紧凑型回旋加速器物理问题及调束技术

介绍了紧凑型回旋加速器CYCIAE-100的特点及设计过程中重点考虑的一些物理问题,如紧凑型直边扇磁铁结构的轴向聚焦、异性高频谐振腔的设计、空间电荷效应等。研究了该加速器的调束技术,包括调束方案、诊断设备布局及径向靶测量的束流信息、物理图像。CYCIAE-100的主磁铁设计中,为降低磁铁和高频腔的加工难度而采用直边扇形磁极,为解决直边扇形磁极在大半径处的轴向聚焦力下降的问题,采用变气隙技术,从而有效提高轴向聚焦力。采用自行开发的基于PIC技术的宏离子模拟程序OPAL-CYCL进行了空间电荷效应的研究,结果表明,CYCIAE-100的极限流强为10 mA。     

Stop band characteristics of a TESLA cavity coaxial-type HOM coupler

A TTF-type coaxial higher order modes (HOM) coupler has been used in a TESLA 9 cell cavity. It is impossible to measure the stop band characteristics of the HOM coupler with the cavity. A measurement device for the coaxial transmission line type for the HOM coupler has been designed at Peking University. Experimentally it was shown that the average voltage standing wave ratio of the coaxial transmission line is smaller than 1.08. The experimental results of the stop band characteristics of the TTF-type HOM coupler have been fitted for the simulation. This paper describes the design of the measurement device and discusses the experimental and simulation results of stop band characteristics of the HOM coupler.     

Absorption and transmission spectral measurement of fiber-optic components using supercontinuum radiation

We report on broadband absorption and transmission measurements using supercontinuum sources generated in microstructured fibers. The advantages of this measurement technique include high brightness and broad bandwidth. Furthermore, the high spatial coherence of the supercontinuum source allows for efficient coupling into the device under test compared to standard light bulbs. Employing this technique, we measure the impurity absorption spectrum of Erbium-doped fibers with both low and high dopant concentration. The transmission spectra of a photonic bandgap fiber and a high-finesse fiber cavity are also characterized.     

A device for aerosol charge measurement and sampling

In this work, a device for aerosol charge measurement and dust sampling is presented. The device is basically an open-ended Faraday pail with a filter to collect the sample. It can be attached to a pneumatic transfer line or it can be used with hose, depending on the situation. When the system was developed, special emphasis was put on the ease of use and reliability. The device can be assembled and disassembled with one twist. The reliability and the operation of the device was tested using two different powder materials, test dust and polystyrene pellets, and four different hose materials. By combining these materials, different extents and polarities of tribo-charge were obtained. The device proved to be easily operated and the test results showed good reproducibility.     

单线法测量横向阻抗系统设计与模拟计算

 介绍了单线法测量横向阻抗的基本原理、系统设计和初步模拟计算结果。单线法横向阻抗测量系统由待测元件/参考元件、内置导线、导线偏移调节机构、阻抗匹配段和测量仪器构成。调节机构可以精确调整内置导线的横向位置以激励偶极模式。利用微波工作室软件模拟计算待测元件（2 856 MHz“凸型”腔）的偶极模。“凸型”腔横向阻抗的幅值和偶极模频率的计算结果与ABCI程序数值计算的结果基本相符，说明了单线法横向阻抗测量系统理论上的可行性。     

基于PXI Express总线的多通道数字化仪软件技术研究

针对各种数字化设备高采样率和高分辨率的测试需求,设计一种基于PXI Express总线的多通道数字化仪。该数字化仪开放性高,灵活性好,模块化强,广泛应用于测控领域中。结合数字化仪开发过程中所面临的关键问题及解决方案,重点从设备驱动程序、接口封装和应用软件三个方面进行分析阐述。首先,深入研究了KMDF设备驱动开发过程中几个关键问题,如配置空间访问、中断处理、DMA数据传输等的运行机制及实现方法;然后,以数字化仪应用需求为背景,阐述了采用.Net平台下三层体系架构的软件总体设计;最后,大量实验测试和结果分析表明,该数字化仪具有较强的可靠性和稳定性,达到预期技术要求和性能指标。     

超导腔垂直测量系统中的磁屏蔽

简要介绍空间磁场对纯铌超导加速腔性能的影响,以及在超导腔垂直测量时对空间磁场进行有效屏蔽的方法.由于多数磁性材料对应力和温度变化非常敏感,而且国内缺乏在低温下相关磁屏蔽材料性能的数据,为此对8种国产铁磁和软磁材料在低温下的初始磁导率进行了测量,并给出了相应的测试结果.最后介绍了作者研制的1.3GHz超导腔垂直测量低温恒温器内置式磁屏蔽装置及其性能.     

