Basic principles of pulsed-wind Doppler lidars with multitime coherence

A concept of multitime coherence (MTC) of optical beams is proposed. Two versions of fiber multiplicator topologies are presented, which are intended for the generation of multiple fiber pulses (MFP) possessing the MTC property. The fiber multiplicators may be a useful tool for Doppler laser anemometry of spatially separated scattering objects. Moreover, their use makes feasible the implementation of low-coherence wind Doppler lidars on the base of laser sources having a limited-time coherence (from one to a few tens of nanoseconds) and a high-velocity measurement resolution. Different lidar systems that feature a ring-fiber resonator (RFR) for reference wave generation are proposed. Two systems are also considered: (i) one based on a multimode fiber topology, which provides for the sensing ns-pulse generation and for the reference and probe wave multiplication; (ii) one based on a single-mode fiber topology, which provides for ns-pulse sensing and for the signal and reference wave multiplication. The concept of a low-coherence Doppler lidar system intended for atmospheric-sensing applications, which makes use of reference and signal waves possessing the MTC properties, is formulated for the first time.     

Low-coherence doppler lidar with multiple time coherence of reference and probe waves

The notion of multiple time coherence of optical beams is introduced and mathematically analyzed for the first time. Mathematical simulation is used to demonstrate the possibility of the generation of multiple fiber pulses (MFPs), which exhibit multiple time coherence, and the possibility of their application for the laser Doppler anemometry of spatially separated scattering objects (including the realization of wind coherent Doppler lidars). A method to obtain MFPs of a given duration with the means of fiber-optic commutation is proposed. The method is based on nanosecond lasers with a limited coherence length realized in a set of fiber topologies. The concept of a low-coherence Doppler lidar with the multiple time coherence of the reference and probe waves is formulated. The energy parameters of the lidar are mathematically simulated for one of the topologies of the MFP device.     

窄线宽纳秒脉冲光纤拉曼放大器的理论模型和数值分析

窄线宽纳秒脉冲光纤拉曼放大器在非线性频率变换、遥感探测和量子信息等领域有广泛的应用前景.综合考虑受激拉曼散射(stimulated Raman scattering,SRS)、受激布里渊散射(stimulated Brillouin scattering,SBS)、自相位调制(self-phase modulation)和交叉相位调制(cross-phase modulation)等非线性效应,建立了窄线宽纳秒脉冲光纤拉曼放大器的非线性动力学模型.仿真分析了放大器中脉冲激光的时频演化特性,对比研究了抽运脉冲宽度、光纤长度和信号光功率等因素对放大器性能的影响.研究发现,上述因素会影响放大器的SRS阈值、SBS阈值、输出激光线宽、激光转换效率等.例如,当脉冲宽度为800 ns时,SBS随着抽运功率的增加而发生,限制了激光功率的提升;减短抽运脉宽可以抑制SBS,但是输出激光的线宽易于展宽到数百MHz以上;增加光纤长度可以获得更低的SRS阈值和更高的转换效率,但是SBS效应和光谱展宽程度也随之增强.系统搭建中需要平衡各非线性效应,选择合适的系统参数.研究内容可以为窄线宽纳秒脉冲光纤拉曼放大器的设计搭建提供参考.     

基于频移反馈腔的全光纤射频调制脉冲激光研究

射频调制的脉冲激光是激光雷达探测领域内的一项重要研究内容.根据声光斩波器的强度和频率调制特性,设计了基于频移反馈腔的全光纤射频调制脉冲激光.理论上,建立了基于频移反馈腔的激光外差相干理论模型,并进行了数值仿真.根据理论模型,实验上严格控制频移反馈腔的长度和声光斩波器触发信号的周期,在100 MHz的射频信号驱动下,产生了脉冲宽度110 ns、重复频率约20 kHz的具有最高700 MHz射频调制的脉冲激光(脉内调制激光);同时微调斩波周期可以实现脉冲前沿或后沿的多样性射频调制.通过改变反馈腔内光纤放大器的输出功率实现了射频调制深度的连续可调,最高达到了0.67.     

