微穿孔板吸声结构水下应用研究

马大猷教授提出的微穿孔板吸声结构在空气噪声降低和隔离方面得到了广泛的应用,但未见水下应用的相关研究和报道。本文将空气中微穿孔板理论应用到水中,得到了水下微穿孔板吸声结构的吸声公式。通过理论分析,得出了微穿孔板结构直接应用于水中无法获得宽频吸收的结论。提出了通过匹配液将微穿孔板间接应用到水下的设想。设计了单层板和双层板吸声结构,并对它们的吸声特性进行了理论分析与仿真。结果表明,本文设计的微穿孔板吸声结构在水中能够获得优于空气中的宽频带吸声效果。实验测量了自制的微穿孔板吸声结构,吸声系数的测量值与理论曲线基本吻合,从而验证了理论分析的正确性。     

内置谐振器的轻薄宽频吸声器结构设计与分析*

微穿孔板吸声器的吸声频带相较于亥姆霍兹谐振器更宽,但其低频吸声的实现需要较大的空气背腔,这对结构尺寸有限制的场合存在一定局限性。本文设计了一种轻薄吸声降噪结构(内置亥姆霍兹谐振器的微穿孔板吸声器,简称MPPHR),将微穿孔板吸声器与亥姆霍兹谐振器进行了结合,提升吸声器的低频吸声性能的同时兼具了微穿孔板宽带吸声的优点。首先基于微穿孔板和亥姆霍兹谐振器理论建立了等效电路模型并计算了结构的声阻抗。然后通过有限元对MPPHR的吸声特性进行了参数研究。最后验证了MPPHR的声阻抗模型和有限元仿真的准确性。研究结果表明：MPPHR结构拥有更宽吸声频带,厚度仅为30mm的MPPHR的半吸收频带可达1294Hz,相较于同等厚度下的微穿孔板吸声器宽近500Hz。此外,MPPHR拥有更好的低频吸声效率。     

三层微穿孔板的优化设计及特性分析

根据马大猷的微穿孔板理论,计算了三层微穿孔板的吸声系数.应用遗传算法对其结构参数进行了优化,并对其吸声特性进行了分析研究,与优化后的双层微穿孔板结构进行比较,结果表明:经过遗传算法优化后的三层微穿孔板在频域上能够获得更加饱满的吸声系数曲线,接近传统吸声材料的吸声性能.并且通过实验验证了优化设计的结果.     

水下弹性微穿孔吸声结构吸声系数研究

利用模态叠加法建立了水介质微穿孔板的数学模型,基于声电类比法得到其等效电路模型。研究了弹性微穿孔板和弹性背腔对垂直入射吸声系数的影响。与空气介质中的微穿孔板不同,水下微穿孔板因结构阻抗不足,难以取得满意的吸声效果,为此提出了增强型微穿孔吸声结构,并在水介质阻抗管内对理论结果予以验证。结果表明,随着增强型弹性微穿孔板弯曲刚度的增大,其在[20,2000]Hz范围内的平均吸声系数得到提高,逐步趋近于刚性微穿孔板的结果,弹性背板使微穿孔吸声结构的吸声峰向低频移动,低频吸声效果得到提高。      

微穿孔蜂窝-波纹复合声学超材料吸声行为

民用及国防工业领域对工程材料结构提出了更高的应用需求.单一材料结构越来越难以满足实际应用需求,通过人工复合结构实现超常单一及多物理性能的超材料设计已经成为材料结构应用的重要发展方向.本文基于传统的蜂窝夹层结构,在其内部引入波纹结构,并在面板和波纹上分别进行微穿孔形成微穿孔蜂窝-波纹复合声学超材料,在其优异力学承载基础上,实现了低频段的宽频有效吸声降噪.应用微穿孔板吸声理论和声阻抗串并联理论,建立了微穿孔蜂窝-波纹复合声学超材料的吸声理论模型;发展了考虑黏热效应的声传播有限元模型,通过数值模拟验证了理论模型的准确性,并数值计算了声波在超材料微结构内的黏热能量耗散分布,发现超材料能量耗散主要集中于微穿孔处的黏性边界层;进一步开展了超材料吸声参数和尺度设计参数的分析讨论,阐明了不同尺度设计参数对超材料吸声性能的影响规律.本文工作对兼具力学承载与吸声降噪的新型材料结构设计有重要的理论指导价值.     

