Assessment of Traffic Noise Pollution in Burla Town,India; An Inclusive Annoyance Study

Noise pollution is one of the major public health problems in urban areas throughout the world. Noise is unwanted sound which produces undesirable problems in day to day life of human being (e.g., physiological and psychological problems). Rapid increase of the industrialization, urbanization, infrastructure, volume of motor vehicles, and increase in the road networks brought noise pollution to the highest level of disaster in a current situation. In urban areas, road traffic noise plays commanding role among all noise sources and affects the exposed inhabitants. The present work is done to evaluate and assess the traffic noise and its effects in Burla town. Burla, Vidyanagari of Odisha, is an emerging town in India, as it hosts national level of teaching and research institutions like IIM Sambalpur, a medical college- cum-hospital (VIMSAR), a technical university (VSSUT) and Sambalpur University. In last two decade, the road traffic volume has been increased and is facing severe noise pollution to its inhabitants. Noise pollution assessment was made at different locations of the town. This study unveiled the dismal state of noise pollution in the town. Noise contour maps were drawn to visualize the noise level at the traffic and its surroundings. The numbers of hearing impaired patients in different hospitals of the locality are increasing. That shows grim picture of the situation. Regression equations were established taking noise levels with percentage of highly annoyed people during study indicates strong correlation.     

New vehicle noise emission for French traffic noise prediction

Traffic noise prediction models in France are based on vehicle noise emission values defined by the French Guide du Bruit des Transports Terrestres (Noise Guide for Ground Transport - Noise levels prediction). These emission values are suited for models addressing the noise assessments of road infrastructures and the dimensioning of acoustic protections, needing traffic noise estimations in terms of ?_Aeq over a long period of time (an hour or more).The values, obtained from measurements collected in the 70s, are updated in the publication of a new guide (Methodological Guide, Vehicle noise emissions, to be published), which addresses the road surface influence on tyre/road noise. The emission values are now expressed through the contributions of a power unit component, function of traffic speed, traffic flow type and road declivity, and of a rolling noise component, function of traffic speed and road pavement.The paper outlines the procedures followed to determine the components, gives their numerical values, and illustrates some vehicle noise emissions.     

Identification of noise sources on a residential split-system air-conditioner using sound intensity measurements

This paper presents the results of experimental studies of the noise of a residential split-system air-conditioner unit. The compressor and condenser and associated fans were removed from the unit and did not form part of the studies. Care was taken with the unit to separate the inlet and exhaust noise from the noise radiated from the cabinet. The measurements were made with a two-microphone sound intensity probe and these resulted in sound power level data. The sound power levels produced by radiation from the inlet, exhaust and cabinet were obtained for five different volume flow rates. The effect on the sound power generated by removing the coil was investigated. Measurements and subjective studies show that the low frequency sound is predominantly radiated from the exhaust and inlet. At high frequency, the cabinet noise dominates.     

乘性二次噪声驱动的线性过阻尼振子的随机共振

针对乘性二次噪声和加性周期调制噪声联合驱动的线性过阻尼振子, 利用随机平均法推导了系统响应的一阶、 二阶稳态矩以及稳态响应振幅和方差的解析表达式. 理论分析和仿真实验均表明这类系统具有比传统的由线性噪声驱动的线性系统更丰富的动力学特性; 当二次噪声的系数满足一定条件时, 系统稳态响应的振幅及方差均存在广义随机共振现象.     

不同光照条件下CCD相机时间噪声和空间噪声的研究

在用CCD相机进行目标探测时,多数情况下目标的背景具有一定的照度,这个照度会对探测结果产生影响。为了了解背景对探测结果的影响,通过建立CCD相机三维噪声模型及其测试系统,在不同光照条件下对CCD相机的时间噪声和空间噪声进行了测量与分析。给出了测试系统的结构框图和部分测试结果,得到了对CCD输出质量产生主要影响的噪声以及时间噪声和空间噪声随光照度变化的规律。测试结果表明：随着CCD相机光敏面光照度的提高,空间噪声和时间噪声均升高,符合CCD相机的实际性能。     

Noise impact assessment by utilizing noise map and GIS: A case study in the city of Chungju, Republic of Korea

In this study, a scheme to develop a noise map and noise impact assessment method using GIS has been suggested. After developing a road-traffic noise map for the city of Chungju, Republic of Korea, noise impact assessment was performed through analyzing the map. A 3-dimensional terrain model was generated using digital maps and building models were prepared using the information from draft and digital maps. To develop a noise evaluation model, a noise-source map for each road was generated. The noise levels at 25 locations close to roads were measured and compared with the expected noise levels to verify the developed noise map. An excess noise map was generated by comparing the road-traffic noise map with a noise-standard map. Using the excess noise map, the areas exceeding environmental noise standards were effectively evaluated through a GIS space analysis. The 3-dimensional facade noise map was generated to calculate the number of people exposed to a certain noise level.     

