用晶体弹塑性有限单元法研究双晶金属拉伸变形

本文从单晶体应力-应变关系的精确实验结果和多晶体滑移特性出发,建立相应的计算模型,并采用微观力学和晶体弹塑性有限单元法,研究双晶金属试样的拉伸变形,得到其应力-应变曲线,晶体内滑移变形和应力分布规律,以及晶界影响区对它们的影响。     

基于多弹簧模型的空间梁柱单元(I):理论模型

引入多轴应力状态下的塑性应力-应变关系理论,在单元模型中考虑了弹塑性区域剪切变形对单元的弹塑性刚度影响,推导了考虑剪切变形弹塑性刚度影响的多弹簧模型的空间梁柱单元刚度矩阵,为整体钢框架结构的弹塑性动力分析奠定了单元基础。     

基于多弹簧模型的空间梁柱单元(Ⅰ):理论模型

引入多轴应力状态下的塑性应力-应变关系理论,在单元模型中考虑了弹塑性区域剪切变形对单元的弹塑性刚度影响,推导了考虑剪切变形弹塑性刚度影响的多弹簧模型的空间粱柱单元刚度矩阵,为整体钢框架结构的弹塑性动力分析奠定了单元基础.     

杆件有限变形时的泊松比

在有限变形时，对不同配对的应力与应变，如还采用小应变时的泊松比，则体积比会出现不合理现象，因此泊松比也要随应变而变     

冻土的有限变形本构关系的实验研究

根据有限变形理论,给出了冻土三轴蠕变实验数据处理时所需Green应变和Kirchhoff应力的计算公式,并根据冻土三轴蠕变实验结果给出冻土的有限变形本构关系及其蠕变参数。通过对冻土的实验数据对比分析可知:在相同试验条件下,应变较小时,小应变ε1 和Green应变Ez的数值几乎相等,随着应变的增加,两种表征方式的计算结果差别越来越大,可见对于冻土如果不考虑试件变形前后长度的变化,计算得出的应变偏离实际变形情况较大,因此冻土材料的本构关系采用有限变形表征更确切。根据冻土的有限变形本构关系计算得到的冻结壁内侧最大径向位移更接近实测结果,因此冻结壁设计计算依据冻土的有限变形本构关系更为合理。对今后冻结工程的设计具有参考价值。     

三维有限变形线性光弹性材料研究

制成了１５％应变量的三维有限变形线性光弹性材料，可供对橡胶类零件的应力分析之用；在该材料中，以尼龙６作内含体，可以制作初应力很小的三维有限变形复合光弹性模型。     

一种从离散模拟到连续介质弹性模拟的过渡方法

提出了一种从离散分子动力学模拟(MD)到连续介质弹性有限元计算分析(FEA)的过渡方法, 简称MD-FEA方法. 首先通过MD计算获得晶体材料原子的移动位置, 然后根据晶体结构的周期性特征构造连续介质假设下的有限单元变形模型, 进一步结合材料的力学行为本构关系获得应变和应力场. 为了检验MD-FEA方法的有效性, 将该方法应用于详细分析Al-Ni软硬组合两相材料纳米柱体的拉伸变形问题和基底材料为Al球形压头材料为金刚石的纳米压痕问题. 采用MD-FEA方法获得了上述两种问题的应力?应变场, 并将计算结果分别与传统MD方法中通过变形梯度计算的原子应变以及原子的位力应力进行了比较, 详细讨论了用MD-FEA方法计算的应力?应变场与传统MD原子应变和位力应力的区别, 并对MD-FEA方法的有效性及其相较于传统MD方法所具有的优势进行了探讨. 结论显示, MD-FEA方法与传统MD方法在应力?应变变化平缓的区域得到的结果接近, 但在变化剧烈的区域以及材料的表/界面区域, MD-FEA方法能够得到更加精确的结果. 同时, MD-FEA方法避免了传统MD方法中, 需要人为选取截断半径以及加权函数所导致的误差. 另外, 当应变较大时, MD-FEA方法计算的小应变与传统MD方法计算的格林应变存在一定差异, 因此, MD-FEA方法更适合应变较小的情形.      

