Study on tapered crossed subwavelength gratings by Fourier modal method

Fourier modal method incorporating staircase approximation is used to study tapered crossed subwavelength gratings in this paper. Three intuitive formulations of eigenvalue functions originating from the prototype are presented, and their convergences are compared through numerical calculation. One of them is found to be suitable in modeling the diffraction efficiency of the circular tapered crossed subwavelength gratings without high absorption, and staircase approximation is further proven valid for non-highly-absorptive tapered gratings. This approach is used to simulate the ``moth-eye' antireflection surface on silicon, and the numerical result agrees well with the experimental one.     

一种多模干涉耦合器的性能模拟

为减小多模干涉（Multimode Interference ,MMI）耦合器件的尺寸,提出一种多模波导宽度为指数型变化的Taper结构.理论分析了多模波导长度与该Taper结构的参量之间的关系.与已被用于减小MMI器件尺寸的抛物线型Taper结构相比,该结构可进一步减小器件的尺寸.就几种波导结构参量下的MMI耦合器,利用宽角光束传播法进行了数值模拟.结果表明,指数型MMI耦合器的性能与抛物线型MMI耦合器的性能类似.指数型Taper结构可以用于MMI器件以减小该类器件的尺寸.     

Effects of tapering on gyrotron backward-wave oscillators

Computer modeling has been utilized to guide gyrotron backward-wave oscillator (gyro-BWO) experiments at the University of Michigan over a wide range of tapered interaction regions and tapered magnetic fields. E-GUN code is used to examine beam and diode characteristics, while MAGIC is used to analyze the dynamics of the problem, such as particle kinematics and microwave power production. Several innovative techniques are used to create matching boundary conditions for a backward propagating wave. MAGIC simulations predict optimum performance of the gyro-BWO operating in a TE₀₁ mode within a combination of uniform interaction region and a tapered axial magnetic field which increases 7.5% in the direction of beam propagation. Experiments have been performed to investigate the effects of tapering magnetic fields and tapered interaction region radii on the high-power microwave emission from the gyro-BWO over the frequency range from 4.0 to 6.0 GHz. These experiments were performed on the Michigan Electron Long-Pulse Accelerator (MELBA) with parameters: V=-0.7 to -0.9 MV, I_diode=1-10 kA, I_tube=1-4 kA, T_e-beam =0.4-1.0 μs. Tapered interaction regions of 37%, 23%, 9.4%, and 6.4% were built and tested to determine their effect on microwave power, pulselength, and inferred energy compared to the uniform interaction region. Magnetic tapering trim coils with a range of -10.6%<ΔB/B₀<+15.0% were constructed which allow the orientation of the field taper to be changed without breaking the vacuum. The peak microwave power from individual shots was from 30 to 55 MW. Experiments on magnetic field tapering indicate that positive tapered fields improve microwave power and energy output     

基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像

本文结合近场扫描结构和纳米线-微光纤耦合技术,提出了一种基于硫化镉纳米线/锥形微光纤探针结构的被动近场光学扫描成像系统.该系统采用被动式纳米探针,保留了纳米探针对样品表面反射光的强约束优势.其理论收集效率为4.65‰,相比于传统的金属镀膜近场探针收集效率提高了一个数量级,可有效地提高扫描探针对样品形貌信息的检测能力;而后通过硫化镉纳米线与微光纤之间高效的倏逝场耦合,将检测的光强信号传输到远场进行光电探测,最终实现对目标样品形貌的分析成像,其样品宽度测量误差在7.28%以内.该系统不需要外部激发光路,利用显微镜自身光源进行远场照明,被动扫描探针仅作为样品表面反射光的被动收集系统.本文基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像方案,可有效地降低探针的制备难度和目标光场的检测难度,简化扫描成像的结构,为近场光学扫描显微系统之后的发展提供新的思路.     