穿纤维微穿孔板吸声系数的有限元仿真

为拓宽微穿孔板的吸声频带,该文用有限元算法建立了典型微穿孔板和穿入不同数量金属纤维的微穿孔板模型,研究了两种微穿孔板的吸声系数、声阻抗和微孔内法向质点速度的空间分布,并进行了试验验证。有限元仿真和试验数据表明:穿入金属纤维可以拓宽微穿孔板的吸声频带,吸声系数也随纤维根数的增加而下降;吸声系数仿真结果与试验结果趋势一致,仿真模型可以有效模拟穿入纤维前后微穿孔板的吸声特性;穿入金属纤维导致黏滞效应引起的低质点速度区域增大,声阻增加,引起吸声系数的降低,而声抗变化不大。研究发现,有限元仿真方法适用于结构相对复杂的微穿孔结构的声学建模,能直观地体现微孔复杂结构的影响,值得继续深入研究和工程应用。     

面向微穿孔板吸声结构和吸声特性混合设计的软件平台

微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。     

穿孔率和穿孔直径耦合下微穿孔板吸声体整体吸声性能

微穿孔板几何参数的耦合性及其对整体吸声性能的影响,对于设计微穿孔板吸声体和优化其工作性能具有指导作用。根据微穿孔板吸声体基本理论,研究了穿孔率和穿孔直径双参数耦合作用下微穿孔板吸声体的整体吸声性能。穿孔率和穿孔直径之间的耦合性与其本身取值密切相关,而与板厚和板后腔深无明显关系;在穿孔率-穿孔直径参数域上,吸声体存在吸声系数为1.0的吸收峰,整体吸声性能随穿孔率或穿孔直径从小到大变化,呈现出先增强后减弱的变化趋势。该结论能够准确解释微穿孔板受粉尘污染后吸声性能的变化规律和演变路径。论文的工作为设计微穿孔板吸声体提供了一种新的理论依据和实施方法。      

阻尼耦合双层微穿孔板吸声体研究

提出并研究一种利用两板间微缝进行阻尼耦合的双层微穿孔板(DMPP)吸声体。该吸声体在两层微穿孔板(MPP)之间形成一个宽度小于1mm的微缝,因此其阻尼不仅可由板上的微穿孔提供,还可由两板之间形成的微缝提供。采用声电类比法建立了DMPP转移阻抗的理论模型,并进行实验验证,结果表明理论计算结果与实验吻合较好。然后利用建立的理论模型,对单层MPP和DMPP吸声体的吸声性能进行了对比研究,结果表明,相比于单层MPP,DMPP可以利用微缝提供的阻尼显著改善吸声性能,同时减少实际板厚。最后,对DMPP吸声体的吸声性能及其几何参数的关系进行研究,结果表明,当保持其它结构参数不变时,微缝宽度对DMPP吸声系数的提高存在一个最优值,超过或低于此值会导致吸声系数下降。     

关于微穿孔板吸声体频带宽度极限的讨论

依据马大猷教授的微穿孔板吸声体准确理论,利用计算机辅助设计对于该结构频带宽度极限情况从理论上进行了讨论,把极限频宽和最大吸声系数的制约关系量化,并得到此情况下应用于低频或高频环境孔径的选用范围,以及此情况下板厚和穿孔率与传统观念不同的特点。以上分析结果以及所提供的结构参数为宽频带微穿孔板的具体设计提供有价值的参考。     

An investigation on the acoustic characteristics of microperforated muffler

I.lntroductionTheac0usticperformanccofmicropcrforatedmumerhasbeengreatlynoticedinre-ccntyears.Especially,itshighsi1encingva1ueandbroadsi1encingfrequencyrangeenableittobeusedwidelyinmanyyiclds,suchasvehicleexhaustsystem,ventilator.Butitisdifficulttodesignagoodsilcnccrbecauseoritscomp1exacousticperformanccwithinPerforatedtubes.Thegoverningwaveequationofmicroperforatedmufflerisnotlinearduetothenonuniformmassflowofgasaswc11asthetcmpcraturegradientalongthePerforatedducts.Inordertoutilizethegoodsi…     

