The exact solution for the general bending problems of conical shells on the elastic foundation

The general bending problem of conical shells on the elastic foundation (Winkler Medium) is not solved. In this paper, the displacement solution method for this problem is presented. From the governing differential equations in displacement form of conical shell and by introducing a displacement function U(s,θ), the differential equations are changed into an eight-order soluble partial differential equation about the displacement function U(s,θ) in which the coefficients are variable. At the same time, the expressions of the displacement and internal force components of the shell are also given by the displacement function U(s θ). As special cases of this paper, the displacement function introduced by V.S. Vlasov in circular cylindrical shell^[5], the basic equation of the cylindrical shell on the elastic foundation and that of the circular plates on the elastic foundation are directly derived.Under the arbitrary loads and boundary conditions, the general bending problem of the conical shell on the elastic foundation is reduced to find the displacement function U(s,θ).The general solution of the eight-order differential equation is obtained in series form. For the symmetric bending deformation of the conical shell on the elastic foundation, which has been widely usedinpractice,the detailed numerical results and boundary influence coefficients for edge loads have been obtained. These results have important meaning in analysis of conical shell combination construction on the elastic foundation,and provide a valuable judgement for the numerical solution accuracy of some of the same type of the existing problem.     

弹性地基板的无奇异边界元解法

本文用无奇异边界单元法,分析弹性地基上薄板的弯曲问题,考虑Winkler和双参数地基模型,选择第三类复变量的Bessel函数作为该问题的基本解,由此导出了一组权函数,在数值解法中,对面荷载积分项均统一化为边界积分,避免了在域内划分网格,文中还给出了一种考虑桩支承的边界元分析方法及域内点弯矩和接触应力的计算公式。     

Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的辛叠加解

研究Winkler地基上正交各向异性矩形薄板弯曲方程所对应的Hamilton正则方程, 计算出其对边滑支条件下相应Hamilton算子的本征值和本征函数系, 证明该本征函数系的辛正交性以及在Cauchy主值意义下的完备性, 进而给出对边滑支边界条件下Hamilton正则方程的通解, 之后利用辛叠加方法求出Winkler地基上四边自由正交各向异性矩形薄板弯曲问题的解析解. 最后通过两个具体算例验证了所得解析解的正确性.     

梯度弹性基础上正交异性薄板的弯曲

基于能量法和变分原理,采用双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板在分布载荷作用下的弯曲问题。首先,根据能量法与变分原理,给出了梯度弹性基础上正交异性薄板的弯曲微分平衡方程,并得到了梯度弹性基础刚度系数 与 的计算表达式;进而,假设 向正应力在厚度方向上均匀分布,推导了弹性基础 向位移衰减函数 的计算式。在算例中,通过将梯度弹性基础退化为均质基础,并与Vlazov模型对比,证明了本文理论的正确性;最后,求解了弹性模量呈幂律分布的梯度基础上薄板的挠度分布,分析了基础上下表层材料弹性模量比 与体积分数指数 对薄板挠度分布的影响。     

Dynamic response of beams on generalised elastic foundations

Dynamic responses of beams on generalised elastic foundations is studied using the method of Initial parameters. The foundation model proposed by Vlasov and Leontev is modified by incorporating in the analysis the horizontal displacements in the elastic foundation thus making it more general and physically close to the actual situation. Results are compared with those reported by Rades, using Pasternak's foundation model and Winkler's model. The insufficiency of the Winkler's model in the study of dynamic responses (mainly the bending moments) is emphasized. Solutions presented are quite general for application to beams on generalised elastic foundations subjected to arbitrary external dynamic loads and (or) moments.     

Bending of beams on three-parameter elastic foundation

The bending of a Timoshenko beam resting on a Kerr-type three-parameter elastic foundation is introduced, its governing differential equations are formulated and analytically solved, and the solutions are discussed and applied to particular problems. Parametric analyses of elastically supported beams of infinite and finite length are carried out and comparisons are made between one, two or three-parameter foundation models and more accurate 2D finite element models. In order to estimate the necessary soil parameters, an analytical procedure based on the modified Vlasov model is proposed. The presented solutions and applications show the superiority of the Kerr-type foundation model compared to one or two-parameter models.     

A parametric study for thick plates resting on elastic foundation with variable soil depth

The soil depth is generally considered to be constant for the analysis of plates resting on elastic foundation in the literature. However, it is most reasonable to have a variable subsoil depth as the plate dimensions get larger. In present study, linearly varying subsoil depth is considered as well as constant, linear and quadratic variation of modulus of elasticity with subsoil depth. Also, a parametric study is performed to demonstrate the behavior of thick plates on elastic foundations with variable soil depth. Modified Vlasov Model is used for the analysis of the plate foundation system, and 8-noded Mindlin plate element incorporating shear strain throughout plate thickness is used for the finite element model. Numerical examples are obtained from the literature to compare results and to show the influence of variable soil stratum depth on the behavior of plates. Displacements, bending moments, and shear forces are presented in tabular and graphical formats. As far as results are compared, it can be concluded that variable soil depth significantly affects the variation of the displacements and therefore the internal forces of the plate while keeping it constant ends up with unrealistic results.     

