Theoretical investigation on near-infrared and visible absorption spectra of nanometallic aluminium with oxide coating in nanoenergetic materials: size and shape effects

The effects of metal core dimension, oxide shell thickness and ellipsoid aspect ratio of Al-Al2O3 core-shell nanoparticles on the near-infrared and visible absorption spectra of nanocomposite Al-Al2O3/nitrocellulose（NC） film are investigated by numerical calculations. Both the size-dependent interband transitions and frequency-dependent free electron damping of the nanometallic aluminium are taken into account in the calculations. Oxidation effect of nanoaluminium is also analysed. It is shown that oxidation may enhance but may also reduce the optical absorption, depending on the excited light energy and initial dimension of nanoparticle. Metal core size and excited light energy dominate the absorption characteristic. The absorption ability of ellipsoidal nanoparticles is larger than that of spheroidal nanoparticles and increases by the square index as the aspect ratio increases. These calculations will provide some significant theoretical guidance for the preparation and laser ignition of nanoenergetic materials.     

Investigation on characteristics of thermal conductivity enhancement of nanofluids

It has been shown that a nanofluid consisting of nanoparticles dispersed in base fluid has much higher effective thermal conductivity than pure fluid. In this study, four kinds of nanofluids such as multiwalled carbon nanotube (MWCNT) in water, CuO in water, SiO₂ in water, and CuO in ethylene glycol, are produced. Their thermal conductivities are measured by a transient hot-wire method. The thermal conductivity enhancement of water-based MWCNT nanofluid is increased up to 11.3% at a volume fraction of 0.01. The measured thermal conductivities of MWCNT nanofluids are higher than those calculated with Hamilton–Crosser model due to neglecting solid–liquid interaction at the interface. The results show that the thermal conductivity enhancement of nanofluids depends on the thermal conductivities of both particles and the base fluid.     

Calculations of state-selective differential cross sections for charge transfer in collisions between O3+ and H2

The non-dissociative charge-transfer processes in collisions between O^3＋ and H2 are investigated by using the quantum-mechanical molecular-orbital coupled-channel （QMOCC） method. The adiabatic potentials and radial coupling matrix elements utilized in the QMOCC calculations are obtained with the spin-coupled valence-bond approach. Electronic and vibrational state-selective differential cross sections are presented for projectile energies of 0.1, 1.0 and 10.0eV/u in the H2 orientation angles of 45° and 89°. The electronic and the vibrational state-selective differential cross sections show similar behaviours： they decrease as the scattering angle increases, and beyond a specific angle the oscillating structures appear. Moreover, it is also found that the vibrational state-selective differential cross sections are strongly orientation-dependent, which provides a possibility to determine the orientations of molecule H2 by identifying the vibrational state-selective differential scattering processes.     

Effects of exchange interaction and spin-fluctuation on the magnetic and magneto-optic properties of NdF3

The exchange interaction between the electrons in the different magnetic ions and the spin-fluctuation of the magnetic ions exist in the paramagnetic media NdF3. The exchange interaction between the electrons in the different magnetic ions may be equivalent to an effective field Hin that is in direct proportion to the magnetization M. The spin-fluctuation of the magnetic ions leads the coefficient of the effective field to vary with temperature. The effective field is given as Hin = -（0.75 ＋ 0.22T） × 10^-5M in NdF3. When the secondary crystal field effect is taken into account, the magnetic susceptibility and Verdet constant are calculated for NdF3 by means of the effective field Hin and the applied field He. The calculated results are in agreement with the measured ones.     

Deceleration of a continuous-wave （CW） molecular beam with a single quasi-CW semi-Gaussian laser beam

We propose a promising scheme to decelerate a CW molecular beam by using a red-detuned quasi-cw semi-Gaussian laser beam （SGB）. We study the dynamical process of the deceleration for a CW deuterated ammonia （ND3） molecular beam by Monte-Carlo simulation method. Our study shows that we can obtain a ND3 molecular beam with a relative average kinetic energy loss of about 10% and a relative output molecular number of more than 90% by using a single quasi-cw SGB with a power of 1.5kW and a maximum optical well depth of 7.33mK.     