非对称阻抗插入管消声器的Chebyshev-变分法建模与求解

针对非对称阻抗插入管消声器三维理论建模与求解问题,提出了一种半解析变分建模和求解方法,试验及有限元结果验证了理论模型和求解结果的正确性,开展了模态频率、声压响应及传递损失等声场特性的预测分析。首先构建插入管消声器内部子声场拉格朗日泛函,基于声压与质点振速连续性条件,得到插入管消声器三维理论模型。随后,将子声场声压展开为切比雪夫-傅里叶级数组合形式,按里兹法求得消声器三维声场模态信息。搭建了消声器传递损失试验平台,进行了刚性壁面和阻抗壁面消声器传递损失测试试验,对理论模型和计算结果进行了验证。通过算例分析了壁面阻抗的大小、阻抗面积和分布形式以及插入管偏置对消声器消声性能的影响。结果表明,提出的变分建模求解方法是有效的,对消声器壁面阻抗位置和形式的合理设置可有效降低输出声压。      

不同声强宽带噪声激励下结构参数对穿孔板消声器吸声特性影响的实验研究

高声压级激励下,由于非线性效应的存在,穿孔板消声器的吸声特性将发生改变,而改变量的大小与穿孔板的结构参数(穿孔率,孔径,板厚)密切相关。本文设计搭建了实验平台来研究结构参数的变化对穿孔板消声器的吸声特性的影响。根据实验结果发现:随着声压级的升高,由于穿孔板结构的非线性加剧,其声阻抗将发生变化,导致穿孔板消声器的吸收峰值降低,但吸收频带却拓宽了;在穿孔率一定的情况下,孔径越小的穿孔板消声器更适合低声压级环境工作;在孔径一定的情况下,穿孔率越低的穿孔板消声器也更适合低声压级环境工作。     

Multiobjective muffler shape optimization with hybrid acoustics modeling

This paper considers the combined use of a hybrid numerical method for the modeling of acoustic mufflers and a genetic algorithm for multiobjective optimization. The hybrid numerical method provides accurate modeling of sound propagation in uniform waveguides with non-uniform obstructions. It is based on coupling a wave based modal solution in the uniform sections of the waveguide to a finite element solution in the non-uniform component. Finite element method provides flexible modeling of complicated geometries, varying material parameters, and boundary conditions, while the wave based solution leads to accurate treatment of non-reflecting boundaries and straightforward computation of the transmission loss (TL) of the muffler. The goal of optimization is to maximize TL at multiple frequency ranges simultaneously by adjusting chosen shape parameters of the muffler. This task is formulated as a multiobjective optimization problem with the objectives depending on the solution of the simulation model. NSGA-II genetic algorithm is used for solving the multiobjective optimization problem. Genetic algorithms can be easily combined with different simulation methods, and they are not sensitive to the smoothness properties of the objective functions. Numerical experiments demonstrate the accuracy and feasibility of the model-based optimization method in muffler design.     

GA optimization on multi-segments muffler under space constraints

Whilst the space volume of muffler in noise control system is often constrained for maintenance in practical engineering work, the maximization on muffler’s performance becomes important and essential. In this paper, a novel approach genetic algorithms (GAs) based on the principles of natural biological evolution will be used to tackle this optimization of muffler design [M. Mitchell, An Introduction to Genetic Algorithms, The MIT Press, Cambridge, MA, 1996]. Here, the shape optimization of multi-segments muffler coupled with the GA searching technique is presented. The techniques of binary genetic algorithms (BGA) together with the commercial MATLAB package [G. Lindfield, J. Penny, Numerical Method Using Matlab, second ed., Prentice Hall, Englewood Cliffs, NJ, 2000] are applied in GA searching. In addition, a numerical case of pure tone elimination with 2-5 segments on muffler is introduced and fully discussed. To achieve the best optimization in GA, several GA parameters are on trial in various values. Results show that the GA operators, including crossover mutation and elitism, are essential in accuracy. Consequently, results verify that the optimal sound transmission loss at the designed frequency of 500 Hz is exactly maximized. The GA optimization on multi-segments muffler proposed in this study surely provides a quick and correct approach.     

