比,KGM醋酸酯的热稳定性下降,分解温度(Td)由KGM的261.10℃降低至KGM醋酸酯的204.56℃,KGM醋酸酯出现了明显的玻璃化转变,其玻璃化转变温度(Tg)为128.49℃.KGM醋酸酯是典型的黏弹性材料,其弹性比率占21.27%,其剪切黏度η对温度变化非常敏感,可通过温度的改变来调节KGM醋酸酯的加工流动性.KGM醋酸酯具有较好的热塑性.     

以数字处理对魔芋葡甘聚糖膜面特征的初步研究

以天然生物材料为原料的绿色环保型膜材料取代塑料薄膜将是今后膜材料的发展趋势[1 4 ] 。从魔芋 (ＡｍｏｒｐｈｏｐａｌｌｕｓＫｏｎｊａｃＫ .ＫｏＣｈ)中提取出的魔芋精粉 ,其主要成分为葡甘聚糖 ,其优良的成膜性已引起人们的重视[4 5] 。分形维数在材料研究中得到了广泛的应用[6 ] ,本文以魔芋葡甘聚糖为主要原料制成膜 ,对膜的扫描电镜图象进行数字化处理 ,探讨膜面的微观形貌特征及制膜条件对膜面的影响。1　实验部分1 1　膜的制备以魔芋精粉 (四川安县魔芋精粉厂 )为主要原料 ,并添加明胶增强剂、甘油 (食品级 )增塑剂 (质量比为 1…     

羧甲基交联魔芋葡甘聚糖微球的制备与表征

采用交联魔芋葡甘聚糖颗粒(CKGG)合成了羧甲基交联魔芋葡甘聚糖微球(CMCKGG)，讨论了羧甲基化过程中的影响因素．用正交设计的方法确定了具有较好交换容量的CMCKGG制备奈件．当碱用量为CKGG量的20％，氯乙酸钠用量为CKGG量的10倍，温度55℃，反应时间8h时，制得的CMCKGG阳离子交换容量为0．7389mmol／g．红外光谱．光学显微镜和扫描电镜的结果表明，该颗粒为蜂窝状多孔微球，粒度均匀．     

基于脱乙酰基魔芋葡甘聚糖固定酶的葡萄糖传感器

制备了脱乙酰基魔芋葡甘聚糖(d-KGM)的溶胶-凝胶,用红外光谱表征了其脱乙酰基前后的结构转化.探讨了d-KGM溶胶-凝胶的制备条件对其成膜性能及酶固定化的影响.在此基础上将d-KGM用于电极表面葡萄糖氧化酶的固定,制备了相应的葡萄糖传感器,并对传感器的工作条件进行了优化.所制备的传感器灵敏度为240 nA/mmol/L,线性范围为0.1～8 mmol/L,表观米氏常数KM为19.6 mmol/L,稳定性好,寿命长.实验结果表明d-KGM是一种可用于生物传感器中酶固定化的优良材料.     

氧化魔芋葡甘聚糖的结构研究

以魔芋精粉为原料采用乙醇纯化法制得纯化魔芋葡甘聚糖,进一步用悬浮法和湿法制备氧化魔芋葡甘聚糖(O-KGM),采用DSC、XRD、SEM、IR、量子化学计算等方法对O-KGM的结构进行预测和表征。结果分析表明,氧化主要发生在糖残基的C(2)及C(3)位,O-KGM的特性粘度降至272.9 cm3/g,约为改性前的1/7,玻璃化温度及晶体熔融温度分别为61.5 和149.36 ℃,同时结晶度略有增加。     

微量寡糖的甲基化分析：用于魔芋葡甘多糖酶解产物的结构测定

本文研究了成功了１０－８０μｇ范围的寡糖甲基化方法。用庐方法并与快原子轰击质谱相结合，给出了魔芋葡甘多糖酶解后二糖、三糖异体的结构。     

鲜魔芋及其种植土壤中矿物元素的ICP-AES法测定

采用电感耦合等离子体原子发射光谱法（ICP－AES）测量了不同产区鲜魔芋球茎及其种植土壤中10种矿物元素的含量，并初步讨论其相关性；采用湿法消化处理样品并考察了不同元素测定的精密度、回收率；测定的相对标准偏差（RSD）均小于2％，回收率为95％－104％，结果可信度高。     

长链脂肪酸魔芋葡甘聚糖酯的制备及乳化性能研究

采用非均相酰化法制备了四个系列的长链脂肪酸魔芋葡甘聚糖酯（ＫＧＭＥ）．ＤＴＡ图显示了葡甘聚糖酯的晶态结构变化,Ｘ 射线衍射分析表明了不同长度的酰链对葡甘聚糖酯晶态结构的影响．初步研究了葡甘聚糖酯在芳香烃及环烷烃两种水包油（Ｏ／Ｗ）乳液体系中其取代度与乳化力的关系．实验证明在水包油乳液体系中,取代度在某一范围的葡甘聚糖酯显示出较好的乳化能力,且在高盐浓度和酸性情况下,仍给出好的乳化作用．丁香油 水（Ｏ／Ｗ）乳液体系在室温下静置四个星期未发现破乳分离现象     

Furyl- and thienyl-silatranes and germatranes

We review our research on the synthesis and study of the physical and biological properties of furyl- and thienylgermatranes and -silatranes.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 725–732, June, 1992.     

