Determining the sum of flexoelectric coefficients in nematic liquid crystals by the capacitance method

A detailed theoretical analysis of determining the sum of flexoelectric coefficients in nematic liquid crystals using the capacitance method is given. In the strong anchoring parallel aligned nematic （PAN） and hybrid aligned nematic （HAN） cells, the dependences of the capacitance on the sum of flexoelectric coefficients and the applied voltage are obtained by numerical simulations, and the distributions of the director and the electric potential for different applied voltages and flexoelectric coefficients are also given. Based on this theoretical analysis, we propose an experimental design for measuring the capacitance of a liquid crystal cell using the improved precision LCR meter E4980A （Agilent）. Through comparing the experimental data with the simulated results, the sum of flexoeletric coefficients can be determined.     

Two-Dimensional Spatial Solitons in Nematic Liquid Crystals

We study the propagation of spatial solitons in nematic liquid crystals, using the self-similar method. Analytical solutions in the form of self-similar solitons are obtained exactly. We confirm the stability of these solutions by direct numerical simulation, and find that the stable spatial solitons can exist in various forms, such as Oaussian solitons, radially symmetric solitons, multipole solitons, and soliton vortices.     

Measurement of neutron cross sections and resonance parameters of ^169Tm below 100 eV

The neutron total cross-sections of thulium （^169Tm） were measured in the neutron energy region from 0.01 eV to 100 eV by using the time-of-flight method at the Pohang Neutron Facility, which consists of an electron linac, a water-cooled tantalum target with a water moderator, and a 12 m time of flight path, Two thulium plates with different thicknesses were used for the neutron transmission measurement. The background level was determined by using a notch-filter of Co, In, and Cd sheets. The present measurement was compared with the previous ones, and a new set of resonance parameters of ^169Tm isotope was obtained from the transmission rate by using the SAMMY code, with a comparison with the recommended parameters by Mughabghab.     

Energy calibration of a BC501A liquid scintillator using a γ-γ coincidence technique

An accurate energy calibration of a BC501A liquid scintillator by means of Compton scattering of γ-rays is described.The energy resolution and the position of the Compton edge have been precisely determined using a γ-γ coincidence technique and fitting the coincidence spectrum with a Gaussian function superimposed on a quadratic polynomial for the background.The position of the Compton edge relative to the position of the maximum and the half height of the distribution in dependence on the relevant energy resolution is discussed in detail.The results indicate that the maximum energy of the recoil Compton electron does not occur at the half height distribution but at 0.90±0.05 of the maximum height in the energy range considered.The energy resolution varies from 15.6% to 8.02% for electrons in the energy region from 0.5 MeV to 3 MeV.     

染料掺杂聚合物分散胆甾相液晶薄膜激光特性研究

采用激光染料DCM、向列相液晶TEB30A、手性剂S-811、聚乙烯醇(PVA), 通过微胶囊法制备了聚合物分散胆甾相液晶薄膜, 测量激光辐射谱, 研究了其激光辐射机理和温度调谐特性. 利用正交偏光显微镜观察器件织构, 看到液晶微滴分散均匀, 尺寸较大, 约为80 μm, 并且微滴中液晶分子呈现平面态排列织构. 以532 nm的Nd:YAG固体激光器作为抽运源, 测得在634.5 nm和680.2 nm波长处出现了尖锐的激光辐射峰, 线宽分别约为0.25 nm, 0.29 nm. 并与染料掺杂胆甾相液晶激光器件进行比较. 升高器件温度, 其输出激光波长蓝移, 获得666.7 nm至643.9 nm共22.8 nm的调谐范围. 由实验结果分析得出, 激光辐射机理为光子禁带末端激光, 出射波长分别对应光子禁带的两个边沿.     