基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像

本文结合近场扫描结构和纳米线-微光纤耦合技术,提出了一种基于硫化镉纳米线/锥形微光纤探针结构的被动近场光学扫描成像系统.该系统采用被动式纳米探针,保留了纳米探针对样品表面反射光的强约束优势.其理论收集效率为4.65‰,相比于传统的金属镀膜近场探针收集效率提高了一个数量级,可有效地提高扫描探针对样品形貌信息的检测能力;而后通过硫化镉纳米线与微光纤之间高效的倏逝场耦合,将检测的光强信号传输到远场进行光电探测,最终实现对目标样品形貌的分析成像,其样品宽度测量误差在7.28%以内.该系统不需要外部激发光路,利用显微镜自身光源进行远场照明,被动扫描探针仅作为样品表面反射光的被动收集系统.本文基于半导体纳米线/锥形微光纤探针的被动式近场光学扫描成像方案,可有效地降低探针的制备难度和目标光场的检测难度,简化扫描成像的结构,为近场光学扫描显微系统之后的发展提供新的思路.     

Soliton propagation in tapered silicon core fibers

Numerical simulations are used to investigate soliton-like propagation in tapered silicon core optical fibers. The simulations are based on a realistic tapered structure with nanoscale core dimensions and a decreasing anomalous dispersion profile to compensate for the effects of linear and nonlinear loss. An intensity misfit parameter is used to establish the optimum taper dimensions that preserve the pulse shape while reducing temporal broadening. Soliton formation from Gaussian input pulses is also observed--further evidence of the potential for tapered silicon fibers to find use in a range of signal processing applications.     

Calculation of optimal fiber radius and whispering-gallery mode spectra for a fiber-coupled microsphere

Coupled-mode theory is used to numerically calculate the coupling coefficients between the modes of a tapered fiber and those of a fused-silica microsphere. In the visible and near-infrared wavelength ranges, typical tapered fibers are multimode. To maximize the photon tunneling from the fundamental fiber mode to the microsphere whispering-gallery mode and to minimize the tunneling from the sphere to higher-order fiber modes, the optimal fiber radius is found to be somewhat smaller than that for phase matching. Also calculated are whispering-gallery mode spectra that take into account the eccentricity of the microsphere and the fact that in an experiment the tapered fiber is not necessarily perfectly aligned with the equatorial plane of the microsphere.     

锥形光纤激发盘腔光学模式互易性研究

光学谐振腔由于其高Q值特性,作为谐振式陀螺的核心元件,有望实现谐振式陀螺的小型化、集成化,但是非互易性噪声成为制约其精度提高的不利因素. 介绍了采用传统半导体工艺制备的盘型腔与熔融法拉制的锥形光纤组成的耦合系统. 当盘型腔在光纤锥区的不同位置进行耦合谐振时,将输入输出正/反对调,观察到输出透射谱发生偏差,谐振频率、耦合效率以及Q值均发生变化,即存在非互易性现象. 用Rsoft软件对锥形光纤倏逝场分布特性进行仿真,理论分析了非互易性产生的原因. 以此可抑制谐振式光学陀螺应用中由锥形光纤与谐振腔组成的耦合系统产生的非互易性噪声. 关键词： 光学谐振腔 锥形光纤 非互易性 谐振式陀螺     

Broadband scattering by tapered nanoantennas

We realize a new design of tapered Yagi–Uda nanoantennas and experimentally study their far‐field light scattering. We show that in comparison with untapered structures the tapered nanoantennas exhibit broadband resonances featuring a distinct line shape. Our observations are supported by numerical calculations, which further reveal the tapered nanoantenna's wavelength‐dependent optical near‐field confinement. (© 2012 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

High-power passively mode-locked tapered InAs/GaAs quantum-dot lasers

We report picosecond pulse generation with high peak power in the range of 3.6 W from monolithic passively mode-locked tapered quantum-dot laser diodes, exhibiting low divergence and good beam quality. These results were achieved using a gain-guided tapered laser geometry. The generation of picosecond pulses with high average power up to 209 mW directly from such tapered lasers is also demonstrated, corresponding to 14.2 pJ pulse energy (14.65 GHz repetition rate). A comparison between the mode-locking performance of these tapered lasers incorporating either five or ten layers of InAs/GaAs self-organized quantum dots in their active layer is also presented.     

