基于预应力的超低温漂光纤光栅封装技术实验研究

提出了一种基于预应力的超低温漂光纤光栅封装方法并进行了实验测试,通过分析光纤光栅的应力和温度交叉作用的原理,结合硬铝材料和石英管材料不同的膨胀系数,在光纤光栅上施加预应力的结构来解决光纤光栅温度补偿问题;通过设计和制作含预应力的封装结构产生负温度效应的方法,使封装的光纤光栅实现光纤光栅中心波长超低温度漂移。实验结果表明:在温度为20～80℃的测试范围内,这种封装结构可实现光纤光栅0.0002nm/℃的超低温度漂移,而且具有良好的稳定性和一致性。     

基于信号自相关原理的光纤光栅数字解调方法

为满足工程测试领域对光纤光栅波长漂移高分辨探测技术的需要,提出一种基于信号自相关原理的新型光纤光栅数字解调技术.该技术在可调谐滤波法的基础上,通过对信号序列采用自相关分析以实现对波长漂移的测量以及对传感光栅反射谱形状的识别,能够有效克服噪音对信号的影响.仿真结果表明：光纤光栅自相关数字解调方法可以准确测量光纤光栅波长的漂移,适用于传感光栅具有相同波长的变化范围.     

具有有源闭合腔的光纤光栅传感系统地址查询技术

基于熔融拉锥技术研制的3 dB宽带耦合器的光纤环形镜的工作原理,提出了一种新型的具有有源闭合腔装置的光纤光栅传感系统。在用作闭合共振腔端镜的环形镜中写入十个波分复用光纤光栅传感元,利用共振腔中接入的法布里-珀罗滤波器,通过控制电压对传感光栅的波长扫描,实现对传感地址的查询。用非平衡的迈克耳孙扫描干涉仪将传感光栅的波长漂移信息变为相移信息,实现传感信号的解调。系统传感灵敏度的实验值为1.5835°/10-6ε,与理论值(1.6662°/10-6ε)基本吻合。     

基于色散补偿光纤的高速光纤光栅解调方法

本文提出并论证了一种光纤光栅高速解调的新方法, 利用色散补偿光纤的色散效应, 将光纤光栅的波长漂移信息转换成时域信息. 采用脉冲激光器作为光源, 仅需一个光脉冲可获取单根光纤上所有光纤光栅的反射光脉冲, 再根据各个光栅反射回光脉冲的延时变化即可实现波长的解调. 本方法可用于准分布光纤光栅传感网络解调, 系统采用全光纤结构, 无需波长扫描, 大大提高了解调速度. 本文搭建了测试系统进行实验验证, 对3个光纤光栅组成的准分布式传感网络进行了解调, 实验结果表明, 解调出的光纤光栅布喇格波长线性度好, 解调速度最高可达1 MHz, 采样数据取10次平均后解调线性度可达0.9969, 解调误差约为27.8 pm.     

光纤光栅式飞机驾驶杆杆力传感器研究

提出了一种基于光纤布喇格光栅的飞机驾驶杆力传感器.理论上讨论了飞机驾驶杆弹性元件力学特性和光纤布喇格光栅的应变传感特性,分析了飞机驾驶杆力传感器的灵敏特性.实验上通过测量不同外加载荷力作用下光纤光栅中心波长变化,研究了光纤光栅式飞机驾驶杆力传感器的传感响应特性.实验结果表明:光纤光栅中心波长漂移量和外加载荷力成线性关系,与理论分析吻合;传感器的横向与纵向灵敏度可以分别达到2.07pm.N-1和1.80pm.N-1,与数值模拟结果基本一致.     

基于光纤光栅的高灵敏度流速传感器

利用光纤光栅压强传感机构和汾丘里管设计了一种基于光纤光栅的流速传感器,并推导了光纤光栅中心波长漂移量与流速的关系式。实验表明,该传感器具有较高的灵敏度,稳定性较好,光纤光栅的中心波长随流速的增加而不断向短波方向漂移,而带宽几乎没有变化,实验和理论符合得较好。该流速传感器的动态感测范围为51.0~148.2 mm/s,在该范围内,至少可感测到0.3 mm/s的流速变化,这是目前所报道的最优值。优化光纤光栅压强传感机构及汾丘里管的参量,可测量其它速度段的流速,并可进一步提高传感灵敏度。     

软体操作器结构设计及植入式光纤传感方法

为解决微创手术软体机器人的形状实时监测问题,将刻有三个光纤布拉格光栅的单根光纤植入软体操作器中,利用其研究柔性硅胶软体操作器光纤传感和三维形状重构方法。进行了软体操作器的结构设计及模型建立,并对光纤光栅波长漂移量和软体操作器弯曲曲率之间的关系进行了理论分析;通过实验验证了软体操作器结构设计及其模型建立的有效性,测试了软体操作器不同弯曲状态下三个FBG传感器的反射谱特征及其变化规律;通过分析三个FBG传感器的中心波长漂移量,利用线性插值算法计算出软体操作器在不同弯曲状态下的曲率等参数,并结合曲线拟合方法实现软体操作器的三维形状重构。实验结果表明:植入式光纤光栅传感方法可以实现硅胶软体手术操作器的三维形状传感,在微创外科手术领域具有广阔的应用前景。     

含耐高温涂覆层长周期光纤光栅的温度特性研究

利用逐点写入法在耐高温光纤中用红外飞秒激光直接写入了长周期光纤光栅,研究了光栅的高温温度特性,并做了理论分析.通过对含耐高温涂覆层的长周期光纤光栅进行20 ℃~300 ℃的温度传感实验,结果表明：在高温段光栅的谐振波长漂移量与温度之间仍能保持大的灵敏度（0.060 5 nm/℃）和好的线性度,且光纤耐高温涂覆层不受破坏,光纤耐高温涂覆在高温下不会出现碳化现象,光栅传感性能良好.实验证明该方法制作的光栅适合于长期在高温环境下使用,应用价值巨大.     

光纤布喇格光栅中心波长反向漂移的实验研究

以较大载荷轴向拉伸光纤布喇格光栅时,由于裸纤与涂覆层的弹性模量不同,会产生中心波长反向漂移现象,严重影响了传感器的准确度与测量范围.实验研究表明,在光纤固定端适当剥除一段涂覆层,然后将裸露部分与带涂覆层部分同时固定,可将光纤布喇格光栅的中心波长反方向漂移量控制在10－3 nm以内,同时可增大光纤布喇格光栅的有效调谐范围,并使其能够保持较好的线性度,实验结果与理论计算结果相符合.     

温度对光纤布喇格光栅化学传感器性能的影响

阐述了光纤Bragg光栅化学传感的基本原理,推导并利用数值计算得出了腐蚀掉包层后的光纤Bragg光栅的纤芯有效折射率随外界折射率变化的关系.分析了温度对这种传感器造成的误差.研究表明,温度会造成光纤光栅变化和改变溶液折射率的大小,从而对传感器的测量造成影响.设计了一种温度补偿方案.实验分别研究了低浓度溶液和高浓度溶液中传感头两段不同光栅区的Bragg波长随温度的变化.结果表明：在清水中,传感头两段光栅区Bragg波长受到温度变化的影响基本相同,通过测量波长的差值可消除温度的影响;高浓度溶液中,传感头受温度影响造成的总波长漂移量约为未被腐蚀光栅区的波长漂移量的0.6,与理论的结果基本一致.传感头受温度影响造成的总波长漂移量可由未被腐蚀光栅区波长漂移量的大小得出,进而可消除温度对溶液传感的影响.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.