紫外域多纵模高光谱分辨率激光雷达探测气溶胶的技术实现和系统仿真

多纵模高光谱分辨率激光雷达是一种新型的高光谱分辨率激光雷达.本文在研究典型高功率Nd:YAG脉冲激光器的多纵模模式及其在大气中传输的气溶胶米散射和瑞利散射光谱的基础上,设计紫外域多纵模高光谱分辨率激光雷达系统,采用窄带干涉滤光片滤除太阳背景光的影响,设计可调谐马赫-曾德尔干涉仪,分离提取多纵模激光回波中的气溶胶米散射和瑞利散射光谱,并利用马赫-曾德尔干涉仪双通道输出的互补性原理,精确反演气溶胶光学参量.系统仿真结果表明,所设计的紫外域多纵模高光谱分辨率激光雷达能够实现10 km高度内的气溶胶光学参量精细探测.     

Femtosecond fiber-feedback optical parametric oscillator

We demonstrate what is to our knowledge the first synchronously pumped high-gain optical parametric oscillator (OPO) with feedback through a single-mode fiber. This device generates 2.3-2.7 W of signal power in 700-900-fs pulses tunable in a wavelength range from 1429 to 1473 nm. The necessary high gain was obtained from a periodically poled LiTaO(3) crystal pumped with as much as 8.2 W of power at 1030 nm from a passively mode-locked Yb:YAG laser with 600-fs pulse duration and a 35-MHz repetition rate. The fiber-feedback OPO setup is compact because most of the resonator feedback path consists of a standard telecom fiber. Because of the high parametric gain, the fiber-feedback OPO is highly insensitive to intracavity losses. For the same reason, the synchronization of the cavity with the pump laser is not critical, so active stabilization of the cavity length is not required.     

Single-frequency polarized eye-safe all-fiber laser with peak power over kilowatt

An all-fiber, single-frequency, linearly polarized, high peak-power, pulsed laser at 1,540 nm for Doppler wind lidar is presented. This laser is composed of a single-frequency, narrow-linewidth external cavity diode laser, and multistage fiber amplifiers. A peak power of 1.08 kW and a pulse width of 500 ns at 10 kHz repetition rate are achieved, which is the highest peak power with a linewidth of 800 kHz in erbium-doped silica fiber to our knowledge. The beam quality of M ² < 1.3 and a polarization extinction ratio over 16 dB are obtained. This laser will be employed in a compact long-range coherent Doppler wind lidar.     

高功率全正色散锁模掺Yb3+双包层光纤飞秒激光器

以芯径为30 μm的掺Yb³⁺双包层光纤为增益介质, 利用非线性偏振旋转技术以及光栅-小孔结构组成的光谱滤波器提供有效的振幅调制, 实现了稳定的全正色散耗散孤子锁模运转. 激光器直接输出重复频率为76.6 MHz、平均功率达6.3 W的超短脉冲, 单脉冲能量可达82 nJ. 直接输出脉冲宽度为1.33 ps, 经腔外压缩后的宽度为377 fs. 通过调节光栅角度还实现了输出脉冲中心波长在1025—1078 nm范围内的调谐.     

Noiselike pulses with a broadband spectrum generated from an erbium-doped fiber laser

An erbium-doped fiber laser that produces a train of intense noiselike pulses with a broadband spectrum and a short coherence length is reported. The noiselike behavior was observed in the amplitude as well as in the phase of the pulses. The maximum spectral width obtained was 44 nm. The high intensity and the short coherence length of the light were maintained even after propagation through a long dispersive fiber. A theoretical model indicates that this mode of operation can be explained by the internal birefringence of the laser cavity combined with a nonlinear transmission element and the gain response of the fiber amplifier.     

Pulse-to-pulse coherent beat note generated by a passively Q-switched two-frequency laser

We demonstrate experimentally the pulse-to-pulse coherence of the beat note produced by a dual-polarization passively Q-switched Nd:YAG laser subjected to a frequency-shifted, polarization-rotated, optical feedback. The reinjection of one laser eigenstate into the other eigenstate ensures the phase-locking of the beat note against an external acoustic reference wave at the onset of each pulse, circumventing the intrinsic memory loss of the optical phase between successive pulses. It opens the possibility to generate optically a coherent pulsed beat note in the radio-frequency range with a subhertz linewidth, i.e., over thousands of pulses. An application to lidar radar is discussed.     

