Continuous zircon-type tetragonal Y_xBi_(0.95-x)VO_4:0.05Dy~(3+) soli solution: synthesis,characterization, and optical properties

We synthesize continuous solid solutions with monophasic zircon-type structure of vanadates of formula YxBi0.95-xVO4:0.05Dy3+(x = 0–0.95) using a combined method of co-precipitation and hydrothermal synthesis. The X-ray diffractometer patterns confirm the formation of a solid solution of YxBi0.95-xVO4:0.05Dy3+, and the results show that all the samples have monophasic zircon-type structure. The absorption spectra of the prepared phosphors show a blue-shift of the fundamental absorption band edge with increasing Y3+ content. An intense tunable characteristic emission of Dy3+ is observed with the increasing ratio of Y/Bi. Finally, the mechanism of luminescence of Dy3+ in the Y3xBi0.95-xVO4:0.05Dy+(x = 0–0.95) solid solution is analyzed and discussed.     

Continuous zircon-type tetragonal Y Bi0.95-xVO4： 0.05Dy^3＋ solid solution： synthesis,characterization, and optical properties

We synthesize continuous solid solutions with monophasic zircon-type structure of vanadates of formula YxBi0.95 VO4：0.05Dy^3＋ （x = 0-0.95） using a combined method of co-precipitation and hydrothermal synthesis. The X-ray diffractometer patterns confirm the formation of a solid solution of YBi0.95-xVO4：0.05Dy^3＋, and the results show that all the samples have monophasic zircon-type structure. The absorption spectra of the prepared phosphors show a blue-shift of the fundamental absorption band edge with increasing Y^3＋ content. An intense tunable characteristic emission of Dy^3＋ is observed with the increasing ratio of Y/Bi. Finally, the mechanism of luminescence of Dya＋ in the YBi0.95 VO4：0.05Dya＋ （x = 0-0.95） solid solution is analyzed and discussed.     

Structural and magnetic properties of BiFe_(1-x)Cr_xO_3 synthesized samples

Chromium doping effects on the structure and the magnetic properties of bismuth ferrite BiFe1-xCrxO3 （x = 0-0.3） （BFCxO） polycrystalline samples are examined. The Perovskite-type oxide samples are synthesized by the conventional solid state reaction at a high pressure of 7 GPa and a temperature of 1273 K. The X-ray powder diffraction patterns at room temperature show that all the samples with x = 0.0-0.3 are described by the rhombohedral structure. In the meantime, it is revealed that the doping of Cr can induce noticeable lattice distortions in the doping samples, and the largest distortion is observed in the case x = 0.1. The magnetic hysteresis loops measured at room temperature exhibit week ferromagnetic behaviors of the samples and the magnetization is found to increase with the increase in Cr concentration. The temperature- dependent magnetization curves indicate antiferromagnetic features in samples. Moreover, Cr-doping tends to reduce the ordering temperature.     

Cation distributions estimated using the magnetic moments of the spinel ferrites Co_(1-x)Cr_xFe_2O_4 at 10K

（A）[B]2O4 ferrite samples with the composition COl_xCrxFe204 （0.0 ≤ x ≤1.0） are prepared using a hydrothermal method, and subjected to calcining in a tube furnace with an argon-flow at 1673 K for 2 h. X-ray diffraction patterns indicate that each of all the samples has a single phase cubic spinel structure with a space group of Fd3m. Magnetic measurements show that the saturation magnetization decreases with as the Cr content x increases. The cation distribution of the samples is estimated by fitting the dependence of the magnetic moments on x at l 0 K, using the quantum mechanical model previously proposed by our group. The calculated sum of the content values of the Cr3＋ and Cr2＋ cations occupying the （A） sites increases as the value of x increases. In the fitting process, the magnetic moment directions of the Cr3＋ and Cr2＋ cations are assumed to be antiparallel to those of the Fe and Co cations, respectively, which is in accordance with Hund＇s rules.     

White light generation of glass ceramics containing Ba_2LaF_7：Eu~（2＋）,Tb~（3＋） and Sm~（3＋） nanocrystals

The Eu 2＋ /Tb 3＋ /Sm 3＋ co-doped oxyfluoride glass ceramics containing Ba2LaF7 nanocrystals are prepared in the reducing atmosphere.The X-ray difiraction results show that Eu 2＋ ,Tb 3＋ and Sm 3＋ ions are enriched into the precipitated Ba2LaF7 nanophase after the annealing process.It deduces efficient energy transfers from Eu 2＋ to Tb 3＋ and Sm 3＋ and intenses warm white luminescence of the glass ceramics. Comparing with the glass,the luminescence quantum yield of the glass ceramics is also enlarged by about 3 times.This demonstrates the potential white light-emitting diode application of the glass ceramics produced in this letter.     

