多电子激发态离子的自由离衰变处理方法

在分析当前描述离子与原子碰撞的经典理论模型的基础上,详细讨论了处理多电子激发态自电离衰变问题的一些新的思路,把高电荷态离子与原子碰撞反应中的电子转移过程分为四阶段描述,并依据能量守恒原理,规范了处理多电子激发态离子发生自电离衰变的规则,自洽地解决碰撞中间过程中俘获多电子后的离子发生自电离向末态衰变的问题,并分析和比较了新的计算结果与实验结果。     

低能He2+-He碰撞体系转移电离机理的实验研究

利用冷靶反冲离子动量谱仪,对低能He²⁺-He碰撞反应中产生的反冲靶离子和炮弹离子进行了符合测量,根据反冲靶离子的动量,研究了转移电离过程中的电荷转移机理.实验结果表明：在20—40 keV能量范围内,靶原子上的一个电子俘获到炮弹离子的基态,另一个电子直接发射到靶的连续态的直接电离及另一个电子俘获到炮弹离子的连续态的过程(ECC)是最主要的转移电离机理,且ECC过程主要发生在大碰撞参数条件下;炮弹离子俘获两个电子处在双激发态的自电离过程的贡献很小. 关键词： 冷靶反冲离子动量谱仪 转移电离机理 离子原子碰撞     

用速度影像技术研究Eu原子6p_(1/2)8s的自电离衰变的分支比

本文采用速度影像技术对Eu原子的自电离弹射电子的动力学过程进行了系统研究.实验采用三步孤立实激发方法分步从基态4f76s6s8S7/2经中间态4f76s6p6P5/2激发到4f76s8s8P7/2Rydberg态上,然后将其进一步共振激发至4f76p1/2(J=3)8s和4f76p1/2(J=4)8s自电离态.根据所用的激发路径及其选择定则可以得出自电离态的总角动量的可能取值;通过自电离过程能量守恒和角动量守恒原理推测自电离衰变对应的离子终态信息.利用电子透镜对上述自电离过程中产生的弹射电子进行聚焦和成像,通过位置敏感探测器对其动能进行分辨,运用速度影像技术进行数学变换和计算得到弹射电子的能量分布,分析并给出Eu原子自电离衰变分支比.同时通过调谐第三步激光的波长,得出了分支比随光子能量的变化规律,探讨了实现Eu离子粒子数反转的可能性.     

C3+与Ne碰撞过程纯电离绝对截面的测量和研究

介绍了离子-原子碰撞过程中双微分绝对截面的计算方法.利用符合技术测量了中能区C³⁺+Ne碰撞系统的纯电离微分绝对截面. 将实验结果与多体经典蒙特卡罗方法计算结果进行对比后发现，纯电离截面随入射能量变化的趋势基本一致，对理论与实验产生差异的原因作了分析. 对多重电离的电离机制分析表明：高价态的反冲离子主要来自于俄歇贡献；随着入射能量的升高，电子-电子间的库仑作用也逐渐显现. 此实验方法可以用于相同实验装置上的各种反应出射道的绝对截面测量，入射离子种类及入射离子能量范围将得到拓展. 关键词： 离子-原子碰撞 绝对截面 纯电离     

基于双激发态对稠密等离子体中双电子复合速率系数的研究

讨论了稠密等离子体中双电子复合速率系数的计算方法,推导出了在双激发态间跃迁过程和关于双激发态的碰撞电离和自电离过程的影响下双电子复合速率系数作为关于电子密度函数的计算公式,并以类氖镍离子为例进行了计算.计算结果展示了双电子复合速率系数随电子密度增大的具体变化趋势.此外,还给出了在不同原子过程影响下双电子复合速率系数的数据,并进行了分析.     

强扰动区C~(q+)离子与He原子碰撞中有效电荷研究

本文利用经典过垒电离模型(Class Over Barrier Ionization)处理100-400ke V/amu强扰动区(q/v1)的不同价态非全裸离子Cq+(q=1-4)与全裸离子H1+,He2+,Li3+与He原子碰撞过程.发现相同价态下,全裸离子的双单电离截面比R21明显低于非全裸离子,原因在于两者的电子结构明显不同.非全裸离子的外壳层电子在碰撞过程中会有一定几率过垒,这在以往的研究中并未考虑.利用模型计算结果与实验数据的比对,估计入射离子第二有效电荷,最终确定入射离子在电离过程中的第一和第二有效电荷.     

C3+与Ne碰撞过程纯电离绝对截面的测量和研究

介绍了离子-原子碰撞过程中双微分绝对截面的计算方法.利用符合技术测量了中能区C3++Ne碰撞系统的纯电离微分绝对截面.将实验结果与多体经典蒙特卡罗方法计算结果进行对比后发现,纯电离截面随入射能量变化的趋势基本一致,对理论与实验产生差异的原因作了分析.对多重电离的电离机制分析表明:高价态的反冲离子主要来自于俄歇贡献;随着入射能量的升高,电子-电子间的库仑作用也逐渐显现.此实验方法可以用于相同实验装置上的各种反应出射道的绝对截面测量,入射离子种类及入射离子能量范围将得到拓展.     

Eu原子4f~76p_(1/2)ns自电离过程的动力学特性

采用孤立实激发与速度影像技术相结合的方法,研究了Eu原子4f~76p_(1/2)ns(n=7,9)自电离过程的动力学特性,包括弹射电子的角分布和向各离子态衰变的分支比.首先,采用孤立实激发技术将Eu原子分步从基态4f~76s~2经中间态4f~76s6p激发至4f~76sns Rydberg态,并通过第三步跃迁4f~76s~+→4f~76p_(1/2)~+。将其激发至4f~76p_(1/2)ns自电离态.其次,运用速度影像技术对上述自电离过程进行探测,并通过一系列数学变换计算出该过程的弹射电子的能量分布和角向分布本文不仅分析和比较了各个态自电离衰变的分支比和各向异性参数随光子能量的变化规律,还深入讨论了它们与自电离光谱之间的对应关系.最后,依据自电离衰变的分支比,探讨了实现Eu离子粒子数反转的可能性,为实现自电离激光器提供了有价值的信息     

实验室光致电离等离子体中激发过程的研究

光致电离等离子体在宇宙中广泛存在于强辐射场附近. 近年来随着高能量密度实验装置的发展, 在实验室内也能构造出光致电离等离子体. RCF是一个基于The Flexible Atomic Code 数据的针对光致电离等离子体的辐射碰撞模型, 该模型模拟了两个光致电离实验, 其 理论结果中电离态分布和光谱与测量值符合得很好. 在理论模拟中发现, 光致电离等离子体中光致激发和碰撞激发过程对离子态布居和发射光谱都有非常重要的影响. 光致激发过程可以通过将离子激发到双激发态从而间接电离离子; 碰撞激发过程会因为电子将基态离子激发到电离截面小的单激发态而抑制光子对等离子体的电离. 光致激发过程可以加强类锂离子的类氦离子的卫线, 而碰撞激发过程会影响类氦离子谱线的线强之比.     

低电荷态离子原子碰撞过程中的转移电离机理的研究

介绍了使用位置灵敏技术和飞行时间方法研究中低能低电荷态离子-原子碰撞过程中转移电离与单电子俘获过程.对于确定的入射离子电荷态,通过理论分析及与实验数据对比给出了转移电离与单电子俘获截面比R_TS随着入射离子速度V_P的变化规律和转移电离过程中电离的电子主要来自靶原子的最外亚壳层. 关键词： 转移电离 逃离半径 电离半径 俘获半径     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.