单空位缺陷诱导的扶手椅型石墨烯纳米带电学性能的转变

本文基于密度泛函理论的第一性原理计算了单空位缺陷对 扶手椅型石墨烯纳米带电学特性的影响. 计算结果表明: 当单空位位于纳米带边缘位置时, 系统结构最稳定. 不同位置上单空位缺陷的引入都会使得原本为半导体的本征 扶手椅型石墨烯纳米带变成金属性; 随着单空位浓度的减小, 其对纳米带能带结构的影响逐渐减弱; 随着纳米带宽度的增大, 表征其金属性的特征值表现出震荡性的减弱. 单空位缺陷诱导的扶手椅型纳米带的半导体特性到金属特性的转变为石墨烯在 电子器件中的应用提供了理论指导. 关键词： 扶手椅型石墨烯纳米带 单空位缺陷 电学性能     

氮掺杂和空位对石墨烯纳米带热导率影响的分子动力学模拟

石墨烯是近年纳米材料研究领域的一个热点,其独特的热学性质受到了广泛关注,为了实现对石墨烯传热特性的预期与可控,利用氮掺杂和空位缺陷对石墨烯进行改性.采用非平衡态分子动力学方法研究了扶手形石墨烯纳米带中氮掺杂浓度、位置及空位缺陷对热导率影响并从理论上分析了热导率变化原因.研究表明氮掺杂后石墨烯纳米带热导率急剧下降,氮浓度达到30%时,热导率下降了75.8%;氮掺杂位置从冷浴向热浴移动过程中,热导率先近似的呈线性下降后上升;同时发现单原子三角形氮掺杂结构比多原子平行氮掺杂结构对热传递抑制作用强;空位缺陷的存在降低了石墨烯纳米带热导率,空位缺陷位置从冷浴向热浴移动过程中,热导率先下降后上升,空位缺陷距离冷浴边缘长度相对于整个石墨烯纳米带长度的3/10时,热导率达到最小.石墨烯纳米带热导率降低的原因主要源于结构中声子平均自由程和声子移动速度随着氮掺杂浓度、位置及空位缺陷位置的改变发生了明显变化.这些结果有利于纳米尺度下对石墨烯传热过程进行调控及为新材料的合成应用提供了理论支持.     

石墨烯/BiOI纳米复合物电子结构和光学性质的第一性原理模拟计算

光催化材料在解决能源短缺和环境污染等问题方面具有广泛的应用前景,本文通过构建BiOI纳米薄膜并将其与石墨烯复合起来,得到具有较高的比表面积和良好的光催化活性的纳米复合物光催化材料.采用基于密度泛函理论的第一性原理方法分别计算了单层和双层BiOI纳米片及其与石墨烯复合结构的电子结构和光学性质,并考虑了BiOI中的Bi,O,I三种空位缺陷对电子结构和光学特性的影响.计算结果表明,由于BiOI和石墨烯之间的相互作用,在石墨烯和BiOI界面处自发发生电荷转移,形成电子-空穴对,且石墨烯衬底可有效提高BiOI对可见光的光吸收,提高其光催化活性.对空位缺陷的计算表明,Bi空位缺陷可促进石墨烯和BiOI之间的电荷转移,形成更多的层间电子-空穴对;相反,O和I空位缺陷则抑制层间电荷转移,减少电子-空穴对的生成.     

纳米铜薄膜塑性变形中空位型缺陷形核与演化的分子动力学研究

本文采用分子动力学方法模拟了纳米单晶铜薄膜在单向拉伸载荷作用下的塑性变形过程, 重点分析了空位型缺陷的形核过程和演化机理. 在模拟过程中, 采用镶嵌原子势描述原子间的相互作用. 模拟结果表明纳米铜薄膜中塑性变形起源于位错的表面形核, 而空位型缺陷的形核及演化都与晶体内部的位错运动密切相关. 空位型缺陷通常从位错割阶及层错交截处开始形核, 以单空位、层错四面体和不规则空位团等形式存在. 关键词： 纳米薄膜 塑性变形 空位 层错四面体     

