Large-scale synthesis of rutile SnO2 nanorods

A high yield of tin oxide (SnO₂) nanorods was obtained via annealing a nanoscale precursor in the molten salt flux and surfactant. X-ray diffraction, transmission electron microscopy, high-resolution transmission electron microscopy, selected area electron diffraction and infrared spectroscopy showed that the nanorods are composed of SnO₂ with rutile structure. The surfactant and temperature have a profound influence on the production of SnO₂ nanorods.     

SnO2 nanowires mixed nanodendrites for high ethanol sensor response

Mixed morphology of SnO₂ nanowires and nanodendrites was synthesized on the gold-coated alumina substrates by carbothermal reduction of SnO₂ in closed crucible. The products were characterized by scanning electron microscopy, x-ray diffractometer, and transmission electron microscopy. Results showed the SnO₂ nanowires and the SnO₂ nanodendrites branched out from the main nanowires. Both SnO₂ nanostructures were pure tetragonal rutile structure. The nanowires were grown in [101] and directions with the diameter of 50–150 nm and the length of a few 10 μm. The nanodendrites were about 100–300 nm in diameter. The growth mechanism of the SnO₂ nanostructures was also discussed. Characterization of ethanol gas sensor, based on the mixed morphology of the SnO₂ nanostructures, was carried out. The optimal temperature was about 360 °C and the sensor response was 120 for 1000 ppm of ethanol concentration.     

Substrate effects on the oxygen gas sensing properties of SnO2/TiO2 thin films

In this study, SnO₂/TiO₂ thin films are fabricated on SiO₂/Si and Corning glass 1737 substrates using a R.F. magnetron sputtering process. The gas sensing properties of these films under an oxygen atmosphere with and without UV irradiation are carefully examined. The surface structure, morphology, optical transmission characteristics, and chemical compositions of the films are analyzed by atomic force microscopy, scanning electron microscopy and PL spectrometry. It is found that the oxygen sensitivity of the films deposited on Corning glass 1737 substrates is significantly lower than that of the films grown on SiO₂/Si substrates. Therefore, the results suggest that SiO₂/Si is an appropriate substrate material for oxygen gas sensors fabricated using thin SnO₂/TiO₂ films.     

Study of the synthesis and Cl2 gas-sensing properties of nanometer HNO3-doped SnO2

We focused on the effects of the inorganic acid HNO₃ on the gas-sensing properties of nanometer SnO₂ and prepared the powders via a dissolution-pyrolysis method. Furthermore, the powders were characterized by means of X-ray diffraction (XRD), scanning electron microscope (SEM), field emission scanning electron microscopy (FESEM) and energy-dispersive X-ray spectra (EDS). Several aspects were surveyed, including the calcining temperature, concentration of nitric acid and the working temperature. The results showed that the gas response of 3 wt% HNO₃-doped SnO₂ powders (calcined at 500 °C) to 10 ppm Cl₂ reached 316.5, at the working temperature 175 °C. Compared with pure SnO₂, appropriate HNO₃ could increase the gas sensitivity to Cl₂ gas more significantly.     

Hydrothermal synthesis and structural characterization of (1−x)α-Fe2O3-xSnO2 nanoparticles

Structural and morphological characteristics of (1−x)α-Fe₂O₃-xSnO₂ (x=0.0-1.0) nanoparticles obtained under hydrothermal conditions have been investigated by X-ray diffraction (XRD), transmission Mössbauer spectroscopy, scanning and transmission electron microscopy as well as energy dispersive X-ray analysis. On the basis of the Rietveld structure refinements of the XRD spectra at low tin concentrations, it was found that Sn⁴⁺ ions partially substitute for Fe³⁺ at the octahedral sites and also occupy the interstitial octahedral sites which are vacant in α-Fe₂O₃ corundum structure. A phase separation of α-Fe₂O₃ and SnO₂ was observed for x≥0.4: the α-Fe₂O₃ structure containing tin decreases simultaneously with the increase of the SnO₂ phase containing substitutional iron ions. The mean particle dimension decreases from 70 to 6 nm, as the molar fraction x increases up to x=1.0. The estimated solubility limits in the nanoparticle system (1−x)α-Fe₂O₃-xSnO₂ synthesized under hydrothermal conditions are: x≤0.2 for Sn⁴⁺ in α-Fe₂O₃ and x≥0.7 for Fe³⁺ in SnO₂.     