一种用于细胞操作的单光纤光镊研究

采用一种抛物线形光纤针作为基本器件,设计制作了单光纤光镊系统.用时域有限差分（Finite Difference Time Domain,FDTD）的方法仿真了抛物线型光纤探针的出射场,并在稳态场下通过对麦克斯韦应力张量积分求出不同介质球半径和折射率情况下,介质球受到的横向和纵向光作用力.实验中此单光纤光镊系统实现了对水中酵母细胞的空间捕获,并且结合两个抛物线形光纤针实现了酵母细胞在两个光势阱中的转移交接.这种单光纤光镊系统结构简单、紧凑,操纵灵活,便于调整.可以适应更多的生物细胞和生物分子的光微操作需求.     

一种分析三维楔脊形光波导与光纤耦合的方法

和直波导的不同在于，三维楔脊形波导中的光场都是不稳定的.分别对波导-光纤耦合、光纤-波导耦合两种情况，将三维楔脊形波导等效为多段短的直波导，利用束传播法同时对三维楔脊形波导内不稳定的入射、反射场，及它们在传播方向上的偏导进行处理，再用自由空间辐射模法计算透射率和反射率.以SOI楔脊形波导和光纤的耦合为例，验证了该方法的可行性. 关键词： 自由空间辐射模法 束传播法 耦合 透射 楔脊形光波导 绝缘体上硅(SOI)     

Fabrication method for ultra-long optical micro/nano-fibers

Nonlinear optical interactions can be enhanced dramatically by tight light-confinement and long interaction-length. Optical fiber tapers with micro/nano-thickness waists considerably increase light-matter interactions in or near their waists. Here, we propose and demonstrate a novel tapering method of fabricating uniform, low-loss, and ultra-long micro/nano fibers. The technique comprises three steps for conventional flame-brushing and pulling, recalibration, and one-directional pulling. Using the proposed method, two strands of tapered fibers are fabricated, having 0.82-μm/1.6-μm diameters, 220-mm/500-mm uniform lengths with <55-nm/66-nm diameter variances, and high transmittances of 90.2%/91.5%. A figure of merit indicating the nonlinear-optic efficiency is defined and used to compare the results obtained in this study with those for tapered fibers in references. The proposed tapering method will be very useful for the fabrication of tapered fiber devices exploiting nonlinear optic effects, including Brillouin scattering, Raman amplification, and other third-order nonlinearities for supercontinuum generation.     

Spatial and spectral filtering of tapered lasers by using tapered distributed Bragg reflector grating

A 1040 nm tapered laser with tapered distributed Bragg reflector (DBR) grating is designed and fabricated. By designing the grating with tapered layout, the tapered DBR grating exhibits the scattering effect on side backward-traveling waves, thus achieving additional suppression of parasitic oscillation. Under the suppression of parasitic oscillation, the spatial and spectral characteristics of the tapered laser are improved. The experimental results show that a near-Gaussian far-field distribution and a kink-free P-I characteristics are achieved, and a single peak emission with a wavelength of 1046.84 nm and a linewidth of 56 pm is obtained.     

Packaging and Characteristics of a Tapered Fiber Sensor for Refractive-Index Measurements

In this study, we demonstrate the design and fabrication of a tapered fiber sensor with a sensing application based on a new (high-sensitivity) package. We study the effect of various geometric parameters such as the uniform segment diameter, the uniform segment length, and the incident angle of the optical wave on the tapered fiber sensor sensitivity for evanescent sensing. Our study shows that high sensitivity of the tapered fiber can be realized by optimizing its parameters. In addition, we design a novel packaging of a tapered-fiber sensor, which can efficiently ensure a uniform stress and reduce the cross sensitivity caused by stress in liquid detection using a tapered fiber sensor. We report the experimental results obtained using this tapered fiber sensor for refractive-index measurements. As the refractive index of liquids varies from 1.417 to 1.423, the measurement results show that the refractive-index sensitivity of the tapered fiber sensor is as high as 4860 nm/RIU.     

