ZnO电子结构和p型传导特性的第一性原理研究

基于密度泛函理论(DFT)框架下的第一性原理平面波超软赝势方法(USPP)，对不同掺杂情况的ZnO晶体几何结构分别进行了优化计算，从理论上给出了ZnO的晶胞参数，得到了ZnO的总体态密度(TDOS)和氮原子2p态的分波态密度(PDOS).计算结果表明：原胞体积随着掺杂比例的提高而逐渐减小；将氮铝按照2∶1的原子比例共掺可以使氮的掺杂浓度比只掺杂氮时明显提高，且随着铝在锌靶中掺入比例的增加，载流子迁移率提高，浓度增大，使得p型ZnO电导率提高，传导特性增强. 关键词： 共掺 p型传导 态密度 第一性原理     

MOCVD法生长Ga、P掺杂的ZnO薄膜

采用金属有机化学气相沉积法在蓝宝石衬底上制备Ga、P掺杂的ZnO薄膜,分别采用X射线衍射、扫描电子显微镜、霍尔效应测试、光致发光谱对样品进行表征。通过Ga、P掺杂分别得到n、p型ZnO薄膜,n型ZnO薄膜的载流子浓度可以达到1×1019cm-3,p型ZnO薄膜的载流子浓度达到1.66×1016cm-3。所制备的ZnO薄膜具有c轴择优生长取向,并且p型ZnO薄膜具有较好的光致发光特性。     

Li掺杂ZnO纳米棒的导电和发光特性(英文)

利用气相输运方法,在(111)面硅衬底上制备了名义上原子数分数为2%的Li掺杂的ZnO纳米棒(样品A)。作为比较,我们在相同的生长条件下制备了没有任何掺杂的ZnO纳米棒(样品B)。XRD分析测试表明:样品A和样品B中的ZnO纳米棒具有纤锌矿六边形结构,没有其他氧化物,例如Li2O。Hall效应测量表明:样品A导电类型为p型,空穴载流子浓度为6.72×1016cm-3,空穴载流子迁移率为2.46 cm2.V-1.s-1。样品B为n型,电子载流子浓度为7.16×1018cm-3,电子载流子迁移率为4.73 cm2.V-1.s-1。低温光致发光光谱测试表明,样品A和样品B发光峰明显的区别是位于3.351 eV(样品B)和3.364 eV(样品A)处。根据文献报道,在没有掺杂的ZnO中,3.364 eV发光峰源于施主束缚激子发光。通过变温光致发光光谱的测试,证明了在样品A中,位于3.351 eV的发光峰源于受主束缚激子发光,其光学受主能级位于价带顶142meV处。     

通过交替生长气氛调控N掺杂ZnO薄膜电学特性

使用分子束外延方法在c面蓝宝石衬底上生长了系列氮掺杂ZnO薄膜样品。在连续的富锌气氛环境中生长的样品,由于存在大量的施主缺陷,呈现n型电导。为了抑制施主缺陷带来的补偿效应,在生长过程中,通过周期性补充氧气,形成周期性的富氧气氛,缓解了氮掺杂浓度和施主缺陷浓度之间的矛盾。光致发光测量表明,通过交替生长气氛,氧空位和锌间隙等缺陷在薄膜中得到了显著抑制。通过交替生长气氛生长的外延薄膜的结晶质量也有所提高。样品显示出重复性较高的p型电导,载流子浓度可达到10¹⁶ cm^-3。周期性补氧调节生长气氛的生长方式是一种有效实现p型掺杂ZnO的方法。     

高压下Li掺杂p型ZnO固溶体的表征

报道了利用ZnO和Li₂O混合物在5GPa, 1200 ℃—1500 ℃条件下, 制备Li掺杂p型ZnO(记作ZnO: Li)固溶体的过程. 研究发现, 高压下温度对于ZnO: Li固溶体的导电类型以及结构具有较大的影响. 其中在1500 ℃条件下烧结的ZnO: Li(Li的掺杂量4.5%)表现出良好的p型电学性能, 其电阻率为3.1× 10^-1Ω·cm, 载流子浓度为3.3× 10¹⁹cm^-3, 迁移率为27.7cm²·V^-1·s^-1. 通过实验及理论计算确定了其受主能级为110meV, 讨论了压力对p型ZnO的形成和电学性能的影响.     

