作大范围空间运动柔性梁的刚-柔耦合动力学

研究带中心刚体的作大范围空间运动梁的刚-柔耦合动力学问题．从精确的应变-位移关系式出发，在动力学变分方程中，考虑了横截面转动的惯性力偶和与扭转变形有关的弹性力的虚功率，用速度变分原理建立了考虑几何非线性的空间梁的刚-柔耦合动力学方程，用有限元法进行离散．通过对空间梁系统的数值仿真研究扭转变形和截面转动惯量对系统动力学性态的影响．     

计及热应变的空间曲梁的刚-柔耦合动力学

研究带中心刚体的作大范围运动的空间曲梁的刚-柔耦合动力学.结合混合坐标法和绝对坐标法的特点,取与中心刚体大范围运动有关的变量和柔性梁各单元节点相对中心刚体连体基的位移和斜率作为广义坐标,建立了一种新的柔性梁的刚柔耦合模型.基于精确的应变和位移的关系式,根据Jourdian速度变分原理,建立了带中心刚体柔性曲梁的有限元离散的动力学方程.数值对比了空间曲梁系统和空间直梁系统的刚柔耦合动力学性质,用能量守恒规律验证了文中曲梁模型的合理性.在此基础上,在应变能中计及热应变,研究温度增高引起的曲梁的热膨胀对系统的动力学性态的影响.     

计及剪切变形的Timoshenko梁的刚-柔耦合动力学

研究带中心刚体的Timoshenko梁的刚-柔耦合动力学问题。从力学的基本原理出发,基于Timoshenko梁假设,用虚功原理建立了带中心刚体的柔性梁的刚-柔耦合动力学方程。仿真计算结果表明,随着梁的惯量矩和横截面积比逐渐增大,剪切变形对梁的刚-柔耦合动力学性态产生了一定的影响。此外,本文还对不计剪切变形的Euler-Bernoulli梁假设的适用性进行了研究。     

中心刚体-变截面梁系统的动力学特性研究

对在平面内做大范围转动的中心刚体-变截面梁系统的动力学进行了研究.考虑柔性梁横向弯曲变形和纵向伸长变形, 且在纵向位移中计及由于横向变形而引起的纵向缩短项, 即非线性耦合变形项. 采用假设模态法描述变形, 运用第二类Lagrange方程推导得到系统刚柔耦合动力学方程. 在此基础上对做大范围旋转运动的中心刚体-楔形梁以及中心刚体-梯形梁模型的动力学进行了详细研究. 研究表明: 梁宽比、梁高比以及梯形梁变截面位置都对系统的动力学特性有很大影响.      

作大范围运动弹性梁刚—柔耦合动力学建模

利用弹性梁的变形理论和 Hamilton力学原理对作大范围运动弹性梁的刚 -柔耦合动力学建模理论进行了研究。分析了大范围运动对弹性梁的横向振动和纵向振动的影响 ,得到了大范围运动与弹性梁的中线耦合变形之间的耦合作用对该系统动力学性质有显著的影响 ,从而提出了作大范围运动弹性梁的刚柔耦合动力学模型     

旋转中心刚体-FGM梁刚柔热耦合动力学特性研究

对旋转中心刚体-功能梯度材料(functionally graded material,FGM)梁刚柔热耦合动力学特性进行研究.FGM梁为物理性能参数沿厚度方向呈幂律分布的欧拉伯努利梁.考虑柔性梁的横向弯曲变形和轴向拉伸变形, 并计入横向弯曲变形引起的纵向缩短,即非线性耦合变形量.考虑变截面空心梁在外部高温、内冷通道冷却情况下的热力耦合对系统动力学特性的影响,求解得到FGM梁沿厚度方向分布的温度场, 进而在本构关系中计入热应变.采用假设模态法对柔性梁变形场进行离散,运用第二类拉格朗日方程推导得到系统的刚柔热耦合动力学方程,并编制动力学仿真软件, 然后通过仿真算例对系统的动力学问题进行研究.结果表明:不同截面梁动力学响应差异较大, 因此需对实际系统合理建模;大范围运动已知时, 考虑热冲击载荷的FGM梁将有效抑制横向弯曲变形,而大范围运动恒定时随热冲击的叠加会出现高频振荡; 大范围运动未知时,外力矩和热冲击载荷相互作用产生热力耦合效应, 导致系统呈现高频振荡,同时与中心刚体大范围旋转运动产生刚柔热耦合效应.      

