Effects of Cu doping on nickel oxide thin film prepared by sol–gel solution process

We prepared nickel oxide (NiO) thin films with p-type Cu dopants (5 at%) using a sol–gel solution process and investigated their structural, optical, and electrical characteristics by X-ray diffraction (XRD), atomic force microscopy (AFM), optical transmittance and current–voltage (I–V) characteristics. The crystallinity of the NiO films improved with the addition of Cu dopants, and the grain size increased from 38 nm (non-doped) to 50 nm (Cu-doped). The transmission of the Cu-doped NiO film decreased slightly in the visible wavelength region, and the absorption edge of the film red-shifted with the addition of the Cu dopant. Therefore, the width of the optical band gap of the Cu-doped NiO film decreased as compared to that of the non-doped NiO film. The resistivity of the Cu-doped NiO film was 23 Ω m, which was significantly less than that of the non-doped NiO film (320 Ω m). Thus, the case of Cu dopants on NiO films could be a plausible method for controlling the properties of the films.     

Nanoporous nickel oxide thin films and its improved electrochromic performance: Effect of thickness

Electrochromic properties of chemically bath deposited nanoporous NiO thin films were investigated as a function of film thickness using Ni sulphate precursor, aqueous ammonia and potassium persulphate as complexing and oxidizing agents respectively. The films were characterized for their structural, morphological, optical and electrochromic properties using X-ray diffraction, scanning electron microscopy, FT-IR spectroscopy, cyclic voltammetry, chronoamperometry and optical transmittance studies. X-ray diffraction patterns show that the films are polycrystalline, consisting of NiO cubic phase. Infrared spectroscopy results show the presence of free hydroxyl ion and water in NiO thin films. SEM micrographs revealed nanoporous nature composed of interconnected nanoporous network, forming well defined 3D nano envelopes. The optical band gap energy was found to be decreased from 3.22 to 2.80 eV with increasing film thickness. The electrochromic properties of all the films were investigated in aqueous (KOH) and non aqueous (LiClO₄-PC) electrolyte by means of cyclic voltammetry (CV), chronocoulometry (CC) and optical studies. The transmittance modulations or optical density differences during the coloring/bleaching process were found to be increased with the film thickness. This increment in optical differences led to an increase in coloration efficiency (CE) to about 95 cm²/C, which is two times more than that observed in KOH and response time of 2.9 s for bleaching (reduction) and 3.5 s for coloration (oxidation) observed for the film deposited at 60 min with excellent electrochemical stability up to 3000 c/b cycles in LiClO₄-PC electrolyte.     

Properties of NiO thin films deposited by chemical spray pyrolysis using different precursor solutions

NiO thin films have been deposited by chemical spray pyrolysis using a perfume atomizer to grow the aerosol. The influence of the precursor, nickel chloride hexahydrate (NiCl₂·6H₂O), nickel nitrate hexahydrate (Ni(NO₃)₂·6H₂O), nickel hydroxide hexahydrate (Ni(OH)₂·6H₂O), nickel sulfate tetrahydrate (NiSO₄·4H₂O), on the thin films properties has been studied. In the experimental conditions used (substrate temperature 350 °C, precursor concentration 0.2-0.3 M, etc.), pure NiO thin films crystallized in the cubic phase can be achieved only with NiCl₂ and Ni(NO₃)₂ precursors. These films have been post-annealed at 425 °C for 3 h either in room atmosphere or under vacuum. If all the films are p-type, it is shown that the NiO films conductivity and optical transmittance depend on annealing process. The properties of the NiO thin films annealed under room atmosphere are not significantly modified, which is attributed to the fact that the temperature and the environment of this annealing is not very different from the experimental conditions during spray deposition. The annealing under vacuum is more efficient. This annealing being proceeded in a vacuum no better than 10⁻² Pa, it is supposed that the modifications of the NiO thin film properties, mainly the conductivity and optical transmission, are related to some interaction between residual oxygen and the films.     