Electro-optical properties cholesteric liquid of polymer stabilized crystal film＊

Liquid crystals （LCs） and polymers are extensively used in various electro-optical applications. In this paper, normal mode polymer stabilized cholesteric LC film is prepared and studied. The effects of chiral dopant and monomer concentrations on the electro-optical properties, such as contrast ratio, driving voltage, hysteresis width and response time, are investigated. The reasons of electro-optical properties influenced by the concentrations of the materials are discussed. Through the proper material recipe, the electro-optical properties of polymer stabilized cholesteric LC film can be optimized.     

α-decay half-lives of superheavy nuclei and general predictions

The generalized liquid drop model （GLDM） and the cluster model have been employed to calculate the α-decay half-lives of superheavy nuclei （SHN） using the experimental α-decay Q values. The results of the cluster model are slightly poorer than those from the GLDM if experimental Q values are used. The prediction powers of these two models with theoretical Q values from Audi et al. （QAudi） and Muntian et al. （QM） have been tested to find that the cluster model with QAudi and QM could provide reliable results for Z 〉 112 but the GLDM with QAudi for Z 112. The half-lives of some still unknown nuclei are predicted by these two models and these results may be useful for future experimental assignment and identification.     

Critical size of iron nanoparticles on liquid substrates

We study the iron atomic aggregates deposited on silicone oil surfaces by using atomic force microscopy.The aggregates are composed of disk-shaped nanoparticles with the mean diameterΦc≈31.7 nm and height Hc≈4.5 nm,which are nearly independent of the nominal film thickness.The experiment shows that a material condensation process must occur in the nanoparticles during the growth period.The anomalous phenomenon is explained.     

Study on gamma response function of E J301 organic liquid scintillator with GEANT4 and FLUKA

The gamma response function is required for energy calibration of EJ301 （5 cm in diameter and 20 cm in height） organic liquid scintillator detector by means of gamma sources. The GEANT4 and FLUKA Monte Carlo simulation packages were used to simulate the response function of the detector for standard 22Na, 60Co, 137Cs gamma sources. The simulated results showed a good agreement with experimental data by incorporating the energy resolution function to simulation codes. The energy resolution and the position of the maximum Compton electron energy were obtained by comparing measured light output distribution with simulated one. The energy resolution of the detector varied from 21.2% to 12.4% for electrons in the energy region from 0.341 MeV to 1.12 MeV. The accurate position of the maximum Compton electron energy was determined at the position 81% of maximum height of Compton edges distribution. In addition, the relation of the electron energy calibration and the effective neutron detection thresholds were described in detail. The present results indicated that both packages were suited for studying the gamma response function of EJ301 detector.     

Oxygen quenching in a LAB based liquid scintillator and the nitrogen bubbling model

The oxygen quenching effect in a Linear Alkl Benzene （LAB） based liquid scintillator （LAB as the solvent, 3 g/L 2, 5 diphe-nyloxazole （PPO） as the fluor and 15 mg/L p-bis-（o-methylstyryl）-benzene （bis-MSB） as the h-shifter） is studied by measuring the light yield as a function of the nitrogen bubbling time. It is shown that the light yield of the fully purged liquid scintillator is increased by 11% at room temperature and the room atmospheric pressure. A simple nitrogen bubbling model is proposed to describe the relationship between the relative light yield （oxygen quenching factor） and the bubbling time.     

Gound State Properties of Nuclei in ^295118 α-Decay Chain

The properties of nuclei belonging to the α-decay chain of superheavy element ^295118 have been studied in the framework of axially deformed relativistic mean field （RMF） theory with the parameter set of NL-Z2 in the blocked BCS approximation. Some ground state properties such as binding energies, deformations, and α-decay energies Qα have been obtained and agree well with those from finite-range droplet model （FRDM）. The single-particle spectra of nuclei in ^295118 α-decay chain show that the shell gaps present obviously nucleon number dependence. The root-mean-square （rms） radii of proton, neutron and matter distributions change slowly from ^283112 to ^295118 but dramatically from ^279110 to ^283112, which may be due to the subshell closure at Z = 110 in ^279110. The α-decay half-lives in 295118 decay chain are evaluated by employing the cluster model and the generalized liquid drop model （GLDM）, and the overall agreement is found when they are compared with the known experimental data. The α-decay lifetimes obtained from the cluster model are slightly larger than those of GLDM ones. Finally, we predict the α-decay half-lives of Z=118, 116, 114, 112 isotopes using the cluster model and GLDM, which also indicate these two models can corroborate each other in studies on superheavy nuclei. The results from GLDM are always lower than those obtained from the cluster model.     