Study on pulse compression in tapered holey fibres

This paper proposes three kinds of tapered holey fibres with a multi-layer of holes whose pitch of air holes at the end of untapered and tapered are 5.8 μm and 1.8 μm. The central wavelength which locates in the anomalous dispersion region is 1.55 μm. An adaptive split-step Fourier method is numerically used to study the pulse propagation in tapered holey fibres. For the considered convex tapered holey fibre, at a wavelength of 1.55 μm, a compression factor of 136.7 can be achieved by initial width of 800 fs propagation through a length of 0.8 m. It demonstrates that in anomalous dispersion region, pulse can be compressed with the increase of nonlinearity coefficient and the decrease of dispersion coefficient.     

基于回音壁模式微球腔的PDH稳频技术

光学微球腔因其回音壁模式可获得极高的品质因数而受到广泛关注.本文分析了Fabry-Perot腔和微球腔的基本原理,通过CO2激光熔融光纤实验制得了直径为1.2 mm的微球腔,并测试了微球腔和锥形光纤耦合结构的耦合特性.采用典型的PDH稳频系统设计了基于微球腔的稳频系统,分析了用于鉴频的误差曲线的吸收特性和色散特性,对比了不同调制频率、微球腔直径、耦合损耗、传输损耗下与误差曲线斜率的关系.结果表明:耦合状态下最大Q值可达到1.1×108,调节微球腔内横磁模和横电模的转换可优化耦合效率,匹配微球腔和锥形光纤的尺寸得到了径向二阶模式的透射谱,误差曲线效率达到15.4A mW/MHz.球腔在提高PDH稳频技术灵敏度上具有巨大潜力.     

锥形梯度折射率纤维的成像特性

本文从光线轨迹方程出发,推导了锥形梯度折射率纤维的物像关系式,并得出了它的等效焦距和主平面位置。在m=0(即圆柱形梯度折射率纤维)时,这些公式就简化为已知的形式。文中还讨论了锥形梯度折射率纤维的孔径,同时给出了它的成象相片。 关键词：     

变厚度圆板、环板振动分析的传递矩阵法*

变厚度圆板和环板是在工程设计中经常遇到的一类构件,与等厚度板相比,通过适当的沿径向厚度的变化,这种变厚度板在振动、失稳、弯曲等方面能起到更好的效果。将沿径向任意变厚度圆板、环板划分为一系列等厚度环板单元,基于Mindlin中厚板理论采用逆向推导的方式推导了其传递矩阵,建立起变厚度圆板、环板的频率方程。通过计算线性变厚度环板自由振动时的频率,并与ANSYS模态分析结果相比较,验证了计算模型的精确性。逆向推导法避免了高阶数传递矩阵推导复杂的问题,是对传递矩阵法的很好推广。     

大气激光通信用直锥形光纤发射天线

 提出采用直锥形光纤作为大气激光通信的发射天线,将多模光纤输出的部分相干发散光束变换为准平行光束的方案,既能得到发散角很小的部分相干激光光束,又能保证激光器输出能量的完全传输。采用光线追迹法分析了任意光束从锥形光纤小端面输入、大端面输出的发散角。结果表明,当直锥形光纤长度大于某一特定值时,从小端面输入的入射角小于数值孔径角的所有光线理论上都可以变换为出射角度小于光纤半锥角的光线,因此直锥形光纤可以作为部分相干光源的准直透镜,代替传统的凸透镜,用于改善光束的发散角。对远场光斑进行了数值模拟和实验研究,结果显示：直锥形光纤透镜对朗伯光源的准直光束比传统凸透镜的准直光束发散角小,光斑半径小且均匀性好,证明用此方法可以得到低发散、低空间相干性的光斑。