Superconductivity without dependence on valenceelectron density in Zn doped YBCO systems

This paper reports that the YBa2Cu3-xZnxO7-δ （x = 0-0.4） samples are researched by means of x-ray diffraction, calculations of binding energy, the positron experiments and variations of oxygen content. The results of simulated calculations, positron experiments and variations of oxygen content support the existence of cluster effect. Moreover, it is concluded that the cluster effect is an important factor on suppression of high-Tc cuprate superconductivity and the Tc does not depend on the density of valence electron directly.     

Dephasing of quantum tunnelling in molecular nanomagnets

Dephasing mechanism of quantum tunnelling in molecular magnets has been studied by means of the spin-coherentstate path integral in a mean field approximation. It is found that the fluctuating uncompensated transverse field from the dipolar-dipolar interaction between molecular magnets contributes a random phase to the quantum interference phase. The resulting transition rate is determined by the average tunnel splitting over the random phase. Such a dephasing process leads to the suppression of quenching due to the quantum phase interference, and to the steps due to odd resonances in hysteresis loop survived, which is in good agreement with experimental observations in molecular nanomagnets Fes and Mn12.     

Enhanced mechanical behaviour of lead zirconate titanate piezoelectric composites incorporating zinc oxide nanowhiskers

This paper reports that the lead zirconate titanate （PZT） piezoelectric composites incorporating zinc oxide nanowhiskers （ZnOw） were prepared by the conventional solid state processing. The whisker-dispersed PZT composites （PZT/ZnOw） presented a significant enhancement in the mechanical properties such as Young＇s modulus, tensile strength and compressive strength. Especially, the compressive strength increased from 153 MPa for the PZT to 228 MPa for the PZT/ZnOw composites. The reinforcement mechanism in strength of the composites was discussed. The me- chanical quality factors of the PZT/ZnOw composites increased considerably, while the piezoelectric constants and electromechanical coupling coefficient decreased slightly. The composites with good electrical and excellent mechanical properties are promising for further applications.     

Electron spin resonance study of the Ba-doping manganite Nd0.5Sr0.5MnO3

We have performed magnetization measurements and electron spin resonance （ESR） on polycrystalline manganites of Nd0.5Sr0.5-xBaxMnO3 （x = 0.1）. Phase separation and phase transitions are observed from the susceptibility and the ESR spectra data. Between 260 K （～ Tc） and 185 K （～ TN）, the system coexists of the paramagnetic phase and the ferromagnetic （FM） phase. Between 185 K and 140 K, the system coexists of the FM phase and the antiferromagnetic （AFM） phase. These results indicate that the system has a very complex magnetic state due to the origin of the instability stemming from manganite Nd0.5Sr0.4Ba0.1MnO3 by partially substituting the larger Ba^2＋ ions for the smaller Sr^2＋ ions.     

Study of valence intersubband absorption in tensile strained Si/SiGe quantum wells

The hole subband structures and effective masses of tensile strained Si/Sil-yGey quantum wells are calculated by using the 6 × 6 k·p method. The results show that when the tensile strain is induced in the quantum well, the light-hole state becomes the ground state, and the light hole effective masses in the growth direction are strongly reduced while the in-plane effective masses are considerable. Quantitative calculation of the valence intersubband transition between two light hole states in a 7nm tensile strained Si/Si0.55Ge0.45 quantum well grown on a relaxed Si0.5Ge0.5 （100） substrates shows a large absorption coefficient of 8400 cm^-1.     

First-principles study of interphase Ni3Sn in Sn--Ni alloy for anode of lithium ion battery

This paper investigates the mechanism of Li insertion into interphase Ni3Sn in Ni-Sn alloy for the anode of lithium ion battery by means of the first-principles plane-wave pseudopotential. Compared with other phases, it is found that the Ni3Sn has larger relative expansion ratio and lower electrochemical potential, with its specific plateaus voltage around 0.3 eV when lithium atoms are filled in all octahedral interstitial sites, and the relative expansion ratio increasing dramatically when the lithiated phase transits from octahedral interstitial sites to tetrahedral interstitial sites. So this phase is a devastating phase for whole alloy electrode materials.     