A free rectangular plate on elastic foundation

In the theory of elastic thin plates, the bending of a rectangular plate on the elastic foundation is also a difficult problem. This paper provides a rigorous solution by the method of superposition. It satisfies the differential equation, the boundary conditions of the edges and the free corners. Thus we are led to a system of infinite simultaneous equations. The problem solved is for a plate with a concentrated load at its center. The reactive forces from the foundation should be made to be in equilibrium with the concentrated force to see whether our calculation is correct or not.     

含孔von Karman板中非线性波散射与边值问题

基于ｖｏｎ Ｋａｒｍａｎ板大挠度弯曲理论,利用小参数摄动法,分析研究了含孔ｖｏｎＫａｒｍａｎ板的非线性波散射与动应力集中问题,其中一类可看成是薄板弯曲波动问题的控制方程。当有单频波入射时,由于弯曲应力与膜应力状态的非线性耦合,孔洞会产生高次谐波散射现象。建立了求解本问题的边界积分方程法,利用积分方程法交替求求这两类问题,最终可获得问题的近似分析解。     

弹性地基上含孔隙功能梯度材料板的自由振动和动力响应

为研究弹性地基上含孔隙的材料特性沿厚度呈Sigmoid函数变化的功能梯度材料(S-FGM)板的振动特性,本文基于改进的Voigt模型,分别建立了孔隙为均匀分布和非均匀分布两种类型的功能梯度材料的物性参数模型。根据复合材料薄板理论导出了弹性地基上含孔隙的功能梯度材料板的运动方程,用伽辽金法寻求四边简支边界条件下板自由振动和动力响应的解析解;讨论了孔隙、弹性地基参数、材料组分指数等因素对S-FGM板自由振动和动力响应的影响。结果表明:孔隙对板自振频率的影响比较复杂,不仅与孔隙率的大小和分布形式有关,还与弹性地基参数有关;当有弹性地基作用时,板的量纲归一化基频随着孔隙率的增大而提高,并且孔隙均匀分布的S-FGM板与孔隙非均匀分布的情况相比,其量纲归一化基频更高;孔隙增大了板的动力响应,其中孔隙为均匀分布的板的动力响应对孔隙率的变化更为敏感。     

Equilibrium of a Prestressed Strip Reinforced with Elastic Plates

The contact problem for a prestressed elastic strip reinforced with equally spaced elastic plates is considered. The Fourier integral transform is used to construct an influence function of a unit concentrated force acting on the infinite elastic strip with one edge constrained. The transmission of forces from the thin elastic plates to the prestressed strip is analyzed. On the assumption that the beam bending model and the uniaxial stress model are valid for an elastic plate subjected to both vertical and horizontal forces, the problem is mathematically formulated as a system of integro-differential equations for unknown contact stresses. This system is reduced to an infinite system of algebraic equations solved by the reduction method. The effect of the initial stresses on the distribution of contact forces in the strip under tension and compression is studied     

梯度弹性基础上正交异性薄板的屈曲分析

基于双参数弹性基础模型,研究了梯度弹性基础上正交异性薄板的屈曲问题. 首先,基于能量法与变分原理,给出了梯度弹性基础上正交异性薄板的屈曲控制方程,并得到了梯度弹性基础刚度系数K₁ 与K₂的计算式;进而,通过将位移函数采用三角函数展开的方法,给出了单向压缩载荷作用下、四边简支正交异性弹性基础板屈曲载荷的计算式;在算例中,通过将该文的解退化到单纯的正交异性板,并与经典弹性解比较,证明了理论的正确性;最后,求解了弹性模量在厚度方向上呈幂律分布的梯度基础上的薄板屈曲问题,分析了基础上下表层材料弹性模量比与体积分数指数对屈曲载荷的影响.     

Finite Deflection of Skew Sandwich Plates on Elastic Foundations by the Galerkin Method

ABSTRACT

Application of the Galerkin method to various fluid and structural mechanics problems that are governed by a single linear or nonlinear differential equation is well known [1-5]. Recently, the method has been extended to finite element formulations [6-10], In this paper the suitability of the Galerkin method for solution of large deflection problems of plates is studied. The method is first applied to investigate large deflection behavior of clamped isotropic plates on elastic foundations. After validity of the method is established, it is then extended to analyze problems of large deflection of clamped skew sandwich plates, both with and without elastic foundations. The plates are considered to be subjected to uniformly distributed loads. The governing differential equations for the sandwich plate in terms of displacements in Cartesian coordinates are first established and then transformed into skew coordinates. The nonlinear differential equations of the plates are then transformed into nonlinear algebraic equations, using the Galerkin method. These equations are solved using a Newton-Raphson iterative procedure. The parameters considered herein for large deflection behavior of skew sandwich plates are the aspect ratio of the plate, Poisson's ratio, skew angle, shearing stiffnesses of the core, and foundation moduli. Numerical results are presented for skew sandwich plates for various skew angles and aspect ratios. Simplicity and quick convergence are the advantages of the method, in comparison with other much more laborious numerical methods that require extensive computer facilities.     