Weak laser pulse signal amplification based on a fiber Brillouin amplifier

We propose a high-gain and frequency-selective amplifier for a weak optical signal based on stimulated Brillouin scattering in a single mode fiber. To be able to satisfy the needs of high gain and high signal-to-noise ratio laser pulse amplification, different fiber lengths and core diameters are used to fulfill this experiment. In the experiment, a 430 nW(peak power) pulsed signal is amplified by 70 dB with a signal-to-noise ratio of 14 dB. The small size, high gain, low cost, and low noise of the fiber Brillouin amplifier make it a promising weak signal amplification method for practical applications such as lidar.     

全光纤多种子激光脉冲产生系统

报道一种可精确同步输出宽带啁啾脉冲、纳秒级整形脉冲以及窄带光参量啁啾放大抽运脉冲的全光纤多种子激光脉冲产生系统.采用掺镱光纤锁模激光器和掺镱单纵模光纤振荡器作为系统的光源,将掺镱光纤锁模激光器输出的超短脉冲分束啁啾展宽至0.9ns后,一路进行放大产生10μJ量级的宽带啁啾脉冲为高能拍瓦激光器系统提供种子光脉冲,另一路通过1.2nm滤波产生140ps的基元脉冲,通过光纤堆积器产生可编程整形的2.3ns脉冲,再经过放大达到10μJ量级,提供任意整形的压缩脉冲.同时,将部分掺镱光纤锁模激光器输出的超短脉冲进行光电转换并锁相后,产生与锁模超短脉冲高精度同步的电脉冲用于触发幅度调制器,将掺镱单纵模光纤振荡器输出的连续光削波放大,产生光参量啁啾放大抽运脉冲.该系统能够根据物理实验的需要,非常灵活地在输出各种脉冲之间做出选择.     

氧化石墨烯被动锁模掺镱光纤激光器多脉冲现象的实验研究

利用氧化石墨烯作为可饱和吸收体,在被动锁模全正常色散掺镱光纤激光器中研究了多脉冲的现象,在同一抽运功率不同偏振态下,实验获得了矩形脉冲谐波锁模、耗散孤子谐波锁模、准谐波锁模,脉冲峰值周期性调制,脉冲簇、脉冲束、混沌多重脉冲的多脉冲现象,插入激光腔内的2nm窄带滤波器具有限制增益带宽、对脉冲塑形、诱导多脉冲产生的作用,调节偏振控制器相当于改变腔内增益,是实现不同类型多脉冲现象的主要原因,本实验研究有利于加深对多脉冲动力学行为在正常色散区域氧化石墨烯锁模掺镱光纤激光器中的理解。     

利用单模光纤中SBS效应进行被动调Q的掺铒光纤激光器研究

分析了利用光纤中的受激布里渊散射(SBS)相位共轭效应进行激光腔内调Q,产生ns量级脉冲激光的原理,并对利用该效应产生的激光脉冲波形和脉冲形成过程进行了数值模拟,得到的脉冲波形与SBS相位共轭反射率随时间变化曲线基本一致,表明利用光纤中的SBS相位共轭作用调Q具有可行性。据此,对采用单模光纤(SMF)作为SBS池的掺Er3＋调Q光纤激光器进行实验研究,当单模光纤长度为1.5 m时,在45 mW的抽运光功率下得到脉宽约2.6 ns,脉冲周期58.23 ns,平均功率7.35 mW的激光脉冲。进一步的研究表明：激光器中相位共轭镜的形成与SBS介质长度有关,SBS介质过长,斯托克斯线之间无固定的相位关系,不能形成相干叠加,SBS相位共轭腔不能形成; SBS介质过短,腔内正交偏振模光子寿命的改变使脉冲出现双峰现象。脉冲形成后其属性只与SBS动态属性有关。     