Optimization of the optical and electrical properties of electron beam evaporated aluminum-doped zinc oxide films for opto-electronic applications

Aluminum-doped zinc oxide (AZO) thin films have been deposited by electron beam evaporation technique on glass substrates. The structural, electrical and optical properties of AZO films have been investigated as a function of annealing temperature. It was observed that the optical properties such as transmittance, reflectance, optical band gap and refractive index of AZO films were strongly affected by annealing temperature. The transmittance values of 84% in the visible region and 97% in the NIR region were obtained for AZO film annealed at 475 °C. The room temperature electrical resistivity of 4.6×10⁻³ Ω cm has been obtained at the same temperature of annealing. It was found that the calculated refractive index has been affected by the packing density of the thin films, whereas, the high annealing temperature gave rise to improve the homogeneity of the films. The single-oscillator model was used to analyze the optical parameters such as the oscillator and dispersion energies.     

Effect of annealing temperature on the optical constants of zinc oxide films

In this paper, the effect of annealing temperature on optical constants was studied. The ZnO films were deposited on microscopic glass substrates using the sol-gel method for various annealing temperatures. The deposited zinc oxide (ZnO) films were characterized by an X-ray diffractometer (XRD), a spectrophotometer and scanning electron microscopy (SEM). The transmittance spectra recorded through the spectrophotometer exhibits 90% transmittance. The XRD spectra showed polycrystalline nature of ZnO film. Optical constants were determined through transmittance spectra using an envelope method. It was found that there was a significant effect of annealing temperature on the refractive index and extinction coefficient of deposited ZnO films. In this experiment, the optimum refractive index value of 1.97 was obtained at 350 °C annealing temperature at visible (vis) wavelength. The optical energy gap was found to be of ∼3.2 eV for all the samples. The top view of SEM showed the ZnO grain growth on the glass substrates.     

在不同衬底上制备的ZnO薄膜透射率的研究

采用反应磁控溅射在不同结构衬底上生长ZnO薄膜,通过X-ray衍射(XRD)及透射光谱来分析薄膜的成膜情况,并得出在Al₂O₃/AlN复合基上溅射沉积的ZnO薄膜比单独在AlN薄膜衬底的结晶质量好且透过率也较高。而经不同的快速热退火温度验证,发现在400 ℃时,ZnO薄膜的结晶化及在(002)方向上的择优取向达到最好,并在可见光范围内的平均透过率达到88%以上。当退火温度超过450 ℃时,温度过高改变了ZnO薄膜的内部结构,使其氧原子和锌原子发生了较大距离的位移,导致薄膜内部缺陷的增多,从而存在过多的晶界,增加了其薄膜的散射机制,使光的透过性变差,退火温度为500 ℃时,薄膜的平均透过率为80%。     

Determination and analysis of the dispersive optical constants of the 5,5′,6,6′-tetraphenyl-2,2′-bi([1,3]dithiolo[4,5-b][1,4]dithiinylidene)–DDQ complex thin film

The synthesis and optical properties of the 5,5′,6,6′-tetraphenyl-2,2′-bi([1,3]dithiolo [4,5-b] [1,4]dithiinylidene)–2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ) complex thin film were investigated by the optical characterization. The optical constants such as refractive index, extinction coefficient and absorption coefficient were determined using the transmittance T(λ) and reflectance R(λ) spectra and the refractive index dispersion was analyzed using single oscillator of Wemple–Didomenico model. The single oscillator energy E₀ and the dispersion energy E_d were calculated. The effect of temperature on refractive dispersion and optical band gap E_g is also discussed. As a result, the annealing temperatures have an important effect on refractive index of thin film.     

Thermally stable AgCu alloy disc array for near infrared filters

We investigated the thermal and optical characteristics of AgCu alloy disc (250 and 380 nm in diameter) arrays to produce an optical filter with low near infrared (NIR) transmittance, and compared their properties with those of Ag disc array. Unlike the Ag discs, the AgCu discs remained relatively stable with hillocks after annealing at 500 °C. The Ag and AgCu disc samples had similar transmittance characteristics, showing a global minimum at ~767 nm (for the 250 nm-disc samples) and at ~1081 nm (for the 380 nm-disc samples). Based on finite-difference time-domain (FDTD) simulations, the global minimum was related to localised surface plasmon resonance (LSPR). The Maxwell-Garnett model was employed to interpret the red-shift of the transmittance minima. The calculations showed that a mixture of agglomerated and stable Ag discs, resulting in different n and k values, would be responsible for the red-shift and an increase in the minimum transmittance.     