热像仪空间NETD测量技术

凝视阵列型热像仪的空间噪声制约着热像仪对远距离目标的探测、分辨、跟踪性能。为解决热像仪空间噪声实际测量问题,分析了热像仪的空间噪声测量原理,给出了热像仪基于信号传递函数的空间噪声测量数学模型,介绍了热像仪某一组、某一区域或全部像素如何剔除时间域NETD,再通过统计计算得到其空间NETD的数学模型。对制冷型MCT320256凝视列阵热像仪的SiTF和空间NETD进行测量,当背景黑体温度为5 ℃时,FOV区域中心信号传递函数（SiTF）为27.29 mV/℃,NETD为0.128 ℃,20 ℃时FOV区域中心SiTF为29.03 ℃,NETD为0.121 ℃。测量结果表明:该方法可评估空间噪声对热像仪性能的影响。     

基于功率谱收敛的低压电力载波信道中的噪声检测与建模

在低压电力线载波信道中,复杂的噪声特性是阻碍低电压电力线载波通信广泛应用的主要原因之一。因此,准确的噪声模型对于设计和优化电力线通信系统具有重要意义。为了得到更加准确噪声模型,给出一种等效背景噪声和功率谱收敛算法。通过对多组拟合参数的求解,并以归一化理论和噪声特性为基础,实现功率谱收敛算法对准确噪声模型的搭建。通过低压电力线信道噪声分析,验证了功率谱收敛算法在噪声模型中应用的可行性。     

Design and experimental tests of active control barriers for low-frequency stationary noise reduction in urban outdoor environment

Active noise control (ANC) techniques are based on the emission of an antiphase signal in order to cancel the noise produced by a primary source. ANC has been successfully applied especially for reducing noise in confined environments, such as headphones and ducts. In this study, we present an application of ANC concepts to the design of an anti-noise barrier for an outdoor environment and its experimental testing. Even though passive techniques are effective in noise reduction at middle-high frequencies, they become less efficient at low frequencies (below 300 Hz) due to the limited dimensions of commonly deployable barriers. In this paper, we analyze the properties of a low-cost active noise system able to efficiently operate on stationary, almost pure-tone, low-frequency noise, such as that produced by electrical transformers and reactors in power and transformation plants. A prototype has been implemented and on-the-field experimental tests have been carried out. The results (confirmed also by numerical simulations) demonstrate a remarkable efficiency in the far field, with a reduction up to 15 dB with respect to the absence of the ANC system.     

CCD噪声标定及其在边缘定位中的应用

成像过程中的CCD噪声将给图像测量结果带来误差,因此能否有效地抑制这些噪声是提高测量精度的关键。分析了CCD暗电流噪声和随机噪声的特性,并针对各自特性提出了相应的噪声标定技术以及抑制方法。结合精密图像测量任务,分别研究了暗电流噪声和随机噪声对一维边缘定位、结构光相移法相位提取的影响。通过仿真和实验,比较了噪声抑制前后的测量结果,结果表明,噪声抑制后边缘定位精度有很大的提高,证实了该CCD噪声标定技术和抑制方法的有效性和必要性。     

Procedure for determining manufacturing defects in a diesel engine in a workshop

Customers’ demands regarding the quality level of automobile vehicles are constantly increasing. These demands include noise, vibration and harshness (NVH) quality as an important item.The main source of NVH in the vehicle is the engine and this is particularly the case for diesel engines. The design effort to reduce the emissions of noise and vibration transmitted to the vehicle’s driver could be lessened because of the assembly process variation and assembly errors.In the present paper, a procedure for assessing these variations or errors is suggested in order to maintain NVH performances within the limits of the design and achieve the quality level expected by customers.In order to achieve it, the measurement of the engine vibration level through three sensors allocated at strategic points is suggested. Some objective criteria based on the vibration level at certain frequencies are established to determine possible assembly defects as a final step of the assembly process.     

基于传声器阵列过顶测量结果的飞机起落架噪声研究

应用由111个传声器组成的平面传声器阵列对当前流行的民用客机进场着陆过程中的机体噪声源进行了实验测量,本对七架窄体客机和七架宽体客机的起落架噪声进行了分析,得到了起落架噪声的频谱特性、指向特性和声级变化。研究发现,起落架噪声的频谱是由宽频随机噪声与一些较为明显的单噪声源组成,起落架噪声的指向性类似于一个水平放置的偶极子。不同飞机起落架噪声的声级相差较大,这说明可以通过重新结构设计降低起落架噪声。     

Characterisation of tram noise emission and contribution of the noise sources

The recent expansion of French tram networks and the related local residential complaints mean that a better knowledge of the situations leading to negative reactions from the local inhabitants is required. Hence a research project has been conducted to evaluate and describe noise and vibration emission of trams as well as the perception by the local residents. This paper investigates tram noise emission on common straight track sections, involving two vehicle scales. First the acoustic power and the mean vertical directivity of the total tramset is assessed using an arc of microphones. Then the localisation and the analysis of the main noise sources are performed by means of a cross array during the tram pass-by. Two tram types representing two generations of French rolling stock, both running on two sites with distinct track characteristics, have been investigated considering the effect of speed, tram type, and track type on the noise source contributions and spectral features. Most sources are located in the lower part of the trams, mainly related to rolling noise, with a strong dependence on speed and track type. The tram type dependency, although globally of second importance, influences greatly the noise spectral distribution and behaviour. The HVAC was the only roof-mounted source which could be detected; its contribution towards building storeys becomes significant in configurations of low rolling noise. A tram noise emission model based on the various noise sources has been developed.     

