Scalable synthesis of Sb(III)Sb(V)O4 nanorods from Sb2O5 powder via solvothermal processing

Scalable Sb(III)Sb(V)O₄ nanorods from Sb₂O₅ powder were prepared using solvothermal route. XRD and HRTEM demonstrate that the nanorods are single-crystal orthorhombic-Sb₂O₄ phase with several micrometers long and 200-300 nm diameter size. XPS result further shows that the antimony cations in the nanorods are composed of three valence and five valence antimony ions. The emission of the nanorods appears around 450 nm wavelength. The formation mechanism of the Sb(III)Sb(V)O₄ nanorods was discussed in detail.     

Enhanced activity of mesoporous Nb2O5 for photocatalytic hydrogen production

The mesoporous Nb₂O₅ photocatalysts were synthesized via an evaporation-induced self-assembly (EISA) method. The mesoporous structure of the as-made samples was studied by small-angle X-ray diffraction, N₂ adsorption-desorption isothermal and transmission electron microscopy. The increase of the calcination temperature during the synthesis resulted in enhanced crystallization, but decreased mesoporosity of the samples. The later was found to have a crucial influence on the photocatalytic activity by bringing on decreased BET surface area and especially increscent pore wall thickness. The advantage of the mesoporous Nb₂O₅ was also proved by performing 20 times higher photocatalytic activity than a bulk Nb₂O₅ without any porosity. A model was given to describe the effect of mesoporosity on the transportation and recombination of carriers.     

Fabrication, morphology, and photoluminescence properties of GaN nanowires and nanorods by ammoniating Ga2O3/V films on Si(1 1 1)

GaN nanowires and nanorods have been successfully synthesized on Si(1 1 1) substrates by magnetron sputtering through ammoniating Ga₂O₃/V films at 900 °C in a quartz tube. X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and photoluminescence (PL) spectrum were carried out to characterize the structure, morphology, and photoluminescence properties of GaN sample. The results show that the GaN nanowires and nanorods with pure hexagonal wurtzite structure have good emission properties. The growth direction of nanostructures is perpendicular to the fringes of (1 0 1) plane. The growth mechanism is also briefly discussed.     

Ferroelectric properties of Bi3.25−x/3La0.75Ti3−xNbxO12 films prepared by pulsed laser deposition

Bi₄Ti₃O₁₂ (BiT), Bi_3.25La_0.75Ti₃O₁₂ (BLT), Bi_4−x/3Ti_3−xNb_xO₁₂ (BTN) and Bi_3.25−x/3La_0.75Ti_3−xNb_xO₁₂ (BLTN) thin films have been prepared by pulsed laser deposition. BTN and BLTN films exhibit a maximum in the remanent polarization P_r at a Nb content x=0.018. At this Nb content, the BLTN film has a P_r value (25 μC/cm²) that is much higher than that of BiT and a coercive field similar to that of BiT. The polarization of this BLTN film is fatigue-free up to 10⁹ switching cycles. The high fatigue resistance is mainly due to the substitution of Bi³⁺ ions by La³⁺ ions at the A site and the enhanced P_r arises largely from the replacement of Ti⁴⁺ ions by Nb⁵⁺ ions at the B site. The mechanisms behind the effects of the substitution at the two sites are discussed.     

Dielectric properties of SrBi2−xPrxNb2O9 ceramics (x=0, 0.04 and 0.2)

SrBi_2−xPr_xNb₂O₉ (x=0, 0.04 and 0.2) ceramics were prepared by a solid state reaction method. X-ray diffraction analysis indicated that single-phase layered perovskite structure ferroelectrics were obtained. A relaxor behavior of frequency dispersion was observed among Pr-doped SrBi₂Nb₂O₉. The degree of frequency dispersion ΔT increased from 0 for x=0-7 °C for x=0.2, and the extent of relaxor behavior γ increased from 0.94 for x=0-1.45 for x=0.2. The substitution of Pr ions for Bi³⁺ ions in the Bi₂O₂ layers resulted in a shift of the Curie point to lower temperatures and a decrease in remanent polarization. In addition, the coercive field 2E_c reduced from 110 kV/cm for an undoped specimen to 90 kV/cm for x=0.2.     