Review and patents and literature

The use of the insect cell/baculovirus expression system for producing recombinant proteins of bacterial, plant, insect, and mammalian origin has become widespread. The popularity of this eukaryotic expression system is due to many factors, including (1) potentially high protein expression levels, (2) ease and speed of genetic engineering, (3) ability to accommodate large DNA inserts, (4) protein processing similar to higher eukaryotic cells (e.g., mammalian cells), and (5) ease of insect cell growth (e.g., suspension growth). The following review of the literature discusses two engineering aspects of recombinant protein synthesis by insect cell cultures: bioreactor scale-up and insect cell line selection. Following this review patent abstracts and additional literature pertaining to expression of recombinant proteins in insect cell culture are listed.     

Ground- and excited-state aromaticity and antiaromaticity in benzene and cyclobutadiene

The aromaticity and antiaromaticity of the ground state (S 0), lowest triplet state (T 1), and first singlet excited state (S 1) of benzene, and the ground states (S 0), lowest triplet states (T 1), and the first and second singlet excited states (S 1 and S 2) of square and rectangular cyclobutadiene are assessed using various magnetic criteria including nucleus-independent chemical shifts (NICS), proton shieldings, and magnetic susceptibilities calculated using complete-active-space self-consistent field (CASSCF) wave functions constructed from gauge-including atomic orbitals (GIAOs). These magnetic criteria strongly suggest that, in contrast to the well-known aromaticity of the S 0 state of benzene, the T 1 and S 1 states of this molecule are antiaromatic. In square cyclobutadiene, which is shown to be considerably more antiaromatic than rectangular cyclobutadiene, the magnetic properties of the T 1 and S 1 states allow these to be classified as aromatic. According to the computed magnetic criteria, the T 1 state of rectangular cyclobutadiene is still aromatic, but the S 1 state is antiaromatic, just as the S 2 state of square cyclobutadiene; the S 2 state of rectangular cyclobutadiene is nonaromatic. The results demonstrate that the well-known "triplet aromaticity" of cyclic conjugated hydrocarbons represents a particular case of a broader concept of excited-state aromaticity and antiaromaticity. It is shown that while electronic excitation may lead to increased nuclear shieldings in certain low-lying electronic states, in general its main effect can be expected to be nuclear deshielding, which can be substantial for heavier nuclei.     

Hard and soft acids and bases: structure and process

Under investigation is the structure and process that gives rise to hard-soft behavior in simple anionic atomic bases. That for simple atomic bases the chemical hardness is expected to be the only extrinsic component of acid-base strength, has been substantiated in the current study. A thermochemically based operational scale of chemical hardness was used to identify the structure within anionic atomic bases that is responsible for chemical hardness. The base's responding electrons have been identified as the structure, and the relaxation that occurs during charge transfer has been identified as the process giving rise to hard-soft behavior. This is in contrast the commonly accepted explanations that attribute hard-soft behavior to varying degrees of electrostatic and covalent contributions to the acid-base interaction. The ability of the atomic ion's responding electrons to cause hard-soft behavior has been assessed by examining the correlation of the estimated relaxation energies of the responding electrons with the operational chemical hardness. It has been demonstrated that the responding electrons are able to give rise to hard-soft behavior in simple anionic bases.     

Determination and study on residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil

A QuEChERS (quick, easy, cheap, effective, rugged, and safe) method for the determination of benazolin-ethyl and quizalofop-p-ethyl in rape and soil by high-performance liquid chromatography-tandem mass spectrometry has been developed in this study. The residue and dissipation of benazolin-ethyl and quizalofop-p-ethyl in rape and soil were determined with the developed method. The half-lives of benazolin-ethyl in rape straw and soil were 3.7–5.1 days and 14.3–26.3 days, respectively. The half-lives of quizalofop-p-ethyl in rape straw and soil were 5.0-6.1 days and 0.3–9.7 days, respectively. The residue of benazolin-ethyl and quizalofop-p-ethyl in rapeseed and soil were below the detection limit (i.e., 0.5?mg?kg^?1, the maximum residue level of European Union for quizalofop-p-ethyl).     

Syntheses and structures of P-anilino-P-chalcogeno- and P-anilino-P-iminodiazasilaphosphetidines and their group 12 and 13 metal compounds

The P-anilino-P-chalcogeno(imino)diazasilaphosphetidines [Me(2)Si(mu-N(t)Bu)(2)P=E(NHPh)] (E = O (3), S (4), Se (5), N-p-tolyl (6)) were synthesized by oxidizing the P-anilinodiazasilaphosphetidine [Me(2)Si(N(t)Bu)(2)P(NHPh)] (2) with cumene hydroperoxide, sulfur, selenium, and p-tolyl azide, respectively. The lithium salt of 4 reacted with thallium monochloride to produce ([Me(2)Si(mu-N(t)Bu)(2)P=S(NPh)-kappaN-kappaS]Tl)(7), which features a two-coordinate thallium atom. Treatment of 4-6 with AlMe(3) gave the monoligand dimethylaluminum complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE]AlMe(2)) (E = S (8), Se (9), N-p-tolyl (10)), respectively. In these complexes the aluminum atom is tetrahedrally coordinated by one chelating ligand and two methyl groups, as a single-crystal X-ray analysis of 8 showed. A 2 equiv amount of 4-6 reacted with diethylzinc to produce the homoleptic diligand complexes ([Me(2)Si(mu-N(t)Bu)(2)P=E(NPh)-kappaN-kappaE](2)Zn)(E = S (11), Se (12), N-p-tolyl (13)). A crystal-structure analysis of 11 revealed a linear tetraspirocycle with a tetrahedrally coordinated, central zinc atom.