共查询到18条相似文献,搜索用时 265 毫秒
1.
相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果. 相似文献
2.
含中心裂纹正交各向异性有限大板的反平面剪切问题 总被引:1,自引:0,他引:1
本文采用边界配置方法计算了含中心裂纹正交各向异性有限大板问题的应力强度因子。在其特例——材料各向同性情形,本文结果与[2]采用Fourier变换方法所得结果一致;同时,本文给出了不同材料参数和裂纹长度情形的计算结果。 相似文献
3.
基于扩展有限元的应力强度因子的位移外推法 总被引:1,自引:0,他引:1
针对平面裂纹问题,阐述了扩展有限元法的单元位移模式、推导了扩展有限元法的控制方程、介绍了特殊单元的数值积分技术.基于最小二乘法,建立了应力强度因子位移外推法的计算公式.利用MATLAB编写计算程序,对平面裂纹问题用扩展有限元法进行了计算.基于扩展有限元法的计算结果,分别利用位移外推法和相互作用积分法,对平面裂纹的应力强度因子进行了计算.计算结果表明,位移外推法比相互作用积分法能更方便和准确地计算平面裂纹的应力强度因子. 相似文献
4.
本文提供了一个求解含孔边裂纹正交各向异性板应力强度因子的复变一广义变分方法.首先建立满足所有弹性力学基本方程式和裂纹表面边界条件的应力与位移级数表达式.然后应用广义变分原理满足其余边界条件从而确定应力强度因子.计算表明,级数收敛迅速,结果与有限元法非常一致,而所需机时较少. 相似文献
5.
应用随机边界元法分析材料弹性常数的随机性和裂纹面随机性对应力强度因子的影响。文中首先简介了随机边界元法,给出了具有随机材料或几何参数的弹性体的边界位移或面力的协方差,进而给出了材料参数和裂纹面随机时应力强度因子均值和方差的计算公式。算例中详细讨论了杨氏模量、泊松比及裂纹面的随机性对应力强度因子的影响。 相似文献
6.
直接计算应力强度因子的扩展有限元法 总被引:2,自引:0,他引:2
系统地给出了直接计算应力强度因子的扩展有限元法。该方法以常规有限元法为基础,利用单位分解法思想,通过在近似位移表达式中增加能够反映裂纹面的不连续函数及反映裂尖局部特性的裂尖渐进位移场函数,间接体现裂纹面的存在,从而无需使裂纹面与有限元网格一致,无需在裂尖布置高密度网格,也不需要后处理就可以直接计算出应力强度因子,并且大大简化了前后处理工作。最后通过两个简单算例验证了该方法的精度,分析了影响计算结果的因素,并与采用J积分计算的应力强度因子作了对比,得出了两种方法计算精度相当的结论。 相似文献
7.
《力学学报》2017,(6)
比例边界有限元侧面上有任意荷载时,将侧面载荷分解成关于径向方向局部坐标的多项式函数的和,推导给出了考虑侧面载荷存在的新型形函数,并基于该形函数推导了刚度矩阵和等效节点载荷列阵.首次对比例边界有限元法求解裂纹面接触问题进行了研究,运用Lagrange乘子引入接触界面约束条件,推导给出了比例边界有限元求解裂纹面接触问题的控制方程.将裂纹面单元分为非裂尖单元和含有侧面的裂尖单元.在非裂尖单元中的裂纹面,裂纹面作为多边形单元的边界,边界上的接触力可等效到节点上,通过在节点上构造Lagrange乘子,采用点对点接触约束进行处理.对于含有侧面的裂尖单元,在整个侧面上构造Lagrange乘子的插值场,采用边对边接触约束进行处理.对三个不同的接触约束状态下的算例进行了数值计算,通过与解析解及有限元软件ABAQUS计算结果的对比,验证了本文提出的比例边界有限元点对点和边对边接触求解裂纹面接触问题的精确性与有效性. 相似文献
8.
比例边界有限元侧面上有任意荷载时,将侧面载荷分解成关于径向方向局部坐标的多项式函数的和,推导给出了考虑侧面载荷存在的新型形函数,并基于该形函数推导了刚度矩阵和等效节点载荷列阵.首次对比例边界有限元法求解裂纹面接触问题进行了研究,运用Lagrange乘子引入接触界面约束条件,推导给出了比例边界有限元求解裂纹面接触问题的控制方程.将裂纹面单元分为非裂尖单元和含有侧面的裂尖单元.在非裂尖单元中的裂纹面,裂纹面作为多边形单元的边界,边界上的接触力可等效到节点上,通过在节点上构造Lagrange乘子,采用点对点接触约束进行处理.对于含有侧面的裂尖单元,在整个侧面上构造Lagrange乘子的插值场,采用边对边接触约束进行处理.对三个不同的接触约束状态下的算例进行了数值计算,通过与解析解及有限元软件ABAQUS计算结果的对比,验证了本文提出的比例边界有限元点对点和边对边接触求解裂纹面接触问题的精确性与有效性. 相似文献
9.
