基底复制技术研究

研究了基于Au和Ag两种分离材料,环氧复制和电镀Ni后再环氧复制的基底复制技术.采用直流磁控溅射技术在不同工艺的复制基底上镀制Mo/Si多层膜反射镜,利用反射率计测量其反射率.测量结果表明:电镀Ni后再环氧复制的Au基底反射率最高.     

应用离子束修正高精度CGH基底

计算全息图(CGH)作为零位补偿器广泛应用于高精度非球面的检测中,但CGH的基底误差直接限制了非球面的检测精度。为了获得超高精度的CGH基底,提出了应用离子束修正CGH基底的加工工艺。采用不同束径的离子束去除函数对一边长152 mm(有效口径140 mm圆形区域)、厚6.35 mm的正方形熔石英CGH基底分别进行了精抛、精修和透射波前修正实验。经过总计7轮的迭代修正,最终获得了透射波前为PV值20.779 nm、RMS值0.685 nm的超高精度CGH基底。实验结果表明:应用离子束修正高精度CGH基底的加工工艺具有较大优势,不仅具有较高的加工效率而且可以获得超高的加工精度。     

根据稀疏基底选择抽样模型

在压缩传感技术应用中,根据稀疏基底选择抽样模型对重构结果影响很大。在傅里叶空间中,极坐标星形抽样和随机抽样的重构效果差异巨大,应用傅里叶光学理论对傅里叶空间的频谱分布进行分析,从理论上解释了原因,并且据此提出稀疏基底和抽样模型的匹配情况会影响重构效果。在小波空间中,进行了均匀抽样和随机抽样的对比重构实验,发现后者的重构效果更好,并确定了根据稀疏基底选择合适抽样模型的可行性,为实际应用中降低抽样率,提高重构效果提供了方法依据。     

基于石墨烯基底的光催化特性

金属纳米结构中传导电子的集体振荡所产生的表面等离子体不仅可以使电磁场在时间和空间上重新分布，还可以使被激发的载流子重新分布。采用机械剥离法制备了石墨烯材料，借助拉曼光谱扫描技术（Mapping）研究了石墨的层数在二维区域内的分布情况。研究了2-萘硫醇（2-NT）作为探针分子在石墨烯衬底上的SERS增强特性。结果表明2-NT分子的拉曼信号在石墨烯表面得到增强，且石墨烯的SERS增强效果随着层数的越少而增强。基于石墨烯催化基底，借助表面增强拉曼光谱（SERS）技术具有指纹谱的优势，实时监测以对硝基苯硫酚（4NBT）作为探针分子在局域表面等离子体的驱动下发生光催化反应生成4,4’-二巯基偶氮苯（DMAB）。随后，原位引入硼氢化钠在相同的实验条件下，可以将生成物DMAB在等离子体的驱动下再一次发生逆向化学反应生成对氨基硫酚分子（PATP）。在石墨烯催化基底表面上组装一层分布均匀的探针分子4NBT，用一束一定波长的聚焦激光进行照射使其发生光催化反应生成新的分子DMAB。通过这种手段就可以在微纳尺度上绘制出特定有DMAB分子分布的图形或者字母、汉字信息，实现微纳尺度的图形绘制和信息加密。随后，可以借助Mapping，以DMAB分子的特征峰强度进行二维成像就可以实现所绘制图形的显现和信息解密。此外，可以在加密基底上引入硼氢化钠同时在表面等离子体和激发光的作用下发生逆向光催化反应，从而实现微纳尺度图形和加密信息的擦除。     

基底和膜层-基底系统的赝布儒斯特角计算(英文)

对基底和膜层-基底系统的赝布儒斯特角进行了数值计算.结果显示:当基底的消光系数小于0.01时,基底的赝布儒斯特角主要是由折射率决定;当基底的消光系数大于0.1时,基底的赝布儒斯特角不仅与折射率有关,而且还与消光系数有关,随着消光系数发生后周期性变化.研究表明:单层膜-基底系统的赝布儒斯特角主要由膜层的物理厚度、折射率、基底的光学常量所决定;在HfO2-硅和HfO2-融石英基底系统中,赝布儒斯特角随着入射光波长和膜层厚度的变化呈现准周期性规律变化,可能是由入射光在膜层的干涉效应引起的.     

