水下微穿孔吸声体结构设计与试验研究

根据马大猷院士的微穿孔板(MPP)理论,提出在可设计的夹芯复合隐身结构的空腔中附加微穿孔板层的水下微穿孔吸声体。基于微穿孔板的精确计算理论及水下声隐身结构的特点,考虑空腔深度、穿孔板厚度、穿孔直径及穿孔率等对微穿孔板吸声性能的影响,对水下微穿孔吸声体进行了结构设计。利用脉冲声管法对水下微穿孔吸声体试样的吸声系数进行了测量,结果表明:水下微穿孔吸声体有效地拓宽了低频吸声频带,其微穿孔板结构参数的影响规律也与理论分析一致;对于多种吸声机理并存的水下微穿孔吸声体的空腔个数、形状及谐振特性等也是影响吸声性能的重要因素,在实际的工程应用中必须结合所关心的频带对水下微穿孔吸声体进行匹配优化设计。      

穿孔率和穿孔直径耦合下微穿孔板吸声体整体吸声性能

微穿孔板几何参数的耦合性及其对整体吸声性能的影响,对于设计微穿孔板吸声体和优化其工作性能具有指导作用。根据微穿孔板吸声体基本理论,研究了穿孔率和穿孔直径双参数耦合作用下微穿孔板吸声体的整体吸声性能。穿孔率和穿孔直径之间的耦合性与其本身取值密切相关,而与板厚和板后腔深无明显关系;在穿孔率-穿孔直径参数域上,吸声体存在吸声系数为1.0的吸收峰,整体吸声性能随穿孔率或穿孔直径从小到大变化,呈现出先增强后减弱的变化趋势。该结论能够准确解释微穿孔板受粉尘污染后吸声性能的变化规律和演变路径。论文的工作为设计微穿孔板吸声体提供了一种新的理论依据和实施方法。      

三层微穿孔板的优化设计及特性分析

根据马大猷的微穿孔板理论,计算了三层微穿孔板的吸声系数.应用遗传算法对其结构参数进行了优化,并对其吸声特性进行了分析研究,与优化后的双层微穿孔板结构进行比较,结果表明:经过遗传算法优化后的三层微穿孔板在频域上能够获得更加饱满的吸声系数曲线,接近传统吸声材料的吸声性能.并且通过实验验证了优化设计的结果.     

微缝吸声体理论

窄缝可做为声学原件,这是已知的。窄缝的声阻抗严格公式以及低频近似公式都存在。本文发展了窄缝的基本理论,求得了其声阻抗的简单实用公式。由此可见,缝宽减小至丝米级,其阻抗比将超过一,因而微缝板加后腔形成的微缝吸声体可具有良好吸声性能,而不需任何多孔性或纤维性材料。文中提出微缝吸声体的概念和严格理论,并讨论其吸声性能。微缝吸声体的公式与微穿孔吸声体的完全相似,只是其声阻系数较小而声抗过大,一般说,如参数相同,其吸声特性将比微穿孔吸声体为差。改进措施可有效地补救。     

计及孔间相互作用的微穿孔板吸声特性研究

计算微穿孔板吸声系数时,假设孔间的相互作用可以忽略。计算具有不同直径微孔的穿孔板吸声系数并提高其计算精度,孔间的相互作用不能再忽略。在马大猷、Melling(梅尔林)等前人研究的基础上,根据声波辐射和传播原理,分析微孔之间的相互作用,通过修正微孔的实际等效长度,得到计及孔间相互作用微孔板吸声系数模型,并进行理论计算和实验测试。研究结果表明:影响微穿孔板吸声系数除结构参数外,还应考虑孔间的相互作用;计及微孔板各孔间相互作用,能提高共振频率、吸声系数理论值的计算精度,计算值逼近实验测试结果。     

微穿孔板几何参数估算及其对吸声性能的影响

不规则孔微穿孔板几何参数无法直接获知,造成吸声性能计算困难,故提出一种微穿孔板几何参数估算方法。将不规则孔等效处理为圆孔,利用马氏理论关于圆孔微穿孔板的基本理论,建立了微穿孔板几何参数估算模型;将参数估算结果用于吸声性能预测,理论计算与实验结果吻合。根据微穿孔板几何参数对高吸声性能区域的影响,探讨了马氏理论适用极限与微穿孔板几何参数的关系,以及微穿孔板受粉尘污染后吸声性能演变规律。将微穿孔板参数点取在面积较大的高吸声性能区域中间部位,可获得较大的马氏理论适用极限;微穿孔板参数点位于高吸声性能区域右上部位时,一定程度的粉尘污染不会降低吸声性能.      

