Application of Two-Dimensional Frenkel-Kontorova Model to Nanotribology

The dry friction force between two contacting surface layers is studied. The upper layer is arranged on a two-dimensional square lattice and driven by an external driving force. The lower layer is approximated by a two-dimensional periodic substrate potential. This model, usually called two-dimensional Frenkel-Kontorova model, is applied to study the friction forces in this paper. The behaviors of different substrate potential strongly affect the static friction force. It is found that the system has strong anisotropic character. The possibility to obtain superlubricity is suggested.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Status of KLOE-2

In a few months the KLOE-2 detector is expected to start data taking at the upgraded DAФNE φ-factory of INFN Laboratori Nazionali di Frascati. It aims to collect 25 fb^-1 at the φ（1020） peak, and about 5 fb^-1 in the energy region between 1 and 2.5 GeV. We review the status and physics program of the project.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

Perturbation of Symmetries and Mei Adiabatic Invariants of Nonholonomic Systems with Servoconstraints

The perturbation of symmetries and Mei adiabatic invariants of nonholonomic systems with servoconstraints are studied. The exact invariants in the form of Mei conserved quantities introduced by the Mei symmetry of nonholonomic systems with servoconstraints without perturbations are given. Based on the definition of higher-order adiabatic invariants of mechanical systems, the perturbation of Mei symmetries for nonholonomic .systems with servoconstraints under the action of small disturbance is investigated, and Mei adiabatic invatiants of the system are obtained. An example is given to illustrate the application of the results.     

Effect of high temperature band gap of GaN annealing on strain and nanoparticles

<正>Black-coloured GaN nanoparticles with an average grain size of 50 nm have been obtained by annealing GaN nanoparticles under flowing nitrogen at 1200℃for 30 min.XRD measurement result indicates an increase in the lattice parameter of the GaN nanoparticles annealed at 1200℃,and HRTEM image shows that the increase cannot be ascribed to other ions in the interstitial positions.If the as-synthesised GaN nanoparticles at 950℃are regarded as standard,the thermal expansion changes nonlinearly with temperature and is anisotropic;the expansion below 1000℃is smaller than that above 1000℃.This study provides an experimental demonstration for selecting the proper annealing temperature of GaN.In addition,a large blueshift in optical bandgap of the annealed GaN nanoparticles at 1200℃is observed,which can be ascribed to the dominant transitions from the C（Γ₇） with the peak energy at 3.532 eV.     

Growth of monodisperse nanospheres of MnFe_2O_4 with enhanced magnetic and optical properties

Highly dispersive nanospheres of MnFe204 are prepared by template free hydrothermal method. The nanospheres have 47.3-nm average diameter, narrow size distribution, and good crystallinity with average crystallite size about 22 nm. The reaction temperature strongly affects the morphology, and high temperature is found to be responsible for growth of uniform nanospheres. Raman spectroscopy reveals high purity of prepared nanospheres. High saturation magnetization （78.3 emu/g）, low coercivity （45 Oe, 10e = 79.5775 A.cm-1）, low remanence （5.32 emu/g）, and high anisotropy constant 2.84 × 10^4 J/m3 （10 times larger than bulk） are observed at room temperatures. The nearly snperparamagnetic behavior is ~ spin due to comparable size of nanospheres with superparamagnetic critical thameter Dcr spm The high value of Keff may be due to coupling between the pinned moment in the amorphous shell and the magnetic moment in the core of the nanospheres. The nanospheres show prominent optical absorption in the visible region, and the indirect band gap is estimated to be 0.98 eV from the transmission spectrum. The prepared Mn ferrite has potential applications in biomedicine and photocatalysis.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Influence of roughness on the detection of mechanical characteristics of low-k film by the surface acoustic waves

The surface acoustic wave （SAW） technique is a precise and nondestructive method to detect the mechanical charac- teristics of the thin low dielectric constant （low-k） film by matching the theoretical dispersion curve with the experimental dispersion curve. In this paper, the influence of sample roughness on the precision of SAW mechanical detection is inves- tigated in detail. Random roughness values at the surface of low-k film and at the interface between this low-k film and the substrate are obtained by the Monte Carlo method. The dispersive characteristic of SAW on the layered structure with rough surface and rough interface is modeled by numerical simulation of finite element method. The Young＇s moduli of the Black DiamondTM samples with different roughness values are determined by SAWs in the experiment. The results show that the influence of sample roughness is very small when the root-mean-square （RMS） of roughness is smaller than 50 nm and correlation length is smaller than 20 μm. This study indicates that the SAW technique is reliable and precise in the nondestructive mechanical detection for low-k films.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Knotted Picture of Unknown Quantum State in Process of Quantum Teleportation