A b initio calculation of the growth of Te nanorods and Bi2Te3 nanoplatelets

In this paper the growth mechanism of a Te/Bi2Te3 novel structure is studied by ab-initio calculations. The results show that the growth of Te nanorods is determined by the adsorption energy of Te atoms on different crystalline Te surfaces. The adsorption energy of Te on the Te （001） surface is 3.29 eV, which is about 0.25 eV higher than that of Te on the Te （110）. This energy difference makes the preferential growth direction along the 〈 001 〉 direction. In addition, the higher surface energy of Bi2Te3 （110） and the lattice misfit between crystalline Bi2We3 and Te along 〈 001 〉 direction are considered to explain the growth of the Bi2Te3 nanoplatelets, in which Volmer-Weber model is used. The theoretical results are in agreement with experimental observation.     

Spontaneous magnetization and resistivity jumps in bilayered manganite （La0.8Eu0.2）4/3Sr5/3Mn2O7 single crystals

Owing to the inhomogeneous state resulting from the doping of a small number of Eu ions into Laa/3Sr5/3Mn2O7, from the resulting single crystal （La0.8Eu0.2）a/3Sr5/3Mn2O7 we have observed the magnetization jump, the resistivity jump, as well as the relaxation phenomena. For （Lao.sEuo.2）a/3Sr5/3Mn2O7, it has a very delicate ground state due to the interplays among spin, charge, orbital, lattice degrees of freedom. Consequently, the magnetization state is sensitive to temperature, magnetic field, as well as time. Meanwhile, the evolution of the magnetization with time shows a spontaneous jump when both the temperature and the magnetic field are constant. Similar step-like behaviours are also observed in resistivity. All these results suggest that Eu doping can greatly modulate the physical properties of Laa/3Sr5/3Mn2O7 and cause such interesting behaviours.     

Semiclassical calculation of Rydberg He2^＋ molecular of recurrence spectra ion in a magnetic field

Making use of the molecular closed-orbit theory and a new model potential for the Rydberg molecule, we have calculated the recurrence spectra of He^2＋ molecular ion in a magnetic field for different quantum defects. The Fourier transform spectra of He^2＋ molecular ion may be used to perform a direct comparison between peaks in the spectra and the scaled action values of closed orbits of the excited electron in external fields. We find that the spectral modulations can be analysed in terms of the scattering of the excited electron on the molecular core. Unlike the case of the Rydberg atom where the elastic scattering is predominant, modulations produced by inelastic scattering are also vital to the photoabsorption spectrum of the Rydberg molecule. Our results are in good agreement with the quantum results, which suggests that our method is correct.     

Multi-reference calculations of the photodissociation of HSCH3 molecule

This paper performs multi-reference second-order perturbation theory calculations on the ground state and a number of low-lying excited states of HSCH3 molecule, and calculates the vertical excitation energies and low-energy potential-energy curves, based on which the photodissociation channels of HSCH3 at 193,222,248 nm are clarified.     

Low-field electron emission from pinaster-like MoO2 nanoarrays as two-stage emitters

Low-field electron emission is obtained from the pinaster-like MoO2 nanoarrays. The turn-on field of the pinasterlike MoO2 nanoarrays is found to be as low as 2.39 V/μm with the current density of 10μA/cm2. The enhancement factor is extracted to be 3590 from the Fowler-Nordheim plot. These excellent emission properties are attributed to the special structure of the pinaster-like MoO2 nanoarrays and confirmed by the calculation in the frame of the two -stage model. Our results show that the pinaster-like MoO2 nanoarrays are promising candidate in realizing field emission displays.     

Micromagnetic simulation for high field sensors with perpendicular magnetizations