薄纤维层对穿孔板的声学影响研究

为了提高附着薄纤维层穿孔板的声学预测精度,通过实验及理论分析方法研究薄纤维层对穿孔板的声学影响。采用声学阻抗管系统测试穿孔饰面板及背腔的吸声系数。测试结果显示,薄纤维层对吸声层的吸声性能具有明显的提高作用。以穿孔板声阻抗模型为基础构建附着薄纤维层的穿孔饰面板等效声阻抗模型,以附加修正参数等效薄纤维层的声学影响。依据吸声系数测试结果计算薄纤维层的等效声学修正参数,结果显示薄纤维层造成的附加阻性修正比较显著。     

面向微穿孔板吸声结构和吸声特性混合设计的软件平台

微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。     

微穿孔吸声体随机入射吸声性能

依据“扩散场内微穿孔板吸声特性的实验研究”一文初步实验结果,对微穿孔板吸声体在扩散场内吸声特性进行了进一步探讨。在穿孔板常数K值较大时,（K＞2）,发现扩散场吸声特性与垂直入射情况相似但移到较高频率范围,除主要吸声频带外,在较高频率由于余切函数的多支性,还有次吸声频带但影响较小．k值较小（K≤2）时,扩散声场吸声特性在高频段的次吸声频带越来越重要,逐渐成为吸声的重要因素,使微穿孔板吸声结构在三或四倍频程以上具有高吸声系数,增加了它的实用价值。文中对扩散场内微穿孔扳吸声性质的变化作了具体计算并作了解释．     

微穿孔板吸声结构水下应用研究

马大猷教授提出的微穿孔板吸声结构在空气噪声降低和隔离方面得到了广泛的应用,但未见水下应用的相关研究和报道。本文将空气中微穿孔板理论应用到水中,得到了水下微穿孔板吸声结构的吸声公式。通过理论分析,得出了微穿孔板结构直接应用于水中无法获得宽频吸收的结论。提出了通过匹配液将微穿孔板间接应用到水下的设想。设计了单层板和双层板吸声结构,并对它们的吸声特性进行了理论分析与仿真。结果表明,本文设计的微穿孔板吸声结构在水中能够获得优于空气中的宽频带吸声效果。实验测量了自制的微穿孔板吸声结构,吸声系数的测量值与理论曲线基本吻合,从而验证了理论分析的正确性。     

Enhancement of low-frequency sound absorption of microperforated panels by adding a mechanical impedance

In order to solve the bad low frequency sound absorption of the Micro-Perforated panel(MPP)absorber,mechanical impedance was introduced in the back of the MPP absorber to form a composite structure.According to the same particle vibration velocity on both sides of a plate,the mechanical impedance plate transfer matrix could be obtained.The units of the mechanical impedance,cavity and MPP were connected in series with the use of the transfer matrix method,thus creating the composite structure’s theoretical calculation model.The quality factor affecting absorption bandwidth was analyzed.Bandwidth is inversely proportional to the mechanical impedance plate mass.During the experiments,when at close to 400 Hz,the composite structure reached an absorption peak with a coefficient of above 0.8.Experimental results concurred with theoretical calculations.Mechanical resonance is added based on the traditional MPP resonance sound absorption mechanism.Through this,the performance of low frequency sound absorption can be improved without increasing the thickness of the structure.The frequency band can be broadened by reducing the mechanical impedance plate mass and controlling its boundary-damping coefficient.     

