基于垂直结构的有机光发射晶体管制备与性能研究

制备了一种有机垂直光发射晶体管, 兼具有机发光二极管的发光和晶体管的开关调节两个功能.其结构为一个有机发光单元垂直堆叠在一个电容单元上,两单元通过一个共有的源电极连在一起.当电容单元被充电时,积累在源电极的电荷能有效地调节源极与有机层之间的载流子注入势垒,从而达到控制源漏输出电流的大小,最终控制发光单元发光的强度.实验结果表明,器件可提供02 mA的输出电流,其大小可驱动发光单元发光,工作电压（开启电压）为6 V.这种垂直集成方案,实现了器件多功能化,为有机发光二极管有源矩阵驱动的实际应用提供了一种新的解决方法.     

基于相变原理模拟红色顶发射有机电致发光器件的出光性能

研究了有机发光器件(organic light emitting diodes, 简记为OLED)半透明电极上形成的反射相移对OLED光谱产生调制现象.以红色微腔结构顶发射OLED(top emitting OLED,TOLED)为例,基于微腔理论和传输矩阵理论建立物理模型,采用计算机数值模拟方法,得出结果表明器件发光光谱的调制作用不只局限于有机层厚度,也和反射相移有关.通过改变覆盖到顶电极表面的有机层厚度的简单方法,可以实现对顶电极反射相移的调节,从而改变TOLED光学性能.这一结果为进一步改善器件的性 关键词： 反射相移模拟 红色微腔 顶发射有机发光     

莱纳(发光、接收光器件)

莱纳的概况 “LANER”(莱纳)是一种具有开关和发光两种性能的光半导体器件。这个单一的器件,同时具有接收光和发光的机能。它不但具有非线性特性(或负阻特性)控制机能,同时还能用可见光、红外线或同时用这两种光的波长来驱动控制。莱纳不仅可以在常温下工作,并且还可用莱纳中发光二极管的输出光来驱动器件本身。因此,实现了所说的“光的互相作用”。     

基于NPB的垂直构型有机发光晶体管的光电特性研究

通过将有机空穴阻挡材料BCP薄层插入垂直构型有机发光晶体管器件ITO/NPB（40nm）/Al（30nm）/NPB（20nm）/Alq₃（55nm）/Al中的不同位置对器件光电特性的影响来研究器件漏电流较大的原因以及器件中具体的载流子过程.充分证明了栅极注入的空穴对沟道中的电流有贡献.进而通过用LiF薄层修饰漏极来增强电子的注入并减小漏电流,得到了相对稳定的发光晶体管器件,其发光强度有很大提高并可很好地由栅极电压来进行调控.更换发光材料层容易得到不同颜色的发光晶体管. 关键词： 垂直构型有机发光晶体管（VOLET） 静电感应晶体管（SIT） N')" href="#">NPB （N N′-diphenyl-N')" href="#">N′-diphenyl-N N′-bis（1-naphtyl）-1')" href="#">N′-bis（1-naphtyl）-1 1′-biphenyl-4     

微腔面发射器件外量子效率研究

结合微腔面发射器件辐射/发光亮度的空间分布以及相对光谱功率分布给出了器件外量子效率的计算模型. 该模型可以计算工作于不同波段的微腔面发射器件的外量子效率,如红外波段的垂直腔面发射激光器,可见光波段的微腔有机发光二极管和谐振腔发光二极管以及太赫兹波段的平面微腔结构等. 制备了结构为玻璃/DBR /ITO /NPB /Alq ∶C545T/Alq/LiF/Al的微腔有机电致发光器件,测试其不同观察角度下器件的发光亮度以及发光光谱. 当电流密度和发光亮度分别为14 A/m²和100 cd/ 关键词： 外量子效率 平面微腔器件 辐射/发光亮度空间分布     

微电流高效率650nm谐振腔发光二极管

基于微腔理论和薄膜光学传输矩阵模型,设计并制备了孔径不同的谐振腔发光二极管.通过对外延结构的设计和对器件的制备与测试,详细研究了微腔结构、腔谱失谐以及有效辐射面积对器件发光效率、峰值波长和半波全宽等性能的影响,最终降低了器件的启亮电流并且提升了器件的外量子效率.制备的器件能够在100μA偏置电流下产生肉眼清晰可见的微瓦级光强,在1mA电流下达到0.16mW的光功率和7%的外量子效率.器件的峰值波长为650nm,并且在0.1~7mA范围内不随电流改变而发生变化.远场分布为均匀对称的圆形光斑,水平和竖直发散角分别为46°和48°.与普通发光二极管相比,该器件具有更高的发光效率和更好的单色性、方向性、波长稳定性,研究成果为实现微小电流驱动的高亮度发光器件提供了基础元件,并为谐振腔发光二极管在微电流下的光电特性研究提供参考与借鉴.     