以Atluri应力和左伸长张量为共轭变量的有限弹性广义变分原理

本文提出了以Atluri应力张量和左伸长张量为共轭应力应变量的有限弹性变形广义变分原理。     

计算St.Venant扭转时K_Ⅱ的任意高阶奇应变单元

Wilson W.K.提出的高阶奇应变圆单元(SSC)把有限单元法和裂纹尖端附近的线弹性解析解结合起来,能够成功地计算应力强度因子K_Ⅰ或K_Ⅱ.Holston A.Jr.进一步用奇应变单元来计算混合型应力强度因子K_Ⅰ K_Ⅲ。至于用奇应变单元来计算应力强度因子K_Ⅲ,原则上也是类同的,Hilton P.D.有过介绍。郑州机械研究所曾用来计算转子受扭时内孔的径向裂纹的K_Ⅲ。但是他们所     

基于颗粒离散元法的连接键应变软化模型及其应用

基于颗粒间的有限接触假设,提出了可表述颗粒间力、力矩传递的连接键模型. 为了表征连接键的塑性、损伤及断裂过程,在连接键中引入了考虑应变软化效应的Mohr-Coulomb 准则及最大拉应力准则. 单一连接键的单向拉伸测试及直剪测试表明了上述连接键应变软化模型的计算精度. 研究了颗粒体系的宏观应变能与颗粒平均配位数的对应关系. 通过计算发现,对于二维颗粒体系,当平均配位数为5 时,颗粒体系的宏观应变能与相同参数下连续介质方法(如有限元等) 计算获得的应变能基本一致. 利用上述连接键应变软化模型对岩石的单轴压缩过程进行了模拟,计算结果表明:岩石单轴压缩的应力应变曲线经历了线性上升段、非线性上升段、非线性下降段及缓变段等4 个阶段,并给出了上述4 个阶段与岩石内部损伤破裂状态的内在联系. 计算结果还表明,随着断裂应变的增大,岩石的破裂模式逐渐由拉剪复合型破裂向单一压剪型破裂转化;随着断裂应变的增大,峰值应力及达到峰值应力时的应变均逐渐增大,但峰值时的破裂度及终态时的破裂度将逐渐减小.      

采用共旋应变的三维热弹塑性有限变形有限元法

本文采用线性化共旋应变张量和增率型虚功原理，建立了有限变形热力耦合弹塑性有限元法。在该方法中，材料的流动应力取为应变总量、应变速率和温度的函数，推导了包含这种函数关系的本构矩阵。另外在温度场分析中，考虑了塑性功和摩擦功转化的热量。文后给出的算例表明该方法可以很好地模拟热加工过程。     

The finite element method of viscoelastic large deformation plane problem with Kirchhoff stress tensors-Green strain tensors constitutive relation

Based upon the updated Lagrangian approach, the principle of virtual work denoted by the updated Kirchhoff stress increment tensors and the updated Green strain increment tensors and the integral constitutive relation expressed by Kirchhoff stress tensors and Green strain tensors are used and the viscoelastic large deformation incremental variational equation is derived. By means of the 8-nodes isoparametric finite element the program of two-dimensional problem is written. Good agreement is found among the results obtained from this paper and other literatures.     

考虑塑性和刚度不匹配的焊接残余应力估算

现有残余应力计算方法未能考虑材料塑性变形和焊接接头刚度不匹配的影响,使得焊接残余应力计算结果和实际残余应力存在较大偏差.在2219-T87铝合金钨极氩弧焊焊接头残余应力测试基础上,提出一种基于非线性有限元和材料弹性模量分区的残余应力—释放应变曲线的残余应力计算方法,研究了材料塑性变形和接头刚度不匹配对焊接残余应力计算的影响.结果表明,焊接接头中非均质材料塑性不匹配可以引起对于残余应力计算的较大误差;材料塑性变形对残余应力的影响大于接头刚度不匹配对残余应力的影响.所提出方法修正了传统方法在焊接接头的残余应力计算中由于未考虑接头非均质材料塑性不匹配而引起的误差.     

GEOMETRICALLY NONLINEAR FINITE ELEMENT MODEL OF SPATIAL THIN-WALLED BEAMS WITH GENERAL OPEN CROSS SECTION

Based on the theory of Timoshenko and thin-walled beams, a new finite element model of spatial thin-walled beams with general open cross sections is presented in the paper, in which several factors are included such as lateral shear deformation, warp generated by nonuni- form torsion and second-order shear stress, coupling of flexure and torsion, and large displacement with small strain. With an additional internal node in the element, the element stiffness matrix is deduced by incremental virtual work in updated Lagrangian （UL） formulation. Numerical examples demonstrate that the presented model well describes the geometrically nonlinear property of spatial thin-walled beams.     