100MeV负氢回旋加速器高频冷模腔的理论与实验研究

在回旋加速器中, 高频系统为带电粒子加速提供能量, 高频谐振腔作为高频系统中的关键部件,     

Compressing ultrafast electron pulse by radio frequency cavity

An ultrafast electron diffraction technique with both high temporal and spatial resolution has been shown to be a powerful tool to observe the material transient structural change on an atomic scale.The space charge forces in a multi-electron bunch will greatly broaden the electron pulse width,and therefore limit the temporal resolution of the high brightness electron pulse.Here in this work,we design an ultrafast electron diffraction system,and utilize a radio frequency cavity to realize the ultrafast electron pulse compression.We experimentally demonstrate that the stretched electron pulse width of14.98 ps with an electron energy of 40 keV and the electron number of 1.0 ×10~5 can be maximally compressed to about0.61 ps for single-pulse measurement and 2.48 ps for multi-pulse measurement by using a 3.2-GHz radiofrequency cavity.We also theoretically and experimentally analyze the parameters influencing the electron pulse compression efficiency for single-and multi-pulse measurements by considering radiofrequency field time jitter,electron pulse time jitter and their relative time jitter.We suggest that increasing the electron energy or shortening the distance between the compression cavity and the streak cavity can further improve the electron pulse compression efficiency.These experimental and theoretical results are very helpful for designing the ultrafast electron diffraction experiment equipment and compressing the ultrafast electron pulse width in a future study.     

基于光纤光栅谐振腔的掺镱全光纤激光器设计(英文)

采用数值分析方法分析了光纤长度、后腔镜反射率等因素对激光器输出阈值泵浦功率、输出功率的影响,为全光纤激光器的优化设计提供了理论基础.在设计过程中采用光纤光栅作为光纤激光器的反馈与选频腔镜,通过锥度光纤实现了泵浦模块与掺镱双包层光纤之间的低损耗连接以及高效率的泵浦激光功率传输,成功研制了具备稳定窄化线宽激光输出的掺镱全光纤激光器.实验得到了波长峰值在1 082 .50 nm,谱线宽度0 .113 nm,最大输出功率8 .5 W,泵浦阈值功率0 .8 W,斜率效率为70 .8 %的稳定激光输出.     

One-shot quantum measurement using a hysteretic dc SQUID

We propose a single shot quantum measurement to determine the state of a Josephson charge quantum bit (qubit). The qubit is a Cooper pair box and the measuring device is a two junction superconducting quantum interference device (dc SQUID). This coupled system exhibits a close analogy with a Rydberg atom in a high Q cavity, except that in the present device we benefit from the additional feature of escape from the supercurrent state by macroscopic quantum tunneling, which provides the final readout. We test the feasibility of our idea against realistic experimental circuit parameters and by analyzing the phase fluctuations of the qubit.     

Beam dynamics study of RFQ for CADS with a 3D space-charge-effect

The ADS (accelerator driven subcritical system) project was proposed by the Chinese Academy of Sciences. The initial proton beams delivered from an electron cyclotron resonance ion source can be effectively accelerated by 162.5 MHz 4.2 m long room temperature radio-frequency-quadrupoles (RFQ) operating in CW mode. To test the feasibility of this physical design, a new Fortran code for RFQ beam dynamics study, which is space charge dominated, was developed. This program is based on Particle-In-Cell (PIC) technique in the time domain. Using the RFQ structure designed for the CADS project, the beam dynamics behavior is performed. The well-known simulation code TRACK is used for benchmarks. The results given by these two codes show good agreements. Numerical techniques as well as the results of beam dynamics studies are presented in this paper.     

Measuring the performance of the coaxial HOM coupler on a 2-cell TESLA-shape copper cavity

Coaxial High Order Mode (HOM) couplers have been fabricated at Peking University and their RF performance has been measured on a test device consisting of a coaxial transmission line and a 2-cellTESLA-shape copper cavity. The test results on the 2-cell TESLA-shape copper cavity with HOM couplers indicate that the coupler can cut off the fundamental mode TM010 and absorb HOMs effectively after a careful adjustment. The optimal angle of the HOM coupler with the beam tube is found. The initial test results of HOM couplers are presented in this paper.     

自由电子激光器谐振腔内电子束和激光脉冲的时间同步

研究自由电子激光器谐振腔内电子束和辐射的时间同步问题.这是激光器谐振腔设计中的一个重要问题.本文讨论了腔内布儒斯特窗片对光路的影响.研制出由微机控制谐振腔的精密微调装置,扫描范围为±3cm,微调精度达1μm.     

