Design of diamond-shape photonic crystal fiber polarization filter based on surface plasma resonance effect

A novel plasmonic polarization filter based on the diamond-shape photonic crystal fiber(PCF) is proposed. The resonant coupling characteristics of the PCF polarization filter are investigated by the full-vector finite-element method. By optimizing the geometric parameters of the PCF, when the fiber length is 5 mm, the polarization filter has a bandwidth of 990 nm and an extinction ratio(ER) of lower than -20 dB. Moreover, a single wavelength polarization filter can also be achieved, along with an ER of -279.78 dB at wavelength 1.55 μm. It is believed that the proposed PCF polarization filter will be very useful in laser and optical communication systems.     

Polarisation-sensitive four-wave mixing and soliton self-frequency shift effect in the highly birefringent photonic crystal fibre

By adjusting the polarisation state of the pump at 805 nm parallel to slow (x) and fast (y) axes of the highly birefringent photonic crystal fibre with zero dispersion wavelengths 790 nm and 750 nm, this paper demonstrates the efficient polarisation-sensitive four wave mixing involved in pump, anti-Stokes and Stokes signals and soliton self-frequency shift effects induced by the phase-matching between red-shifted solitons and blue-shifted dispersive waves. If the reduction of coupling efficiency to the circular pump laser mode or other circular fibres due to asymmetry of the core is neglected, more than 98% of the total input power is kept in a single linear polarisation. Controlled dispersion characteristic of the doublet of fundamental guided-modes results in achieving light field strongly confined in principal axes of photonic crystal fibre, and enhancing the corresponding nonlinear-optical process through the remarkable nonlinear birefringence.     

Numerical investigation of slow solitons in Bragg gratings with a hyperbolic tangent apodization

This paper numerically and analytically investigates the formation and propagation motion of optical soliton in the Bragg grating.We choose the fibre Bragg grating with hyperbolic tangent apodization in the middle section in order to obtain slower solitons.Optical fibre soliton but not Bragg grating soliton is used as input pulse in the discussion,which is much more approximate to the light source for the practical purpose.We discuss in detail the effects of the soliton’s velocity with some parameters in the process of transmission.The results show that by choosing special parameters,one can make the soliton slow-down with a little distortion and energy decay and obtain tunable time-delay on a small scale.     

Ultra-lightweight and wide field of view augmented reality virtual retina display based on optical fiber projector and volume holographic lens

A novel see-through virtual retina display(VRD) system is proposed in this Letter. An optical fiber projector is used as the thin-light-beam source, which is modified from a laser scan projector by separating the laser sources and the scan mechanical structure. A synthetic aperture method is proposed for simple, low-cost fabrication of a volume holographic lens with large numerical aperture. These two key performance-enhanced elements are integrated into a lightweight and ordinary-glasses-like optical see-through VRD system. The proposed VRD system achieves a weight of 30g and a diagonal field of view of 60°.     

Six-bit all-optical quantization using photonic crystal fiber with soliton self-frequency shift and pre-chirp spectral compression techniques

In this paper,we propose an optical quantization scheme for all-optical analog-to-digital conversion that facilitates photonics integration.A segment of 10-m photonic crystal fiber with a high nonlinear coefficient of 62.8 W 1/km is utilized to realize large scale soliton self-frequency shift relevant to the power of the sampled optical signal.Furthermore,a 100-m dispersion-increasing fiber is used as the spectral compression module for further resolution enhancement.Simulation results show that 317-nm maximum wavelength shift is realized with 1550-nm initial wavelength and 6-bit quantization resolution is obtained with a subsequent spectral compression process.     

Highly sensitive digital optical sensor with large measurement range based on the dual-microring resonator with waveguide-coupled feedback

We propose a novel high-performance digital optical sensor based on the Mach-Zehnder interferential effect and the dual-microring resonators with the waveguide-coupled feedback. The simulation results show that the sensitivity of the sensor can be orders of magnitude higher than that of aconventional sensor, and high quality factor is not critical in it. Moreover, by optimizing the length of the feedback waveguide to be equal to the perimeter of the ring, the measurement range of the proposed sensor is twice as much as that of the conventional sensor in the weak coupling case.     

Investigation on Guided-Mode Characteristics of Hollow-Core Photonic Crystal Fibre at Near-Infrared Wavelengths

Guided-mode characteristics of hollow-core photonic crystal fibre （HC-PCF） are experimentally and theoretically investigated. The transmission spectrum in the range from 755 to 845nm is observed and the loss is measured to be 0.12dB/m at 800nm by cut-back method. Based on the full-vector beam propagation method and the full-vector plane-wave method, the characteristics of mode field over propagation distance 1 m are simulated, and the results show that the propagation efficiency can be above 80%. Compared with the fundamental guided mode well confined in air core within shorter propagation distance, the second-order guided mode leaks into the cladding region and gradually attenuates due to larger refractive index difference. The primary loss factors in HC-PCF and the corresponding solutions are elementarily discussed.     

Highly efficient Cherenkov radiation generation in the irregular point of hollow-core photonic crystal fiber

Highly efficient Cherenkov radiation(CR) is generated by the soliton self-frequency shift(SSFS) in the irregular point of a hollow-core photonic crystal fiber(HC-PCF) in our laboratory.The impacts of pump power and wavelength on the CR are investigated,and the corresponding nonlinear processes are discussed.When the average power of the 120 fs pump pulse increases from 500 mW to 700 mW,the Raman soliton shifts from 2210 nm to 2360 nm,the output power of the CR increases by 2.3 times,the maximum output power ratio of the CR at 539 nm to that of the residual pump is calculated to be 24.32:1,the width of the output optical spectrum at the visible wavelength broadens from 35 nm to 62 nm,and the conversion efficiency η of the CR in the experiment can be above 32%.     

铋/铒共掺光纤荧光特性实验研究

分别用980nm和830nm的半导体激光器作为泵浦源激发铋/铒共掺光纤,采用前向和背向泵浦方式分析放大的自发辐射谱特性.实验结果表明:随着泵浦功率的增大,荧光强度显著增强.利用980nm半导体激光器,采用前向泵浦方式可激发以1 142nm和1 536nm为中心的两个辐射带,以1 142nm为最高辐射峰的3dB带宽是141nm,以1 536nm为最高辐射峰的3dB带宽是29nm.利用830nm半导体激光器,采用前向泵浦方式可激发以1 421nm为中心的荧光谱,3dB带宽是447nm.980nm和830nm激光器分别前向泵浦铋/铒共掺光纤时,随着光纤长度的增加,荧光先增强后减弱;分别背向泵浦铋/铒共掺光纤时,随着光纤长度的增加,荧光强度先逐渐增强后保持稳定.在25~80℃的温度范围内,铋/铒共掺光纤的荧光强度几乎不受温度的影响.使用980nm和830nm泵浦源同时激发铋/铒共掺光纤,结果表明铋/铒共掺光纤的发光中心具有相对独立性,发光范围存在部分重叠.     

3D display with uniform resolution and low crosstalk based on two parallax interleaved barriers

The resolution of the parallax image is inversely proportional to the view number in the horizontal direction for the traditional autostereoscopic display based on a parallax barrier. To balance the resolution in the vertical and horizontal directions, two parallax interleaved barriers are designed. The liquid crystal display panel provides the synthetic image with square pixel units, and the pixels in a unit are distributed to different horizontal views. Two parallax interleaved barriers work together to modulate pixels in vertical and horizontal directions. 3D display with uniform resolution and low crosstalk is demonstrated.