用于激光聚变驱动器的全光纤、全固化光脉冲产生系统

报道一种全固化、全光纤的用于高功率激光驱动的惯性约束聚变驱动器的光脉冲产生系统,采用单纵模振荡器输出连续激光信号,经过相位调制器和振幅调制器,得到一个时间波形上已整形且具有一定带宽(约0.1 nm)的激光脉冲,经光纤放大器放大并经光纤分束器分束后同时输出四路激光脉冲,各路激光脉冲先通过时间同步调整单元精确控制时间同步关系后,经可编程光纤衰减器调节各路之间的功率平衡后再通过光纤放大器做进一步放大并通过150 m光纤传输输出至预放系统.该光纤系统可输出0.3—20 ns、带宽0.1 nm、能量数纳焦的几乎任意 关键词： 激光聚变驱动器 前端 光纤激光系统     

基于耗散孤子种子的啁啾脉冲光纤放大系统输出特性

以不同滤波器带宽下获得的全正色散光纤激光器耗散孤子作为啁啾脉冲放大(CPA)系统的种子脉冲, 研究了光栅对和光纤展宽器CPA系统输出脉冲的可压缩性. 结果表明, 对于大能量耗散孤子种子脉冲, 当CPA系统采用正色散光纤展宽器时, 光纤群速色散与自相位调制之间的相互作用不仅可抑制耗散孤子脉冲光谱调制的影响, 还可使脉冲在光纤展宽器中自相似演化, 从而可提高CPA输出脉冲的可压缩性. 通过优化光纤展宽器长度, 对于耗散孤子种子源, 采用光纤展宽器的CPA系统输出脉冲可压缩性与主脉冲所占脉冲总能量之比均优于采用光栅对展宽器时的情况.     

利用双光子吸收效应测量激光脉冲的相干时间

研究了利用反向泵浦－探测双光子吸收材料的方法来测量脉冲激光的相干时间，并测量量了２３ｐｓ，５３２ｎｍ Ｎｄ：ＹＡＧ激光脉冲的相干时间。实验和理论分析表明，光束相干作用增加了双光子吸收，利用此方法可测量其它脉宽激光的相干时间。     

主动锁模光纤激光器的孤子理论分析

系统考虑了光纤激光器腔构参数与锁模脉冲参数的制约关系,建立了完整形式的振幅调制主动锁模光纤激光器的稳态方程;据此方程分析了主动锁模光纤激光器腔参数对锁模孤子脉冲参数的影响;分析了无啁啾孤子脉冲形成条件。     

高重复频率飞秒掺镱光纤放大器

 数值分析了掺镱单模光纤放大器的最佳增益光纤长度，并在实验上对掺镱单模光纤放大器和光栅对压缩器进行了研究。以最大平均输出功率为7 mW、重复频率为25.4 MHz、脉宽为56 ps的被动锁模环形腔掺镱光纤激光器作为种子脉冲，用250 mW的976 nm单模半导体激光器分别泵浦3种不同长度的掺镱单模光纤，对种子光进行放大，并用光栅对压缩器对放大后的脉冲在不同光栅距离上进行了压缩实验研究。当掺镱单模光纤长度为1.2 m时得到了较好的放大效果，种子脉冲被放大到140 mW，相应的增益为13 dB，放大后的单脉冲能量为5.5 nJ。在光栅距离为14.1 cm时获得了最短440 fs的脉冲，压缩后的功率为43 mW，相应的峰值功率为3.8 kW。     

基于光纤中SBS相位共轭的自调Q光纤激光器

分析了利用光纤中的受激布里渊散射(stimulated Brillouin scattering,SBS)相位共轭效应进行激光腔内调Q,产生ns量级脉冲激光的原理,并对利用该效应产生的激光脉冲波形和脉冲形成过程进行了数值模拟,得到的脉冲波形与SBS相位共轭反射率随时间变化曲线基本一致,表明利用光纤中的SBS相位共轭作用调Q具有可行性.据此,对采用单模光纤(single-mode fiber,SMF)作为SBS池的Er³⁺掺杂调Q光纤激光器进行实验研究.当单模光纤长度为1.5 m时,在45 mW的光抽运功率下得到脉宽约2.6ns,脉冲周期58.23ns,平均功率7.35mW的激光脉冲.进一步的研究表明:激光器中相位共轭镜的形成与SBS介质长度有关,SBS介质过长,斯托克斯线之间无固定的相位关系,不能形成相干叠加,SBS相位共轭腔不能形成;SBS介质过短,腔内正交偏振模光子寿命的改变使脉冲出现双峰现象.脉冲形成后其属性只与SBS动态属性有关.