Annealing induced refinement on optical transmission and electrical resistivity of indium tin oxide

The effect of annealing condition on sputtered indium tin oxide （ITO） films on quartz with the thickness of 200 nm is characterized to show enhanced optical transparency and optimized electrical contact resistivity. The as-deposited grown ITO film exhibits only 65% and 80% transmittance at 532 and 632.8 nm, respectively. After annealing at 475 ℃ for 15 min, the ITO film is refined to show improved transmittance at shorter wavelength region. The transmittances of 88.1% at 532 nm and 90.4% at 632.8 nm can be obtained. The 325-nm transmittance of the post-annealed ITO film is greatly increased from 12.7% to 41.9%. Optimized electrical property can be obtained when annealing below 450 ℃, leading to a minimum sheet resistance of 26 Ω/square. Such an ITO film with enhanced ultraviolet （UV） transmittance has become an alternative candidate for applications in current UV photonic devices. The morphology and conductance of the as-deposited and annealed ITO films are determined by using an atomic force microscopy （AFM）, showing a great change on the uniformity distribution with finite improvement on the surface conductance of the ITO film after annealing.     

Highly porous nickel oxide thin films prepared by a hydrothermal synthesis method for electrochromic application

We report NiO nanowall thin films prepared by a facile hydrothermal synthesis method and their electrochromic application. The as-prepared porous nanowall NiO thin films show a highly porous structure built up by many interconnected nanoflakes with a thickness of about 30 nm. The electrochromic performances of the NiO films are characterized by means of UV–vis spectroscopy and cyclic voltammetry (CV) measurements. The effect of the annealing temperature on electrochromic properties is discussed. The NiO nanowall film annealed at 300 °C exhibits much better electrochromic performance than those counterparts annealed at higher temperature. The film annealed at 300 °C exhibits a noticeable electrochromism with reversible color changes from transparent to brown dark and presents a transmittance variation with 77% at 550 nm. The NiO nanowall film also shows good reaction kinetics with fast switching speed, and the coloration and bleaching times are 3 s and 4 s, respectively. The improved electrochromic performances are due to the porous morphological characteristics with fast ion and electron transfer resulting in fast reaction kinetics and high color contrast.     

Thin films of molecular materials synthesized from C32H20N10M (M = Co, Pb, Fe): Film formation, electrical and optical properties

In this work, the synthesis of molecular materials formed from metallic phthalocyanines and 1,4-phenylenediamine is reported. The powder and thin film (∼80-115 nm thickness) samples of the synthesized materials, deposited by vacuum thermal evaporation, show the same intra-molecular bonds in the IR spectroscopy studies, which suggests that the thermal evaporation process does not alter these bonds. The morphology of the deposited films was studied using scanning electron microscopy (SEM) and atomic force microscopy (AFM) and their optical and electrical properties were studied as well. The optical parameters have been investigated using spectrophotometric measurements of transmittance in the wavelength range 200-1200 nm. The absorption spectra recorded in the UV-vis region for the deposited samples showed two bands, namely the Q and Soret bands. The optical activation energy was calculated and found to be 3.41 eV for the material with cobalt, 3.34 eV for the material including lead and 3.5 eV for the material with iron. The effect of temperature on conductivity was measured for the thin films and the corresponding conduction processes are discussed in this work.     

