用于闪光照相的1MV Rod-Pinch二极管辐射特性

Rod-Pinch二极管(RPD)在小尺度闪光照相方面具有良好的应用前景.根据理论方面的研究结果以及实验室具备的驱动源装置水平,设计了相应结构的RPD,并在1MV工作电压下开展了较为详细的性能实验研究.最终在二极管轴向(0.方向)lm处得到的x光剂量为1.21rad-1.45rad.对于阳极直径为lmm的二极管,其X光焦斑直径仅为0.8mm-1.1mm.X光信号的脉宽为18.1ns-27.5ns.研究表明RPD将是一种用于小尺度闪光照相的理想的X光源.     

4MV/80kA IVA型脉冲X射线照相装置研制进展

介绍了西北核技术研究院研制的4 MV脉冲X射线闪光照相装置("剑光二号")系统组成和实验结果。装置基于感应电压叠加器(IVA)驱动阳极杆箍缩二极管(RPD)技术,主要由前级脉冲功率源、感应电压叠加器和RPD等组成。前级脉冲功率源由两台3.2 MV低电感Marx发生器和四路同轴水介质线组成。每台Marx同时给两路脉冲形成线(特征阻抗6Ω、电气长度30 ns)充电,充电峰值时间约370 ns。每路水介质线采用两级脉冲压缩,为感应腔馈入约1 MV/160 kA/60 ns电脉冲。电触发SF6气体开关、自击穿水开关分别用作主同步开关和脉冲陡化开关。感应电压叠加器采用四级1.5 MV感应腔串联,每级感应腔采用单点馈入结构。次级采用真空绝缘传输线实现电压叠加和功率传输,特征阻抗由30Ω线性增大至120Ω。采用4 MV电压下综合性能较优的RPD来产生强脉冲X射线。装置目前达到技术指标:输出电压4.3 MV、脉冲前沿(10%~90%)21 ns、半高宽约70 ns、二极管电流85 kA,X射线半高宽约55 ns,整机延时(从Marx触发器输出到X射线产生)约749 ns,标准偏差约7 ns。当RPD阳极采用直径2 mm钨针时,正前方1 m处剂量约15.5 rad(LiF),正向焦斑约1.4 mm。     

便携式150kV闪光X光源研制及应用

基于快前沿Mini-Marx发生器拓扑结构和冷阴极反射靶真空X射线二极管一体化设计研发出了紧凑型便携式150kV闪光X光源系统。介绍了设计的Mini-Marx发生器和闪光X光二极管,给出了相应的实验结果。该闪光X光源系统获得了距光源25cm处剂量大于7.7×10-6 C/kg、1m处穿透铝大于60mm、焦斑1~3mm可调的闪光X射线。该闪光X光源和成像单元组成的闪光照相具有系统体积小、运行可靠的特点。     

离子对Rod—pinch二极管工作特性的影响

用于X射线闪光照相的Rod—pinch二极管aRPD）具有电学性能稳定、产额高、焦斑直径小（可达到亚毫米量级）以及结构简单等优点。由于受电场和磁场的影响，二极管中带电粒子的流动方式可以分为空间电荷限制流（SCL）、弱箍缩（WP）和磁绝缘限制流阻）3种基本模式。大量实验和理论研究表明，离子对RPD的工作模式有显著影响，这里结合同轴结构二极管工作模式的半解析描述方法，利用PIC粒子模拟程序，深入研究离子对于RPD工作特性的影响。     

感应电压叠加器驱动阳极杆箍缩二极管型脉冲X射线源

 介绍了自行研制的用于闪光照相且基于感应电压叠加器和阳极杆箍缩二极管的X射线源的组成、结构和主要参数。输出电压3 MV的Marx发生器给阻抗7.8 Ω水介质脉冲形成线充电,产生脉宽约70 ns,电压约1 MV的高功率脉冲,经过峰化开关和预脉冲开关后分成3路馈入三级感应电压叠加器感应腔进行电压叠加,感应电压叠加器次级采用真空绝缘传输线,阻抗从40 Ω变成60 Ω,驱动阳极杆箍缩二极管,二极管阴极为石墨,阳极为直径1.2 mm的钨杆,石墨阴极产生的电子束在电流自磁场作用下发生箍缩,轰击阳极,产生小焦斑脉冲Ｘ射线。该装置在Marx充电电压为±35 kV时,二极管电压约2.0 MV,二极管电流约为50 kA,半高宽约80 ns;X射线半高宽约为40 ns,剂量约为28 mGy,焦斑约为0.95 mm。利用该X射线源拍摄到了炸药爆炸产生的层裂碎片不同飞行时间的图像。     