机械阻抗与声阻抗结合提高微穿孔板低频吸声性能

提出了在微穿孔板后部引入机械阻抗形成组合结构来解决微穿孔板低频吸声性能差的问题。由机械阻抗板两侧质点速度相同得出机械阻抗单元的传递矩阵,采用传递矩阵法将其与空腔、微穿孔板单元串接,建立组合结构理论计算模型;通过分析品质因子获得带宽与机械阻抗板质量成反比;试验得出组合结构在400 Hz附近有系数为0.8以上的吸声峰值,试验结果与理论计算吻合。在传统微穿孔板共振吸声机制的基础上加入机械共振,能够实现在不增加结构厚度的前提下提高低频吸声性能;降低机械阻抗板质量并且适当控制边界阻尼系数可以实现吸声频带的拓宽。      

Experimental study on sound absorption performance of microperforated panel with membrane cell

Microperforated panel (MPP) absorbers have been widely used in noise reduction and are regarded as a promising alternative to the traditional porous materials. However, the absorption bandwidth of a single-layer MPP is insufficient to compete with the porous materials. In order to improve the sound absorption ability of the single-layer MPP, a composite MPP sound absorber with membrane cells (MPPM) is introduced. Sound absorption properties of the MPPM are studied by the impedance tube experiment. Results show that the membranes have a significant influence on the sound impedance. The sound absorption performance of MPPM gradually increases with the increase of the membrane area. The single-layer MPP with some small area membrane cells may have the same effect and single large area membranes. By adjusting the size of the membrane cells, one can implement a sound absorber with a wider absorption bandwidth and higher absorption peaks than the single-layer MPP.     

内置谐振器的轻薄宽频吸声器结构设计与分析*

微穿孔板吸声器的吸声频带相较于亥姆霍兹谐振器更宽,但其低频吸声的实现需要较大的空气背腔,这对结构尺寸有限制的场合存在一定局限性。本文设计了一种轻薄吸声降噪结构(内置亥姆霍兹谐振器的微穿孔板吸声器,简称MPPHR),将微穿孔板吸声器与亥姆霍兹谐振器进行了结合,提升吸声器的低频吸声性能的同时兼具了微穿孔板宽带吸声的优点。首先基于微穿孔板和亥姆霍兹谐振器理论建立了等效电路模型并计算了结构的声阻抗。然后通过有限元对MPPHR的吸声特性进行了参数研究。最后验证了MPPHR的声阻抗模型和有限元仿真的准确性。研究结果表明：MPPHR结构拥有更宽吸声频带,厚度仅为30mm的MPPHR的半吸收频带可达1294Hz,相较于同等厚度下的微穿孔板吸声器宽近500Hz。此外,MPPHR拥有更好的低频吸声效率。     

高声压级时多孔金属板的吸声特性研究

针对高声压级下有限厚度多孔金属板在线性阻抗背衬条件下(背衬表面声压与声质点速度为线性关系)的吸声问题,提出了一个描述不同声压级下材料层法向吸声性能的一维模型,并给出求解材料层内部声质点速度的线化与差分方法,以预测多孔金属板在高声压级下的非线性吸声特性。在阻抗管中对两块多孔金属板进行了声学测试,得到了材料层法向表面阻抗和吸声系数随入射声压级变化的实验结果。研究表明:实验与理论预测符合良好,验证了模型与数值方法的正确性。本文所提原理和方法,可用于一般硬质多孔材料。      

Improving low-frequency sound absorption of micro-perforated panel absorbers by using mechanical impedance plate combined with Helmholtz resonators

The traditional Micro-perforated plate (MPP) is a kind of clean and non-polluting absorption structure in the middle and high frequency and has been widely used in the field of noise control. However, the sound absorption performance is dissatisfied at low frequencies when the air-cavity depth is restricted. In this paper, a mechanical impedance plate (MIP) is introduced into the traditional MPP structure and a Helmholtz resonator is attached to the MIP. Mechanical impedance plate (MIP) provides a good absorption at low frequency by using mechanism of mechanical resonance and the acoustic energy is dissipated in the form of heat with viscoelastic material. Helmholtz resonator can fill in the defect of the poor absorption effect between the Micro-perforated plate (MPP) and the mechanical impedance plate (MIP). The acoustic impedance of the proposed sound absorber is investigated by using acoustic electric analogy method and impedance transfer method. The influence of the tube’s length of Helmholtz resonator and the number of Helmholtz resonator on the sound absorption is studied. The corresponding results are in agreement with the theoretical calculation and prove that the composite structure has the characteristics of improving the low frequency sound absorption property.     

