增强碳纳米管场发射性能的沟槽形冷阴极制作(英文)

基于烧结工艺和丝网印刷技术,研发了一种新的沟槽形冷阴极.底部绝缘层由黑色绝缘浆料被烧结后制成,且在底部绝缘层中存在倾斜面.将银浆丝网印刷在条形电极上,依次经烘烤和烧结工艺后形成银电极.利用细砂纸,对银电极进行适当的抛光工艺,以便获得光滑的电极表面.由于特有的银电极形状,从而易于获得更大的场增强因子.将碳纳米管制备在银电极上,形成场发射极.致密的碳纳米管层完全覆盖银电极表面,特有的边缘场增强效应能够使得碳纳米管发射出更多的电子.顶部绝缘层则用于抑制碳纳米管的横向电子发射.结合沟槽形冷阴极,制作了三极结构的场致发射显示器,该显示器具有良好的场致发射特性及优良的发光图像均匀性.与普通冷阴极场致发射显示器相比,沟槽形冷阴极场致发射显示器能够将开启电场从1.86V/μm降低到1.78V/μm,将最大场致发射电流从1 537μA增加到2 863μA,且将最大发光图像亮度从1 386cd/m2提高到1 865cd/m2.该制作技术在场致发射显示器中具有较强的实际应用性.     

改进碳纳米管电接触及粘贴性能的一体式冷阴极制作

在阴极玻璃面板上研发了一种新型的一体式冷阴极.印刷的银浆被烧结后用于形成银底电极.制备了薄层底电极浆料,其中含有大量碳纳米管.将薄层底电极浆料印刷在银底电极表面,然后再将普通碳纳米管浆料制作在烘烤的薄层底电极浆料上.利用高纯度氩气作为保护气体,在烧结炉中对这两种浆料同时进行烧结.烧结后的薄层底电极将和银底电极相互融合在一起,碳纳米管层则覆盖于薄层底电极的表面.同一阴极像素中制作了两个碳纳米管发射极.备用碳纳米管发射极的存在,有利于延长整体显示器的使用寿命.利用薄层底电极作为碳纳米管层和银底电极之间的中间层,能够有效改善碳纳米管的粘贴性能,同时增强二者之间的可靠欧姆接触.利用碳纳米管作为阴极制作了一体式冷阴极场发射显示器.该显示器具有良好的发光图像质量以及更好的场发射特性.与普通碳纳米管阴极场发射显示器相比,一体式冷阴极场发射显示器能够将开启场强从2.11 V/μm减小到1.68 V/μm;将最大场发射电流从905 μA提高到1 866.2 μA;数值为367 μA场发射电流的电流波动不超过4.5％.该一体式冷阴极场发射显示器已经以稳定的发光亮度而连续运行10余天.     

基于丝网印刷技术的碳纳米管场发射冷阴极制作

制备了一种新型碳纳米管浆料,并总结了一套阴极制作工艺.实验表明,质量比约为10%的纯化碳纳米管、5%的纳米金属粉末和有机材料混合形成的印刷浆料,其阴极具有较好的发射均匀特性.在浆料制备过程中通过加入表面活性剂使碳纳米管分散更加均匀.用丝网印刷技术制作阴极,并用机械刀刻的办法制作阴、栅两极之间的沟槽,经烧结后分析阴极膜的电阻率和粘附性随阴极材料组分和制作工艺的变化关系,确定较为合适的升温曲线及丝网目数,阴极碳纳米管的均匀性、导电性的提高改善了发射均匀性.该阴极开启场为2.5 V/μm,在电场强度为3.3 V/μm下,阳极电流为5.6 μA,场发射电流稳定,波动小于5%.     

六角密排多迭层碳纳米管阴极的大电子发射电流和高电子发射稳定性（英文）

研制了一种六角密排多迭层碳纳米管阴极.在这种结构中,衬底银电极由烧结的银浆制作在透明锡铟氧化物电极上,且具有六角形边缘,相邻衬底银电极交错排列于阴极面板上.用ZnO和SnO_2颗粒作为掺杂材料,在衬底银电极和单一碳纳米管层之间制作了底部混杂层;单一碳纳米管层中的碳纳米管主要被用于发射阴极电子.给出了六角密排多迭层碳纳米管阴极的制作工艺,并研究了六角密排多迭层碳纳米管阴极用于电子源的可行性.将氮气作为保护气体,采用烧结方法除掉制备浆料中的有机粘合剂及其它有机杂质.将六角密排多迭层碳纳米管阴极真空密封进三极场发射显示器中,能够形成稳定的电子发射电流.测试结果表明,与普通碳纳米管阴极相比,六角密排多迭层碳纳米管阴极具有更优的电子发射特性,其开启电场为1.83V/μm,最大电子发射电流为2 718.6μA;且其具有良好的电子发射曲线趋势,当电场强度从2.17V/μm增强到3.06V/μm时,电子发射电流的增幅约为1 410.3μA.对电子发射电流随时间的波动变化进行了测试,测试结果显示六角密排多迭层碳纳米管阴极具有可靠且稳定的电子发射电流.绿色发射图像表明六角密排多迭层碳纳米管阴极具有良好的电子发射均匀性及高的电子发射亮度.鉴于其简单的制作结构和制作工艺,六角密排多迭层碳纳米管阴极具有一定的实际应用性.     

