RIBLL终端LASCAR闪烁体阵列探测器研制进展

介绍了RIBLL终端LASCAR闪烁体阵列探测器的工作原理和结构特点. 描述了为满足放射性核束实验的要求而对阵列所作的重要改进. 给出了LASCAR构型优化改造的工作设想和实施步骤. The principles and structure characteristics of LASCAR scintillator array detector at RIBLL terminal are described. Special emphases are laid upon the latest progress for the development of LASCAR array detector to meet the requirements of the RIB experiments. The working plan and steps for optimizing configuration of the LASCAR multi unit neutron scintillator array detector are also presented.     

RIBLL终端大面积光纤阵列探测器研制

描述了RIBLL终端大型探测器之一的大面积闪烁光纤阵列探测器（LASFA）的工作原理和结构特点, 报道了LASFA的研制以及单元性能的改进与测试。 LASFA具有很高的时间分辨和空间分辨能力, 可以很好地测量RIBLL终端各种轻带电粒子的信息。 The principles and structure characteristics of Large Area Scintillating Fiber Array(LASFA) detector at RIBLL (Radioactive Ion Beam Line in Lanzhou) are described. The development of LASFA and the characteristics of the scintillating fibers unit are reported. LASFA can be used to detect the light charged particles at RIBLL terminal due to its good time and spatial resolutions.     

新核素合成、高激发热核和放射性束物理前沿再获一批重要成果

综述了中国科学院近代物理研究所最近三年来在新核素合成、高激发热核和放射性束物理前沿领域取得的重要进展．其主要成果是在兰州重离子加速器和放射性束流线上获得的.The recent remarkable achievements in IMP in the research frontiers of synthesis of new nuclides, highly excited hot nuclei and radioactive ion beam physics are reviewed. Most of the achievements are made at the HIRFL and RIBLL of IMP.     

Shell Evolution Study for New Magic Number N =32 via Isochronous Mass Spectrometry

Recent results and progress of mass measurements of neutron-rich nuclei utilizing Isochronous Mass Spectrometry (IMS) based on the HIRFL-CSR complex at Lanzhou are reported. The nuclei of interest were produced through projectile fragmentation of primary 86Kr ions at a realistic energy of 460.65 MeV/u. After in-flight separation by the fragment separator RIBLL2, the fragments were injected and stored in the experimental storage ring CSRe, and their masses were determined from measurements of their revolution times. The re-determined masses were compared and evaluated with other mass measurements, and the impact of these evaluated masses on the shell evolution study is discussed.     

RIBLL传输效率研究

利用实验测量和Monte Carlo模拟的方法,研究了RIBLL的传输效率。分析了影响传输效率的主要因素, 发现碎片的动量分布形式对传输效率的模拟结果有重要的影响。 另外通过比较, 发现大部分碎片传输效率的模拟结果稍大于实验测量结果, 两者最大相差约几十倍, 这可以帮助估算次级束流强度, 指导实验设计。 he transmission of RIBLL has been studied by experimental measurement and Monte Carlo simulation methods. The analysis of influence factors of the simulated transmission has been accomplished, and it was found that the momentum distribution of fragments is one of the most important factors influencing the simulation results. Furthermore, through comparing the measured and simulated results, it is found that the simulated result is larger than the measured transmission for most fragments and the maximal difference between them is about several tens of times. This simulation is a good theory tools for estimating the intensity of the secondary beam and designing the experiment in the future.     

Design of Multi-unit Control System of High Voltage Power Supply for LASCAR Scintillator Detector Array

The power voltages of Photomultipliers (PMTs) at RIBLL LASCAR scintillator detector array are distributed between 900 V and 1 800 V irregularly. 392 CC123 modules are employed to supply high voltage for the PMT array. The CC123 module serves as PMT interface groupware package, and it can transform 12 V DC input voltage to ranges of 0～-2200 V for the PMT power supply corresponding to 0～ 5 V output voltage from the control board crate. The relation of PMT power supply with the output voltage of the control crate is shown in Fig.1.     

Performance Test of LASCAR Scintillator Detector Array at RIBLL

The LASCAR (Large Area Scattering Chamber at PABLL) scintillator detector array is developed to detect neutrons and charged particles from the reaction induced by, the RIBs from RIBLL. It consists of 8 scintillator plus light guide blocks. As shown in Fig.l, each block matches with 49 photomultipliers (PMTs) of 9214SB type from Electron Tubes Limited. Some technical improvements and the latest performance test of the 294 PMTs in 6 blocks of LASCAR are described in this report.     

在放射性束装置上进行新核素鉴别及其衰变性质的研究

综述了近年来在放射束装置上进行新核素鉴别及其衰变性质研究取得的一些成果, 并简要介绍了即将在兰州放射性束装置上开展的奇异核衰变性质的研究工作． The progresses of new isotope identification and decay property studies on radioactive nuclear beam facilities are reviewed. Studies of the decay properties of exotic nuclei that will be performed at RIBLL are briefly introduced.     

THE SEPARATION TECHNIQUES FOR SECONDARY BEAMS AT RIBLL

The Bρ-ΔE-Bρ-TOF techniques used for the identification and separation of radioactive nuclear beams (RNB) at RIBLL, are described. As a PF-type radioactive nuclear beam line, RIBLL can deliver RNB with high purity for light projectiles by using Bρ-ΔE-Bρ techniques, while for heavy ones, the Bρ-ΔE-Bρ-TOF methods must be adopted in order to identify the RNB clearly.     