Sound absorption characteristics of a double-leaf structure with an MPP and a permeable membrane

As for the sound absorbing system using an MPP (microperforated panel), a double-leaf MPP sound absorber has been studied so far. However, this structure uses two MPPs, which are still expensive, and is disadvantageous when its cost is concerned. Therefore, it is considered that it can be advantageous if one of the leaves can be replaced with a less expensive material keeping high sound absorption performance. In this study, the possibility of producing a useful sound absorbing structure with an MPP and a permeable membrane as an alternative less expensive material is examined. The acoustic properties of this MPP and permeable membrane combination absorber are analysed theoretically with a Helmholtz integral formulation. The absorption performance and mechanism are discussed through the numerical examples. Also, the effect of a honeycomb in the air cavity, which is to be used for reinforcing the structure, is also discussed through a theoretical analysis.     

Oblique incidence sound absorption of parallel arrangement of multiple micro-perforated panel absorbers in a periodic pattern

The sound absorption performance of a micro-perforated panel (MPP) absorber array at oblique incidence and in diffuse field is investigated both numerically and experimentally. The basic module of the MPP absorber array consists of four parallel-arranged MPP absorbers with different cavity depths, and the whole MPP absorber array is created by arranging the basic modules in a periodically repeating pattern. Results show that the influence of incidence angle mainly lies in two aspects. First, the parallel absorption mechanism breaks down at lower frequencies at oblique incidence than at normal incidence due to the non-compactness of the resonating MPP absorber, which becomes non-compact if the time delay of incident wave across it is comparable to or larger than π/2. Second, the equivalent acoustic impedance of the MPP varies with respect to incidence angle which in turn changes the sound absorption performance of the MPP absorber array. Influence of the azimuthal angle is insignificant. Because of mutual influence among the member MPP absorbers, the normal incidence sound absorption of the MPP absorber array can be noticeably different from that of the basic module tested in impedance tube. The measured sound absorption coefficients of a prototype specimen in reverberation room compare well with the numerical predictions. The extra sound absorption due to diffraction of sound at the free edges of test specimen is the most efficient around 500 Hz.     

A theoretical study on the effect of a permeable membrane in the air cavity of a double-leaf microperforated panel space sound absorber

A double-leaf microperforated panel absorber (DLMPP) is composed of a two microperforated panel (MPP) with a air cavity in-between, and without any backing structure. It shows a Helmholtz-type resonance peak absorption and additional low frequency absorption, therefore it can be used as a wideband space sound absorber. In this study, a theoretical study is made to examine the effect of a permeable membrane inside the air-cavity. Permeable membranes are studied in our previous studies and proved to be effective to improve the sound absorption performance of various type MPP sound absorbers. We investigate the absorption characteristics of a DLMPP with a permeable membrane in the cavity through numerical examples, and also studied the effect of honeycomb in the cavity of the same sound absorption structure.     

Sound absorption of microperforated panel mounted with helmholtz resonators

Microperforated panel (MPP) absorbers have been widely used in noise reduction and are regarded as a promising alternative to the traditional porous materials. However, the absorption bandwidth of a single-layer MPP is insufficient to compete with the porous materials. In order to improve the sound absorption ability of the single-layer MPP, MPP mounted with Helmholtz resonators (MPPHR) is introduced. Based on the MPP, Helmholtz resonators theory and electro-acoustical equivalent circuit principle, sound absorption properties of MPPHR are studied. Simulation and experimental results show that MPPHR have two peak frequencies and one anti-resonant frequency. The low-frequency peak is dependent on the Helmholtz resonators, while the high frequency peak is close to the peak of the single-layer MPP. The low-frequency sound absorption peaks move to low frequency with the neck length and the volume of Helmholtz resonators increasing. The high-frequency sound absorption peaks move to high frequency with the volume of Helmholtz resonators cavity increasing. Multiple Helmholtz resonator parallel MPP structure can provide more sound absorption than single MPPHR at low frequency range due to the introduction of more additional sound absorption peaks.