柔性体的刚-柔耦合动力学分析

对柔性梁的刚－柔耦合动力学特性进行分析，从连续介质力学理论出发，在纵向变形位移中计及了耦合变形量，用Jourdain速度变分原理导出了柔性梁的刚－柔耦合动力学方程，定量地研究了非惯性系下柔性梁的动力学性质，比较了在不同转速下零次近似模型和耦合模型的振动频率的差异。为了确定零次近似模型的适用范围，引入与转速和基点加速度有关的相关系数，提出了零次近似模型的适用判据为相关系数小于0．1。在此基础上，进一步研究在大范围运动是自由的情况下柔性梁的大范围运动和变形运动的耦合机理，计算了带平动刚体的柔性梁的大范围运动规律，揭示零次近似模型和耦合模型的刚－柔耦合动力学性质的根本差异。     

刚-柔耦合动力学系统的建模理论研究

刚－柔耦合动力学系统的传统的混合坐标方法是零次近似方法,在建模过程中,直接套用的结构动力学的小变形假设,忽略了变形位移的高次耦合变形量．本文对柔性梁建立较零次近似更精确的高次耦合动力学模型,从连续介质力学理论出发,在变形位移中,计及横向位移引起的轴向缩短,导出变形位移的二次耦合量．用一致质量有限元方法对梁进行离散,基于Jourdain速度变分原理导出大范围运动为自由的柔性梁的刚－柔耦合动力学方程．计算了柔性重力摆的角速度和摆端点的横向变形,揭示零次近似模型和耦合模型的刚－柔耦合动力学性质的根本差异．     

基于初应力法的作大范围运动柔性梁动力学建模理论研究

研究了初应力法的作大范围运动柔性梁的建模理论.根据连续介质理论,考虑应变-位移中的非线性项,用一致质量有限元法对柔性梁进行离散,基于Jourdain速度变分原理导出定轴转动下大范围运动为自由的柔性梁刚-柔耦合动力学方程.从其刚柔耦合动力学方程出发,考虑在大范围运动已知情况下的结构动力学方程.通过引入准静态概念,把其结构动力学方程转化为准静态方程.对纵向和横向变形节点坐标进行坐标分离,解出与纵向变形相关的准静态方程,得到准静态时的纵向应力表达式,从而获得附加刚度项.并对此非惯性系下作大范围运动柔性梁的结构动力学方程进行数值仿真,对零次近似模型、一次近似模型、初应力法动力学模型的仿真结果进行分析,揭示三种模型的动力学性质的差异.     

一类刚-柔耦合系统的建模与稳定性研究

对于由中心刚体带有柔性梁附件组成的这一类简单刚 柔耦合系统，目前文献广泛采用的Ｅｕｌｅｒ Ｂｅｒｎｏｕｌｉ梁模型中考虑的刚 柔运动耦合项有严重的缺陷．本文对于物理本构关系线性的有限变形梁，分别采用微元法和变分法建立了该系统大挠度非线性动力学方程组．本文使用严格的方法来研究此非线性耦合动力学模型，采用能量 动量矩组合方法构成Ｌｉａｐｕｎｏｖ函数，严格证明了此非线性系统平凡解的积分范数稳定性以及具有鲜明物理意义的最大模范数稳定性．本文对文献中引用的三类线性化模型，采用假设模态法，对中心刚体匀速转动时梁的振动作了数值仿真，进一步验证了本文的结论．上述结果，对选择刚 柔耦合系统正确的动力学模型是有益的．     

Thermal effect on the deformation of a flexible beam with large kinematical driven overall motions

The research investigates the transient longitudinal and transverse deformation of a planar flexible beam with large overall motions in a temperature field. With the increase of temperature, longitudinal deformation is caused by the thermal expansion in axial direction. Due to the coupling of longitudinal and transverse deformation, the transverse deformation is induced, which is significant in cases where temperature increases rapidly in a very short period. Furthermore, the transverse temperature gradient, which is caused by the temperature variation in the transverse direction, may lead to transverse deformation. Considering the thermal strain, equations of motion of a flexible beam with arbitrary large overall motion are derived based on virtual work principle. The high order terms of the strain tensor are taken into account, such that the geometric nonlinear deformation terms are included in the dynamic equations. Simulation results of a rotating beam are shown to reveal the thermal effect and nonlinear effect on the dynamic performance of the beam.     

Geometric nonlinear formulation for thermal-rigid-flexible coupling system

This paper develops geometric nonlinear hybrid formulation for flexible multibody system with large deformation considering thermal efect. Diferent from the conventional formulation, the heat flux is the function of the rotational angle and the elastic deformation, therefore, the coupling among the temperature, the large overall motion and the elastic deformation should be taken into account. Firstly,based on nonlinear strain–displacement relationship, variational dynamic equations and heat conduction equations for a flexible beam are derived by using virtual work approach,and then, Lagrange dynamics equations and heat conduction equations of the first kind of the flexible multibody system are obtained by leading into the vectors of Lagrange multiplier associated with kinematic and temperature constraint equations. This formulation is used to simulate the thermal included hub-beam system. Comparison of the response between the coupled system and the uncoupled system has revealed the thermal chattering phenomenon. Then, the key parameters for stability, including the moment of inertia of the central body, the incident angle, the damping ratio and the response time ratio, are analyzed. This formulation is also used to simulate a three-link system applied with heat flux. Comparison of the results obtained by the proposed formulation with those obtained by the approximate nonlinear model and the linear model shows the significance of considering all the nonlinear terms in the strain in case of large deformation. At last, applicability of the approximate nonlinear model and the linear model are clarified in detail.     