利用权函数法推导了围压和径向荷载共同作用下,考虑裂纹面摩擦的预制裂纹巴西盘应力强度因子计算公式,从理论上分析了围压、径向荷载和裂纹面摩擦对巴西盘应力强度因子的影响。结果表明,围压对I型应力强度因子有很大影响,I型应力强度因子随围压的增大而减小。当裂纹面闭合后围压和摩擦系数对II型应力强度因子同样具有显著影响,考虑裂纹面有效剪应力的权函数法理论解与有限元数值解相吻合,表明理论分析的正确性。 相似文献
10.
梯度材料中矩形裂纹的对偶边界元方法分析 总被引:2,自引:0,他引:2
采用对偶边界元方法分析了梯度材料中的矩形裂纹. 该方法基于层状材料基本解,以非裂纹边界的位移和面力以及裂纹面的间断位移作为未知量. 位移边界积分方程的源点配置在非裂纹边界上,面力边界积分方程的源点配置在裂纹面上. 发展了边界积分方程中不同类型奇异积分的数值方法. 借助层状材料基本解,采用分层方法逼近梯度材料夹层沿厚度方向力学参数的变化. 与均匀介质中矩形裂纹的数值解对比,建议方法可以获得高精度的计算结果. 最后,分析了梯度材料中均匀张应力作用下矩形裂纹的应力强度因子,讨论了梯度材料非均匀参数、夹层厚度和裂纹与夹层之间相对位置对应力强度因子的影响. 相似文献
11.
比例边界有限元法SBFEM(Scaled Boundary Finite Element Method)是一种半解析数值方法,在裂缝分析特别是强度因子计算上具有相当高的精度。本文提出了一种用于裂缝分析的基于虚拟结构面的SBFEM与常规FEM的耦合分析方法。首先选取裂缝周边一定范围的计算域,并将结构分成不含裂缝区域和含裂缝区域两部分。然后,对不含裂缝区域,采用FEM进行网格离散;对含裂缝区域,采用SBFEM进行网格离散;两者相互独立,在这两个域内,分别采用各自相应的位移模式。最后通过在SBFEM网格的外边界设置虚拟耦合结构面的模式,实现有限元网格和比例边界有限元网格的耦合。通过两个经典的含裂缝平板的算例研究,探讨了本文方法在I型开裂和混合型开裂分析中,影响应力强度因子精度的因素。算例表明,SBFEM具有的降维和半解析性质,使本文方法在裂缝分析中的前处理简单易行,且计算结果具有相当高的计算精度。 相似文献
12.
结合了扩展有限元法(extended finite elementmethods,XFEM)和比例边界有限元法(scaled boundary finite elementmethods,SBFEM)的主要优点,提出了一种改进型扩展比例边界有限元法(improvedextended scaled boundary finite elementmethods,$i$XSBFEM),为断裂问题模拟提供了一条新的途径.类似XFEM,采用两个正交的水平集函数表征材料内部裂纹面,并基于水平集函数判断单元切割类型;将被裂纹切割的单元作为SBFE的子域处理,采用SBFEM求解单元刚度矩阵,从而避免了XFEM中求解不连续单元刚度矩阵需要进一步进行单元子划分的缺陷;同时,借助XFEM的主要思想,将裂纹与单元边界交点的真实位移作为单元结点的附加自由度考虑,赋予了单元结点附加自由度明确的物理意义,可以直接根据位移求解结果得出裂纹与单元边界交点的位移;对于含有裂尖的单元,选取围绕裂尖单元一圈的若干层单元作为超级单元,并将此超级单元作为SBFE的一个子域求解刚度矩阵,超级单元内部的结点位移可通过SBFE的位移模式求解得到,应力强度因子可基于裂尖处的奇异位移(应力)直接获得,无需借助其他的数值方法.最后,通过若干数值算例验证了建议的$i$XSBFEM的有效性,相比于常规XFEM,$i$XSBFEM的基于位移范数的相对误差收敛性较好;采用$i$XSBFEM通过应力法和位移法直接计算得到的裂尖应力强度因子均与解析解吻合\较好. 相似文献
13.