印刷制作的双半导体底层碳纳米管薄膜阴极的稳定电子发射

应用带保护气进行烧结的方法,制作了一种双半导体底层碳纳米管薄膜阴极.利用烧结的银浆形成条形银电极,在条形银电极表面制作了具有相同宽度且平行排列的ZnO掺杂底层和TiO2掺杂底层,在掺杂底层上面制备了碳纳米管膜层.由于保护气的防氧化屏蔽,碳纳米管膜层中的碳纳米管未受损害,ZnO粒子和TiO2粒子也在烧结过程中得到了很好地保护,双半导体底层碳纳米管薄膜阴极获得更优的电子发射特性,且电子发射稳定性也得到有效增强.与普通条形银电极碳纳米管阴极相比,双半导体底层碳纳米管薄膜阴极能够将开启电场从2.09V/μm降低到1.91V/μm,将最大电子发射电流从1 653.5μA提高到2 672.9μA.在2.69V/μm电场作用下,普通条形银电极碳纳米管阴极的电子发射电流仅为421.1μA,而双半导体底层碳纳米管薄膜阴极的电子发射电流能够达到723.5μA.从发射电流稳定性实验曲线可以看出,双半导体底层碳纳米管薄膜阴极实现了稳定的电子发射,表明ZnO掺杂底层和TiO2掺杂底层能够应用于真空环境.利用数码相机获得了具有良好质量的发射图像,验证了双半导体底层碳纳米管薄膜阴极制作的可行性和适用性.     

CNx纳米管的制备、结构观察及低场致电子发射性能研究

采用高温热解法，以乙二胺为前驱液，在沉积有铁催化剂的p型硅（111）基底上制备出了定向生长的CNx纳米管.利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CNx纳米管进行了形貌观察和表征.CNx纳米管的高度在20?μm左右，直径在50—100nm之间，具有明显的“竹节状”结构，结晶有序度较差.对CNx纳米管薄膜进行低场致发射性能测试：外加电场为1.4V/μm，观察到20?μA /cm2发射电流，外电场升至2.54V/μm时发射电流达到1.280mA/cm2，在较高外电场下，没有发现电流“饱和”.这比 关键词： CNx纳米管 高温热解 “竹节状”结构 场致发射     

不同氮源制备CNx纳米管薄膜及其低场致电子发射性能

采用高温热解法,分别以氯化铵(NH4Cl)和乙二胺(C2H8N2)为氮源在洁净的硅片上沉积生长CNx纳米管薄膜.利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CNx纳米管进行形貌观察和表征.结果显示不同氮源制备出的CNx纳米管薄膜的洁净度、有序度以及纳米管的结构明显不同.热解乙二胺(C2H8N2)/二茂铁(C10H10Fe)制备出的结晶度较低的"竹节状"结构CNx纳米管平行基底表面有序生长,而且低场致电子发射性能优越,开启电场1.0V/μm,外加电场达到2.89V/μm时发射电流密度为860μA/cm2.     

不同氮源制备CNx纳米管薄膜及其低场致电子发射性能

采用高温热解法，分别以氯化铵(NH₄Cl)和乙二胺(C₂H₈N₂)为氮源在洁净的硅片上沉积生长CN_x纳米管薄膜.利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CN_x纳米管进行形貌观察和表征.结果显示不同氮源制备出的CN_x纳米管薄膜的洁净度、有序度以及纳米管的结构明显不同.热解乙二胺(C₂H₈N₂)/二茂铁(C₁₀H₁₀Fe)制备出的结晶度较低的“竹节状” 结构CN_x纳米管平行基底表面有序生长，而且低场致电子发射性能优越,开启电场1.0V/μm，外加电场达到2.89V/μm时发射电流密度为860μA/cm². 关键词： x纳米管')" href="#">CN_x纳米管 高温热解 “竹节状”结构 场致发射     

CNx纳米管的制备、结构观察及低场致电子发射性能研究

采用高温热解法 ,以乙二胺为前驱液 ,在沉积有铁催化剂的p型硅 (1 1 1 )基底上制备出了定向生长的CNx 纳米管 .利用扫描电子显微镜、高分辨率透射电子显微镜和拉曼光谱对CNx 纳米管进行了形貌观察和表征 .CNx 纳米管的高度在 2 0 μm左右 ,直径在 5 0— 1 0 0nm之间 ,具有明显的“竹节状”结构 ,结晶有序度较差 .对CNx 纳米管薄膜进行低场致发射性能测试 :外加电场为 1 4V μm ,观察到 2 0 μA cm2 发射电流 ,外电场升至 2 5 4V μm时发射电流达到1 2 80mA cm2 ,在较高外电场下 ,没有发现电流“饱和” .这比相同实验条件下改变前驱液制备出的碳纳米管和硼碳氮纳米管的场发射性能优越 .还在“竹节状”结构的基础上对CNx 纳米管的场致电子发射机理进行了讨论     

后栅结构四针状纳米ZnO场致发射显示器的研制

为了解决二极结构FED驱动电压高的问题,设计制作了后栅式三极结构纳米ZnO场致发射显示器,进行了场致发射实验,验证这种结构的可行性。采用丝网印刷厚膜技术实现后栅极结构FED的制作,工艺简单,实现了较低电压的调制。对影响场致发射性能的栅极电压、阳极电压进行了分析讨论。将阴栅极板和荧光屏封装成5英寸三极结构的场致发射显示器,实现了稳定的场致电子发光显示。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.