Exploring FeSe-based superconductors by liquid ammonia method

Our recent progress on the preparation of a series of new FeSe-based superconductors and the clarification of SC phases in potassium-intercalated iron selenides are reviewed here. By the liquid ammonia method, metals Li, Na, Ca, Sr, Ba, Eu, and Yb are intercalated in between FeSe layers and form superconductors with transition temperatures of 30 K～46 K, which cannot be obtained by high-temperature routes. In the potassium-intercalated iron selenides, we demonstrate that at least two SC phases exist, K x Fe 2 Se 2 (NH 3 ) y (x ≈ 0.3 and 0.6), determined mainly by the concentration of potassium. NH 3 has little, if any, effect on superconductivity, but plays an important role in stabilizing the structures. All these results provide a new starting point for studying the intrinsic properties of this family of superconductors, especially for their particular electronic structures.     

Measurement of the friction coefficient of a fluctuating contact line using an AFM-based dual-mode mechanical resonator

A dual-mode mechanical resonator using an atomic force microscope （AFM） as a force sensor is developed. The resonator consists of a long vertical glass fiber with one end glued onto a rectangular cantilever beam and the other end immersed through a liquid-air interface. By measuring the resonant spectrum of the modified AFM cantilever, one is able to accurately determine the longitudinal friction coefficient ξv along the fiber axis associated with the vertical oscillation of the hanging fiber and the traversal friction coefficient ξh perpendicular to the fiber axis associated with the horizontal swing of the fiber around its joint with the cantilever. The technique is tested by measurement of the friction coefficient of a fluctuating （and slipping） contact line between the glass fiber and the liquid interface. The experiment verifies the theory and demonstrates its applications. The dual-mode mechanical resonator provides a powerful tool for the study of the contact line dynamics and the rheological property of anisotropic fluids.     

SU-8光栅结构中的液晶激光特性

设计制作了SU-8光栅结构的染料掺杂手性向列相液晶激光器件,在器件正面和侧面均实现了随机激光辐射。将激光染料PM597、手性剂S-811、向列性液晶TEB30A按一定比例均匀混合,注入反平行摩擦处理的液晶盒中,器件的下基板通过光掩模法刻蚀出周期为15μm的光栅。利用532 nm的Nd∶YAG固体脉冲激光器作为泵浦源,器件的侧面既在580~590 nm范围内出现了多个离散分立的随机激光辐射峰,FWHM约0.19 nm,又在579~585 nm范围内出现独立的两个激光辐射峰,FWHM约0.19 nm;在器件正面获得了584~590 nm范围的随机激光辐射谱,FWHM约0.17 nm。加热器件至61℃,液晶相变为各向同性态,器件侧面仍出现了波长约590.60 nm、FWHM约0.24 nm的激光辐射峰。分析得出,液晶盒中引入SU-8光栅结构后,光子同时在液晶分子间多重散射和SU-8光栅中布拉格反射获得反馈放大,两种机制相辅相成。器件侧面出现的独立激光辐射峰主要由SU-8光栅布拉格反射提供反馈放大形成,而器件侧面和正面的随机激光辐射峰主要由液晶分子间多重散射提供反馈放大形成。     

Measurement of the response function and the detection effciency of an organic liquid scintillator for neutrons between 1 and 30 MeV

The light output function of a φ50.8 mm×50.8 mm BC501A scintillation detector was measured in the neutron energy region of 1 to 30 MeV by fitting the pulse height （PH） spectra for neutrons with the simulations from the NRESP code at the edge range. Using the new light output function, the neutron detection effciency was determined with two Monte-Carlo codes, NEFF and SCINFUL. The calculated effciency was corrected by comparing the simulated PH spectra with the measured ones. The determined effciency was verified at the near threshold region and normalized with a Proton-Recoil-Telescope （PRT） at the 8-14 MeV energy region.     

