改进型扩展比例边界有限元法

结合了扩展有限元法(extended finite elementmethods,XFEM)和比例边界有限元法(scaled boundary finite elementmethods,SBFEM)的主要优点,提出了一种改进型扩展比例边界有限元法(improvedextended scaled boundary finite elementmethods,$i$XSBFEM),为断裂问题模拟提供了一条新的途径.类似XFEM,采用两个正交的水平集函数表征材料内部裂纹面,并基于水平集函数判断单元切割类型;将被裂纹切割的单元作为SBFE的子域处理,采用SBFEM求解单元刚度矩阵,从而避免了XFEM中求解不连续单元刚度矩阵需要进一步进行单元子划分的缺陷;同时,借助XFEM的主要思想,将裂纹与单元边界交点的真实位移作为单元结点的附加自由度考虑,赋予了单元结点附加自由度明确的物理意义,可以直接根据位移求解结果得出裂纹与单元边界交点的位移;对于含有裂尖的单元,选取围绕裂尖单元一圈的若干层单元作为超级单元,并将此超级单元作为SBFE的一个子域求解刚度矩阵,超级单元内部的结点位移可通过SBFE的位移模式求解得到,应力强度因子可基于裂尖处的奇异位移(应力)直接获得,无需借助其他的数值方法.最后,通过若干数值算例验证了建议的$i$XSBFEM的有效性,相比于常规XFEM,$i$XSBFEM的基于位移范数的相对误差收敛性较好;采用$i$XSBFEM通过应力法和位移法直接计算得到的裂尖应力强度因子均与解析解吻合\较好.      

裂缝分析的比例边界有限元与有限元耦合的虚拟结构面模型

比例边界有限元法SBFEM(Scaled Boundary Finite Element Method)是一种半解析数值方法,在裂缝分析特别是强度因子计算上具有相当高的精度。本文提出了一种用于裂缝分析的基于虚拟结构面的SBFEM与常规FEM的耦合分析方法。首先选取裂缝周边一定范围的计算域,并将结构分成不含裂缝区域和含裂缝区域两部分。然后,对不含裂缝区域,采用FEM进行网格离散;对含裂缝区域,采用SBFEM进行网格离散;两者相互独立,在这两个域内,分别采用各自相应的位移模式。最后通过在SBFEM网格的外边界设置虚拟耦合结构面的模式,实现有限元网格和比例边界有限元网格的耦合。通过两个经典的含裂缝平板的算例研究,探讨了本文方法在I型开裂和混合型开裂分析中,影响应力强度因子精度的因素。算例表明,SBFEM具有的降维和半解析性质,使本文方法在裂缝分析中的前处理简单易行,且计算结果具有相当高的计算精度。     

Application of scaled boundary finite element method in static and dynamic fracture problems

The scaled boundary finite element method (SBFEM) is a recently developed numerical method combining advantages of both finite element methods (FEM) and boundary element methods (BEM) and with its own special features as well. One of the most prominent advantages is its capability of calculating stress intensity factors (SIFs) directly from the stress solutions whose singularities at crack tips are analytically represented. This advantage is taken in this study to model static and dynamic fracture problems. For static problems, a remeshing algorithm as simple as used in the BEM is developed while retaining the generality and flexibility of the FEM. Fully-automatic modelling of the mixed-mode crack propagation is then realised by combining the remeshing algorithm with a propagation criterion. For dynamic fracture problems, a newly developed series-increasing solution to the SBFEM governing equations in the frequency domain is applied to calculate dynamic SIFs. Three plane problems are modelled. The numerical results show that the SBFEM can accurately predict static and dynamic SIFs, cracking paths and load-displacement curves, using only a fraction of degrees of freedom generally needed by the traditional finite element methods.The project supported by the National Natural Science Foundation of China (50579081) and the Australian Research Council (DP0452681)The English text was polished by Keren Wang.     

CRACK FACE CONTACT PROBLEM ANALYSIS USING THE SCALED BOUNDARY FINITE ELEMENT METHOD

比例边界有限元侧面上有任意荷载时,将侧面载荷分解成关于径向方向局部坐标的多项式函数的和,推导给出了考虑侧面载荷存在的新型形函数,并基于该形函数推导了刚度矩阵和等效节点载荷列阵.首次对比例边界有限元法求解裂纹面接触问题进行了研究,运用Lagrange乘子引入接触界面约束条件,推导给出了比例边界有限元求解裂纹面接触问题的控制方程.将裂纹面单元分为非裂尖单元和含有侧面的裂尖单元.在非裂尖单元中的裂纹面,裂纹面作为多边形单元的边界,边界上的接触力可等效到节点上,通过在节点上构造Lagrange乘子,采用点对点接触约束进行处理.对于含有侧面的裂尖单元,在整个侧面上构造Lagrange乘子的插值场,采用边对边接触约束进行处理.对三个不同的接触约束状态下的算例进行了数值计算,通过与解析解及有限元软件ABAQUS计算结果的对比,验证了本文提出的比例边界有限元点对点和边对边接触求解裂纹面接触问题的精确性与有效性.     