Phase Transition and High Piezoactivity of Sr Doped Lead-Free （Na0.53K0.422Li0.048） （Nb0.89Sb0.06Wa0.05）O3 Ceramics

Lead-free piezoelectric ceramics （Na0.53K0.422Li0.048 ） （Nb0.89Sb0.06 Ta0.05 ）03 （NKLNST） ＋ x tool SrCO3 are prepared by conventional solid state sintering method. The specimens with pure perovskite structure show tetragonal phase at x 〈 0.01, and become pseudo-cubic phase at x 〉 0.02. A lattice parameter discontinuity is found in the specimens with 0.004 〈 x 〈 0.0075, along with a great improvement in piezoactivity. The 0.004 mol SrCO3 added NKLNST ceramics possesses outstanding performances of kp = 0.53, kt = 0.26, and d33=309 pC/N. Moreover, the Sr^2＋ modification inhibits the gra/n growth, decreases the Curie temperature, and induces a diffuse phase transition.     

Structural,M?ssbauer spectroscopy,magnetic properties,and thermal measurements of Y(3-x)Dy_x Fe_5O_(12)

Yttrium iron garnet powder samples((3-x)Dy_x Fe_5O_(12)), where part of yttrium ions are substituted by dysprosium ions with different concentrations are prepared by the solid state reaction method. The properties of the prepared samples are examined by different methods such as x-ray diffraction(XRD), Mssbauer spectroscopy, macroscopic magnetization measurements, and thermal measurements. The XRD measurements show that all the samples reveal the presence of a single garnet phase with a BCC structure. Room temperature Mssbauer spectra indicate that iron ions occupy three magnetic sites, i.e., two octahedral sites and one tetrahedral site. The saturation magnetization and the initial magnetic susceptibility decrease with the increase of Dy~(3+) substitution. The Curie temperature obtained from the thermal measurements seems to be independent of Dy~(3+) substitution.     

The doping effects of BiFe1-xCoxO3 （x=0.0-0.8） in layered perovskite BiaTi3O12 ceramics

BisFe1-xCoxTi3O15 （x=0.0, 0.2, 0.4, 0.5, 0.6, and 0.8） multiferroic ceramics are synthesized in two steps using the solid state reaction technique. X-ray diffraction patterns show that the samples have four-layer Aurivillius phases. At room temperature （RT）, the samples each present a remarkable coexistence of ferromagnetism （FM） and ferroelectricity （FE）. The remnant polarization （2Pr） reaches its greatest value of 14 gC/cm2 at x = 0.6. Remnant magnetization （2Mr） first increases and then decreases, and the greatest 2Mr is 7.8 menu/g when x = 0.5. The magnetic properties for x = 0.4 are similar to those for x = 0.6, indicating that the magnetic properties originate mainly from the coupling between Fe3＋ and Co3＋ ions, rather than from their own magnetic moments.     

Structural,Magnetic and Magnetocaloric Properties of La-deficient La0.77-xSrxCa0.2MnO2 Perovskites

La-deficient La0.77-x Ca0.2SrxMnO3 （0 〈 x 〈 0.1） polycrystalline samples are synthesized using the sol-gel technique. The crystal structures of all the samples are single orthorhombic phase with Pbnm space group. Rietveld analysis of x-ray diffraction patterns shows that the Mn-O-Mn bond angle θUn-O-Mn increases whereas the Mn-O bond length dMn--o decreases monotonically with increasing Sr^2＋ content, which results in a rich overlap between Mn 3d and O2p orbitals and leads to a systematic increase of the Curie temperature in this compound. It is found that the magnetic entropy change has a maximum at x = 0.06 in La^3＋-deficient La0.77-xCa0.2SrxMnO3. This may result from competition between the super-exchange interactions （Mn 4＋-O2--Mn4＋） and double-exchange interactions （Mn^3＋-O^2- -Mn^4＋） originating from the appearance of superfluous Mn^4＋ ions by substitution of Sr^2＋ for La^3＋ in this series. Large magnetic entropy changes of 2.32 and 1.83Jkg^-1K^-1 in the x = 0.06 and x = 0.1 samples at their Tcs of 271 K and 303K upon a low magnetic field （10kOe） make these materials promising candidates at near room temperature.     