基于垂直腔的通信波段短脉冲源

基于垂直微腔的光器件为自由空间与光纤中传播的光信号提供了简易的接入方式,极大地降低了器件封装的成本.垂直外腔表面发光激光器(也被称为半导体盘形激光器)结合了固态激光器和半导体激光器的优点,为开发新型紧凑的激光光源提供了新方法.对基于垂直腔的短脉冲源的研究现状进行一个简单的综述后,介绍了一些基于1.55 μm波长的亚皮秒光脉冲源的最新研究结果.这种脉冲源由InP基的垂直面发射激光器和GaAs基的半导体饱和吸收镜构成.     

电极肖特基接触对有机光敏晶体管性能的影响

有机光敏晶体管是一种在有机场效应管结构中引入光控“栅极”的新型光探测器件,其光灵敏度、光响应度性能参数与源/漏电极和有源层的接触情况关系密切。本文通过真空蒸发法分别制备了采用金电极和铝电极的单层并五苯及酞菁铜有机光敏晶体管。研究了它们在黑暗和光照条件下的输出及转移特性。结果表明,高迁移率的并五苯有源层更适合搭配接触特性较好的金电极,该器件具有和铝电极器件相同高水平的光灵敏度~3×104,但其光响应度是铝电极器件的13倍;而低迁移率的酞菁铜薄膜较适合搭配能够和有源层形成肖特基接触的铝电极,有利于抑制暗电流、增强激子解离效率、提高光电流,进一步使器件在获得和金电极器件同数量级光响应度的同时,其光灵敏度是金电极器件的102倍。本文对光照下电极/有源层肖特基接触的能带变化做了理论分析,总结归纳了有机光敏晶体管电极材料和有源层材料的初步筛选规律。     

垂直腔面发射激光器低温光电特性

垂直腔面发射激光器通常被用作常温下850 nm波段短波长短距离光互连领域的激光光源,多在室温下进行测试和使用.在低温环境下垂直腔面发射激光器工作状态的表征是本文的研究重点.我们表征了在不同温度下直流驱动垂直腔面发射激光器的发光光谱和10%占空比脉冲电流驱动垂直腔面发射激光器的发光光谱和功率-电流-电压曲线.通过测试激光器在室温和10 K温度下性能的变化,证明了现有的垂直腔面发射激光器在低温下仍能工作,激光器在10 K低温环境下仍可以作为光互连的光源使用,这一特点使得该激光器的应用范围可拓展至低温领域,预示着垂直腔面发射激光器在低温光互连系统中具有应用价值.     

光电耦合器的原理及应用

光电耦合器是一种光电结合的器件,它由两部分组成:输入端由发光器件组成;输出端由光接收器件组成.目前国内外的光电耦合器输入端大都使用发光二极管——砷化镓发光二极管,输出端大都使用硅光电二极管或硅光敏三极管,结构见图1.     

Organic light emitting transistors

Organic light emitting transistors which are vertically combined with the organic static induction transistor and organic light emitting diode are fabricated and the device characteristics depending on the structure of gate electrode are investigated. By optimizing the layer thickness and the size of slit-type Al gate electrode, high luminance modulation by low gate voltage as high as 1 V are obtained. The organic light emitting transistor described here is a suitable element for flexible sheet displays.     

Novel Field Emission Organic Light Emitting Diodes with Dynode

This work presents novel field emission organic light emitting diodes(FEOLEDs) with dynode,in which an organic EL light-emitting layer is used instead of an inorganic phosphor thin film in the field emission display(FED).The proposed FEOLEDs introduce field emission electrons into organic light emitting diodes(OLEDs),which exhibit a higher luminous efficiency than conventional OLED.The field emission electrons emitted from the carbon nanotubes(CNTs) cathode and to be amplified by impact the dynode in vacuum.These field emission electrons are injected into the multi-layer organic materials of OLED to increase the electron density.Additionally,the proposed FEOLED increase the luminance of OLED from 10 820 cd/m2 to 24 782 cd/m2 by raising the current density of OLED from an external electron source.The role of FEOLED is to add the quantity of electrons-holes pairs in OLED,which increase the exciton and further increase the luminous efficiency of OLED.Under the same operating current density,the FEOLED exhibits a higher luminous efficiency than that of OLED.     

利用电子传输层掺杂改善有机发光器件的效率

利用BCP掺杂到电子传输层Alq中,在掺杂层中阻挡了空穴的迁移,调整了空穴和电子的平衡,将激子有效地限制在发光层中发光,从而增加有机电致发光器件的效率.器件的最大电流效率在外加电压9 V时达到4.1 cd/A(掺杂浓度8%时),与一般未掺杂器件相比效率提高了2倍多.同时也减少空穴到达阴极,而减少发光淬灭.     

