Analysis method of planar interface cracks of arbitrary shape in three-dimensional transversely isotropic magnetoelectroelastic bimaterials

Using the fundamental solutions for three-dimensional transversely isotropic magnetoelectroelastic bimaterials, the extended displacements at any point for an internal crack parallel to the interface in a magnetoelectroelastic bimaterial are expressed in terms of the extended displacement discontinuities across the crack surfaces. The hyper-singular boundary integral–differential equations of the extended displacement discontinuities are obtained for planar interface cracks of arbitrary shape under impermeable and permeable boundary conditions in three-dimensional transversely isotropic magnetoelectroelastic bimaterials. An analysis method is proposed based on the analogy between the obtained boundary integral–differential equations and those for interface cracks in purely elastic media. The singular indexes and the singular behaviors of near crack-tip fields are studied. Three new extended stress intensity factors at crack tip related to the extended stresses are defined for interface cracks in three-dimensional transversely isotropic magnetoelectroelastic bimaterials. A penny-shaped interface crack in magnetoelectroelastic bimaterials is studied by using the proposed method.The results show that the extended stresses near the border of an impermeable interface crack possess the well-known oscillating singularity r^?1/2±iε or the non-oscillating singularity r^?1/2±κ. Three-dimensional transversely isotropic magnetoelectroelastic bimaterials are categorized into two groups, i.e., ε-group with non-zero value of ε and κ-group with non-zero value of κ. The two indexes ε and κ do not coexist for one bimaterial. However, the extended stresses near the border of a permeable interface crack have only oscillating singularity and depend only on the mechanical loadings.     

A viscoplastic study of crack-tip deformation and crack growth in a nickel-based superalloy at elevated temperature

Viscoplastic crack-tip deformation behaviour in a nickel-based superalloy at elevated temperature has been studied for both stationary and growing cracks in a compact tension (CT) specimen using the finite element method. The material behaviour was described by a unified viscoplastic constitutive model with non-linear kinematic and isotropic hardening rules, and implemented in the finite element software ABAQUS via a user-defined material subroutine (UMAT). Finite element analyses for stationary cracks showed distinctive strain ratchetting behaviour near the crack tip at selected load ratios, leading to progressive accumulation of tensile strain normal to the crack-growth plane. Results also showed that low frequencies and superimposed hold periods at peak loads significantly enhanced strain accumulation at crack tip. Finite element simulation of crack growth was carried out under a constant ΔK-controlled loading condition, again ratchetting was observed ahead of the crack tip, similar to that for stationary cracks.A crack-growth criterion based on strain accumulation is proposed where a crack is assumed to grow when the accumulated strain ahead of the crack tip reaches a critical value over a characteristic distance. The criterion has been utilized in the prediction of crack-growth rates in a CT specimen at selected loading ranges, frequencies and dwell periods, and the predictions were compared with the experimental results.     

ASYMPTOTIC ANALYSIS OF MODE Ⅱ STATIONARY GROWTHCRACK ON ELASTIC-ELASTIC POWER LAWCREEPING BIMATERIAL INTERFACE

A mechanical model was established for mode Ⅱ interfacial crack static growingalong an elastic-elastic power law creeping bimaterial interface. For two kinds of boundaryconditions on crack faces, traction free and frictional contact, asymptotic solutions of thestress and strain near tip-crack were given. Results derived indicate that the stress andstrain have the same singularity, there is not the oscillatory singularity in the field; thecreep power-hardening index n and the ratio of Young‘s module notably influence the crack-tip field in region of elastic power law creeping material and n only influences distribution ofstresses and strains in region of elastic material. When n is bigger, the creepingdeformation is dominant and stress fields become steady, which does not change with n.Poisson‘s ratio does not affect the distributing of the crack-tip field.     

Interface crack-tip generalized stress field and stress intensity factors in transversely isotropic piezoelectric bimaterials

Transversely isotropic piezoelectric (TIP) bimaterials with an impermeable interface crack have been classified [Int. J. Frac. 119 (2003) L41] into two classes corresponding to the vanishing of the two singularity parameters or κ. It is shown in the present paper that the related eigenvalue problems for either =0 or κ=0 are not degenerate. The crack-tip generalized stress fields are obtained subsequently. A new definition of crack-tip intensity factors is presented for interface cracks in practical TIP bimaterial of practical interest. Such defined intensity factors are real numbers, which dominate the maximum crack-tip stress singularity and do not generate any phase angle change under any dimension system transformation for physical quantities.     