Domain structures in tetragonal Pb(Mg1/3Nb2/3)O3-PbTiO3 single crystals studied by piezoresponse force microscopy

The domain structures in (001) surface of Pb(Mg_1/3Nb_2/3)O₃-40% PbTiO₃ single crystals were investigated by piezoresponse force microscopy. Both micron-sized fingerprint 180° and parallel 90° domains were observed in the sample. Different sets of favourable {110} oriented domain patterns were found to meet, intersect or grow through each other. In addition, the piezoelectricity decreases sharply at the domain walls in 180° structures, but does not in the 90° domain structures.     

Novel ultraviolet photoluminescence of ZnO/ZnGa2O4 composite layers

ZnO/ZnGa₂O₄ composite layers were synthesized by simple thermal oxidation of ZnS substrates with gallium in the air. The continuous-wave and time-resolved photoluminescence measurements for the composites were performed at room temperature. It is found that the visible deep level emission from ZnO in ZnO/ZnGa₂O₄ composite layer was almost suppressed. In addition, the UV emission with long lifetime was also observed in comparison with that of pure ZnO layer without ZnGa₂O₄.     

Eu red long afterglow in Y2O2S:Ti, Eu phosphor through afterglow energy transfer

Eu,Ti co-doped Y₂O₂S:0.03Ti,0.03Eu phosphors and single Eu or Ti doped Y₂O₂S phosphors were prepared and their luminescent properties were investigated in detail by photoluminescence (PL) spectra, long afterglow spectra and thermoluminescence spectra measurements. The results showed that Y₂O₂S:Ti,Eu phosphors possess orange-red afterglow color with afterglow time above 5 h. The reddish afterglow color, which corresponds to a set of linear Eu³⁺ emissions at low-energy range (540-630 nm), was demonstrated to come from the energy transfer process from yellow Ti afterglow emissions, the proposed energy transfer mechanism may well explain the Eu³⁺ afterglow emission.     

Crystalline and photoluminescence characteristics of YVO4:Sm thin films grown by pulsed laser deposition under oxygen pressure

YVO₄:Sm³⁺ films were deposited on Al₂O₃ (0 0 0 1) substrates at various oxygen pressures changing from 13.3 to 46.6 Pa by using the pulsed laser deposition method. The crystallinity and surface morphology of these films were investigated by means of X-ray diffraction (XRD) and atomic force microscopy (AFM), respectively. The XRD pattern confirmed that YVO₄:Sm³⁺ film has zircon structure and the AFM study revealed that the films consist of homogeneous grains ranging from 100 to 400 nm. The room temperature photoluminescence (PL) spectra showed that the emitted radiation was dominated by a reddish-orange emission peak at 602 nm radiating from the transition of (⁴G_5/2→⁶H_7/2). The crystallinity, surface morphology, and photoluminescence spectra of thin-film phosphors were highly dependent on the deposition conditions, in particular, the substrate temperature. The surface roughness and photoluminescence intensity of these films showed similar behavior as a function of oxygen pressure.     

Maxwell-Wagner characterization of dielectric relaxation in Ni0.8Zn0.2Fe2O4/Sr0.5Ba0.5Nb2O6 composite

Dense composites were prepared through incorporating the dispersed Ni_0.8Zn_0.2Fe₂O₄ ferromagnetic particles into Sr_0.5Ba_0.5Nb₂O₆ ferroelectric matrix. Extrinsic dielectric relaxation and associated high permittivities of the materials are reported in the composites. We used an ideal equivalent circuit to explain electrical responses in impedance formalism. A Debye-like relaxation in the permittivity formalism was also found. Interestingly, real permittivity (ε′) of the sample containing 30% Ni_0.8Zn_0.2Fe₂O₄ shows obvious independence of the temperature at 100 kHz. Dielectric relaxation and high-ε′ properties of the composites are explained in terms of the Maxwell-Wagner (MW) polarization model.     

Magnetic properties of large-area one-dimensional WO2 and MoO2 nanorods

Large-area one-dimensional (1D) monoclinic WO₂ and MoO₂ nanorods in the space group P2₁/c were synthesized by reactive thermal evaporation. The as-synthesized 1D WO₂ and MoO₂ nanorods become soft magnetic materials at 10 K, implying that structural or magnetic transitions occur. There are large differences in saturation magnetization, the coercive field, and remanence between the 1D WO₂ and MoO₂ nanorods, although both 1D nanorods have a similar shape.     