Low-temperature CO gas sensors based on Au/SnO2 thick film

A study on the low-temperature CO gas sensors based on Au/SnO₂ thick film was reported. Au/SnO₂ powders were prepared by a deposition-precipitation method. Thick films were fabricated from Au/SnO₂ powders. X-ray diffraction (XRD), high-resolution transmission electron microscopy (HRTEM) and X-ray photoelectron spectroscopy (XPS) analyses were carried out for investigation of morphology and crystalline structure. Au/SnO₂ thick film sensors exhibited high sensitivity to CO gas at relatively low operating temperature (83-210 °C). We also reported the effect of the calcination temperature of Au/SnO₂ on the CO gas sensing behavior. The optimal calcination temperature of Au/SnO₂ was 300 °C.     

SnO2 / In2O3 one-dimensional nano-core-shell structures: Synthesis, characterization and photoluminescence properties

SnO₂/In₂O₃ one-dimensional nano-core-shell structures have been synthesized at 1350 ^°C by thermal evaporation of the mixture of metal Sn, Fe(NO₃)₃ powders and In particles. The as-synthesized products have been characterized by energy-dispersive X-ray spectroscopy, selected-area electron diffraction and high-resolution transmission electron microscopy. Microstructure characterization indicates the orientation relationship between core and shell is , . The formation mechanism of this nano-core-shell structure can be attributed to the cover of In₂O₃ on the surface of SnO₂ nanochains. The photoluminescence properties of the nano-core-shell structures have been measured. The PL spectrum shows some difference with the result from pure SnO₂ and In₂O₃ nanostructure that be deemed to relate to interface defects in SnO₂/In₂O₃ nano-core-shell structure.     

Excitation process and photoluminescence properties of Tb and Eu ions in SnO2 and in SnO2: Porous silicon hosts

Tin oxide (SnO₂)-layers-doped terbium and europium ions are elaborated by the sol-gel method on silicon substrates. After annealing at 500 °C, the transmission electron microscopy revealed a crystallization of tin oxide.The emission properties of rare-earth in SnO₂ are studied systematically against temperature annealing and Tb³⁺ concentration. The PL spectrum is optimal after annealing at 900 °C and the corresponding photoluminescence (PL) decay is nearly exponential, showing that the sample is homogenous and the PL process can be described by two levels system.The concentration effect shows a quenching of the PL intensity for Tb³⁺ concentration above 4%. From the investigation of the decay rate from the ⁷F₅ state within terbium concentration, we show that self-quenching is insured by dipole - dipole interaction. The evolutions of both PL intensity and PL lifetime versus temperature are studied. The PL intensity and PL lifetime are enhanced by deposing SnO₂:Tb³⁺ and SnO₂:Eu³⁺ in porous silicon. We show that an efficient excitation transfer from Si nanocrystallites to RE ions can occur.     

Growth mechanism and photoluminescence of the SnO2 nanotwists on thin film and the SnO2 short nanowires on nanorods

SnO2 nanotwists on thin film and SnO2 short nanowires on nanorods have been grown on single silicon substrates by using Au-Ag alloying catalyst assisted carbothermal evaporation of SnO2 and active carbon powders.The morphology and the structure of the prepared nanostructures are determined on the basis of field-emission scanning electron microscopy(FESEM),transmission electron microscopy(TEM),selected area electronic diffraction(SAED),high-resolution transmission electron microscopy(HRTEM),x-ray diffraction(XRD),Raman and photoluminescence(PL) spectra analysis.The new peaks at 356,450,and 489 nm in the measured PL spectra of two kinds of SnO2 nanostructures are observed,implying that more luminescence centres exist in these SnO2 nanostructures due to nanocrystals and defects.The growth mechanism of these nanostructures belongs to the vapour-liquid-solid(VLS) mechanism.     

