A New Simple Ultrahigh Speed Decoding Algorithm for BCH Code

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　Ｍｏｄｅｒｎｄｉｇｉｔａｌｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍｓｏｆｔｅｎｒｅｑｕｉｒｅｅｒｒｏｒ ｆｒｅｅｔｒａｎｓｍｉｓｓｉｏｎ .Ｅｒｒｏｒｃｏｎｔｒｏｌｃｏｄｉｎｇｔｅｃｈｎｏｌｏｇｙｈａｓｂｅｅｎｕｓｅｄｗｉｄｅｌｙｉｎｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍ .Ａｎｄｉｔｈａｓｂｅｅｎｉｍｐｒｏｖｉｎｇｔｈｅｐｅｒｆｏｒｍａｎｃｅｏｆｃｏｍｍｕｎｉｃａｔｉｏｎｓｙｓｔｅｍ ｇｒｅａｔｌｙ ,ｅｓｐｅｃｉａｌｌｙｉｎｗｉｒｅｌｅｓｓｃｏｍｍｕｎｉｃａｔｉｏｎｓｓ…     

Dynamical phase alignment of sampling clock in optical performance monitoring system

In an optical performance monitoring system for high-speed optical communications, the ultra-short optical pulse from the laser is divided into two parts. One is to sample high-speed optical communication signal and the other as the sampling clock in an analog/digital converter(ADC) after detecting using a photon-detector. We propose a simple method based on variance calculation to align the phase of sampling clock in an ADC. The experiments demonstrate that, with the proposed method, the eye diagram or constellation diagram of high-speed optical communication signal can be reconstructed by the optical performance monitoring system.     

高速相干光通信系统中的自适应步长恒模算法

对于高速光通信系统中的相干检测来说,盲均衡是一项常用的恢复传输符号的技术。目前应用最广泛的盲均衡算法是恒模算法,但是一方面它不能兼顾收敛速度和收敛精度,另一方面在偏分复用系统中很容易陷入奇异性。因此提出了一种改进型的恒模算法———自适应步长恒模算法,并在112Gb/s偏分复用16进制正交幅度调制系统中对提出的算法进行了测试。与传统的恒模算法相比,改进后的算法收敛速度仅为恒模算法的1/20;收敛稳定后误差函数的方差比恒模算法降低了0.7dB;对偏分复用系统中的奇异性有很好的抵抗能力;在不考虑奇异性问题时,光信噪比代价与恒模算法相比降低了1.5dB。     

光纤偏振模色散对信号偏振度的影响

采用一种简化的线路传输模型，详细讨论了在高速光纤通信系统中，线路偏振模色散（PMD ），尤其是二阶PMD、输入信号偏振态等对信号偏振度（DOP）的影响，并指出以信号DOP做 反馈控制信号适合于一阶PMD优化补偿系统，但在较大二阶PMD的影响下，将增加控制算法的 复杂性，使系统可能陷入局部最优解. 关键词： 信号偏振度 偏振模色散 信号偏振态     

基于PAM4制的高速垂直腔面发射激光器研究进展

短距离光互联技术在云计算、5G通信、物联网技术等方面有重要的商业应用价值。基于高速垂直腔面发射激光器(Vertical-cavity surface-emitting laser,VCSEL)与多模光纤组成链路、采用直接调制检测、并使用如四电平脉冲幅度调制(Four-level pulse amplitude modulation,PAM4)等的高阶调制模式是现阶段短距离光互联链路方案的首选。本文首先介绍了短距离光互联应用的研究现状;第二部分介绍了VCSEL的发展、结构以及动态参数;第三部分介绍了PAM4调制方法及伴随使用的各种电子技术(均衡,前向纠错,脉冲整形);第四部分介绍了提高单链路速率的波分复用(Wavelength division multiplexing,WDM)技术;最后对以高速VCSEL、多模光纤、直接调制检测、PAM4调制以及波分复用技术的短距离光互联方案应用前景做了总结和展望。     