In this paper, we present a micromagnetic design for high field sensors. The hard layer of the sensors is L1垂直磁化;强磁场传感器;微磁学模拟;高巨磁阻效应micromagnetic simulation, giant magnetoresistive, coercivity, demagnetizing fieldProject supported by the Nature Science Foundation of China (Grant No~10404019) and by the Science and Technology Committee of Shanghai (Grant No~05PJ14090).2006-09-232006-11-28In this paper, we present a micromagnetic design for high field sensors. The hard layer of the sensors is L1垂直磁化;强磁场传感器;微磁学模拟;高巨磁阻效应micromagnetic simulation, giant magnetoresistive, coercivity, demagnetizing fieldProject supported by the Nature Science Foundation of China (Grant No~10404019) and by the Science and Technology Committee of Shanghai (Grant No~05PJ14090).2006-09-232006-11-28In this paper, we present a micromagnetic design for high field sensors. The hard layer of the sensors is L10-FePt which is magnetized perpendicularly to film plane and the sense layer is NiFe which is magnetized in the film plane. The magnetization configurations of the hard and sense layers at different external magnetic fields have been simulated. In micromagnetic simulation, the sense field up to one tesla can be reached by using this sensor. We find that whether the sensor has a symmetric or an asymmetric field-sensing window is determined by the coercive field of the hard layer and the demagnetizing field of the sense layer.Corresponding author. E-mail： yaowen@mail.tongji.edu.cn/qk/85823A/200706/24631993.html7000, 7500, 7570P, 7540Mhttp://cpb.iphy.ac.cn/CN/10.1088/1009-1963/16/6/042https://cpb.iphy.ac.cn/CN/article/downloadArticleFile.do?attachType=PDF&id=1092012006-09-23In this paper, we present a micromagnetic design for high field sensors. The hard layer of the sensors is L10-FePt which is magnetized perpendicularly to film plane and the sense layer is NiFe which is magnetized in the film plane. The magnetization configurations of the hard and sense layers at different external magnetic fields have been simulated. In micromagnetic simulation, the sense field up to one tesla can be reached by using this sensor. We find that whether the sensor has a symmetric or an asymmetric field-sensing window is determined by the coercive field of the hard layer and the demagnetizing field of the sense layer.     

Preparation and luminescence characteristics of Eu^2＋ activated silicate phosphor

This paper synthesizes the Sr2SiO4：Eu^2＋ phosphor by high temperature solid-state reaction. The emission spectrum of Sr2SiO4 ： Eu^2＋ shows two bands centred at 480 and 547 nm, which agree well with the calculation values of emission spectrum, and the location of yellow emission of Sr2SiO4 ： Eu^2＋ is influenced by the Eu^2＋ concentration. The excitation spectrum for 547 nm emission has two bands at 363 and 402 nm. The emission spectrum of white light emitting diodes （w-LEDs） based on Sr2SiO4 ： Eu^2＋ phosphor ＋ InGaN LED was investigated.     

Light scattering of nanocrystalline TiO2 film used in dye-sensitized solar cells

This paper studies the light scattering and adsorption of nanocrystalline TiO2 porous films used in dye-sensitized solar cells composed of anatase and/or rutile particles by using an optical four-flux radiative transfer model. These light properties are difficult to measure directly on the functioning solar cells and they can not be calculated easily from the first-principle computational or quantitative theoretical evaluations. These simulation results indicate that the light scattering of 1 25 nm TiO2 particles is negligible, but it is effective in the range of 80 and 180 nm. A suitable mixture of small particles （10 nm radius）, which are resulted in a large effective surface, and of larger particles （150 nm radius）, which are effective light scatterers, have the potential to enhance solar absorption significantly. The futile crystals have a larger refractive index and thus the light harvest of the mixtures of such larger rutile and relatively small anatase particles is improved in comparison with that of pure anatase films. The light absorption of the 10μm double-layered films is also examined. A maximal light absorption of double-layered film is gotten when the thickness of the first layer of 10 urn-sized anatase particles is comparable to that of the second larger rutile layer.     

First-principles study of structural,electronic, and magnetic properties of Mn4XGe3 （X = Fe,Co,Ni）

In order to search for promising candidates for spintronic applications, this paper systematically studies three ternary compounds based on Mn5Ce3 by using a full-potential linearized augmented plane wave method within the density functional theory. Through structure optimization and electronic structure calculations, it finds that Mn4FeCe3 and MnaCoCe3 have much higher spin-polarization than original intermetallic compound Mn5Ce3, although the spin polarization of MnaNiCe3 is lower than that of Mn5Ce3. The calculated result is in agreement with experiment in the case of Mn4FeCe3. Both of them can be taken as promising candidates for spintronics applications because of their high spin-polarization and compatibility with semiconductors.