Preparation and spectroscopic properties of Nb2O5 nanorods

Nb₂O₅ nanorods have been prepared using water/ethanol media. The samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-visible absorption and photoluminescence spectroscopy. The as-prepared Nb₂O₅ nanorods appeared to be single pseudohexagonal (TT-Nb₂O₅) phase. From the photoluminescence spectrum, two emission bands at 407 and 496 nm, respectively, were observed. The origin of the luminescence was discussed in detail.     

Fabrication of porous BaSnO3 hollow architectures using BaCO3@SnO2 core-shell nanorods as precursors

We present a strategy to synthesize porous BaSnO₃ hollow architectures with that were 150-300 nm in diameter and 1.5-5 μm in length using precursor of BaCO₃@SnO₂ nanorods prepared by hydrothermal treatment. BaCO₃@SnO₂ nanorods, consisting of a BaCO₃ core and a SnO₂ shell, could be used effectively for the solid-state synthesis of polycrystalline BaSnO₃ powder at 800 °C (lower than convention for BaCO₃ and SnO₂ mixtures). The core/shell structure of the precursor could play a role as a structural directing template for preparing BaSnO₃ hollow architectures during the calcination process. The X-ray diffractometer (XRD), scanning electron microscope (SEM), and transmission electron microscope (TEM) are employed to characterize the structures and morphologies. When applied to DSSC, the porous BaSnO₃ hollow architectures exhibit distinct photovoltaic effect.     

Field emission from patterned SnO2 nanostructures

A simple and reliable method has been developed for synthesizing finely patterned tin dioxide (SnO₂) nanostructure arrays on silicon substrates. A patterned Au catalyst film was prepared on the silicon wafer by radio frequency (RF) magnetron sputtering and photolithographic patterning processes. The patterned SnO₂ nanostructures arrays, a unit area is of ∼500 μm × 200 μm, were synthesized via vapor phase transport method. The surface morphology and composition of the as-synthesized SnO₂ nanostructures were characterized by means of scanning electron microscopy (SEM) and X-ray diffraction (XRD). The mechanism of formation of SnO₂ nanostructures was also discussed. The measurement of field emission (FE) revealed that the as-synthesized SnO₂ nanorods, nanowires and nanoparticles arrays have a lower turn-on field of 2.6, 3.2 and 3.9 V/μm, respectively, at the current density of 0.1 μA/cm². This approach must have a wide variety of applications such as fabrications of micro-optical components and micropatterned oxide thin films used in FE-based flat panel displays, sensor arrays and so on.     

One-step synthesis and electrochemical behavior of LiMnO2 and its composite from MnO2 in the presence of glucose

LiMnO₂ and 0.23Li₂MnO₃·0.77LiMnO₂ were prepared by a convenient one-step solid-state reaction from MnO₂ using glucose as organic carbon resource. The crystal structure and morphology of the as-prepared materials was examined by X-ray powder diffraction and field emission scanning electron microscopy, respectively. The ration of Li to Mn was determined by means of atomic absorption spectrometry and the Li/Mn molar ratio in the products was 1.23. The electrochemical properties were investigated by charge-discharge test and electrochemical impedance measurements. The prepared composite material presented an initial discharge capacity of 45 mAh g^-1 and a good cycling performance with reversible capacity of 218 mAh g^-1 after 30 cycles. On the basis of the experimental results, the discharge efficiency of this composite material more than 100% was also discussed.     

SnO2微纳米材料的合成及其生长机理研究

利用简单的化学气相沉积法,以Sn粉为源材料合成不同形貌的一维SnO₂纳米棒、纳米线和纳米花等纳米结构,并通过减小载气中的氧含量获得新颖的SnO₂亚微米环状结构.通过调节Sn粉的量和载气中的氧含量、升温速率等试验条件,有效实现SnO₂一维纳米结构的控制生长.采用扫描电子显微镜、能谱仪和X射线衍射仪表征产物形貌、成分和物相结构,并探讨了SnO₂微纳米材料的生长机理. 关键词： 2')" href="#">SnO₂ 纳米结构 亚微米环 生长机理     

One-step solvothermal preparation of TiO2/C composites and their visible-light photocatalytic activities