感应电压叠加器驱动阳极杆箍缩二极管型脉冲X射线源

介绍了自行研制的用于闪光照相且基于感应电压叠加器和阳极杆箍缩二极管的X射线源的组成、结构和主要参数。输出电压3 MV的Marx发生器给阻抗7.8 Ω水介质脉冲形成线充电,产生脉宽约70 ns,电压约1 MV的高功率脉冲,经过峰化开关和预脉冲开关后分成3路馈入三级感应电压叠加器感应腔进行电压叠加,感应电压叠加器次级采用真空绝缘传输线,阻抗从40 Ω变成60 Ω,驱动阳极杆箍缩二极管,二极管阴极为石墨,阳极为直径1.2 mm的钨杆,石墨阴极产生的电子束在电流自磁场作用下发生箍缩,轰击阳极,产生小焦斑脉冲Ｘ射线。该装置在Marx充电电压为±35 kV时,二极管电压约2.0 MV,二极管电流约为50 kA,半高宽约80 ns;X射线半高宽约为40 ns,剂量约为28 mGy,焦斑约为0.95 mm。利用该X射线源拍摄到了炸药爆炸产生的层裂碎片不同飞行时间的图像。     

1 MV阳极杆箍缩二极管数值模型实验研究

阳极杆箍缩二极管（RPD）具有小焦斑、高亮度的特点,是闪光X光机领域的研究热点。基于Marx发生器和脉冲形成线技术路线产生1 MV高电压脉冲驱动RPD,开展了不同结构参数二极管实验研究。基于RPD物理过程的数值模型,分析了结构参数对箍缩物理过程的影响。研究表明在1 MV电压下,RPD阴极等离子体平均扩散速度、阳极等离子体平均扩散速度分别为2,0.6 cm/μs时,该模型可以较好地描述实验结果。在阳极杆直径一定的情况下,二极管数值模型表明减小阴极孔径可以使二极管更快进入强箍缩状态,但过小的阴极孔径会导致二极管间隙过早闭合。     

阳极杆箍缩二极管的理论模型及物理特性

闪光X射线源是获得高凝聚态物质内部物理图像的重要手段,阳极杆箍缩二极管(RPD)作为其重要组成部分之一,直接影响闪光X射线源照相质量。研究RPD物理特性对二极管物理结构优化设计及实验调试具有重要意义。分析了RPD空间电荷限制、弱箍缩和磁绝缘阶段物理模型。基于PIC模拟技术,编写了计算程序,研究了RPD不同阶段的电子电流、离子电流及电子束箍缩物理特性。通过理论分析,获得了特定几何结构RPD物理模型修正系数及各个阶段离子电流与电子电流比,验证了粒子模拟代码的有效性。模拟结果表明:空间电荷限制阶段,粒子模拟结果与双极性流计算结果一致;在弱箍缩和磁绝缘阶段,粒子模拟得到的总电流与磁绝缘模型计算结果一致,且与文献给出的经验拟合表达式计算结果一致;磁绝缘阶段离子电流与电子电流之比与电压和二极管几何结构相关,给出了离子电子电流比增大系数η与电压和阴阳极半径比的关系,该系数受电子、离子在不同结构二极管渡越时间的影响,随电压和阴阳极半径比增加而逼近恒定值。     

40级串联FLTD驱动杆箍缩二极管的箍缩特性模拟

快放电直线型变压器 (FLTD)直接驱动阳极杆箍缩二极管(RPD)技术的紧凑型闪光照相装置是当前研究的热点。采用数值模拟(PIC)方法,建立了40级串联FLTD的粒子模拟模型,研究了不同触发时序下次级分别为正、负极性时的输出特性;在此基础上,初步模拟了RPD在4 MV电压下的箍缩特性。结果为:在脉冲源参数和负载相同的情况下,次级MITL内筒为正极性时的阴极传导电流比例明显低于负极性情况;在脉冲源输出电压4 MV时,RPD电子束箍缩良好,电子束的轴向分布较为集中,38%的电子束沉积在距离针尖1.5 mm的区域。     

200 kV闪光照相测试系统

介绍了一种基于Marx发生器原理设计的200 kV闪光照相测试系统,该系统具有延时功能,可按照实验要求,在预定时刻产生脉冲X射线进行闪光照相测试。设计了一台10级同轴结构的Marx发生器,采用了正负极充电,极间电容耦合为Z形回路的Marx发生器线路,利用开关与屏蔽外筒间的结构电容来锐化高压脉冲的输出,同时采用紧凑性、低电感设计获得窄脉冲的输出。在充电电压为25 kV的情况下,75 的负载上获得了脉宽小于100 ns、幅度大于200 kV的高压脉冲,通过高压电缆驱动闪光X射线二极管, 在距光源25 cm处获得了剂量大于910-6 C/kg、脉冲宽度约为70 ns的闪光X射线。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.