Observation and analysis of halo current in EAST

Plasma in a typically elongated cross-section tokamak （for example, EAST） is inherently unstable against vertical displacement. When plasma loses the vertical position control, it moves downward or upward, leading to disruption, and a large halo current is generated helically in EAST typically in the scrape-off layer. When flowing into the vacuum vessel through in-vessel components, the halo current will give rise to a large J × B force acting on the vessel and the in-vessel components. In EAST VDE experiment, part of the eddy current is measured in halo sensors, due to the large loop voltage. Primary experimental data demonstrate that the halo current first lands on the outer plate and then flows clockwise, and the analysis of the information indicates that the maximum halo current estimated in EAST is about 0.4 times the plasma current and the maximum value of TPF × Ih/Ip0 is 0.65, furthermore Ih/Ipo and TPF × Ih/Ipo tend to increase with the increase of Ip0. The test of the strong gas injection system shows good success in increasing the radiated power, which may be effective in reducing the halo current.     

Effect of Tensor Force on the Halo Structure of ^29Ne and ^31Ne

The structure of Ne isotopes has been investigated by using deformed Skyrme-Hartree-Fock （SHF） method and BCS approximation. Especially the effect of tensor force on the halo structure of 29Ne and 31Ne is discussed. To this end, the tensor contributions are considered to the energy density function and the single particle potential in SHF theory. For comparison, four Skyrme interactions are used： SLy5 and SGII without tensor force, and SLy5＋T and SGII＋ T with tensor force. The results indicate that the inclusion of tensor force shows a more pronounced halo structure for 31Ne.     

Calculation of Radii and Density of ^7-19B Isotopes Using Effective Skyrme Force

Abstract In this study, the proton and neutron densities, charge densities, rms nuclear charge radii, rms nuclear mass radii, rms nuclear proton, neutron radii, and neutron skin thickness are calculated by using Harfree-Fock method with an effective nucleon-nucleon Skyrme interactions with SⅠ, SⅡ, SⅣ, T3, SKM, and SKM^＊ parameters. These nuclear properties for the neutron-rich isotopes of B （Boron） are presented. The calculated results are compared with the experimental and theoretical results of other researchers.     

推广的Glauber理论及其在晕核散射中的应用

介绍了推广到晕核散射的Glauber理论,并用其研究晕核¹⁴Be的散射问题.弹核的密度分布分别采用谐振子密度分布和相对论平均场理论计算得到具有两个晕中子结构的密度分布,对晕核模型的多重积分采用蒙特卡洛数值积分方法.计算了不同能量下¹⁴Be,¹²Be与靶核¹²C散射的反应截面,并与实验结果进行比较,¹⁴Be的两个中子采用具有晕中子密度分布的理论计算与实验符合较好,而采用不具有晕中子密度分布的结果与实验值相差较大.     

A microscopic three-cluster model in the hyperspherical formalism

The hyperspherical formalism is applied in the framework of the microscopic generator-coordinate method. Three-cluster systems are described with a single generator coordinate, the hyperradius. This model is a natural extension of previous microscopic theories, and can be applied to bound states and resonances in a range of nuclei exhibiting a cluster structure. As an illustrative example, the model is applied to ⁶He and ⁶Li. Density distributions and electric dipole transition strengths are calculated, including B(E2;0⁺→2⁺) in ⁶He. The results are consistent with a neutron halo structure for the ground state of ⁶He, and with a proton–neutron halo structure of its isobaric analog state in ⁶Li. No 1⁻ “soft dipole” resonance is found in ⁶He.     

Extended Glauber Theory and Its Application in Halo Nucleus Scattering

We introduced an extended Glauber theory for a halo nucleus scattering, where the halo nucleons and the nuclear core were treated separately. Expressions of reaction and interaction cross sections of the halo nucleus scattering were derived. We took the halo structure of the projectile nucleus into account and adopted an improved optical limit approximation. In the framework of the extended Glauber theory, we studied the reaction cross section for the halo nucleus ¹⁴Be scattering on a target ¹²C. For comparison, the reaction cross sections of ¹²Be+¹²C were calculated as well. The density distribution of target ¹²C is taken from experiments, and those of the projectiles ¹²Be and ¹⁴Be were obtained by two methods. One is that the harmonic oscillator wave functions for ¹²Be and ¹⁴Be are used. The length of harmonic oscillator is adjusted to reproduce the reaction cross section of ¹²Be+¹²C at the high energy E=790MeV/u . The density distribution of ¹⁴Be was also calculated self-consistently in the relativistic mean field (RMF) theory, with a long tail wave functions for the two neutrons in ¹⁴Be. It was found that the calculated reaction cross sections for ¹²Be+¹²C at E=790MeV/u and E=56.5MeV/u were in good agreement with the experimental data no matter harmonic oscillator or RMF wave functions were used. In contrast, the experiments of the reaction cross sections for ¹⁴Be+ ¹²C could only be reproduced when the wave functions of two 2s_1/2 neutrons spreaded over with a long tail. It comes to a conclusion that two outside neutrons in ¹⁴Be form a halo structure.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

Coordinated Control of Multi-Agent Systems with a Varying-Velocity Leader and Input Saturation

In this paper, we investigate a leader-following tracking problem for multi-agent systems with bounded inputs. We propose a distributed bounded protocol for each follower to track a leader whose states may not be completely measured. We theoretically prove that each agent can follow the leader with estimable track errors. Finally, some numerical simulations are presented to illustrate our theoretical results.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Status of KLOE-2

In a few months the KLOE-2 detector is expected to start data taking at the upgraded DAФNE φ-factory of INFN Laboratori Nazionali di Frascati. It aims to collect 25 fb^-1 at the φ（1020） peak, and about 5 fb^-1 in the energy region between 1 and 2.5 GeV. We review the status and physics program of the project.     

A Bi-Hamiltonian Lattice System of Rational Type and Its Discrete Integrable Couplings

By considering a new discrete isospectral eigenvalue problem, a hierarchy of lattice soliton equations of rational type are derived. It is shown that each equation in the resulting hierarchy is integrable in Liouville sense and possessing bi-Hamiltonian structure. Two types of semi-direct sums of Lie algebras are proposed, by using of which a practicable way to construct discrete integrable couplings is introduced. As applications, two kinds of discrete integrable couplings of the resulting system are worked out.     

On Camassa-Holm Equation with Self-Consistent Sources and Its Solutions

Regarded as the integrable generalization of Camassa-Holm （CH） equation, the CH equation with self-consistent sources （CHESCS） is derived. The Lax representation of the CHESCS is presented. The conservation laws for CHESCS are constructed. The peakon solution, N-soliton, N-cuspon, N-positon, and N-negaton solutions of CHESCS are obtained by using Darboux transformation and the method of variation of constants.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Measurements of the γγ＊ → π^0 and γγ＊ → ηc transition form factors at BABAR

We present measurements of the γγ＊ → π^0 transition form factor for the momentum transfer range Q^2=4-40 GeV^2 and the γγ＊ → ηc transition form factor for the range Q^2=2-50 GeV^2. The current status of measurements of the meson-photon transition form factors for the η and η＇ mesons is discussed. The results of the measurement of the ηc mass, total and two-photon widths are also presented.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

Study of spin sum rules （and the strong coupling constant at large distances）

We present recent results from Jefferson Lab on sum rules related to the spin structure of the nucleon. We then discuss how the Bjorken sum rule with its connection to the Gerasimov-Drell-Hearn sum, allows us to conveniently define an effective coupling for the strong force at all distances.