液晶双折射Δn的测量

描述了一种简便、精确测量液晶的双折射Δn 值的方法。种这方法既可以用于测量其分离波长的值,又可以测量其连续波长(紫外、可见光或红外光谱区)的函数值。该方法根据单色线偏振光在折射率各向异性媒质中传播时产生相位差这一原理,给出两种液晶材料 E7和 TEB30的测量结果。     

Development of the liquid level meters for the PandaX dark matter detector

The two-phase xenon detector is at the frontier of dark matter direct search. This kind of detector uses liquid xenon as the sensitive target and is operated in two-phase （liquid/gas） mode, where the liquid level needs to be monitored and controlled in sub-millimeter precision. In this paper, we present a detailed design and study of two kinds of level meters for the PandaX dark matter detector. The long level meter is used to monitor the overall liquid level while short level meters are used to monitor the inclination of the detector. These level meters are cylindrical capacitors that are custom-made from two concentric metal tubes. Their capacitance values are read out by a universal transducer interface chip and are recorded by the PandaX slow control system. We present the developments that lead to level meters with long-term stability and sub-millimeter precision. Fluctuations （standard deviations） of less than 0.02 mm for the short level meters and less than 0.2 mm for the long level meter were achieved during a few days of test operation.     

The stress field and energy of screw dislocation in smectic A liquid crystals and the mistakes of the classical solution

The mistakes in the classical solution of a screw dislocation in smectic A liquid crystals are pointed out. A serious problem with the well-known theory is pointed, which may be named de Gennes-Kleman-Pershan paradox and has existed for many decades in the scientific community of liquid crystal study. The correct solution is given in this paper by a simplest, elementary, and straight forward method. In connection with this, the stress field and energy of dislocation are discussed in detail. The present article provides the correct stress field and dislocation energy as well.     

包层泵浦的高功率掺铥光纤激光器

研究了一种输出功率高且光束质量好的包层泵浦的掺铥光纤激光器.当泵浦功率达到30 W时,该掺铥光纤激光器产生的最大输出功率是6.1 W,且波长在2 μm左右,斜率效率达到55.6%,产生激光的阈值是2.2 W.当输出功率为3.3 W时,测得光束质量M2X和M2Y分别为1.26和1.32.     

Enhancement of green emission by the codoping U . 3＋ A＋ （A - Li, Na, K） in Ca2 O3CI.Tb phosphor

Tb3＋-doped Ca2BO3C1 compounds with different charge compensation approaches are synthesized by a hightemperature solid-state reaction method, and the luminescent properties and Commission Internationale de l＇Eclairage （CIE） chromaticity coordinates are systematically characterized. Ca2BO3Cl：Tb3＋ can produce green emission under 376 nm radiation excitation. With codoped A＋ （A = Li, Na, K） as charge compensators, the relative emission intensities of Ca2BO3Cl：Tb3＋ are enhanced by about 1.61, 1.97, and 1.81 times compared with those of the direct charge balance, which is considered to be due to the effect of the difference in ion radius on the crystal field. The CIE chromaticity coordinates of Ca2BO3CI：Tb3＋, A＋ （A = Li, Na, K） are （0.335, 0.584）, （0.335, 0.585）, and （0.335, 0.585）, corresponding to the hues of green. Therefore, A＋ （A = Li, Na, K） may be the optimal charge compensator for Ca2BO3Cl：Tb3＋.