The scaled boundary finite element method (SBFEM) is a novel semi-analytical technique that combines the advantages of the finite element method and the boundary element method with unique properties of its own. This method has proven very efficient and accurate for determining the stress intensity factors (SIFs) for mode I and mode II two-dimensional crack problems. One main reason is that the SBFEM has a unique capacity of analytically representing the stress singularities at the crack tip. In this paper the SBFEM is developed for mode III (out of plane deformation) two-dimensional fracture anMysis. In addition, cubic B-spline functions are employed in this paper for constructing the shape functions in the circumferential direction so that higher continuity between elements is obtained. Numerical examples are presented at the end to demonstrate the simplicity and accuracy of the present approach for mode Ⅲ two-dimensional fracture analysis. 相似文献
14.
《International Journal of Solids and Structures》2014,51(11-12):2096-2108
The dynamic stress and electric displacement intensity factors of impermeable cracks in homogeneous piezoelectric materials and interface cracks in piezoelectric bimaterials are evaluated by extending the scaled boundary finite element method (SBFEM). In this method, a piezoelectric plate is divided into polygons. Each polygon is treated as a scaled boundary finite element subdomain. Only the boundaries of the subdomains need to be discretized with line elements. The dynamic properties of a subdomain are represented by the high order stiffness and mass matrices obtained from a continued fraction solution, which is able to represent the high frequency response with only 3–4 terms per wavelength. The semi-analytical solutions model singular stress and electric displacement fields in the vicinity of crack tips accurately and efficiently. The dynamic stress and electric displacement intensity factors are evaluated directly from the scaled boundary finite element solutions. No asymptotic solution, local mesh refinement or other special treatments around a crack tip are required. Numerical examples are presented to verify the proposed technique with the analytical solutions and the results from the literature. The present results highlight the accuracy, simplicity and efficiency of the proposed technique. 相似文献
15.
Zhenjun Yang 《Acta Mechanica Sinica》2006,22(3):243-256
The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors (SIFs) directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled.
The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.The project supported by the National Natural Science Foundation of China (50579081) and the Australian Research Council (DP0452681)The English text was polished by Keren Wang. 相似文献
16.
《Acta Mechanica Solida Sinica》2017,(2)
A reined global-local approach based on the scaled boundary inite element method(SBFEM) is proposed to improve the accuracy of predicted singular stress ield. The proposed approach is carried out in conjunction with two steps. First, the entire structure is analyzed by employing an arbitrary numerical method. Then, the interested region, which contains stress singularity, is re-solved using the SBFEM by placing the scaling center right at the singular stress point with the boundary conditions evaluated from the irst step imposed along the whole boundary including the side-faces. Beneiting from the semi-analytical nature of the SBFEM, the singular stress ield can be predicted accurately without highly reined meshes. It provides the FEM or other numerical methods with a rather simple and convenient way to improve the accuracy of stress analysis. Numerical examples validate the effectiveness of the proposed approach in dealing with various kinds of problems. 相似文献
17.
An experimental-numerical hybrid method for the stress separation in photoelasticity is proposed in this study. In the proposed
method, boundary conditions for a local finite element model, that is, tractions along boundaries are inversely determined
from photoelastic fringes. Two algorithms are proposed for determining the boundary condition. One is a linear algorithm in
which the tractions are obtained by the method of linear least-squares from both principal stress difference and principal
direction. Another is the nonlinear algorithm in which the tractions are determined only from the principal stress difference.
After determining the boundary conditions for the local finite element model, the stresses can be obtained by finite element
direct analysis. The effectiveness is demonstrated by applying the proposed method to a perforated plate under tension and
contact problems. Results show that the boundary conditions of the local finite element model can be determined from the photoelastic
fringes and then the individual stresses can be obtained by the proposed method. Furthermore, the stresses can be evaluated
even if the boundary condition is complicated such as at the contact surface. It is expected that the proposed method can
be powerful tool for stress analysis. 相似文献
18.
引入了一种求解波导本征值问题的高效而精确算法-比例边界有限元方法SBFEM (Scaled Boundary Finite Element Method).该方法的一个特点是只需在边界上进行离散,问题降低一维,使计算工作量大大减少;另一特点是所建立的控制方程为二阶常微分方程,可以解析地求解,使计算精度得到了保证.论文利用变分原理并通过比例边界坐标变换,推导了TE波和TM波波导的比例边界有限元频域方程以及波导动剐度方程,同时给出了波导动刚度矩阵的连分式解形式,通过引入辅助变量进一步得出波导特征值方程并求出波导本征值.以矩形、L形波导和叶型加载矩形波导的本征问题分析为例,通过与解析解及其他数值方法比较,结果表明,此方法具有精度高、计算工作量小的优点,而且随着连分式阶数增加收敛速度快.进一步分析了一类角切四脊正方形波导的传输特性. 相似文献