单空位缺陷对载能氢原子与石墨层间碰撞的能量交换的影响的分子动力学研究

本文采用分子动力学方法研究空位缺陷对石墨层中碳氢粒子碰撞的影响.将氢原子以不同能量分别向单空位缺陷边缘的两个碳原子轰击,分析了入射氢原子的能量损失、发生吸附反应的能量范围和靶原子的能量传递过程.研究发现,单空位缺陷边缘的碳氢粒子更易发生吸附反应;在碳氢粒子正碰过程中,氢原子随入射能量变化出现了双反射区域;碳氢粒子在空位缺陷边缘吸附后,形成了高结合能的sp²结构,并出现悬挂键,其临近的碳碳键能未降低;单空位缺陷边缘的碳原子吸附氢原子能量的能力强而传递能量的能力弱.这些结果对理解聚变反应 关键词： 面向等离子体材料 分子动力学方法 单空位缺陷     

含有缺陷3C-SiC陶瓷拉伸性能的分子动力学模拟

SiC纤维增韧SiC基复合材料(SiC_f/SiC)由于其优越的性能而成为新一代核能系统重要候选材料之一.材料中的缺陷会使材料的力学性能发生变化,本文运用分子动力学程序LAMMPS模拟计算了分别含有空位、微空洞和反位替代三种缺陷的3C-SiC结构体系沿[100]方向的拉伸变形过程,原子间相互作用采用Tersoff多体势描述.通过模拟得到不同缺陷体系的应力—应变曲线和拉伸过程中体系能量,通过分析应力-应变曲线,得到了不同缺陷体系的杨氏模量、断裂应变、拉伸强度随缺陷"浓度"的变化关系,最后分析了3C-SiC拉伸断裂机理.研究结果表明,空位和微空洞对杨氏模量、拉升强度的影响类似,都是随着缺陷"浓度"的增加而减小,反位替代缺陷使体系的杨氏模量随缺陷"浓度"的增加而增大.     

石墨烯表面的特征水分子排布及其湿润透明特性的分子动力学模拟

石墨烯因其独特的分子构型、卓越的物理化学性能而受到广泛关注.本文首先利用分子动力学模拟比较了单层石墨烯、铜、二氧化硅三者表面的浸润性,除了接触角的比较,还分析了基底表面的水分子排布,得到石墨烯表面的特征水分子排布为:表面有两层密集的水分子层,其中靠近基底的密集水分子层中O—H键与垂直基底方向夹角集中在90°附近,并且基底表面的氢键几乎都垂直于基底.另一方面,本文研究了石墨烯浸润透明特性,发现在铜和二氧化硅上添加一层石墨烯,对铜的浸润性影响较小,对二氧化硅的浸润性影响很大,不仅使其上接触角显著增大,还使得基底表面的水分子排布呈现出类似单层石墨烯上的规律.本文使用分子动力学模拟方法从微观尺度验证了文献的实验结果,从基底表面水分子排布角度分析了石墨烯独特的浸润透明特性,为进一步开发石墨烯在微结构设计上的应用提供了理论指导.     

单层石墨烯杨氏模量的理论模型

石墨烯力学性能的研究对其在半导体技术中的应用是十分重要的,本文基于半连续体模型并结合石墨烯纳米结构特性,通过对原子的描述构建了石墨烯形变分量和位移分量的新关系,从而给出了单层石墨烯结构形变能,并计算了不同尺寸单层石墨烯的杨氏模量值.通过对不同方向杨氏模量的分析,讨论了单层石墨烯的手性行为.结果表明:随着尺寸的增加,单层石墨烯两个方向的杨氏模量分别趋于0.746 TPa和0.743 TPa,当尺寸相同时,两方向杨氏模量的最大差值不超过0.003 TPa,此结果与文献报道结果相符.在小应变情况下,单层石墨烯薄膜呈各向同性,且薄膜尺寸变化对该特性影响不大.该计算结果对研究石墨烯的其它力学特性提供一定的参考价值.     