Experimental Evidence of Two-Proton Emissions from 18Ne Excited State

Experiment ^18Ne＋^197 Au was performed in Heavy Ion Research Facility Radioactive Ion Beam Line at Lanzhou （RIBLL）. The nuclear energy levels of ^18Ne were built by complete kinematical reconstruction of the decay products and diproton decay were observed from ^18Ne excited states. At 6.15 MeV, the experimental relative momentum and angular correlations of the emitted protons are given. The obvious enhancement at ｜qrol｜= 23 MeV/c and θc.m. = 40° shows the experimental criterion of ^2He cluster decay from ^18Ne^q.     

RIBLL束流诊断

描述了兰州放射性离子次级束流线(RIBLL)上研制并安装使用的放射性束流(RIB)诊断装置的种类、结构、性能及在AIBLL上的位置和功能.重点叙述了以光纤为基础的几种诊断元件,它们探测效率高、响应时间快、制作容易、性能稳定.给出了RIB¹⁷N等高图,说明诊断装置辅助MBLL得到RIB的水平.     

兰州放射性束流线

兰州放射性束流线（RIBLL）是产生中能重离子放射性束流（RIB）的装置和高精度放射性束物理的实验谱仪．RIBLL的立体角接收度＞65msr、动量接收度达10％;RIBLL可提供极化RIB;RIBLL采用大接收度双消色差反对称结构,既可纯化放射性束,还可作为0°磁谱仪． Radioactive Ion Beam Line in Lanzhou (RIBLL) is a facility to produce intermediate energy radioactive ion beams (RIB), and also a high precision spectrometer for RIB physical experiments. The solid angle acceptance of RIBLL is 6. 5 msr. The momentum acceptance is about 10%. The polarized RIBs will be available. RIBLL is the equipment with double achromatic and asymmetric structure. So that it can not only sublimate the RIBs in pureness, but also operate as 0° magnet spectrometer.     

Experimental Setup at RIBLL1

RIBLL1 experimental setup consists of RIB identification system,secondary target control system and secondary reaction products measurement system.The high gain x-y position sensitive PPAC with delay cable grouped readout,the scintillation foil time pickup detector focusing with ellipsoidal surface,the traverse field IC,the large area two dimensional position sensitive scintillatillator with PMT matrix readout,the Compton suppressed HPGe γ-ray detectors and twin longitudinal field iC are major components.This setup has been installed at RIBLL1.The performance measurements and test experiments are in progress.     

RIBLL2上放射性次级束粒子鉴别能力的提升

为了提升兰州重离子加速器冷却存储环(HIRFL-CSR)中放射性次级束流装置(RIBLL2)的粒子鉴别能力,在其F1色散面上研发、安装了一套可测量核反应产物起始时间和位置等信息的新型高性能探测器,并发展了一种利用测量的位置及飞行时间等实验数据提取束线光学参数从而修正粒子磁刚度的实验方法。使用F1色散面上的新型探测器,再结合粒子磁刚度修正方法,首次在RIBLL2-ETF分离器上实现了全动量接收度下300 MeV/nucleon 78Kr弹核碎裂产物的清楚鉴别,结果显示:对于较重的75As33+,其电荷分辨σ_Z~0.19、质核比分辨σ_A/Z~5.8×10?3。这一结果,有效提升了RIBLL2粒子鉴别能力,增加了奇异核收集效率,使研究范围由低质量核区(A<40)拓展到了中等质量核区(A~80),这将有效促进RIBLL2上放射性次级束物理实验的发展。     

RIBLLⅡ与CSRe中束流控制系统的设计

 介绍了兰州重离子加速器冷却存储环（HIRFL-CSR）的实验环CSRe以及次级束线RIBLLⅡ中束流控制系统的设计。该系统主要采用了Java,COM,Oracle,ARM,DSP,FPGA等技术实现了对磁铁电源的实时、同步控制,已达到对束流的控制。该系统已经运行于现场的束流调试中,并在RIBLLⅡ的束流调试中运行正常、性能稳定。     

基于LC延迟电路的双层多丝正比室的研制

描述了为兰州放射性粒子束流线（RIBLL Ⅱ）上测量束流径迹而研制的一种基于LC延迟电路的双层多丝正比室（MWPC）。该探测器的探测灵敏面积为100 mm×80 mm,位置信号由阴极丝引出并通过LC延迟电路读出。探测器由两套完整的多丝正比室组成,每套的阳极丝夹在两层平行的阴极丝之间,阳极丝和阴极丝相互垂直。两套阴极丝相互垂直给出入射粒子的二维位置信息。为了增大感应信号以提高探测效率,将每套位置对应的阴极丝合并成一路接入LC延迟电路。用55Fe-5.9 keV X射线源均匀照射探测器的灵敏区域,测试表明其具有良好的位置灵敏一致性。用X射线源通过准直狭缝扫描整个探测器的灵敏区域,得到X,Y层的位置线性度均好于0.999;其位置分辨（σ）分别为199.9 μm和154.0 μm,目前,该探测器已成功用于RIBLL Ⅱ的实验中。A double-layer Multi-Wire Proportional Chamber (MWPC) with 100 mm×80 mm active area has been developed for Radioactive Ion Beam Line in Lanzhou(RIBLL Ⅱ). The position information has been obtained by a LC delay circuit readout method. Being called of double-layer MWPC, it is composed of two full MWPCs, each consists of an anode plane sandwiched between two parallel cathode planes, anode wires and cathode wires are perpendicular to each other. In order to improve the detection efficiency, the cathode wires of corresponding position are combined to enhance inductive signal. The cathode wires of two full MWPCs are orthogonally placed to give two coordinates of the incident particles. The sensitivity uniformity is also found to be relatively good and the position resolution of X, Y direction are measured to be 199.9 and 154.0 μm using a 55Fe-5.9 keV X ray, respectively. The position linearity of X, Y direction are as good as 0.999 for whole sensitive area of the detector. The detector has been used successfully on the experiment at RIBLL Ⅱ.