高质量AIP04-5分子筛大单晶的合成与表征

以拟薄水铝石作为铝源，正磷酸为磷源，正三丙胺(TPA)作模板剂，采用水热法合成了AIPO4-5分子筛．在不同的反应物配比、温度以及晶化时间条件下，得到了不同尺寸的AIPO4-5分子筛单晶．实验表明，反应物质的摩尔比为Al2O3：P2O5：TPA：C2H5OH：H2O：HF=1：1．2：2．66：80：1000：0．7，反应温度为457K，晶化时间48h是生成六方AIPO4-5分子筛大单晶较适宜的条件；在该反应条件下合成出纵向尺度最大达到2．0mm、具有完整六方棱柱形态的MPO4-5分子筛单晶；部分晶体的横向尺度达到0．31mm．用扫描电镜观察晶体的形貌：AlPO4-5分子筛晶体结构通过SMART1000单晶衍射仪鉴定．     

K2O·CaO·4B2O3·12H2O∶Nd3+的合成及发光性能

以CaCl2、K2B4O7和Nd2O3为原料,采用易于工业化、无污染的水溶液法反应合成碱-碱土金属硼酸盐K2O·CaO·4B2O3·12H2O∶Nd3+晶体,利用X射线衍射、红外光谱、扫描电镜、荧光分光度计等现代分析测试手段,对所合成晶体进行了分析和表征.结果表明,所制备的K2O·CaO·4B2O3·12H2O∶Nd3+晶型发育良好、形貌规整.基质本身具有上转换发光特性,K2O·CaO·4B2O3·12H2O∶Nd3+的发光强度较基质弱.当激发源为828 nm时,材料呈橙红色光.     

制备条件及添加稀土对SO_4~(2-)/ZrO_2-Al_2O_3固体超强酸酸性影响的研究

用共沉淀法制备了SO4 2 -/ZrO2 -Al2 O3 固体超强酸 ,并采用低温陈化和添加稀土La对其制备方法进行改进 .通过样品催化正丁烷异构化反应考察了该固体超强酸中nZr和nAl的最佳配比为 1∶2 .该法制备的样品的IR显示 ,在 1393cm-1处的吸收峰强度较常温陈化样品大大增加 .XRD分析表明 ,低温陈化和加入稀土添加剂的样品在6 5 0℃焙烧温度下 ,出现了亚稳态的ZrO2 四方晶相的晶体是表面酸性和催化活性增加的微观原因 .样品催化合成八乙酸蔗糖酯反应结果同样证明 ,在相同的时间内 ,低温陈化和添加稀土添加剂的样品具有较好的催化活性     

K2O·CaO·4B2O3·12H2O∶Nd3+的合成及发光性能

以CaCl2、K2B4O7和Nd2O3为原料,采用易于工业化、无污染的水溶液法反应合成碱-碱土金属硼酸盐K2O·CaO·4B2O3·12H2O∶Nd3+晶体,利用X射线衍射、红外光谱、扫描电镜、荧光分光度计等现代分析测试手段,对所合成晶体进行了分析和表征.结果表明,所制备的K2O·CaO·4B2O3·12H2O∶Nd3...     

陈化温度和Fe/Zr配比对SO42-/Fe2O3-ZrO2固体超强酸结构与性能的影响

用低温陈化法制备了SO42 -/Fe2 O3 ZrO2 (简称SFZ)固体超强酸催化剂 ,用红外光谱 (IR)和X光衍射(XRD)对其结构进行了表征 ,并考察了它对合成癸二酸二正丁酯的催化性能 .IR谱显示 ,低温陈化的SFZ样品在10 70cm-1处吸收峰远强于常温陈化样品 .XRD分析则显示 ,在焙烧温度为 6 5 0℃、Fe/Zr为 2∶1时 ,低温陈化的样品出现了亚稳态的ZrO2 四方晶相 .该样品在催化酯化反应中使产率达 90 %以上 ,高于常温陈化样品的 30 % .研究结果表明 :在其他条件不变时 ,低温陈化所出现的亚稳态的ZrO2 四方晶相是表面酸性和催化活性增加的微观原因     

六方单晶氮化铝薄膜的合成与紫光发光机理

利用无水三氯化铝与叠氮化钠在无溶剂的条件下直接反应,成功地合成出六方单晶氮化铝(h-AlN)薄膜.反应温度为450℃,有效反应时间为20 h.高分辨率透射电镜发现为薄膜形态；电子衍射和X射线衍射结果都表明,氮化铝薄膜为六方结构.光致发光实验显示,在可见光范围内有一较强的辐射峰,中心位于413 nm处,半高宽约为5 nm.同时,本文对六方单晶氮化铝薄膜的生长机理和光致发光机理也进行了讨论.     