Optical properties of hexagonal boron nitride thin films deposited by radio frequency bias magnetron sputtering

The optical properties of hexagonal boron nitride (h-BN) thin films were studied in this paper. The films were characterized by Fourier transform infrared spectroscopy, UV--visible transmittance and reflection spectra. h-BN thin films with a wide optical band gap E_g (5.86 eV for the as-deposited film and 5.97 eV for the annealed film) approaching h-BN single crystal were successfully prepared by radio frequency (RF) bias magnetron sputtering and post-deposition annealing at 970~K. The optical absorption behaviour of h-BN films accords with the typical optical absorption characteristics of amorphous materials when fitting is made by the Urbach tail model. The annealed film shows satisfactory structure stability. However, high temperature still has a significant effect on the optical absorption properties, refractive index n, and optical conductivity σ of h-BN thin films. The blue-shift of the optical absorption edge and the increase of E_g probably result from stress relaxation in the film under high temperatures. In addition, it is found that the refractive index clearly exhibits different trends in the visible and ultraviolet regions. Previous calculational results of optical conductivity of h-BN films are confirmed in our experimental results.     

Non-vacuum, single-step conductive transparent ZnO patterning by ultra-short pulsed laser annealing of solution-deposited nanoparticles

A solution-processable, high-concentration transparent ZnO nanoparticle (NP) solution was successfully synthesized in a new process. A highly transparent ZnO thin film was fabricated by spin coating without vacuum deposition. Subsequent ultra-short-pulsed laser annealing at room temperature was performed to change the film properties without using a blanket high temperature heating process. Although the as-deposited NP thin film was not electrically conductive, laser annealing imparted a large conductivity increase and furthermore enabled selective annealing to write conductive patterns directly on the NP thin film without a photolithographic process. Conductivity enhancement could be obtained by altering the laser annealing parameters. Parametric studies including the sheet resistance and optical transmittance of the annealed ZnO NP thin film were conducted for various laser powers, scanning speeds and background gas conditions. The lowest resistivity from laser-annealed ZnO thin film was about 4.75×10⁻² Ω cm, exhibiting a factor of 10⁵ higher conductivity than the previously reported furnace-annealed ZnO NP film and is even comparable to that of vacuum-deposited, impurity-doped ZnO films within a factor of 10. The process developed in this work was applied to the fabrication of a thin film transistor (TFT) device that showed enhanced performance compared with furnace-annealed devices. A ZnO TFT performance test revealed that by just changing the laser parameters, the solution-deposited ZnO thin film can also perform as a semiconductor, demonstrating that laser annealing offers tunability of ZnO thin film properties for both transparent conductors and semiconductors.     

自适应模拟退火遗传算法在薄膜厚度及光学常数反演中的应用

准确的测量薄膜的厚度和光学常数,在薄膜的制备、研究和应用中都是十分重要的。借助Cauchy色散模型,通过薄膜透过率测量曲线,用改进的自适应模拟退火遗传算法对透过率曲线进行全光谱拟合,从而反演得到薄膜的厚度和光学常数。对由电子束蒸发制备的TiO2单层膜和SiO2/TiO2双层膜的厚度和光学常数进行了测量计算。实验结果表明,计算得到的光学参数与实测结果相一致,厚度误差小于2nm,在560nm波长处折射率误差小于0.03。     

Temperature dependences of optical properties,chemical composition,structure,and laser damage in Ta2O5 films

Ta2O5 films are prepared by e-beam evaporation with varied deposition temperatures,annealing temperatures,and annealing times.The effects of temperature on the optical properties,chemical composition,structure,and laserinduced damage threshold(LIDT) are systematically investigated.The results show that the increase of deposition temperature decreases the film transmittance slightly,yet annealing below 923 K is beneficial for the transmittance.The XRD analysis reveals that the film is in the amorphous phase when annealed below 873 K and in thehexagonal phase when annealed at 1073 K.While an interesting near-crystalline phase is found when annealed at 923 K.The LIDT increases with the deposition temperature increasing,whereas it increases firstly and then decreases as the annealing temperature increases.In addition,the increase of the annealing time from 4 h to 12 h is favourable to improving the LIDT,which is mainly due to the improvement of the O/Ta ratio.The highest LIDT film is obtained when annealed at 923 K,owing to the lowest density of defect.     