Mode III fracture analysis by Trefftz boundary element method

This paper presents a hybrid Trefftz (HT) boundary element method (BEM) by using two indirect techniques for mode III fracture problems. Two Trefftz complete functions of Laplace equation for normal elements and a special purpose Trefftz function for crack elements are proposed in deriving the Galerkin and the collocation techniques of HT BEM. Then two auxiliary functions are introduced to improve the accuracy of the displacement field near the crack tips, and stress intensity factor (SIF) is evaluated by local crack elements as well. Furthermore, numerical examples are given, including comparisons of the present results with the analytical solution and the other numerical methods, to demonstrate the efficiency for different boundary conditions and to illustrate the convergence influenced by several parameters. It shows that HT BEM by using the Galerkin and the collocation techniques is effective for mode III fracture problems. The project supported by the National Natural Science Foundation of China(10472082). The English text was polished by Keren Wang.     

无网格与有限元的耦合在动态断裂研究中的应用

提出将无网格Galerkin法与有限元耦合的方法用于分析动态裂纹扩展问题,只在裂尖附近区域沿裂纹扩展方向布置无网格结点,而在其他区域采用一般的有限元,区域交界处的结点采用MLS方法插值,然后将求得的结点值再分配到有限单元的相关结点上,保证了无网格区域和有限元区域的交界处位移的连续。避免了网格的再生成,同时也克服了单纯使用无网格Galerkin法所带来的边界条件难处理及计算效率较低的缺点。数值算例显示这种方法是有效的。     

裂纹面受荷载作用的应力强度因子的计算

基于比例边界有限元法计算了裂纹面有荷载作用情况下裂纹尖端的应力强度因子,给出了有限介质裂纹面作用荷载的比例边界有限元方程的基本求解过程.对于随径向坐标任意变化的一类面荷载的积分能够显式计算,不需要引入额外的近似;并将计算结果与解析解和数值结果进行对比,结果表明比例边界有限元法在计算裂纹面作用荷载时的应力强度因子是有效且精确的.此外,该方法可方便地处理各向异性材料裂纹问题,本文给出了正交各向异性矩形盘裂纹面受均布荷载情况的应力强度因子.     

基于多层模拟方法的双层梁断裂有限元分析

本文提出一种用于含分层的双层梁线弹性断裂分析的有限元方法．将上下子梁均模拟为多个子层，采用只有平动位移自由度的新型梁单元，假设单元内的位移沿纵向和横向均线性变化，推导了该单元的单元刚度矩阵．将开裂部分和未开裂部分的子梁进行单元刚度矩阵组装，施加相应的等效结点力，得到整体平衡方程，并结合边界条件进行求解．为验证该方法的有效性和精度，开展非对称双悬臂梁(Asymmetric Double Cantilever Beam, ADCB)和单臂弯曲梁(Single Leg Bending, SLB)试样的断裂分析，利用虚拟裂纹闭合技术(Virtual Crack Closure Technique, VCCT)得到了试样的能量释放率及其分量，并将求得的结果与解析解和二维有限元解进行对比．计算结果表明，相对于传统双层模拟方法，该多层模拟方法能够精确、高效地计算各类梁试样的能量释放率及其分量，并且无需引入界面连续条件．     

基于图像四叉树的改进型比例边界有限元法研究

为提高数值计算的精度, 断裂力学问题的数值模拟需要在裂纹扩展的局部区域采用较密的网格, 而远离裂纹扩展的区域可采用较疏的网格, 且对于裂纹扩展问题的数值模拟, 大多数数值方法又存在局部网格重剖分的问题. 论文提出了一种基于图像四叉树的改进型比例边界有限元法用于模拟裂纹扩展问题, 该方法可根据结构域几何外边界的图像全自动进行四叉树网格剖分, 无需任何人工干预, 网格剖分效率极高, 由于比例边界有限元法本身的优势, 四叉树网格的悬挂节点可以直接地视为新的节点, 无需任何特殊处理. 通过引入虚节点的思想, 将裂纹与四叉树单元边界交叉点作为虚节点, 虚节点的自由度作为附加自由度处理, 并采用水平集函数表征材料内部的裂纹面, 含不连续裂纹面的子域可通过节点水平集函数识别, 使得裂纹扩展时无需进行网格重剖分, 界面的几何特征通过比例边界有限元子域的附加自由度表征. 最后, 通过若干算例验证了该方法的性能, 建议的改进型比例边界有限元法在求解复合型应力强度因子和模拟材料内部裂纹扩展路径时均具有较高的精度.      