在不同衬底温度下用直流反应磁控溅射法制备p型ZnO薄膜

采用直流反应磁控溅射方法,通过改变衬底温度并优化生长参数,在玻璃衬底上生长了In-N共掺p型ZnO薄膜。X射线衍射(XRD)测试表明,所得薄膜结晶性能良好,且具有很好的c轴择优取向。Hall测试的结果所得p型ZnO薄膜最低电阻率为35.6Ω·cm,霍尔迁移率为0.111cm2·V-1·s-1,空穴浓度为1.57×1018cm-3。X光电子能谱(XPS)测试表明,铟元素已有效地掺入了ZnO薄膜中,且铟元素有效地促进了氮元素的掺入。紫外可见(UV)透射谱测试表明,在可见光范围内所有薄膜透光率均可达90%。     

迁移率对单层有机发光器件中电场与载流子分布的影响

有机发光器件的宏观特性与有机层中的电场和载流子浓度分布密切相关。建立的有机电致发光器件模型是由两个金属电极中间夹一层有机发光薄膜材料组成的单层器件,金属与有机发光层之间为欧姆接触。模型以载流子运动的扩散-漂移理论为基础,利用数值方法研究了有机发光层中双极载流子注入时的电势、电场、载流子浓度和复合密度分布。分析结果表明:当两种载流子的迁移率相同时,电场强度、载流子浓度、复合密度的分布呈对称形式。而当电子和空穴的迁移率μn和μp相差比较大时,高迁移率的载流子不仅仅分布在注入端附近而且还有一小部分能够传输到另一端,而低迁移率的载流子只分布在其注入端附近;当μn、μp的大小相差不大时,载流子传输情况就介于两者之间。当μn/μp的比值变化时,电场强度的极大值向载流子迁移率小的注入端偏移。     

分子束外延方法生长p型氧化锌薄膜

用等离子辅助分子束外延 (P MBE)的方法 ,在蓝宝石c 平面上外延生长了p型氧化锌薄膜。在实验中采用高纯金属锌作为Zn源、NO作为O源和掺杂源 ,通过射频等离子体激活进行生长。在生长温度 30 0℃ ,NO气体流量为 1.0sccm ,射频功率为 30 0W的条件下 ,获得了重复性很好的p型ZnO ,且载流子浓度最大可达 1.2× 10 19cm-3 ,迁移率为 0 .0 5 35cm2 ·V-1·s-1,电阻率为 9.5Ω·cm。     

P型半导体氧化锌薄膜的Raman光谱研究

本文主要对超声喷雾热解方法生长在本征Si衬底上的N－In共掺的p型ZnO薄膜的Raman光谱进行了研究。通过洛仑兹(Lorentz)模型和等离子激元与纵光学声子耦合模理论模型拟合不同浓度下的室温Raman光谱, 我们对样品的Raman峰进行了指认; 同时也得到了样品的空穴浓度和迁移率, 结果和霍耳测量得到的空穴浓度和迁移率符合的较好, 证明了霍耳测量p型ZnO薄膜得到的电学参数是可信的。随后我们又对不同浓度的p型ZnO薄膜的变温Raman光谱进行研究,运用一个详细的模型(考虑了晶格热膨胀、残余应力、和三声子、四声子衰变)描述不同浓度下各个样品Raman光谱中的等离子激元与纵光学声子耦合模随温度变化的情况。分析拟合参数, 可以清楚地了解随着浓度的增加耦合模参数随温度的衰变行为。     

氢等离子体处理对ZnO光电性质的影响

借助于霍尔效应、拉曼散射、光致发光及电致发光测试技术,研究了氢等离子体处理以及随后的高温退火过程对ZnO薄膜及ZnO纳米棒光学及电学性质的影响.实验结果表明:氢在ZnO薄膜中不仅充当浅施主,而且还可以钝化晶界处缺陷相关的非辐射复合中心,从而使得载流子浓度及迁移率增大,近带边紫外发光增强.然而,钝化晶界的氢热稳定性较差,500℃时已经完全扩散出ZnO薄膜,因此,500℃退火后载流子迁移率及近带边紫外发光强度迅速减弱.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.