温度循环应力剖面对QFP焊点热疲劳寿命的影响

采用统一型粘塑性Anand本构方程描述了QFP(四方扁平封装)焊点的粘塑性力学行为,利用有限元分析软件建立组装在印制电路板上QFP的有限元模型,通过研究焊点内部总应变范围的变化进而研究温度循环应力剖面各个参数对焊点热疲劳寿命的影响,为设计合理的温度循环应力剖面提供了理论依据。     

Finite-element formulations for problems of large elastic-plastic deformation

An Eulerian finite element formulation is presented for problems of large elastic-plastic flow. The method is based on Hill's variational principle for incremental deformations, and is ideally suited to isotropically hardening Prandtl-Reuss materials. Further, the formulation is given in a manner which allows any conventional finite element program, for “small strain” elastic-plastic analysis, to be simply and rigorously adapted to problems involving arbitrary amounts of deformation and arbitrary levels of stress in comparison to plastic deformation moduli. The method is applied to a necking bifurcation analysis of a bar in plane-strain tension.The paper closes with a unified general formulation of finite element equations, both Lagrangian and Eulerian, for large deformations, with arbitrary choice of the conjugate stress and strain measures. Further, a discussion is given of other proposed formulations for elastic-plastic finite element analysis at large strain, and the inadequacies of some of these are commented upon.     

An interfacial energy incorporated couple stress crystal plasticity and the finite element simulation of grain subdivision

A couple stress crystal plasticity formulation that incorporates interfacial couple stress energy was proposed in terms of the virtual work-rate principle for finite element method. By applying the assumed constitutive models of couple stress at the grain boundary as well as the grain interior, finite element simulations were conducted for various crystal models, with different grain subdivision models to examine how plastic deformation work is affected by grain subdivision from the interfacial couple stress energy effect.Finite element simulation results showed that the amount of predicted plastic deformation work depends on grain subdivision, and that the amount of work can be minimized for a particular grain subdivision. We inferred from the simulation results that actual grain subdivision might correspond to the minimum amount of plastic deformation work and, if this correlation is validated, actual grain subdivision might be predicted based on the interfacial energy incorporated couple stress crystal plasticity.     

高分子材料平面应变拉伸变形局部化

将基于应变软化玻璃状高分子材料微观特征建立的ＢＰＡ８－链分子网络模型引入ＵｐｄａｔｉｎｇＬａｇｒａｎｇｅ有限元方法，建立了适于变形局部化分析的大变形弹塑性有限元驱动应力法．在此基础上，数值模拟了初始各向同性高分子材料平面应变拉伸变形局部化的传播过程．探讨了ＢＰＡ模型对具有加工硬化特性的结晶性高分子材料变形分析的适应性；分析了局部化传播过程中颈缩截面的非均匀应力三轴效应；最后，讨论了网格尺寸以及初始几何不均匀性对颈缩扩散以及应力三轴效应的影响     

Numerical study of the plastic behaviour in tension of welds in high strength steels

The influence of the mismatch between material properties and constraint on the plastic deformation behaviour of the heat affected zone of welds in high strength steels is investigated in this study, using finite element simulations. An elastoplastic implicit three-dimensional finite element code (EPIM3D) was used in the analysis. The paper presents the mechanical model of the code and the methodology used for the numerical simulation of the tensile test of welded joints. Numerical results of the tensile test of welded samples with different hypothetical widths for the Heat Affected Zone and various material mismatch levels are shown. The analysis concerns the overall strength and ductility of the joint and in relation to the plastic behaviour of the heat affected zone. The influence of the yield stress, tensile strength and constraint on the stress and plastic strain distribution in the soft heat affected zone is also discussed.     

一种求解方管稳定性问题的简化方法

采用材料力学中的平面弯曲理论、以及弹性理论中平面应力问题和平面应变问题的转换关系，分析方管在均匀外压作用下的变形、临界压力和应力，得到了方管最大变形、临界压力和最大应力的求解公式．运用有限元分析软件Marc建立有限元模型，分析了方管在外压作用下的变形、临界压力和应力情况．分析结果表明，最大应力出现在凹角处，最大位移出现在各面的中截面处，并将有限元解与本文解作比较，从而验证文本解的正确性．