SEMI-ELLIPTIC SURFACE CRACK IN AN ELASTIC SOLID WITH FINITE SIZE UNDER IMPACT LOADING

In this paper a semi-elliptic surface crack problem in an elastic solid of finite size under impact loading is investigated. An analysis is performed by means of fracture dynamics and the finite element method, and a three-dimensional finite element program is developed to compute the dynamic stress intensity factor. The results reveal that the effects of the solid's boundary surface, crack surface, material inertia and stress wave interactions play significant roles in dynamic fracture.     

一种基于直接计算高阶奇异积分的断裂力学双边界积分方程分析法

相对于有限元法,边界单元法在求解断裂问题上有着独特的优势,现有的边界单元法中主要有子区域法和双边界积分方程法.采用一种改进的双边界积分方程法求解二维、三维断裂问题的应力强度因子,对非裂纹边界采用传统的位移边界积分方程,只需对裂纹面中的一面采用面力边界积分方程,并以裂纹间断位移为未知量直接用于计算应力强度因子.采用一种高阶奇异积分的直接法计算面力边界积分方程中的超强奇异积分;对于裂纹尖端单元,提供了三种不同形式的间断位移插值函数,采用两点公式计算应力强度因子.给出了多个具体的算例,与现存的精确解或参考解对比,可得到高精度的计算结果.      

A variational approach for evaluation of stress intensity factors using the element free Galerkin method

A variational meshfree method has been developed to evaluate the stress intensity factors of mixed mode crack problems. The stiffness is evaluated by regular domain integrals and shape functions are determined by both the radial basis function (RBF) interpolation and the moving least-square (MLS) method. The stress intensity factors are obtained by two boundary integrals with variation of crack length. Applications of the proposed technique to two-dimensional fracture mechanics have been presented and comparisons are made with benchmark solutions. Finally, the application of the proposed method to modelling fatigue crack growth is presented.     

2D dynamic analysis of cracks and interface cracks in piezoelectric composites using the SBFEM

The dynamic stress and electric displacement intensity factors of impermeable cracks in homogeneous piezoelectric materials and interface cracks in piezoelectric bimaterials are evaluated by extending the scaled boundary finite element method (SBFEM). In this method, a piezoelectric plate is divided into polygons. Each polygon is treated as a scaled boundary finite element subdomain. Only the boundaries of the subdomains need to be discretized with line elements. The dynamic properties of a subdomain are represented by the high order stiffness and mass matrices obtained from a continued fraction solution, which is able to represent the high frequency response with only 3–4 terms per wavelength. The semi-analytical solutions model singular stress and electric displacement fields in the vicinity of crack tips accurately and efficiently. The dynamic stress and electric displacement intensity factors are evaluated directly from the scaled boundary finite element solutions. No asymptotic solution, local mesh refinement or other special treatments around a crack tip are required. Numerical examples are presented to verify the proposed technique with the analytical solutions and the results from the literature. The present results highlight the accuracy, simplicity and efficiency of the proposed technique.     

PZT-4紧凑拉伸试样的断裂分析

基于线性压电材料的复势理论,通过解析分析,导出了一种分析有限压电板裂纹问题的解析数值方法. 首先,计算了含中心裂纹有限板的断裂参数,与Woo和Wang的解析数值法(Int J Fract, 1993, 62: 203$\sim$218)相比较,表明该方法具有很高的精度和很好的计算效率. 随后,采用该方法和有限元法计算了PZT-4紧凑拉伸试样在绝缘裂纹面边界条件下断裂时的断裂参数,发现各断裂参数的临界值分散性很大,不能作为压电材料的单参数断裂准则. 进而,针对试样真实的裂隙形状,采用有限元法计算了裂隙尖端的应力、电位移场,比较了裂隙内介质的介电性能对裂隙尖端场的影响,计算了带微裂纹的真实裂隙模型的断裂参数并进行了理论分析.      

APPLICATION OF TREFFTZ BEM TO ANTI-PLANE PIEZOELECTRIC PROBLEM

Anti-plane electroelastic problems are studied by the Trefftz boundary elementmethod (BEM) in this paper. The Trefftz BEM is based on a weighted residual formulation andindirect boundary approach. In particular the point-collocation and Galerkin techniques, in whichthe basic unknowns are the retained expansion coefficients in the system of complete equations,are considered, Furthermore, special Trefftz functions and auxiliary functions which satisfy ex-actly the specified boundary conditions along the slit boundaries are also used to derive a specialpurpose element with local defects. The path-independent integral is evaluated at the tip of acrack to determine the energy release rate for a mode Ⅲ fracture problem. In final, the accuracyand efficiency of the Trefftz boundary element method are illustrated by an example and thecomparison is made with other methods.     