N2分压对ZrN/WN纳米多层膜缺陷性质与力学性能的影响

利用射频磁控溅射系统在不同N₂分压的条件下，制备了一系列ZrN/WN纳米多层膜.借助慢正电子湮没技术分析了样品的缺陷性质，采用纳米压痕仪研究了多层膜的力学性能.结果发现：N₂分压为0.4Pa的多层膜具有最小的空位型缺陷浓度，其中心层和膜基结合层的平均S参数分别为0.4402和0.4641，而较低或较高的N₂分压都可能导致空位型缺陷浓度的增加.随着空位型缺陷浓度的减小，多层膜的硬度和临界载荷增大.对于空位型缺陷浓度最小的多层膜，其硬度和临界载荷达到最大值，分别为34.8GPa和100mN，说明较低的缺陷浓度有利于提高多层膜的力学性能. 关键词： ZrN/WN纳米多层膜 缺陷性质 力学性能 慢正电子湮没     

基于分子动力学模拟的石墨烯镁基复合材料力学行为

镁合金因其低密度被视为最轻的工程结构金属材料,但因较差的塑性变形行为限制了其广泛应用,因此增强镁合金的综合力学性能已经成为当前材料领域的研究热点.本文采用分子动力学模拟方法,研究了在拉伸载荷下石墨烯对金属镁变形行为和力学性能的影响.研究结果表明,石墨烯的嵌入能够明显提升金属镁的强度和杨氏模量,并对其塑性变形阶段的第二次应变强化产生较大影响.研究指出,石墨烯镁基(GR/Mg)复合材料和纯镁的塑性变形行为相同,在塑性变形过程中均发生了从密排六方到体心立方再到密排六方结构的相变.石墨烯嵌入位置对GR/Mg复合材料上下两部分镁基体的塑性变形行为有较大的影响.当石墨烯嵌入高度较小时,石墨烯下方的镁基体塑性变形能力较强,容易发生位错滑移,而当石墨烯嵌入高度较大时,石墨烯上下方的两部分镁基体的塑性变形能力相当,它们的塑性变形行为趋于同步.此外,本文对镁基体的相变机制也进行了详细分析.本文的研究结果对于设计高性能的石墨烯金属基复合材料具有一定的理论指导意义.     

Vibration analysis of defective graphene sheets using nonlocal elasticity theory

Many papers have studied the free vibration of graphene sheets. However, all this papers assumed their atomic structure free of any defects. Nonetheless, they actually contain some defects including single vacancy, double vacancy and Stone-Wales defects. This paper, therefore, investigates the free vibration of defective graphene sheets, rather than pristine graphene sheets, via nonlocal elasticity theory. Governing equations are derived using nonlocal elasticity and the first-order shear deformation theory (FSDT). The influence of structural defects on the vibration of graphene sheets is considered by applying the mechanical properties of defective graphene sheets. Afterwards, these equations solved using generalized differential quadrature method (GDQ). The small-scale effect is applied in the governing equations of motion by nonlocal parameter. The effects of different defect types are inspected for graphene sheets with clamped or simply-supported boundary conditions on all sides. It is shown that the natural frequencies of graphene sheets decrease by introducing defects to the atomic structure. Furthermore, it is found that the number of missing atoms, shapes and distributions of structural defects play a significant role in the vibrational behavior of graphene. The effect of vacancy defect reconstruction is also discussed in this paper.     

The effect of temperature,defect and strain rate on the mechanical property of multi-layer graphene: Coarse-grained molecular dynamics study

In this work, we investigate the effect of temperature, defect, and strain rate on the mechanical properties of multi-layer graphene using coarse-grained molecular dynamics (CGMD) simulations. The simulation results reveal that the mechanical properties of multi-layer graphene tend to be less sensitive to temperature as the layer increases, but they are sensitive to the distribution and coverage of Stone-Wales (SW) defects. For the same number of defect, there is less decline in the fracture stress and Young's modulus of graphene when the defects have a regular distribution, in contrast to random distribution. In addition, Young's modulus is less influenced by temperature and defect, compared to fracture stress. Both the fracture stress and Young's modulus have little dependence on strain rate.     