垂直于界面V型缺口尖端的应力奇异性及其应用

基于双材料垂直于界面V型缺口理论,给出了单一材料和双材料裂纹问题、V型缺口问题应力强度因子的统一定义,得到了应力外推法计算双材料K_I的公式,数值算例验证了本文方法的有效性.以双材料单向拉伸和三点弯曲模型为对象,深入研究了双材料中弹性模量、泊松比、缺口深度、缺口张角对缺口尖端奇异应力场的影响,获得了一定范围内各种参数变化对缺口尖端奇异应力场的影响规律,为异体材料形成的V型缺口在应力断料中的应用提供了必要的参考依据.     

双材料界面裂纹的改进广义有限差分法

采用数值方法进行断裂力学分析时,裂纹尖端奇异区域处理的好坏直接关系到最终断裂力学参数的求解精度。与传统均匀介质不同,复合材料界面裂纹渐近位移和应力场表现出剧烈的振荡特性,许多用于表征经典的平方根和负平方根物理场渐近性的传统方法也因此失效。论文提出了一种改进的广义有限差分法,该方法基于多元函数泰勒级数展开和移动最小二乘法的思想,将节点变量的各阶导数由相邻点集函数的加权线性累加来近似,具有无网格、无数值积分、数据准备简单、稀疏矩阵快速求解等优点。为提高该方法求解断裂力学问题的计算精度和数值稳定性,论文引入了裂尖奇异区域局部点簇的自动创建技术和一种基于局部点簇几何尺寸的矩阵正则化算法。数值算例表明,所提算法稳定,效率高,在不增加计算量的前提下,显著提高了裂尖近场力学参量和断裂力学参数的求解精度和数值稳定性。     

界面裂纹问题中的弹性T项和应力强度因子

研究两相材料有限板含单边界面裂纹的断裂力学特性，对不同的材料组合用广义变分法分析了不同尺寸试件和裂纹长度下的应力强度因子和弹性T项，讨论了材料特性对应力强度因子和弹性T项的作用．分析了试件尺寸和裂纹长度对应力强度因子和弹性T项的影响．     

Experimental analysis of crack tip fields in rubber materials under large deformation

A three-nested-deformation model is proposed to describe crack-tip fields in rubber-like materials with large deformation.The model is inspired by the distribution of the measured in-plane and out-of-plane deformation.The inplane displacement of crack-tip fields under both Mode I and mixed-mode(Mode I-II) fracture conditions is measured by using the digital Moire’ method.The deformation characteristics and experimental sector division mode are investigated by comparing the measured displacement fields under different fracture modes.The out-of-plane displacement field near the crack tip is measured using the three-dimensional digital speckle correlation method.     

双材料界面裂纹复应力强度因子的正则化边界元法

双材料界面裂纹渐近位移和应力场表现出剧烈的振荡特性, 许多用于表征经典平方根($r^{1/2})$和负平方根($r^{-1/2})$渐近物理场的传统数值方法失效, 给界面裂纹复应力强度因子($K_{1} +{i}K_{2} )$的精确求解增加了难度. 引入一种含有复振荡因子的新型"特殊裂尖单元", 可精确表征裂纹尖端渐近位移和应力场的振荡特性, 在避免裂尖区域高密度网格剖分的情况下, 可实现双材料界面裂纹复应力强度因子的精确求解. 此外, 结合边界元法中计算近奇异积分的正则化算法, 成功求解了大尺寸比(超薄)双材料界面裂纹的断裂力学参数. 数值算例表明, 所提算法稳定, 效率高, 在不增加计算量的前提下, 显著提高了裂尖近场力学参量和断裂力学参数的求解精度和数值稳定性.      

Experimental investigation of GH singularity field of the growing crack-tip for different ductile metals

The displacementsu _x ,u _y inx, y directions at growing crack tip of the specimens with double edge cracks for four different alumium alloys and two coppers are measured by using moire method and optical spatial filtering technique. From experimental displacement fields, the displacement singularity fields are obtained and compared with GH theoretical field. Unknown constantsA and _yo in theoretical solution are determined from experimental data. The theoretical singularity field thus compared is given for plane-stress, mode-I, strain-hardening materials. The error in both the experimental and theoretical evaluations is within ± 10%. The experiments show that there exists dominant singularity region around a growing crack-tip. In the experiments, the strain hardening indexn amounts from 3.158 to 14. The shape of this dominant region ranges from butterfly wing to oblate or circular shape. The size and shape of GH dominant region depend on the material property, the specimen geometry and loading type. Inside GH-field, there is a 3-D deformed damage zone, where no GH singularity exists. Very near to the crack-tip, there is a fracture process zone.The project is supported by the National Science Foundation of China.     