Structural and optical properties of ZnO nanorods grown on MgxZn1−xO buffer layers

ZnO nanorod arrays were synthesized by chemical-liquid deposition techniques on Mg_xZn_1−xO (x = 0, 0.07 and 0.15) buffer layers. It is found that varying the Mg concentration could control the diameter, vertical alignment, crystallization, and density of the ZnO nanorods. The X-ray diffraction (XRD), transmission electron microscopy (TEM), and selected area electron diffraction (SAED) data show the ZnO nanorods prefer to grow in the (0 0 2) c-axis direction better with a larger Mg concentration. The photoluminescence (PL) spectra of ZnO nanorods exhibit that the ultraviolet (UV) emission becomes stronger and the defect emission becomes weaker by increasing the Mg concentration in Mg_xZn_1−xO buffer layers.     

Photocatalytic activity of Nb2O5/SrNb2O6 heterojunction on the degradation of methyl orange

The pure SrNb₂O₆ powders were prepared at 1400 °C by a conventional solid-state method and characterized by X-ray powder diffraction and UV-vis diffuse reflection spectrum. The powders of Nb₂O₅ and SrNb₂O₆ were ball-milled together and annealed to form the Nb₂O₅/SrNb₂O₆ composite. Photocatalytic activities of the composites were investigated on the degradation of methyl orange. The results show that the proportion of Nb₂O₅ to SrNb₂O₆ and the annealing temperature greatly influence the photocatalytic activities of the composites. The best photocatalytic activity occurs when the weight proportion of Nb₂O₅ to SrNb₂O₆ is 30% and the annealing temperature is 600 °C. The tremendously enhanced photocatalytic activity of the Nb₂O₅/SrNb₂O₆ composite compared to Nb₂O₅ or SrNb₂O₆ is ascribed to the heterojunction effect taking place at the interface between particles of Nb₂O₅ and SrNb₂O₆. The powders also show a higher photocatalytic activity than commercial anatase TiO₂.     

Electronic structure of AgNbO3 and NaNbO3 studied by X-ray photoelectron spectroscopy

The XPS examinations of the AgNbO₃ and NaNbO₃ single crystals and ceramics allowed estimate their average composition as Ag_1.1Nb_0.9O₃ and Na_1.2Nb_0.9O_2.9. The valence bands of the AgNbO₃ compound, formed mainly of the Nb 4d, Ag 4d and O 2p states, show an energy gap about 3 eV while for the NaNbO₃ compound consist of the O 2p states hybridized with the Nb 3d states and show an energy gap about 4 eV. The chemical shifts of these compounds suggest a mixed ionic and covalent character of the bonds. The broadening of the core level lines of AgNbO₃ suggests a stronger structural disorder in comparison with NaNbO₃ compound.     

Thickness-dependent surface morphology of La0.9Sr0.1MnO3 ultrathin films

La_0.9Sr_0.1MnO₃ (LSMO) ultrathin films with various thickness (in the range of 5-50 unit cells) are grown on (0 0 1) substrates of the single-crystal SrTi_0.99Nb_0.01O₃ by laser molecular-beam epitaxy (laser-MBE), and the surface morphology of these films were measured by scanning tunneling microscopy (STM). STM images of LSMO ultrathin film surface reveal that surface morphology becomes more flat with increasing film thickness. This study highlights the important effect of strain caused by the lattice mismatch between substrates and ultrathin films. And the results should be useful to the investigations on growing manganite perovskite materials.     

Facile synthesis of Nb2O5 nanorod array films and their electrochemical properties

Nb₂O₅ nanorod array films were synthesized by a facile hydrothermal process using niobium metal foil and NH₄F as precursors. The Nb₂O₅ nanorods stand on the niobium metal foil substrate and are less than 100 nm in diameter and about 1 μm in length. X-ray diffraction (XRD) and high resolution transmission electron microscopy (HRTEM) characterizations indicate that these nanorods have orthorhombic structure and grew longitudinally along 〈0 0 1〉 direction. The nanorod growth mechanism was discussed. Thermal annealing at a temperature below 500 °C did not change the microstructure of nanorods but improve the crystallinity. The Nb₂O₅ nanorod array films have been tested as cathode material for lithium battery, which showed a good specific capacity up to 380 mAh g⁻¹ even after 50 charge/discharge cycles.     