Noise annoyance assessment of various urban road vehicle pass-by noises in isolation and combined with industrial noise: A laboratory study

Noise maps are diagnosis tools which represent the noise exposure situation using the energy-based index L_den (the day–evening–night level). Two major drawbacks may be attributed to noise maps: (1) energy-based indices only account for one acoustical factor (exposure level) that may give rise to annoyance; (2) combined exposures situations are left unframed.     

电子器件散粒噪声测试方法研究

本文分析了超导量子干涉器(SQUID)和超导-绝缘-超导(SIS)约瑟夫森结散粒噪声测试方法的应用局限性,提出了常规器件的散粒噪声测试方案.针对常规电子器件散粒噪声特性,研究了噪声测试基本条件,并建立了低温测试系统.通过采用双层屏蔽结构和超低噪声前置放大器,实现了较好的电磁干扰屏蔽和极低的背景噪声.在10 K温度下对常规二极管散粒噪声进行了测试,通过理论和测试结果对比分析,验证了测试系统的准确和可信性. 关键词： 散粒噪声 电子器件 噪声测试     

Analysis of the prediction capacity of a categorization method for urban noise assessment

A street categorization method to study urban noise was tested by comparing its results and predictive capacity with those of a reference method – the standard grid method (mentioned in the ISO 1996 standard). To this end, two independent noise surveys were carried out simultaneously in the city of Cáceres (Spain), each using one of these two methods. In a first step, the overall values of each procedure were obtained and the differences analyzed. Then, to analyze the predictive capacity of the categorization method, the two noise maps were constructed, and their predicted values (the noise levels of the squares of the grid for the grid method, and of the categories for the categorization method) were compared with the data of the other procedure used as control.It was found that the categorization method yielded similar results for the overall analysis of the city to those obtained with the value of the points of the grid method with considerably fewer sampling points.The categorization method also seems to be a more suitable predictor for new measurements, particularly for levels in the noisiest streets of the town.     

Analysis of noise properties of an optocoupler device

In the paper, localization of a source of random telegraph signal noise (RTS noise) in optocoupler devices of CNY 17 type was defined. The equivalent noise circuit in low frequency noise for these types of optocouplers was proposed.     

Active control of intermittent noise in a room

I.IntroductionThereverberantnoisesmaybereducedwithanactivenoisecontrol(ANC)systcmformedbyacornermicrophonc-amplifier-1oudspcakersystemina.oom.lllThismeth-odbascdonthenormalmodccancelingprincip1chasalreadybeenclarifiedbothinthco-ryandexperimcnts,andthclimitationandpotcntialityofitsapp1icationalsodiscussedinapreviouspaper.Thediscussionsinthepastlimitedmost1ytothesteadyconditionofnoiscfield,andthisisextendedtothetransientcondihoninthcprcsentwork,viz.thein-llucnceofthecornerANCsystemwhenthenois…     

纳米尺度MOSFET过剩噪声的定性分析

最近实验表明纳米尺度MOSFET中的过剩噪声主要为散粒噪声,而此前研究认为MOSFET中不存在散粒噪声,短沟道MOSFET中的过剩噪声为热噪声. 本文基于器件电流模型分析散粒噪声取代热噪声成为过剩噪声主要成分的转变条件,根据该条件对纳米尺度MOSFET噪声特性的预测与文献报道的实验现象、模拟结果以及介观散粒噪声相关结论相符合. 关键词： 散粒噪声 过剩噪声 纳米尺度MOSFET     

Stationary properties of a single-mode laser system with non-Gaussian and Gaussian noise

A single-mode laser system with non-Gaussian and Gaussian noise is investigated. The stationary mean value and the normalized variance of the laser intensity are numerically calculated under the condition that the stationary probability distribution function (SPDF) is derived. The SPDF as a function of the laser intensity exhibits a maximum. The maximum becomes smaller with the increase of the correlation intensity or the non-Gaussian parameter, where the later is a measure of the deviation from the Gaussian characteristic. The maximum becomes larger as the correlation time increases. The laser intensity stationary mean value decreases with the increase of the correlation intensity or the non-Gaussian parameter while increases with the correlation time increasing. The laser intensity normalized variance increases with the increase of the correlation intensity or the non-Gaussian parameter while decreases as the correlation time increases.