波导本征问题分析的比例边界有限元方法

引入了一种求解波导本征值问题的高效而精确算法-比例边界有限元方法SBFEM (Scaled Boundary Finite Element Method).该方法的一个特点是只需在边界上进行离散,问题降低一维,使计算工作量大大减少;另一特点是所建立的控制方程为二阶常微分方程,可以解析地求解,使计算精度得到了保证.论文利用变分原理并通过比例边界坐标变换,推导了TE波和TM波波导的比例边界有限元频域方程以及波导动剐度方程,同时给出了波导动刚度矩阵的连分式解形式,通过引入辅助变量进一步得出波导特征值方程并求出波导本征值.以矩形、L形波导和叶型加载矩形波导的本征问题分析为例,通过与解析解及其他数值方法比较,结果表明,此方法具有精度高、计算工作量小的优点,而且随着连分式阶数增加收敛速度快.进一步分析了一类角切四脊正方形波导的传输特性.     

Numerical simulation of fracture mode transition in ductile plates

Fracture mode of ductile solids can vary depending on the history of stress state the material experienced. For example, ductile plates under remote in-plane loading are often found to rupture in mode I or mixed mode I/III. The distinct crack patterns are observed in many different metals and alloys, but until now the underlying physical principles, though highly debated, remain unresolved. Here we show that the existing theories are not capable of capturing the mixed mode I/III due to a missing ingredient in the constitutive equations. We introduce an azimuthal dependent fracture envelope and illustrate that two competing fracture mechanisms, governed by the pressure and the Lode angle of the stress tensor, respectively, exist ahead of the crack tip. Using the continuum damage plasticity model, we demonstrate that the distinctive features of the two crack propagation modes in ductile plates can be reproduced using three dimensional finite element simulations. The magnitude of the tunneling effect and the apparent crack growth resistance are calculated and agree with experimental observations. The finite element mesh size dependences of the fracture mode and the apparent crack growth resistance are also investigated.     

New type of dual bem and Green's-function-library strategy for fracture analysis in complex structures

A new type of dual boundary integral equations (DBIE) is presented first, through which, a smaller system of equations needs to be solved in fracture analysis. Then a non-conforming crack tip element in two-dimensional problems is proposed. The exact formula for the hypersingular integral over the non-conforming crack tip element is given next. By virtue of Green's-function-library strategy, a series of stress intensity factors (SIF) of different crack orientations, locations and/or sizes in a complicated structure can be obtained easily and efficiently. Finally, several examples of fracture analysis in two dimensions are given to demonstrate the accuracy and efficiency of the method proposed. Partially supported by the Aeronautical Science Foundation of China (No. 99C53026)     

Fracture in metal powder compaction

This paper presents a preliminary assessment and qualitative analysis on fracture criterion and crack growth in metal powder compact during the cold compaction process. Based on the fracture criterion of granular materials in compression, a displacement based finite element model has been developed to analyse fracture initiation and crack growth in metal powder compact. Approximate estimation of fracture toughness variation with relative density is established in order to provide the fracture parameter as compaction proceed. A single crack initiated from the boundary of a multi-level component made of iron powder is considered in this work. The finite element simulation of the crack propagation indicates that shear crack grows during the compaction process and propagates in the direction of higher shear stress and higher relative density. This also implies that the crack grows in the direction where the compaction pressure is much higher, which is in line with the conclusion made by previous researchers on shear crack growth in materials under compression. In agreement with reported work by previous researchers, high stress concentration and high density gradient at the inner corner in multi-level component results in fracture of the component during preparation.     

基于新型裂尖杂交元的压电材料断裂力学研究

提出了一种裂尖邻域杂交元模型，将其与标准杂交应力元结合来求解压电材料裂纹尖 端的奇性电弹场和断裂参数的数值解．裂纹尖端杂交元的建立步骤为：1) 利用高次内插有限元特征法求解特征问题，得到反映裂尖奇异性电弹场状况的特 征值和特征角分布函数；2) 利用广义Hellinger-Reissner变分泛函以及特征问题的解来建立裂尖邻域杂交元模型．该 方法求解电弹场时，摒弃了传统有限元方法中裂尖奇异性场需要借助解析解的做法，也避免 了单纯有限元方法中需要在裂尖端部进行高密度单元划分．采用PZT5板中心裂纹问题 作为考核例，数值结果显示了良好的精确性．作为进一步应用，求解了含中心界面裂纹 的PZT4-PZT5两相压电材料的应力强度因子和电位移强度因子．所有的算例都考虑 了3种裂纹面电边界条件．