The research on semi-active muffler device of controlling the exhaust pipe’s low-frequency noise

In order to control low frequency noise in exhaust pipe, this paper puts forward a new concept of H-Q tube based semi-active muffler device. The semi-active muffler device and bench testing system have been designed and operated. Finite element simulation study on semi-active muffler and experimental study on semi-active muffler and passive muffler have been carried on. The effect of simulation and experiment are consistent. The semi-active muffler device acts well in low frequency band, especially between 50 Hz and 150 Hz. The average level of noise reduction is around 35 dB, which is much better than passive muffler. Between 150 Hz and 350 Hz, semi-active muffler has a better performance than passive muffler; above 350 Hz, it has worse performance compared with the passive muffler.     

Expansion-chamber muffler for impulse noise of pneumatic frictional clutch and brake in mechanical presses

A compound expansion-chamber muffler, which consists of a sound absorbing chamber and a switch valve, the chamber integrating structural features of impedance muffler and micropunch plate muffler, is proposed to diminish impulse exhaust noise of pneumatic friction clutch and pneumatic friction brake (PFC/B) in mechanical presses. The structure decreases the impulse exhaust noise of PFC/B over 30 dB(A). A one-dimensional flow model is applied to study the aerodynamic characteristics of compound exhaust process of the single acting cylinder and muffler because the exhaust time is a critical factor for application of muffler in PFC/B. The volume of sound absorbing chamber is found to be an important design parameter to minimize the exhaust resistance of pneumatic cylinder. Experiments are also conducted to validate analytical results. Then the effects of diameter of exhaust ducts and volume of muffler on the exhaust time are discussed in detail. The proposed one-dimensional computational method, which considers the coupling of air-flow field and sound field, gives satisfactory results for the preliminary design of an expansion-chamber muffler. This method has been applied to an existing model HKM3-40MN to reduce its impulse noise.     

A theoretical study on the effect of a permeable membrane in the air cavity of a double-leaf microperforated panel space sound absorber

A double-leaf microperforated panel absorber (DLMPP) is composed of a two microperforated panel (MPP) with a air cavity in-between, and without any backing structure. It shows a Helmholtz-type resonance peak absorption and additional low frequency absorption, therefore it can be used as a wideband space sound absorber. In this study, a theoretical study is made to examine the effect of a permeable membrane inside the air-cavity. Permeable membranes are studied in our previous studies and proved to be effective to improve the sound absorption performance of various type MPP sound absorbers. We investigate the absorption characteristics of a DLMPP with a permeable membrane in the cavity through numerical examples, and also studied the effect of honeycomb in the cavity of the same sound absorption structure.     

Simulations and experiments for hybrid noise control systems

The purpose of this study is to explore the effects of sound elimination in a cylindrical duct by combining a reactive muffler and active noise control (ANC) system. Besides the exploration via experiment of the combined noise control system, a Grey prediction based on Grey theory is also applied to ANC for this hybrid system.In the experiment for this system, a combined adaptive algorithm is adopted. The results of sound elimination are compared between cases with ANC systems installed before the muffler and after the muffler. The results indicate that the sequence of arrangement of muffler can influence the results of active noise control. According to the results of experiment and simulation, the effect of noise reduction in ANC system is influenced extremely by reference signal received. The transmission loss and insertion loss in this system are also discussed in details. Besides, the experimental results indicate that the hybrid system has the advantages over a traditional muffler when the muffler is not designed for the frequency of the noise. Furthermore, the mathematic simulation for acoustic field in a cylindrical duct with a muffler is performed in order to verify the experiment results. Finally, Grey theory is applied to estimate the expected signals in order to perform a computer simulation of Grey prediction to explore effects of the ANC system. The results indicate that application of Grey theory gives a good control for the hybrid system.     

基于低频吸声超构材料的复合消声器研究*

针对管道内低频噪声难以抑制的问题，本文基于亥姆霍兹共振腔（HR）阵列吸声板和穿孔管消声器组合，设计了一种复合式宽带消声器。首先利用有限元法仿真分析传统穿孔管消声器，发现中低频消声能力较差，通过嵌入HR阵列吸声板吸收中低频噪声。采用仿真与实验的方式研究吸声板的声学性能：在400-1000 Hz频段内的平均吸声系数达到了0.88。然后对复合式消声器进行数值模拟及3D打印阻抗管实验测试对比：复合式消声器在400-1718Hz频率范围内的平均传递损失为18.15 dB ，最终实现了管道内全频带噪声有效控制。