A molecular dynamics study of the mechanical properties of h-BCN monolayer using a modified Tersoff interatomic potential

Using molecular dynamics (MD) simulations, we investigate the mechanical properties of hexagonal BCN monolayer, a newly synthesized two-dimensional material with an atom ratio of B/C/N = 1:1:1. The Tersoff potential is modified to get good agreement between predicted and measured fracture strengths of graphene. With this modified Tersoff potential, we perform extensive MD simulations to study the effect of temperature, strain rate and vacancy defect on the mechanical properties of h-BCN. It is found that h-BCN is a strong material with fracture strength of 81.4–93.5 GPa, albeit ∼35% lower than that of graphene. Similar to graphene, temperature has strong effect on the mechanical properties of h-BCN. As the temperature increases from 10 K to 1300 K, the fracture strength and strain of h-BCN drops by 55% and 62%, respectively. The strain rate is found to have a moderate effect. When the strain rate increases from 0.00002 to 0.0125 ps⁻¹, the fracture strength and strain of h-BCN increases 6.1% and 12%, respectively. As for the atomic defect, a very small concentration (0.028%) of vacancy in h-BCN is able to cause a 28% reduction in fracture strength and a 35.5% reduction in fracture strain. These findings have significance for its future applications in nanodevices.     

Mechanical resonance properties of porous graphene membrane; simulation study and proof of concept experiment

Mechanical resonance properties of porous graphene resonators were investigated by simulation studies. The finite element method was utilized to design the porous graphene membrane pattern and to calculate the mechanical resonance frequency and quality factor. The changes in the resonance frequency and quality factor were systematically studied by changing the size, number, and relative location of pores on the graphene membrane. Mass loss and carbon-carbon bond break were found to be the main competing parameters for determining its mechanical resonance properties. The correlation between the geometry and the damping effect on the mechanical resonance of graphene was considered by suggesting a model on the damping factor and by calculating the membrane deflections according to the pore location. Based on the simulation results, an optimal porosity and porous geometry were found that gives the maximum resonance frequency and quality factor. Suspended graphene with various number pore structures was experimentally realized, and their mechanical resonance behaviors were measured. The trend of changes in resonance frequency and quality factor according to the number of pores in the experiment was qualitatively agreed with simulation results.     

Mechanical properties of thin films of graphene materials: A study on their structural quality and functionalities

Several studies have been done on physiochemical properties of thin films of graphene materials, but less on their mechanical properties. The mechanical properties such as tensile and storage modulus of films of graphene oxide (GO), different reduced graphene oxides (rGO), functionalised reduced graphene oxide (frGO) and a few layers graphene (graphene) were analysed in this study. During syntheses processes, a range of variations occurs due to different reducing agents and functionalising components used; this affects or changes the mechanical properties of the materials. In addition, it has become vital to comprehend the mechanical properties of these films as the potential applications such as sensor and electrodes demand extended life cycles or lifetime. It has been found that the ultimate tensile strength (UTS), tensile modulus, and storage modulus vary across all the samples that highly depend on nature/efficiency of reducing agent used, amount of impurities such as oxygen functional groups and defect density such as discrepancies/holes in the aromatic structure. The highest UTS and modulus have been identified with a few layers graphene and with hydroiodic acid reduced GO among the rGOs. The frGO shows almost similar properties to that of graphene.     

多晶石墨烯拉伸断裂行为的分子动力学模拟

采用分子动力学模拟方法研究了不同晶界对石墨烯拉伸力学特性及断裂行为的影响. 定义了表征晶界能量特性的新参量缺陷能, 并以此为基础分析了晶界结构的能量特性. 探讨了晶界对弹性模量和强度极限等的影响以及强度对晶界能量特性的依赖关系. 结果表明: 晶界能量特性可以间接反映晶界强度; 同时, 晶界中缺陷会使实际承载碳键数量小于名义承载碳键数, 从而在较大范围内影响弹性模量. 分析了不同晶界的断裂过程, 发现了裂纹扩展方向的强度依赖性: 低强度晶界主要是以碳键直接断裂为主要方式的沿晶断裂, 而高强度晶界通常是碳键直接断裂和Stone-Wales翻转过程交替进行下的穿晶断裂. 研究结果可为石墨烯器件的设计制造提供理论指导.     