射线检测管道垢厚方法的研究进展

报告了我国开展射线检测原油管道垢厚的研究进展. 介绍了γ射线透射检测垢厚的基本原理、 模拟实验装置及主要研究成果. 研究表明, 研制透射型测垢仪是可行的. 另外, 还给出了南京大学关于表面型中子测垢仪和γ射线测垢仪的初步预研结果.     

真空条件下低温红外辐射测量技术研究

针对红外载荷在轨服役期间低温目标的红外辐射探测需求，提出一种真空条件下的低温红外辐射测量方案，并研制了测量装置。测量装置主要由低温红外光学系统、低温机械结构、低温红外探测系统及微弱信号处理系统构成。低温红外辐射经过光学系统会聚到探测器像面，锁相放大器利用相干检测技术将目标信号提取，完成低温红外辐射的测量。测量装置研制完成后，在真空仓内使用标准黑体辐射源，在198 K～423 K温度范围内进行了低温红外辐射定标试验，取得了有效的试验数据，测量不确定度在5%以内。该文提出的真空条件下低温红外辐射测量技术可为在轨空间红外载荷低温红外目标探测设计提供重要数据支撑。     

U型光纤传感器液体浓度测量系统的研究

为了测量液体的浓度,设计制作了一个U型光纤传感系统.在固定光源波长以及恒温的条件下,激光光源发出的光信号在U型光纤传感区域发生全反射,并且得到被测液体参数的调制,通过测量光接收端电信号的大小,可以得到被测液体的浓度.整个实验装置结构简单,主要由激光光源、U型光纤传感探头和光接收器件组成.实验以食盐溶液和蔗糖溶液为测量对...     

声脉冲法空间电荷测量系统的研究

气体中空间电荷的分布与电晕放电的机理紧密相关, 获取电晕放电过程中空间电荷分布对深入研究电晕放电起始、自持过程有着重要作用, 但是如何准确获得电晕放电过程中的空间电荷分布一直是国际上尚未解决的难题. 本文基于声脉冲法提出一种电场信号解耦算法, 推导了空间电荷在声场中被调制产生的电场信号与声脉冲信号和空间电荷密度之间的数值关系, 讨论了不同测量情况下声发射系统的设计要求; 搭建了一套可用于实时测量针板电极电晕放电空间电荷分布的非接触式测量系统, 该系统主要包括声脉冲发生模块、空间电荷模块及电场信号解耦算法模块. 运用该系统实现了声脉冲激发作用下电场信号的测量, 通过提出的电场信号解耦算法得到了空间电荷密度, 对其测量结果与电晕电流法测量结果进行比较, 验证了电场信号解耦算法的有效性. 该算法可以应用于空间电荷一维、二维和三维测量系统中.     

New technique for electrostatic charge measurement in gas–solid fluidized beds

Electrostatic charge generation within gas–solid fluidized bed reactors has been a concern to industry for many years. Over the years, numerous methods for measuring this phenomenon within a fluidization column have been proposed. This paper focuses on the design of a new method that minimizes effects such as extra charging due to particle handling and bed hydrodynamic disruption due to the location of the measurement device. In addition, the new method provides the bulk charge of the bed particles rather than a local measurement. The device is flexible and can be adapted to a range of fluidization columns. The new method developed consisted of a Faraday cup placed within the windbox of a fluidization column. The distributor plate was designed in such a way that it can be automatically opened to drop the charged fluidizing particles into the Faraday cup below. The new measurement technique was validated by conducting fluidization experiments in a system consisting of a 0.10 m in diameter carbon steel column with glass beads as the fluidizing particles. The technique was proven to be suitable for measuring the total net electrostatic charges in gas–solid fluidized beds.     

抑制超短电子脉冲展宽的补偿方法

 提出了一种有效的利用补偿元件抑制空间电荷效应所致脉冲展宽的方法。此元件为一轴对称的圆柱形空腔,金属侧壁和供脉冲输出的端面金属栅网接地以保持0电位,供脉冲进入空腔的端面小孔的内壁涂导电层并施以正电位,通过选择此端面的介电常数分布而在此端面上形成特定的电位分布。如此形成的补偿元件内部电场能够在不引入附加电子能量弥散的基础上,在空点电荷效应所致脉冲展宽极为严重的纵向和横向这两个主要方向上,均能够有效地抑制空间电荷效应,从而起到补偿电子脉冲展宽的作用。