Luminescence mechanism and energy level structure of Eu-doped GaN powders investigated by cathodoluminescence spectroscopy

1.5at% Eu-doped GaN powders were prepared by a co-precipitation method.Powder X-ray diffraction(XRD)results shows that there is only the wurtzite phase.Cathodoluminescence spectra were measured at room temperature and liquid nitrogen temperature,respectively.The band-to-band luminescence of GaN was shifted from 373 nm to 368 nm with the temperature decreasing from room temperature to liquid nitrogen temperature.The luminescence peaks at 537,557,579,590,597,614,653 and 701 nm are attributed to the Eu ions related transitions in the host of GaN powders and the peak positions were not influenced by the variation of temperature.With the increase of accelerating voltage,the intensity of all luminescence peaks was increased.The strongest luminescence peak at 614 nm shows non-symmetrical shape and is composed of 612,615 and 621 nm through Lorentzian fitting,which indicates there are oxygen and nitrogen environments of the Eu3+ions in the Eu-doped GaN powders.     

Electronic and Optical Properties of Rock-Salt AIN under High Pressure via First-Principles Analysis

Electronic and optical properties of rock-salt AIN under high pressure are investigated by first -principles method based on the plane-wave basis set. Analysis of band structures suggests that the rock-salt AIN has an indirect gap of 4.53 eV, which is in good agreement with other results. By investigating the effects of pressure on the energy gap, the different movement of conduction band at X point below and above 22.5 GPa is predicted. The optical properties including dielectric function, absorption, reflectivity, and refractive index are also calculated and analyzed. It is found that the rock-salt AIN is transparent from the partially ultra-violet to the visible light area and hardly does the transparence affected by the pressure. Furthermore, the curve of optical spectrum will shift to high energy area （blue shift） with increasing pressure.     

Analysis of flatband voltage shift of metallhigh-k/Si02/Si stack based on energy band alignment of entire gate stack

A theoretical model of flatband voltage （VFB） of metal/high-k/Si02/Si stack is proposed based on band alignment of entire gate stack, i.e., the VFB is obtained by simultaneously considering band alignments of metal/high-k, high-k/SiO2 and SiO2/Si interfaces, and their interactions. Then the VFB of TiN/HfO2/SiO2/Si stack is experimentally obtained and theoretically investigated by this model. The theoretical calculations are in good agreement with the experimental results. Furthermore, both positive VFB shift of TiN/HfO2/SiO2/Si stack and Fermi level pinning are successfully interpreted and attributed to the dielectric contact induced gap states at TiN/HfO2 and HfO2/SiO2 interfaces.     

Influence of different oxidants on the band alignment of HfO2 films deposited by atomic layer deposition

Based on X-ray photoelectron spectroscopy （XPS）, influences of different oxidants on band alignment of HfO2 films deposited by atomic layer deposition （ALD） are investigated in this paper. The measured valence band offset （VBO） value for H2O-based HfO2 increases from 3.17 eV to 3.32 eV after annealing, whereas the VBO value for O3-based HfO2 decreases from 3.57 eV to 3.46 eV. The research results indicate that the silicate layer changes in different ways for H2O-based and O3-based HfO2 films after the annealing process, which plays a key role in generating the internal electric field formed by the dipoles. The variations of the dipoles at the interface between the HfO2 and SiO2 after annealing may lewd the VBO values of H2O-based and O3-based HfO2 to vary in different ways, which fits with the variation of fiat band （VFB） voltage.     

First-principles study of orbital ordering in cubic fluoride KCrF_3

Comprehensive first-principles calculations are performed to provide insight into the intriguing physical properties of the ternary cubic fluoride KCrF3. The electronic structures exhibit a prominent dependence on the effective local Coulomb interaction parameter Ueff. The ground state of the cubic phase is a ferromagnetic （FM） half-metal with Ueff equal to 0, 2, and 4 eV, whereas the insulating A-type antiferromagnetic （A-AFM） state with concomitant homogeneous orbital ordering is more robust than the FM state for Ueff exceeding 4 eV. We propose that the origin of the orbital ordering is purely electronic when the cooperative Jahn-Teller distortions are absent in cubic KCrF3.     