Inhomogeneity effects on the crack driving force in elastic and elastic-plastic materials

This article evaluates the effect of material inhomogeneities on the crack-tip driving force in general inhomogeneous bodies and reports results for bimaterial composites. The theoretical model, based on Eshelby material forces, makes no assumptions about the distribution of the inhomogeneities or the constitutive properties of the materials. Inhomogeneities are modeled by making the stored energy have an explicit dependence on the reference coordinates. Then the material inhomogeneity effect on the crack-tip driving force is quantified by the term C_inh, which is the integral of the gradient of the stored energy in the direction of crack growth. The model is demonstrated by two model problems: (i) bimaterial elastic composite using asymptotic solutions and (ii) graded elastic and elastic-plastic compact tension specimen using numerical methods for stress analysis.     

Effect of crack-tip shape on the near-tip field in glassy polymer

The physical nature of a crack tip is not absolutely sharp but blunt with finite curvature. In this paper, the effects of crack-tip shape on the stress and deformation fields ahead of blunted cracks in glassy polymers are numerically investigated under Mode I loading and small scale yielding conditions. An elastic–viscoplastic constitutive model accounting for the strain softening upon yield and then the subsequently strain hardening is adopted and two typical glassy polymers, one with strain hardening and the other with strain softening–rehardening are considered in analysis. It is shown that the profile of crack tip has obvious effect on the near-tip plastic field. The size of near-tip plastic zone reduces with the increase of curvature radius of crack tip, while the plastic strain rate and the stresses near crack tip enhance obviously for two typical polymers. Also, the plastic energy dissipation behavior near cracks with different curvatures is discussed for both materials.     

ASYMPTOTIC ANALYSIS OF MODE Ⅱ STATIONARY GROWTH CRACK ON ELASTIC-ELASTIC POWER LAW CREEPING BIMATERIAL INTERFACE

A mechanical model was established for mode Ⅱ interfacial crack static growing along an elastic-elastic power law creeping bimaterial interface. For two kinds of boundary conditions on crack faces, traction free and frictional contact, asymptotic solutions of the stress and strain near tip-crack were given. Results derived indicate that the stress and strain have the same singularity, there is not the oscillatory singularity in the field; the creep power-hardening index n and the ratio of Young' s module notably influence the cracktip field in region of elastic power law creeping material and n only influences distribution of stresses and strains in region of elastic material. When n is bigger, the creeping deformation is dominant and stress fields become steady, which does not change with n.Poisson ' s ratio does not affect the distributing of the crack- tip field.     

Role of elasticity in elastic–plastic fracture: Analytical bi-linear crack-tip fields and finite element analysis

A solution for Model-I plane strain crack tip fields in a bi-linear elastic–plastic material is presented. The elastic–plastic Poisson's ratio is introduced to characterize the influence of elastic deformation on the near tip constraint. Attention is focused on the distribution of elastic/plastic strain energy in the sensitive region of the forward sector ahead of a crack tip. The present study shows that the elastic strain energy can be higher than the plastic strain energy in this sensitive sector while large amount of the plastic strain energy develops outside this sector around the crack tip. The effect of elastic deformation in this sensitive region on the structure of crack-tip fields is considerable and the assumption in some important solutions for crack-tip fields reported in literature that the elastic deformation is small and can be ignored is therefore not physically reasonable. Besides, finite element analysis is carried out to validate the analytical solution and good agreement between them is found. It is seen that the present solution with T-stress can properly describe the crack-tip fields under various constraints for different specimens and an analytical relation is established between the critical value of J-integral, J_c, and T-stress for elastic–plastic fracture.     

Crack propagation along the interface of piezoelectric bimaterial

This paper is concerned with the propagation of a crack along the interface of a piezoelectric bimaterial, which can travel at subsonic or intersonic speed. The inertial effects are taken into account while the static approximation is applied to the electric fields. The effect of piezoelectricity on the asymptotic crack-tip field is discussed for an interface crack propagating subsonically and intersonically. An alternative method is used to avoid solving for the eigenvectors. This paper provides a unified method to analyze the crack-tip field of a crack propagating along a piezoelectric bimaterial interface.     

