超软X射线流气式正比计数管

介绍了一种用于测量183～933eV超软X射线的圆柱形、侧窗式、流气式正比计数管,工作气体是0.11MPa的P-10气体或氦气-丙烷混合气体。计数管内径为φ25mm,直径为φ0.3mm的入射窗是由厚度80～90μgcm~2聚乙烯甲醛制成的。该计数管的特点:(1)薄窗,对软X射线透过率高。(2)流气式,工作寿命长。(3)能量分辨率好。(4)计数率高(1×10~(14)个/s)。(5)可测能区宽(0.183～10keV)。(6)可以方便更换窗膜材料、厚度及窗口直径。近几年来该计数管已经为高强度低能X光源提供较好监测。     

MC模拟分析透射式微型X射线管目标靶厚度对输出谱的影响

透射式微型X射线管是能量色散X射线荧光分析中的主要激发源,在能量色散X射线荧光分析中希望得到谱分布较为单一的X射线管输出谱。采用MC方法,研究了透射式微型X射线管在不同目标靶厚度的情况下输出谱的特征,通过低谱段(<5 keV)和高能谱段(5~50 keV)的分析比较,高能谱段计数随厚度加大先增加而后减小,低能谱段计数则随厚度增加减小,增加目标靶厚度可以有效抑制低能谱段。在入射电子能量为50 keV和目标靶为4 Ag的条件下,X射线管输出能谱具有较高的高能谱段注量,同时有效压制低能谱段注量,适合能量色散X射线荧光分析中使用。     

氢分子离子与氮分子碰撞过程的实验研究

本文讨论了用离子存储技术研究低能(eV量级)氢分子离子与氮分子碰撞的过程.得到质子交换率常数K_(pt)=5.23×10~(-9)cm~3/sec和电荷交换率常数k_(ct)=0.45×10~(-9)cm~3/sec     

X射线绝对测量

在5—25keV单能刻度用X射线发生器上,用充氩密封式正比计数管直接测量了X射线量子效率为0.877±0.011—0.107±0.002,推算出X射线发生器绝对产额为(1.40±0.03)×10~(10)—(9.20±0.39)×10~8/s。     

低能离子注入形成氮化硅薄膜特性的研究

低能离子束与表面相互作用主要呈现溅射、注入等现象。本文研究了在1.35keVN₂⁺离子注入形成氮化硅的特性,并研究了注入和溅射的并存过程。在高剂量、低能(<10keV)注入的情况下,提出了有效剂量的概念,并建立了刻蚀速率、射程与有效注入剂量的关系。还用俄歇电子能谱(AES)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、背散射分析(RBS)测定了薄膜的有关特性。 关键词：     

土壤重金属铅元素的X射线荧光光谱测量分析

在实验室条件下,利用NITON XLt793型便携式X射线荧光光谱重金属分析仪测量并分析土壤中铅元素的X射线荧光光谱特性。分别以铅的L_α(10.55 keV)和L_β(12.61 keV)特征谱线作为分析线,分析了不同基体元素对分析线的影响;测定在不同铅浓度下的特征谱线强度变化。结果表明铅的质量分数在10×10-6～1 800×10-6范围内,元素的光谱强度与浓度之间呈现较好的线性关系;建立了铅元素的定标曲线,并计算得到铅的检出限为7.89×10-6。     

射线探测用碲锌镉晶体及其器件研究

采用改进的布里奇曼(B ridgm an)方法进行锌组分为0.15碲锌镉(Cd0.85Zn0.15Te)晶体的生长。通过严格控制晶体生长过程中Cd的蒸气分压,使得所生长的碲锌镉晶体在结晶质量方面达到了较好的水平。对其性能进行测试,红外透射比T>60%、沉积相密度<1×104/cm2、位错腐蚀坑密度DEPD<6×104/cm2、X射线衍射双晶回摆曲线半峰全宽FWHM<20 arcsec、电阻率ρ>1010Ω.cm。利用所生长的晶体初步制作了平面型单元碲锌镉射线探测器,所用晶体的尺寸为5 mm×5 mm×2.5 mm,制成的探测器在室温下对125I和241Am放射源进行了探测测量。对125I放射源,探测出了强度为74.5%的27.5 keV的γ射线特征峰,不能仔细分辨出强度为39.8%的27.2 keV的γ射线特征结构;对241Am放射源,探测出了59.5 keV的γ射线特征峰,分辨率优于6 keV,半峰全宽FWHM<10%,同时还能检测出Te、Cd的X射线逃逸的混合峰以及241Am低能Te-K系、Np-L系的两个X射线特征峰。     

微通道板2.0～5.5 keV X射线透过率标定

 在北京同步辐射3B3中能X射线束线2.0~5.5 keV能段对微通道板(MCP)透过率进行了测量标定。实验表明,MCP在2.0 keV的低能段处和5.5 keV的高能段处的透过率较高,而中段较低。对MCP透射和X光在MCP毛细导管列阵中的全反射两种机制进行了物理建模,分别计算验证。结果发现:X光在毛细导管内掠入射会产生全反射,且能段越低反射率越高;MCP透过率特性正是MCP特殊的结构和材料造成的,为透射和反射两种机制共同贡献的结果,低能端主要来自X光在毛细导管中的全反射贡献,高能端主要来自透射贡献。     

100keV质子与低高能质子在绝缘微孔中输运特性的对比分析

为研究中能区带电粒子在绝缘微孔中传输的物理图像,利用MATLAB程序和蒙特卡罗方法建立理论模型,得到入射能量为10 keV,100 keV和1 MeV的质子,以-1?倾斜角入射到微孔后,出射粒子角分布、沉积电荷斑分布,以及粒子在微孔内的运动轨迹等传输特性.研究结果表明,在10 keV的低能区,微孔内壁沉积电荷的导向效应是主要的传输机制.在1 MeV的高能区,进入表面以下多次随机非弹性碰撞是主要的输运机制.在100 keV的中能区,无电荷斑时,主要是以进入表面以下的随机二体碰撞为传输机制;在电荷斑累积过程中,增强的库仑排斥力逐渐抑制入射质子在微孔内壁表面发生电子俘获;当达到充放电平衡后,主要传输机制为电荷斑辅助的近表面镜面散射行为.这一特性加深了对中能区质子在微孔中输运行为的认识,有助于对百keV质子微束的控制和应用.     

邻苯二钾酸氢铊晶体积分衍射效率的标定

 以北京同步辐射实验室4B7中能束线为光源，在2.1~6.0 keV的范围内对邻苯二钾酸氢铊(TlAP)平面晶体一、二 、三级衍射的积分衍射效率进行了精确的实验标定。标定结果表明：TlAP晶体有较高的峰值衍射率； 其一级衍射的积分衍射效率向低能端有增加的趋势，而在2.6~5.4 keV的范围内大约为1.53×10^-4 rad；随着衍射级次的提高，衍射效率逐渐减小，二级衍射的积分衍射效率约为一级衍射效率的1/4，三级衍射结果比一级衍射下降一个量级。实验所标定的TlAP晶体可用于平晶谱仪对激光等离子体X射线光谱的定量分析。     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.