钒(Ⅴ)-5-Br-PADAP-H2O2-吐温-80显色体系的研究与应用

研究了在非离子表面活性剂吐温 - 80存在下 ,钒 ( )与 2 - [(5 -溴 - 2 -吡啶 ) -偶氮 ]- 5 -二乙氨基苯酚 (5 -Br- PADAP)及 H2 O2 的显色反应。实验表明 :在 p H1.5— 4 .0范围内 ,钒 ( )与 5 - Br- PADAP、H2 O2 形成稳定的配合物 ,最大吸收峰位于 5 95 nm处 ,表观摩尔吸光系数为 6 .2× 10 4L· mol-1· cm-1,配合物组成比为钒 ( )∶ 5 - Br- PADAP∶ H2 O2 =1∶ 1∶ 1。钒含量在 0— 15μg/ 2 5 m L范围内服从比耳定律。该方法灵敏度较高 ,用于合成水样中钒的测定 ,结果令人满意。     

一个Schiff碱配体的镍和锌配合物的合成及晶体结构

合成了两个含邻甲氧基苯甲醛Schiff碱配体的单核过渡金属配合物:Ni (C15H13N2O3)2 (1)和Zn (C15H13N 2O3)2(2).采用元素分析和单晶X-射线衍射对制备的晶体进行了结构表征.结构分析表明,这两个配合物属于异质同晶,晶体属四方晶系,空间群为P41212,Z=4.镍原子和锌原子都形成了扭曲的八面体配位构型.配体的酚氧原子(O1和O1A)未与金属原子配位,而甲氧基的氧原子(O3和O3A)却与金属原子配位.     

钬铝石榴石晶场参数调整

利用比热实验值,对钬铝石榴石（Ho3Al5O12）晶体的晶场参数进行了调整,依此计算了Ho3Al5O12晶体的晶场能谱、Zeeman劈裂能级和波函数. 在外磁场H=0时,分别计算了Ho3Al5O12晶体的总比热、总熵随温度的变化,以及外磁场H=10kOe时该晶体倒数磁化率的温度关系,理论计算结果均与已有实验数据符合较好.该工作为进一步探究该晶体的其它性质奠定了必要的理论基础,对实际生产和科学研究中磁制冷材料的优化选取也具有一定的现实意义.     

Lu2Si2O7∶Ce纳米晶的溶胶-凝胶法合成和闪烁性能

采用溶胶-凝胶法制备了Lu2Si2O7∶Ce纳米晶,利用X射线衍射(XRD)、扫描电镜(SEM)、荧光光谱仪、X射线激发发射谱仪对制备的Lu2Si2O7∶Ce纳米晶的晶相结构、微观形貌和光学性能进行了表征。结果表明,溶胶-凝胶法制备的Lu2Si2O7∶Ce前驱体在煅烧温度为1000℃时开始晶化,晶粒尺寸随着煅烧温度的升高而变大,1200℃煅烧2 h后的晶体颗粒均匀,分散性最优,平均晶粒尺寸约为28.9 nm,呈近球形;Lu2Si2O7∶Ce纳米晶的紫外吸收谱存在峰位分别为304 nm和350 nm两个吸收峰,源自于Ce^3+离子的4f→5d跃迁;光致发射谱和X射线激发发射谱都表现为典型的非对称双峰结构,归属于Ce^3+离子的5d^1→2F5/2和5d^1→2F7/2跃迁,Ce^3+离子的最佳掺杂浓度约为1%;荧光衰减时间约为37.2 ns,可满足高时间分辨X射线探测需要。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.