韧性金属裂纹尖端损伤区内应变场测量——数字散斑相关法应用

本文用数字散斑相关方法测量了五种不同幂硬化指数韧性金属材料(铝和铜),双边裂纹尖端细观区域内应变场.对所得结果用韧性损伤模型进行了分析.在此法中以金属自然表面结构为散斑场,不同加载状态的散斑场进行比较,得到相对变形与应变.图象之间相关性 C 是变形参数或是位移及其导数的泛函.使其相关性 C 取最大值的试凑变形即为其真实变形场.这一方法在细观测量中应用得到满意的结果.     

裂纹面摩擦接触引起的断裂韧性增长的研究

采用弹黏塑性的材料本构关系, 建立了压、剪混合型裂纹常速准静 态扩展的力学模型, 求得了裂纹面摩擦接触条件下裂纹尖端场的数值解, 并基于数 值结果讨论了扩展裂纹的摩擦效应. 计算和分析表明, 裂纹面的摩擦效应主要表现 在两个方面. 第一方面是摩擦会导致裂纹尖端区材料的断裂韧性增高, 并且裂纹面间的摩擦作用越强, 增韧效果越显著. 摩擦增韧的机制可以解释为裂纹 面间的摩擦作用导致裂纹尖端塑性区尺寸变大, 使裂纹尖端场的塑性变形能增加, 从而使得裂纹尖端区材料增韧. 摩擦生热并不是导致材料断裂韧性增长的根本机制. 第二方面是摩擦会导致``断裂延缓'. 利用裂纹面的摩擦来提高构件的承载能力和延长构件的服役寿命具有较大的工程实用价值.     

Effect of constraint induced by crack depth on creep crack-tip stress field in CT specimens

In this paper, the effect of constraint induced by the crack depth on creep crack-tip stress field in compact tension (CT) specimens is examined by finite element analysis, and the effect of creep deformation and damage on the Hutchinson–Rice–Rosengren (HRR) singularity stress field are discussed. The results show the constraint induced by crack depth causes the difference in crack-tip opening stress distributions between the specimens with different crack depth at the same C*. The maximum opening stress appears at a distance from crack tips, and the stress singularity near the crack tips does not exist due to the crack-tip blunting caused by the large creep deformation in the vicinity of the crack tips. The actual stress calculated by the finite element method (FEM) in front of crack tip is significantly lower than that predicted by the HRR field. Based on the reference stress field in the deep crack CT specimen with high constraint, a new constraint parameter R is defined and the constraint effect in the shallow crack specimen is examined at different distances ahead of the crack tip from transient to steady-state creep conditions. During the early stages of creep constraint increases with time, and then approaches a steady state value as time increases. With increasing the distance from crack tips and applied load, the negative R increases and the constraint decreases.     

有限尺寸下双材料界面附近裂纹位置对裂纹尖端的影响

随着复合材料的应用和发展,不同材料组成的界面结构越来越受到人们的重视。界面层两侧材料的性能相异会引起材料界面端奇异性,同时界面和界面附近存在裂纹会引起裂尖处的应力奇异性。因此双材料界面附近的力学分析是比较复杂的。本文建立双材料直角界面模型,在材料界面附近预设初始裂纹,计算了有限材料尺寸对界面应力场及其附近裂纹应力强度因子的影响。运用弹性力学中的 Goursat 公式求得直角界面端在有限尺寸下的应力场以及其应力强度系数。通过叠加原理和格林函数法进一步得到在直角界面端附近的裂纹尖端应力强度因子。计算结果表明,在适当范围内改变材料内裂纹与界面之间的距离,界面附近裂纹尖端的应力强度因子随着裂纹与界面距离的增加而减少,并且逐渐趋于稳定。分析结果可以为预测双材料结构复合材料界面失效位置提供参考。     

Continuing crack-tip deformation and fracture for plane-strain crack growth in elastic-plastic solids

Analysis of the deformation field consistent with a Prandtl stress distribution travelling with an advancing plane-strain crack reveals the functional form of the near tip crack profile in an elastic-plastic solid. The crack opening δ is shown to have the form δ ～ r In (const./r) at a distance r from the tip. This observation coupled with data generated from finite element investigations of growing cracks in small-scale yielding permits the construction of a relation characterizing the deformation at an extending crack tip. A ductile crack-growth criterion consisting of the attainment of a critical opening at a small characteristic material distance from the tip is adopted. Predictions of the stability of a growing crack for both small-scale yielding specimens and those subject to general yielding are discussed.