Bending of an Anisotropic Elliptic Plate on an Elastic Foundation

An approach is proposed to solve a stress–strain problem for anisotropic rigidly fixed plates on an elastic foundation. The problem is solved by the method of successive approximations. At each approximation, the deflection is represented as polynomials whose coefficients are determined from a system of linear algebraic equations. Study is made of the influence of the reinforcement angle and the modulus of subgrade reaction on the deflections and the bending moments in an orthotropic plate.     

Elasticity solutions for a transversely isotropic functionally graded circular plate subject to an axisymmetric transverse load qrk

This paper considers the bending of transversely isotropic circular plates with elastic compliance coefficients being arbitrary functions of the thickness coordinate, subject to a transverse load in the form of qr^k (k is zero or a finite even number). The differential equations satisfied by stress functions for the particular problem are derived. An elaborate analysis procedure is then presented to derive these stress functions, from which the analytical expressions for the axial force, bending moment and displacements are obtained through integration. The method is then applied to the problem of transversely isotropic functionally graded circular plate subject to a uniform load, illustrating the procedure to determine the integral constants from the boundary conditions. Analytical elasticity solutions are presented for simply-supported and clamped plates, and, when degenerated, they coincide with the available solutions for an isotropic homogenous plate. Two numerical examples are finally presented to show the effect of material inhomogeneity on the elastic field in FGM plates.     

Dynamic stress concentrations in thick plates with two holes based on refined theory

Based on complex variables and conformal mapping, the elastic wave scat- tering and dynamic stress concentrations in the plates with two holes are studied by the refined dynamic equation of plate bending. The problem to be solved is changed to a set of infinite algebraic equations by an orthogonM function expansion method. As examples, under free boundary conditions, the numerical results of the dynamic moment concen- tration factors in the plates with two circular holes are computed. The results indicate that the parameters such as the incident wave number, the thickness of plates, and the spacing between holes have great effects on the dynamic stress distributions. The results are accurate because the refined equation is derived without any engineering hypothese.     

双参数弹性地基板计算新方法

弹性地基板的弯曲问题,尤其是自由边板,一直是学者和工程师们所十分关切的问题。本文用无单元法研究双参数弹性地基板的弯曲问题,由最小二乘法和变分原理导出了双参数弹性地基板的无单元法刚度短阵,编制相应的无单元法计算程序,并给出计算实例。结果表明本方法精度良好,可求出任意荷载作用下板中任一点的挠度、转角、弯矩和扭矩,且有广泛的工程应用前景。     

基于无网格法的非均匀弹性地基上变厚度加筋板弯曲与固有频率分析

采用基于移动最小二乘近似的无网格方法并结合一阶剪切变形理论,分析了非均匀弹性地基上变厚度加筋板的弯曲和固有频率问题.首先,用节点对变厚度板和筋条分别进行离散,导出变厚度板和筋条的势能;其次,利用筋条与变厚度板之间的位移协调条件将筋条的节点参数转换为板的节点参数,再将两者的势能进行叠加得到变厚度加筋板的总势能,并根据能量法得到其动能;最后,利用最小势能原理及Hamilton原理分别得到弯曲控制方程与振动控制方程.由于采用的方法不能直接施加位移边界,故采用完全转换法处理位移边界.本文先计算变厚度板的弯曲及非均匀弹性地基板的固有频率,与文献对比验证方法的有效性;然后对非均匀弹性地基上变厚度加筋板弯曲与 自由振动进行了计算,并将计算结果与有限元结果进行了对比.结果表明,本文方法计算所得结果与文献解及有限元结果之间的误差均小于5％,验证了该方法在计算非均匀弹性地基上变厚度加筋板弯曲与固有频率问题的有效性.     

考虑地基耦合效应时中厚矩形板的非线性自由振动分析

基于各向同性中厚板理论，考虑板的非线性效应和地基耦合效应．应用Hamilton变分原理，建立了双参数地基上周边自由中厚矩形板的非线性运动控制方程，提出了一组满足问题全部边界条件的试函数。应用伽辽金法和谐波平衡法对方程进行求解。讨论了板的结构参数和地基的物理参数对弹性地基上周边自由中厚矩形板的非线性自由振动特性的影响。     

Nonsymmetrical large deformation bending problem of circular thin plates

To begin with, in this paper, the displacement governing equations and the boundary conditions of nonsymmetrical large deflection problem of circular thin plates are derived. By using the transformation and the perturbation method, the nonlinear displacement equations are linearized, and the approximate boundary value problems are obtained. As an example, the nonlinear bending problem of circular thin plates subjected to comparatively complex loads is studied.