一种光电阴极导电基底

超快速变象管是诊断各种超快速发光过程的变象管相机的核心部件,而其光电阴极又是该器件的心脏.为了使超快速变象管光电阴极在强的光脉冲作用下能提供大的瞬态电流密度,又能获得高的动态空间分辨率,则要求光电阴极必须具有足够小的横向面电阻率.但是,常用的s型半导体光电阴极其横向面电阻率一般均大于10~6Ω/□。为了解决这一问题,超快速变象管的光电阴极通常制作在透明的导电基底上. 超快速变象管光电阴极所用的导电基底应满足如下要求:(1)和光电阴极相容,即它的存在不影响光电阴极的制作及其灵敏度的提高,在光电阴极制作之后其面电阻率不…     

玻璃基底上平衡态液滴接触角特性

为了了解玻璃基底上平衡态液滴接触角特性,采用实验和理论相结合的方法分析了玻璃基底表面水滴平衡时应满足的热力学条件,得到了液滴汽-液界面形状以及平衡态接触角大小。分析发现,玻璃基底上平衡态液滴接触角是与三相接触线压力相关的热力学参数,当三相接触线曲率一定时,平衡态液滴接触角随三相接触线处压比的增加而增大.同时,考虑到固-液界面吸附特性,根据平衡态时系统亥姆霍兹自由能最小这一热力学判据可以预测出液滴平衡接触角大小,结果和实验值吻合。     

光纤基底TiNi形状记忆合金薄膜制备工艺

将TiNi基记忆合金薄膜与光纤相结合可制成智能化、集成化且成本经济的微机电系统和微传感器件.本文采用磁控溅射法在二氧化硅光纤基底上制备TiNi记忆合金薄膜,系统讨论了溅射工艺参数以及后续退火处理对薄膜质量的影响.采用自研制光纤镀膜掩膜装置在直径为125μm的光纤圆周表面上形成均匀薄膜.实验表明:在靶基距、背底真空度、Ar气流量和溅射时间一定的条件下,溅射功率存在最佳值;溅射压强较大时,薄膜沉积速率较低,但薄膜表面粗糙度较小.进行退火处理后,薄膜形成较良好的晶体结构,Ti_49.09Ni_50.91薄膜中马氏体B19′相和奥氏体B2相共存,但以B19′为主.根据本文研究结果,在玻璃光纤基底上制备高质量的TiNi基记忆合金薄膜是可实现的,本工作为下一步研制微机电系统和微型传感器做了基础准备.     

硅基底石墨烯器件的现状及发展趋势

石墨烯是一种由单层碳原子紧密排列而形成的具有蜂窝状结构的二维晶体材料,特殊的结构赋予了其优异的性能,如高载流子迁移率、电导率、热导率、力学强度以及量子反常霍尔效应.由于石墨烯优异的特性,迅速激起了人们对石墨烯研究以及应用的热情.石墨烯沉积或转移到硅片后,其器件构建与集成和传统硅基半导体工艺兼容.基于石墨烯的硅基器件与硅基器件的有机结合,可以大幅度提高半导体器件的综合性能.随着石墨烯制备工艺和转移技术的优化,硅基底石墨烯器件将呈现出潜在的、巨大的实际应用价值.随着器件尺寸的纳米化,器件的发热、能耗等问题成为硅基器件与集成发展面临的瓶颈问题,石墨烯的出现为解决这些问题提供了一种可能的解决方案.本文综述了石墨烯作为场效应晶体管研究的进展,为解决石墨烯带隙为零、影响器件开关比的问题,采用了量子限域法、化学掺杂法、外加电场调节法和引入应力法.在光电器件研究方面,石墨烯可以均匀吸收所有频率的光,其光电性能也受到了广泛的关注,如光电探测器、光电调制器、太阳能电池等.同时,石墨烯作为典型的二维材料,其优越的电学性能以及超高的比表面积,使其作为高灵敏度传感器的研究成为纳米科学研究的前沿和热点领域.     

基于聚酰亚胺基底的太赫兹滤波器

超材料是通过人工方式做成的具有特殊电磁特性的亚波长周期性金属结构,通过合理的设计样品结构,可以实现自然界中传统材料无法实现的电磁现象。超材料可以广泛用于电磁隐身、完美吸收、负折射率等研究领域,近些年,随着太赫兹技术的发展,太赫兹超材料器件被广泛研究。由于硅（Si）对于太赫兹波的透过率较高,通常选取Si作为基底材料。但Si硬度较高、不易弯曲且易碎等缺点限制了THz超材料的应用。聚合物材料聚酰亚胺具有柔性,作为基底,克服了传统硅基底的缺点,透过率可以与Si匹敌,而且其表面光滑,适合传统光刻技术加工。对聚酰亚胺在太赫兹波段光学性质的测试结果表明,此种材料的折射率在1.9左右,透过率达到80%以上。设计了一种双开口谐振环结构,研究了其太赫兹波透射性质以及随太赫兹波的入射角度和样品曲率的变化规律,发现透射峰强度和峰位均不发生改变。此结果展示了将平面滤波延伸到曲面滤波领域的可能性,若将聚酰亚胺基底做薄,为今后太赫兹频段隐身衣的研究提供基础。将不同结构的两种样品叠加在一起制成宽谱滤波器, 50%的带宽达到181 GHz。此种宽带滤波器制作简单,滤波效果显著,为太赫兹波段宽带滤波器的制作提供一种新思路。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.