耦合变形对大范围运动柔性梁动力学建模的影响

柔性梁在作大范围空间运动时,产生弯曲和扭转变形,这些变形的相互耦合形成了梁在纵向以及横向位移的二次耦合变量。本文考虑了变形产生的几何非线性效应对运动柔性梁的影响,在其三个方向的变形中均考虑了二次耦合变量,利用弹性旋转矩阵建立了准确的几何非线性变形方程,通过Lagrange方程导出系统的动力学方程。仿真结果表明,在大范围运动情况下,仅在纵向变形中计及了变形二次耦合量的一次动力学模型,与考虑了完全几何非线性变形的模型具有一定的差异。     

Geometric nonlinear formulation for curved beams with varying curvature

Based on exact Green strain of spatial curved beam, the nonlinear strain-displacement relation for plane curved beam with varying curvature is derived. Instead of using the previous straight beam elements, curved beam elements are used to approximate the curved beam with varying curvature. Based on virtual work principle, rigid-flexible coupling dynamic equations are obtained. Physical experiments were carried out to capture the large overall motion and the strain of curved beam to verify the present rigid-flexible coupling formulation for curved beam based on curved beam element. Numerical results obtained from simulations were compared with those results from the physical experiments. In order to illustrate the effectiveness of the curved beam element methodology, the simulation results of present curved beam elements are compared with those obtained by previous straight beam elements. The dynamic behavior of a slider-crank mechanism with an initially curved elastic connecting rod is investigated. The advantage of employing generalized-α method is pointed out and the special nonlinear dynamic characteristics of the curved beam are concluded.     

Nonlinear vibration of functionally graded graphene-reinforced composite laminated beams resting on elastic foundations in thermal environments

Modeling and nonlinear vibration analysis of graphene-reinforced composite (GRC) laminated beams resting on elastic foundations in thermal environments are presented. The graphene reinforcements are assumed to be aligned and are distributed either uniformly or functionally graded of piece-wise type along the thickness of the beam. The motion equations of the beams are based on a higher-order shear deformation beam theory and von Kármán strain displacement relationships. The beam–foundation interaction and thermal effects are also included. The temperature-dependent material properties of GRCs are estimated through a micromechanical model. A two-step perturbation approach is employed to determine the nonlinear-to-linear frequency ratios of GRC laminated beams. Detailed parametric studies are carried out to investigate the effects of material property gradient, temperature variation, stacking sequence as well as the foundation stiffness on the linear and nonlinear vibration characteristics of the GRC laminated beams.     

Nonlinear low-velocity impact on damped and matrix-cracked hybrid laminated beams containing carbon nanotube reinforced composite layers

This paper investigates the low-velocity impact response of a shear deformable laminated beam which contains both carbon nanotube reinforced composite (CNTRC) layers and carbon fiber reinforced composite (CFRC) layers. The effect of matrix cracks is considered, and a refined self-consistent model is selected to describe the degraded stiffness caused by the damage. The beam including damping effects rests on a two-parameter elastic foundation in thermal environments. Based on a higher-order shear deformation theory and von Kármán nonlinear strain–displacement relationships, the motion equations of the beam and impactor are established and solved by means of a two-step perturbation approach. The material properties of both CFRC layers and CNTRC layers are assumed to be temperature-dependent. To assess engineering application of this hybrid structure, two conditions for outer CNTRC layers and outer CFRC layers are compared. Besides, the effects of the crack density, volume fraction of carbon nanotube, temperature variation, the foundation stiffness and damping on the nonlinear low-velocity impact behavior of hybrid laminated beams are also discussed in detail.

     

弹性曲梁在机械和热载荷共同作用下的几何非线性模型及其数值解

基于Euler-Bernoulli梁的几何非线性理论,建立了弹性曲梁在任意分布机械载荷和热载荷共同作用下的几何非线性静平衡控制方程。该模型不仅计及了轴线伸长,同时也精确地考虑了梁的初始曲率对变形的影响以及轴向变形与弯曲变形之间的相互耦合效应。应用打靶法数值求解了半圆形曲梁在横向均匀升温作用下的非线性弯曲问题,数值比较了轴向伸长对曲梁变形的影响。     

中心舱体与薄壁梁刚-柔耦合系统的热弹性-结构动力学分析

空间柔性结构受太阳热流冲击而诱发的振动是导致航天器失效的典型模式之一,准确预测结构热致振动的响应及稳定性是卫星设计的基础。针对常见的中心舱体与附属薄壁杆件组成的空间结构,提出了考虑刚-柔耦合、耦合热弹性和耦合热-结构三重耦合效应的热致振动分析理论模型。其中,刚-柔耦合是指舱体姿态角、顶端集中质量转动与柔性附件运动的耦合;耦合热弹性是指应变率与温度场的耦合;耦合热-结构是指舱体转动及结构变形与薄壁杆件吸收太阳热流的耦合。基于热弹性理论和Lagrange方程,推导了传热和运动的耦合方程;采用Laplace变换方法并使用Routh-Hurwitz稳定判据推导了稳定性边界方程。结果表明,该模型能够更为准确的给出热致振动响应及稳定性预测。