Application of nickel oxide nanoparticles in electrochromic materials

This study presents the application of NiO nanoparticles in electrochromic materials field. The monodisperse NiO nanoparticles ranged from 5 to 8 nm were synthesized by hot-injection method and the NiO films were prepared by dip-coating technique on ITO glass. The structure, electrochemical as well as optical performance was investigated systematically. NiO films composing of nanoparticles maintained the porous microstructure and exhibited excellent electrochromic performance. It was clear that the film annealed at 300 °C exhibited the highest electrochemical activity and improved transmittance modulation (?T), while maintaining faster response time.     

基于金属掺杂ITO透明导电层的紫外LED制备

为降低ITO薄膜对紫外波段的光吸收,制备低电压高功率的紫外LED,研究了一种基于金属掺杂ITO透明导电层的365 nm紫外LED的制备工艺。利用1 cm厚的石英片生长了不同厚度ITO薄膜以及在ITO上掺杂不同金属的新型薄膜,并研究了在不同的退火条件下这种薄膜的电阻和透过率,分析了掺杂金属ITO薄膜的带隙变化。将这种掺杂的ITO薄膜生长在365 nm外延片上并完成电极生长,制备成14 mil×28 mil的正装LED芯片。利用电致发光（EL）设备对LED光电性能进行测试并对比。实验结果表明:掺Al金属的ITO薄膜能够相对ITO薄膜的带隙提高0.15 eV。在600℃退火后,方块电阻降低6.2 Ω/□,透过率在356 nm处达到90.8%。在120 mA注入电流下,365 nm LED的电压降低0.3 V,功率提高14.7%。ITO薄膜掺金属能够影响薄膜带隙,改变紫光LED光电性能。     

Optical properties of nanostructured InSe thin films

Thin films of InSe were prepared by thermal evaporation technique. The as-deposited films have nano-scale crystalline nature and the annealing enhanced the degree of crystallinity. The optical properties of nanocrystalline thin films of InSe were studied using spectrophotometric measurements of transmittance, T, and reflectance, R, at normal incidence of light in the wavelength range 200–2500 nm. The optical constants (refractive index, n, and absorption index, k) were calculated using a computer program based on Murmann's exact equations. The calculated optical constants are independent of the film thickness. The optical dispersion parameters have been analysed by single oscillator model. The type of transition in InSe films is indirect allowed with a value of energy gap equals to 1.10 eV, which increased to 1.23 eV upon annealing.     

掺杂透明导电半导体薄膜的光电性能研究

掺杂氧化锌透明导电膜(AZO)是一种重要的光电子信息材料，其制备方法有真空蒸镀法、磁控溅射法，化学气相沉积和脉冲激光沉积法等。该文采用溶胶 凝胶（sol gel)工艺在普通玻璃基片上成功地制备出Al3+掺杂型ZnO透明导电薄膜。将这种薄膜在空气和真空中以不同的温度进行了退火处理，并对薄膜进行了XRD分析和光电性能研究。结果表明，所制备的薄膜为钎锌矿型结构，在c轴方向择优生长，真空退火有利于薄膜结晶状况的改善，并使薄膜的载流子浓度大幅度地增加而电阻率下降，并且真空退火对薄膜的透射率影响不大。     

Morphological and optical properties of sol-gel derived 6SrO·6BaO·7Al2O3 thin films

A novel 6SrO·6BaO·7Al₂O₃ (S6B6A7) thin film deposited onto soda lime float glass via sol-gel dip coating technique is reported. The morphological and compositional properties of the S6B6A7 thin films have been investigated using scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) revealing that the films were composed of S6B6A7 nanoparticles. The optical properties of the S6B6A7 films are affected by sol concentration, film thickness and annealing temperature as revealed by UV-vis transmittance. The transparency of S6B6A7 films improved on increasing annealing temperature up to 450 °C in air. The S6B6A7 films prepared using 2, 5, and 8 (wt.%) sols and annealed at 450 °C exhibit an average transmittance of over ∼91% in wide visible range.