This paper gives the knotted picture of the unknown quantum state in the process of quantum teleportation and the surgical knotted operations of the unitary operators operated on the teleported quantum state.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

Coordinated Control of Multi-Agent Systems with a Varying-Velocity Leader and Input Saturation

In this paper, we investigate a leader-following tracking problem for multi-agent systems with bounded inputs. We propose a distributed bounded protocol for each follower to track a leader whose states may not be completely measured. We theoretically prove that each agent can follow the leader with estimable track errors. Finally, some numerical simulations are presented to illustrate our theoretical results.     

Measurement of the response function and the detection effciency of an organic liquid scintillator for neutrons between 1 and 30 MeV

The light output function of a φ50.8 mm×50.8 mm BC501A scintillation detector was measured in the neutron energy region of 1 to 30 MeV by fitting the pulse height （PH） spectra for neutrons with the simulations from the NRESP code at the edge range. Using the new light output function, the neutron detection effciency was determined with two Monte-Carlo codes, NEFF and SCINFUL. The calculated effciency was corrected by comparing the simulated PH spectra with the measured ones. The determined effciency was verified at the near threshold region and normalized with a Proton-Recoil-Telescope （PRT） at the 8-14 MeV energy region.     

Uncoupled achromatic condition of a dog-leg system with the presence of RF cavities

To merge the beam from either of the two injectors to the main linac, a dog-leg system will be employed in the second Medium Energy Beam Transport （MEBT2） line of the China ADS driving accelerator. The achromatic condition has to be guaranteed to avoid beam center excursion against energy jitter. RF cavities were found to be indispensable to control the bunch length growth in the dog-leg system of MEBT2. The full uncoupling between transverse and longitudinal plane is desired to minimize the growth of projected rms emittances. The uncoupled achromatic condition of this dogleg system with the presence of RF bunching cavities will be deduced using the transfer matrices method. It is found that, to fulfill the uncoupling condition, the distance between the bunching cavities is uniquely determined by the maximum energy gain of the RF cavities. The theoretical analysis is verified by the simulation code TraceWin. The space charge effect on the uncoupled achromatic condition and the beam emittance growth will Mso be discussed.     

Study of RPC gas composition using Daya Bay RPCs

This study uses Daya Bay RPCs operating in streamer mode to investigate gas mixtures of at least 50% argon, at most 6% isobutane, and with small amounts of SF6. Isobutane is reduced to 2% without degradation of performance, and SF6 reduces the noise rate and current, as well as the signal size. This study provides quantitative relationships between basic RPC operating parameters and various gas compositions.     

Generation of Atomic Cluster State via Adiabatic Evolution of Dark Eigenstates

We propose a scheme to generate atomic cluster states of arbitrary configuration in the cavity quantum electrodynamics （QED） system. The process is achieved via adiabatic evolution of dark states, which only requires adiabatically increasing or decreasing Rabi frequencies of laser. Thus it allows the robust implementation of entanglement against certain types of errors. Our scheme is relatively decoherence-free in the sense that excited atomic states are never populated and excited cavity photon states can be made negligible in certain conditions.     

Study on Duality of Wave and Particle of Turbulence Using CML Models

A family of coupled map lattice （CML） models has been developed to simulate the evolutional mechanism of interactions of convection, diffusion, and dispersion in both weakly and strongly coupled cases. Not only coherent and turbulent properties as well as their relations, but also the transitional states between convection dominating, diffusion dominating and dispersion dominating are analyzed to demonstrate the essential characteristics of any state. Numerical results show that the models are capable of simulating both layered coupling and stochastic mechanism, and lead us to understand whether or not turbulence coherent structure is formed by modulation of wave packet. The duality of wave and particle characters of turbulence is illustrated in the numerical simulation; a sketch picture is given to explain the questions associated with the turbulent inverse cascade, which is the result of the mutual interactions among the physical factors of nonlinearity, dissipation and dispersion.