Effects of Stone–Wales defect upon adsorption of formaldehyde on graphene sheet with or without Al dopant: A first principle study

The adsorption mechanisms of formaldehyde (H₂CO) on modified graphene, including aluminum doping, Stone–Wales (SW) defects, and a combination of these two, were investigated via density functional theory (DFT). It was found that the graphene with SW defect is more sensitive than that of perfect graphene for detecting H₂CO molecules. Compared with Al-doped graphene/H₂CO complex, the binding energy for Al-doped SW defect complex can be enhanced by the introduction of a SW defect. The large values of binding energy and net charge transfer for this complex indicate a strong chemisorption and a larger affinity with H₂CO for the modified graphene. Furthermore, the density of states (DOS) of the complex shows that the effect of defect–dopant combination on adsorption mechanisms is due to the orbital hybridization between the Al atom and its adjacent C atoms. In addition, it can be expected that adsorption of H₂CO on the surface of Al-doped SW defect may occur easily, and the Al-doped SW graphene is more suitable for H₂CO gas detection.     

单层单晶石墨烯与柔性基底界面性能的实验研究

单晶石墨烯具有更优异的力学及电学性能,有望成为新一代柔性电子器件的核心材料.因此,有必要从实验的角度精细分析化学气相沉积法制得的大尺度单晶石墨烯与柔性基底复合结构的界面力学行为.本文通过显微拉曼光谱实验方法测量了不同长度的单层单晶石墨烯/PET(聚对苯二甲酸乙二醇酯)基底的界面力学性能参数及其在长度方向上界面边缘的尺度效应.实验给出了石墨烯在PET基底加载过程中与基底间黏附、滑移、脱黏三个界面状态的演化过程与应力分布规律.实验发现,单晶石墨烯与柔性基底间由范德瓦耳斯力控制的界面应变传递过程存在明显的边缘效应,并且与石墨烯的长度有关.界面的切应力具有尺度效应,其值随石墨烯长度的增加而减小,而石墨烯界面传递最大应变以及界面脱黏极限则不受试件尺度的影响.     

Giant negative and positive lateral shifts in graphene superlattices

Electronic analogy of Goos-Hänchen shift has been well established and investigated in various graphene-based nanostructures, including p-n interface, single and double barriers. In this paper, we have studied the giant negative and positive lateral shifts of the transmitted electron beam through graphene superlattices. It is found that the lateral shifts, depending on the location of new Dirac point, can be negative as well as positive near the band edges of zero-k? (non-Bragg) gap. We have also achieved the enhanced opposite shifts in the graphene superlattice with defect layer, since such structure possesses the defect mode inside the zero-k? gap. The modulations of negative and positive lateral shifts by incidence angles, width and potential height of defect layer may lead to potential applications in the graphene-based electron wave devices.     

Graphene based photonic crystal optical filter: Design and exploration of the tunability

Optical characteristics of two new graphene based photonic crystals are studied in detail. A structure containing alternating layers of graphene and SiO₂ slabs is considered as the ideal crystal. The dependency of the photonic band gaps (PBGs) to the dielectric layer thickness and the period number is explored at first step. Potential of the proposed crystal to be used as an optical filter is then investigated. Adding a nonlinear electro-optic polymer as a defect layer, the alterations of the optical features are inspected. Results show that the defect layer insertion causes a resonant mode inside the PBGs. However, the location of the defect layer inside the crystal is very effective on both the frequency and width of the resonant mode. Tunability of the optical features is probed by taking into account of the dependencies to the wave incident angle, graphene chemical potential and the applied external voltage to the defect layer.