Effect of post-thermal and optical properties annealing on the structural of ZnO thin films prepared from a polymer precursor

ZnO thin films were synthesised by a new method which uses polyvinyl alcohol （PVA） as the polymer precursor. The films are annealed at different temperatures and for different annealing times. The structural parameters, like grain size, lattice constants, optical band gap, and Urbach energy, depend on the annealing temperature and time. All the films possess tensile strain, which relaxes as the annealing temperature and time increase. The photoluminescence （PL） spectra contain only ultraviolet （UV） peaks at low temperature, but as the annealing temperature and time increase, we observe peaks at the blue and green regions with a variation in the intensities of these peaks with annealing temperature and time.     

Characteristics of photonic bands generated by quadrangular multiconnected networks

In this paper, by means of the network equation and generalized dimensionless Floquet-Bloch theorem, we study the influences of the number of connected waveguide segments （NCWS） between adjacent nodes and the matching ratio of waveguide length （MRWL） on the photonic bands generated by quadrangular multiconnected networks （QMNs）, and obtain a series of formulae. It is found that multicombining networks （MCNs） and repetitive combining networks （RCNs） are equivalent to each other and they can all be simplified into the simplest fundamental combining systems. It would be useful for adjusting the number, widths, and positions of photonic bands, and would possess potential applications for the designing of all-optical devices and photonic network devices.     

Energy band structure in optical of spin-1 condensates lattices

The energy band structure of spin-1 condensates with repulsive spimindependent and either ferromagnetic or antiferromagnetic spin-dependent interactions in one-dimensional （1D） periodic optical lattices is discussed. Within the two-mode approximation, Bloch bands of spin-1 condensates are presented. The results show that the Bloch bands exhibit a complex structure as the atom density of mF = 0 hyperfine state increases： bands splitting, reversion, intersection and loop structure are excited subsequently. The complex band structure should be related to the tunneling and spin-mixing dynamics.     

Energy transfer relation of a novel Ce3＋/Pr3＋/Eu3＋ co-doped Sr2.975-xLaxAIO4＋xF1-x solid solution phosphor

The photoluminescence properties and energy transfer of a new Ce3＋/pr3＋/Eu3＋ co-doped solid-solution composi- tion of Sr2.975-xLaxAlO4＋xF1-x （LSAF） phosphor are investigated. Upon doping Pr3＋ into lattices of LSAF：Ce host, a shoulder emission peak is observed at about 620 nm, owing to the transition of 1D2 →3H4. Addition of Eu3＋ to LSAF：Ce3＋, Pr3＋ phosphor results in a sharp emission peaked at 675 nm for the 5D0 →TF3 transition and an increase of the intensity of red emission for Pr3＋ with increasing Eu3＋ concentration. The pathways of energy transfer among Ce3＋, Pr3＋, and Eu3＋ are proposed to be responsible for color addition of a red component to the primary yellow emission, enabling a potential adjustable color for blue excitable warm white.     

An approach to evaluate the efficiency of y-ray detectors to determine the radioactivity in environmental samples

This work provides an approach to determine the efficiency of T-ray detectors with a good accuracy in order to determine the concentrations of either naturally occurring or artificially prepared radionuclides. This approach is based on the efficiency transfer formula （ET）, the effective solid angles, the self- absorptions of the source matrix, the attenuation by the source container and the detector housing materials on the detector efficiency. The experimental calibration process was done using radioactive （Cylindrical ＆ Marinelli） sources, in different dimensions, that contain aqueous 152Eu radionuclide. The comparison point to a fine agreement between the experimental measured and calculated efficiencies for the （NaI ＆ HPGe） detectors using volumetric radioactive sources.     

Y3AlsO12.t：e prepared Solid solubility and photoluminescence of YeAl5O12：Ce3＋ preparedby using （Y1-xCex）203 as precursor

Trivalent cerium-doped yttrium aluminum garnet （YAG：Ce3＋） phosphors are synthesized by solid-state reaction method through using （Yl-xCex）203 solid solutions as precursors. Solid solubility limits of Ce3＋ replacing y3＋ in Y203 and YAG are determined to be 40% and 7.5%, respectively, based on the relationship between the lattice param- eter and chemical composition. Using （Y1-xCex）203 as precursors we synthesize YAG：Ce3＋single phase at 1450 ~C and N2 atmosphere. However, under the same conditions using CeO2 there exists a second phase YA103 as impurity. The photoluminescence intensity of YAG：Ce3＋ increases monotonically with the increase of Ce concentration until it reaches a maximum at solid solubility limits of Ce3＋ in YAG.