Dispersion compensation in an open-loop all-optical chaotic communication system

The optical chaotic communication system using open-loop fiber transmission is studied under strong injection conditions. The optical chaotic communication system with open-loop configuration is studied using fiber transmission under strong injection conditions. The performances of fiber links composed of two types of fiber segments in different dispersion compensation maps are compared by testing the quality of the recovered message with different bit rates and encrypted by chaotic modulation (CM) or chaotic shift keying (CSK). The result indicates that the performance of the pre-compensation map is always worst. Two types of symmetrical maps are identical whatever the encryption method and bit-rate of message are. For the transmitting and the recovering of message of lower bit rate (1 Gb/s), the post-compensation map is the best scheme. However, for the message of higher bit rate (2.5 Gb/s), the parameters in communication system need to be modified properly in order to adapt to the high-speed application. Meanwhile, two types of symmetrical maps are the best scheme. In addition, the CM method is superior to the CSK method for high-speed applications. It is in accordance with the result in a back-to-back configuration system.     

A method of developing wavelength encoded all-optical S–R flip-flop by the uses of semiconductor optical amplifier based Mach–Zenhder interferometer and phase conjugation system

A scheme for a high-speed wavelength encoded all-optical S–R flip-flop (or a digital memory cell for storing of optical bits) based on wavelength conversion (MZI) in semiconductor optical amplifier (SOA) and phase conjugation system (PCS) is proposed. The switching action of semiconductor optical amplifier (SOA) does not give too high operational speed because of electrical pumping power. But optical phase conjugation mechanism gives us ultrahigh operational speed. So, joint use of them gives rise to a more high speed system comparatively to only SOA based switches. Here two logic states of the whole system is encoded by two wavelengths as well as frequencies, since the information in the bit is unaffected throughout the communication not having regard to the loss of light energy due to reflection, refraction polarization, etc.     

Design and fabrication of AlGaAs/GaAs phase couplers for optical integrated-circuit applications

As integrated electronic circuits based on GaAs are getting faster and more complex and the relatively new fiber optic communication industry is expanding into new markets, such as shipboard communication links, the need for high-speed optical signal processing in a GaAs-based system has become increasingly evident. The economy and flexibility of fabricating both electronic and optical circuits on the same wafer promises significant increases in the computing power and speed of large distributed systems (those involving more than a few medium-density chips). The obvious medium for integration of optics with electronics is GaAs. High-speed ICs utilizing GaAs MESFETS are already in the marketplace, as are GaAs/AlGaAs laser diodes and detectors. Thus the two building blocks exist and only wait to be stacked together in a useful manner. What must hold these together is any combination of passive waveguides, modulators, switches, or optical fibers which will provide high-speed links between several electronic systems. It does not matter that these systems may be miles apart or on the same wafer: the interconnecting optical circuits are the same except for the possible insertion of an optical fiber.     

Design and fabrication of AlGaAs/GaAs phase couplers for optical integrated-circuit applications

As integrated electronic circuits based on GaAs are getting faster and more complex and the relatively new fiber optic communication industry is expanding into new markets, such as shipboard communication links, the need for high-speed optical signal processing in a GaAs-based system has become increasingly evident. The economy and flexibility of fabricating both electronic and optical circuits on the same wafer promises significant increases in the computing power and speed of large distributed systems (those involving more than a few medium-density chips). The obvious medium for integration of optics with electronics is GaAs. High-speed ICs utilizing GaAs MESFETS are already in the marketplace, as are GaAs/AlGaAs laser diodes and detectors. Thus the two building blocks exist and only wait to be stacked together in a useful manner. What must hold these together is any combination of passive waveguides, modulators, switches, or optical fibers which will provide high-speed links between several electronic systems. It does not matter that these systems may be miles apart or on the same wafer: the interconnecting optical circuits are the same except for the possible insertion of an optical fiber.     