Preparation of anatase type titania nanoparticles and their carbon modification were synchronously achieved by the solvothermal method with glycerol as the carbon source. The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and diffuse reflectance spectra (DRS). It was found that the glycerol/ethanol ratio affected significantly the morphology and properties of TiO₂/C composites. The TiO₂/C composite which was obtained in the solution with the glycerol/ethanol ratio of 5/75, contained 1.2 mass% carbon and exhibited both superior adsorption capability and visible-light photocatalytic activity. Contrary to this, samples prepared in the solution with higher glycerol/ethanol ratio, exhibited lower photocatalytic activity similar to that of the titania without carbon modification. It was suggested that excess addition of glycerol might contribute to large amounts of carbonaceous species and severe aggregation of the as-prepared samples, and thus reduced the surface area. As a result, the adsorption capability and visible-light photocatalytic activity increased at first and then decreased with the increase of glycerol addition. Present study provided a facile one-step method to obtain TiO₂/C composites with a controllable carbon content and photocatalytic performance under mild temperature.     

纳米SnO2材料的穆斯堡尔谱研究

通过X射线衍射,透射电子显微镜和穆斯堡尔谱测量,确定了在本研究中用水热法制备的半导体SnO₂材料为纳米材料,实验给出该材料的结构特点和Sn原子核的超精细参量,并发现600℃时纳米的SnO₂会转变成晶态大颗粒的SnO₂。 关键词：     

Hydrothermal synthesis and optical characteristics of Eu in Zn2SnO4 nanocrystals

Zn₂SnO₄:Eu³⁺ nanocrystals were one-step synthesized by hydrothermal method for the first time. All the products were systematically characterized by powder X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), electron probe X-ray microanalyzer (EPMA), photoluminescence (PL) and photoluminescent excitation (PLE). The characteristic peak of Eu³⁺-doped in Zn₂SnO₄ nanocrystals was also detected. The luminescent properties of blank and Eu³⁺-doped Zn₂SnO₄ nanocrystals were reported.     

Large-scale synthesis of Ga2O3 nanoribbons by a two-step gas flow control

β-Ga₂O₃ nanoribbons have been prepared by a two-step gas flow control, involving adjusting the pressure inside the tube before and after the formation of the nanoribbons. In different temperature areas, separated nanoribbons and nanowires were obtained, which grew via solid–liquid–vapor–solid (SLVS) and vapor–liquid–solid (VLS) mechanisms, respectively. The samples obtained were characterized by means of scanning electron microscopy, transmission electron microscopy, micro-Raman scattering, and photoluminescence. It was found that Ga₂O₃ nanoribbons had a perfect monoclinic single-crystal structure with a [002] growth direction. The Ga₂O₃ nanoribbons give ultraviolet, cyan and green light emission at room temperature under excitation at 254 and 325 nm.     

Fabrication and transformation of dense SnO2 via laser ablation condensation

Dense SnO₂ nanocondensates with fluorite-type-related structures have been synthesized via severe heating-cooling under energetic Nd-YAG laser pulse irradiation of the Sn target in oxygen ambient. Transmission electron microscopic observations indicated that the fluorite type transformed in a martensitic manner into a baddeleyite-type structure with accompanied dislocations, twinning, commensurate shearing and shape change. The Pa3¯-modified fluorite-type structure was hardly observed possibly due to its transformation into α-PbO₂ type and then rutile-type structures in the dynamic process.     

Synthesis of coryphantha elephantidens-like SnO2 nanospheres and their gas sensing properties

In this work, coryphantha elephantidens-like SnO₂ with porous structures were prepared successfully by a simple hydrothermal route, through adjusting the temperature of hydrotherm. Its morphology was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and Brunauer–Emmett–Teller (BET). Compared to the regular nanospheres, the coryphantha elephantidens-like SnO₂ nanospheres had obviously higher gas-sensing response, owing to the special structure with large specific surface area (161.16 m² g^?1). It surprised us that the coryphantha elephantidens-like SnO₂ sensor could easily distinguish between ethanol and acetone, whose chemical property were similar. Moreover, it also exhibited wide measurement range, fast response speed (less than 10 s) and good repeatability at a low temperature (180 °C) to ethanol. The desirable specific surface area and pore volume were conducive to molecules adsorption and diffusion, which were believed to be the major cause of the improvement of gas sensing performance.