用于光通信的高速响应有机电致发光器件

采用直接光强调制的方法,建立了一种新型有机电致发光器件(OLED)的光电信号传输体系,研究了发光层掺杂、发光面积和预置电压对OLED响应速度的影响。结果发现:与发光层为单独的Alq3的器件相比较,掺杂rubrene的发光层的荧光寿命较短,响应较快;减小OLED的发光面积能提高OLED的响应速度,并在0.02 mm2的发光面积上实现了100 Mbit/s的信号传输速度;同时,预置直流电压也能改善OLED的响应速度。最后,提出将柔性OLED与聚合物波导及有机光电二极管结合,实现了一种全有机的柔性光电子体系。     

Enhanced performance of the OLED with plasma treated ITO and plasma polymerized thiophene buffer layer

In this work, indium-tin-oxide (ITO) electrode in organic light emitting device (OLED) was modified by using an O₂ plasma treatment and plasma polymerized thiophene buffer layers were inserted between ITO (anode) and organic layer in order to improve the hole injection efficiency. Furthermore, electron injection to cathode (Al) in the test OLED seemed to be improved due to introduction of quantum well in the cathode. The plasma-polymerized thiophene buffer layer on the O₂ plasma-treated transparent ITO electrode seemed to result in formation of a stable interface and consequently, reduction the hole mobility, which in turn caused enhanced recombination of hole and electron in the emitting layer. Compared with the test device without buffer layer, the turn-on voltage of the test device with the buffer layer was lowered by 1.0 V.     

ITO‐free top emitting organic light emitting diodes with enhanced light out‐coupling

Bottom emitting organic light emitting diodes (OLEDs) can suffer from lower external quantum efficiencies (EQE) due to inefficient out‐coupling of the generated light. Herein, it is demonstrated that the current efficiency and EQE of red, yellow, and blue fluorescent single layer polymer OLEDs is significantly enhanced when a MoO_x(5 nm)/Ag(10 nm)/MoO_x(40 nm) stack is used as the transparent anode in a top emitting OLED structure. A maximum current efficiency and EQE of 21.2 cd/A and 6.7%, respectively, was achieved for a yellow OLED, while a blue OLED achieved a maximum of 16.5 cd/A and 10.1%, respectively. The increase in light out‐coupling from the top‐emitting OLEDs led to increase in efficiency by a factor of up to 2.2 relative to the optimised bottom emitting devices, which is the best out‐coupling reported using solution processed polymers in a simple architecture and a significant step forward for their use in large area lighting and displays.     

Numerical and experimental studies of mixed-host organic light emitting diodes

Electrical characteristic and luminance of three mixed-host organic light emitting diodes (OLEDs): namely the uniformly mixed, step-wise graded and mixed, and continuously graded and mixed, were compared with the conventional hetero-junction OLED in both numerical and experimental studies. These mixed-host OLEDs were fabricated by a mixed-source thermal evaporation process, and half-cell devices were also fabricated to provide some input parameters for OLED simulations. The current efficiencies were largely influenced by their device structures and strongly agreed with the computed current balance factors. The improved mixed-host OLED performances can be discussed with aid from simulations, which include spatial distributions of electron and hole, carrier mobility, electric field profiles, the total recombination rates in the light emitting layer.     

Thin film hexagonal gold grids as transparent conducting electrodes in organic light emitting diodes

Indium Tin Oxide (ITO) coated glass is currently the preferred transparent conducting electrode (TCE) for organic light emitting diodes (OLEDs). However, ITO has its drawbacks, not least the scarcity of Indium, high processing temperatures, and inflexibility. A number of technologies have been put forward as replacements for ITO. In this paper, an OLED based on a gold grid TCE is demonstrated, the light emission through the grid is examined, and luminance and current measurements are reported. The gold grid has a sheet resistance of 15 Ω□⁻¹ and a light transmission of 63% at 550 nm, comparable to ITO, but with advantages in terms of processing conditions and cost. The gold grid OLED has a lower turn‐on voltage (7.7 V versus 9.8 V) and achieves a luminance of 100 cdm⁻² at a lower voltage (10.9 V versus 12.4 V) than the reference ITO OLED. We discuss the lower turn‐on voltage and the uniformity of the light output through the gold grid TCE and examine the conduction mechanisms in the ITO and gold grid TCE OLEDs.     

可弯曲式有机电玫发光器件的出光率

基于几何光学模型及其原理,推导出在不同弯曲情况下可弯曲式有机电致发光器件的出光率表达式,分析了器件出光率受基板曲率、厚度及有机层折射率的影响,并与平整有机电致发光器件的出光情况作了比较.结果表明:当器件向外弯曲时,出光率随着基板曲率与基板厚度的增大而增大,随着有机层折射率的增大而减小;当器件向内弯曲时,出光率随着基板曲率与基板厚度的增大而减小,随着有机层折射率的增大而减小.对于平整器件,其出光率随有机层折射率的增大而减小.     

Improved device reliability in organic light emitting devices by controlling the etching of indium zinc oxide anode

A controllable etching process for indium zinc oxide （IZO） films was developed by using a weak etchant of oxalic acid with a slow etching ratio. With controllable etching time and temperature, a patterned IZO electrode with smoothed surface morphology and slope edge was achieved. For the practical application in organic light emitting devices （OLEDs）, a sup- pression of the leak current in the current-voltage characteristics of OLEDs was observed. It resulted in a 1.6 times longer half lifetime in the IZO-based OLEDs compared to that using an indium tin oxide （ITO） anode etched by a conventional strong etchant of aqua regia.