Microstructure and dielectric properties of (Ba0.6Sr0.4)TiO3 thin films grown on super smooth glazed-Al2O3 ceramics substrate

Modified substrates with nanometer scale smooth surface were obtained via coating a layer of CaO-Al₂O₃-SiO₂ (CaAlSi) high temperature glaze with proper additives on the rough-95% Al₂O₃ ceramics substrates. (Ba_0.6Sr_0.4)TiO₃ (BST) thin films were deposited on modified Al₂O₃ substrates by radio-frequency magnetron sputtering. The microstructure, dielectric, and insulating properties of BST thin films grown on glazed-Al₂O₃ substrates were investigated by X-ray diffraction (XRD), atomic force microscope (AFM), and dielectric properties measurement. These results showed that microstructure and dielectric properties of BST thin films grown on glazed-Al₂O₃ substrates were almost consistent with that of BST thin films grown on LaAlO₃ (1 0 0) single-crystal substrates. Thus, the expensive single-crystal substrates may be substituted by extremely cheap glazed-Al₂O₃ substrates.     

Luminescence enhancement of ZnGa2O4:Mn by Ge and Li doping

Structural and optical properties of ZnGa₂O₄:Ge⁴⁺ and ZnGa₂O₄:Ge⁴⁺, Li⁺, Mn²⁺ phosphors were investigated by using X-ray diffraction (XRD), photoluminescence (PL) and cathodoluminescence (CL) measurements. The XRD patterns show that Ge-doped ZnGa₂O₄ has a spinel phase and its lattice constant increases with respect to ZnGa₂O₄. Emission wavelength shifts from 400 to 360 nm in comparison with ZnGa₂O₄ when Ge is doped in ZnGa₂O₄ and a peak related with oxygen defect was observed in Ge-doped ZnGa₂O₄. The CL luminance of ZnGa₂O₄:Ge⁴⁺, Li⁺, Mn²⁺ phosphors is seven times brighter than that of ZnGa₂O₄:Mn²⁺. This drastic luminance improvement can be attributed to Ge doping in ZnGa₂O₄ acting as donor ion and Li doping resulting in increasing conductivity of ZnGa₂O₄. These results indicate that ZnGa₂O₄:Ge⁴⁺, Li⁺, Mn²⁺ phosphors hold promise for potential applications in field-emission display devices with high brightness operating in green spectral regions.     

New red phosphors BaZr(BO3)2 and SrAl2B2O7 doped with Eu for PDP applications

Vacuum ultraviolet (VUV) excitation and photoluminescence (PL) characteristics of Eu³⁺ ion doped borate phosphors; BaZr(BO₃)₂:Eu³⁺ and SrAl₂B₂O₇:Eu³⁺ are studied. The excitation spectra show strong absorption in the VUV region with the absorption band edge at ca. 200 nm for BaZr(BO₃)₂:Eu³⁺ and 183 nm for SrAl₂B₂O₇:Eu³⁺, respectively, which ensures the efficient absorption of the Xe plasma emission lines. In BaZr(BO₃)₂:Eu³⁺, the charge transfer band of Eu³⁺ does not appear strongly in the excitation spectrum, which can be enhanced by co-doping Al³⁺ ion into the BaZr(BO₃)₂ lattices. The luminescence intensity of BaZr(BO₃)₂:Eu³⁺ is also increased by Al³⁺ incorporation into the lattices. The PL spectra show the strongest emission at 615 nm corresponding to the electric dipole ⁵D₀→⁷F₂ transition of Eu³⁺ in both BaZr(BO₃)₂ and SrAl₂B₂O₇, similar to that in YAl₃(BO₃)₄, which results in a good color purity for display applications.     

Electronic structures and ferroelectric properties of ABi2Ta2O9 (A=Ca, Sr, and Ba)

The electronic structures of ABi₂Ta₂O₉ (A=Ca, Sr, and Ba) were calculated by using first-principles under optimized structure. As the size of A-site cation decreases from that of Ba²⁺ to Ca²⁺, the band-gap between O 2p and Ta 5d increases from 2.0 to 2.9 eV, which responses to the stronger orbital hybridizations between Ta 5d and O 2p orbits favoring improvement of the ferroelectric property, decrease in leakage current, and increase in both spontaneous polarization and Curie temperature by the structural distortion. In contrast to CaBi₂Ta₂O₉ and SrBi₂Ta₂O₉, the hybridization between Ba 5p orbits and O 2p orbits in BaBi₂Ta₂O₉ has better structural stability.