The study of underwater acoustic communication technology based-on the acoustic vector sensor

Underwater acoustic (UWA) communication based on an acoustic vector sensor is studied. The method of joint weighted sound pressure and velocity processing is used in phase modulation high-speed UWA communication system combined with coherent demodulation and adaptive equalization algorithm to demodulate and decode. Whereas the sound intensity could be used instead of pressure for frequency decoding in frequency modulation UWA communication system. The results of theory analysis, simulation calculations and lake trials have shown that either in phase modulation or in frequency modulation UWA communication system, the processing gain can be evidently increased, so that the BER (bit error rate) can be effectively reduced and the telemetry distance can be enlarged by using the acoustic vector sensor.     

新型高速光发射模块的设计与分析

介绍了用于高速、宽带光纤通信系统的铌酸锂(LiNbO3)光发射模块的优化设计方法。分析比较了半导体器件与铌酸锂波导器件在作为光纤通信光发射模块时的优缺点。对光发射模块的两个主要器件———掺铒铌酸锂(Er∶LiNbO3)波导激光器和LiNbO3电光调制器进行了结构设计和分析。分析和讨论了电光调制器带宽及半波电压随器件主要参数的变化关系。用BPM软件模拟了所设计的模块的结构特征。该发射模块的发射峰值波长为1531nm,调制速率为10Gbits/s。     

40 Gb/s光时分复用系统中两级偏振模色散自适应补偿实验研究

偏振模色散效应严重制约着长距离高速光纤通信的发展,偏振模色散的自适应补偿成为光通信领域研究的焦点。利用两阶段偏振模色散补偿器,采用6个自由度的粒子群优化算法(PSO),通过在线监测搜索光纤链路信号的偏振度极值作为反馈控制信息,在40Gb／s归零码高速光纤传输链路中成功实现了ms量级的偏振模色散自适应补偿。补偿前后采用庞加莱球法测量光纤链路中偏振模色散量,测量结果表明在信号中心波长1560．5nm处,差分群时延补偿前后测量值分别为21ps和1．3ps,而二阶偏振模色散补偿前后测量值分别为266ps^2和43．5ps^2。补偿后实验链路中的一阶和二阶的偏振模色散同时得到不同程度的补偿,并且系统的总的功率代价在误码率为10^-9时小于1dB。     

三种结构的光分插复用器特性比对研究

 针对电交换路由成为全光网通信和密集波分复用等高速信息传递网的电子瓶颈的现状,开展对全光光分插复用器的理论和实验研究。介绍了基于Mach-Zehnder干涉仪和FBG结构、基于FBG和光环行器结构以及一体化光纤光栅耦合器结构的光分插复用器的工作原理,实际构建了3种结构的光分插复用器,并分别搭建测试系统进行了单波长光信号上/下行实验研究,对比了这3种光分插复用器结构的性能和优缺点,为全光光分插复用器的设计制作提供了参考。     

高频半导体激光器组件及其特性的研究

本文使用ＤＣ－ＰＢＨ型激光二极管芯片，设计制作了实用化封装形式的激光器组件；在理论上和实验上研究了组件的封装模型和小信号频率调制特性，其光响应３ｄＢ带宽大于１．８ＧＨｚ。该器件可满足六次群的光通信系统的带宽要求，也可用于ＧＨｚ级的微波副载波光通信系统。     

高频半导体激光器组件及其特性的研究

本文使用DC-PBH型激光二极管芯片,设计制作了实用化封装形式的激光器组件;在理论上和实验上研究了组件的封装模型和小信号频率调制特性,其光响应3dB带宽大于1.8GHz.该器件可满足六次群的光通信系统的带宽要求,也可用于GHz级的微波副载波光通信系统。     

光数字相干接收机中色散补偿模块设计与优化

在高速光纤通信数字相干接收系统中,色散补偿模块的结构和性能将直接决定其是否具有实用价值.设计了比传统的有限脉冲响应(FIR)滤波器结构简单的偶对称型FIR滤波器,并通过数值仿真分析了FIR滤波器长度选取对补偿效果的影响.研究结果表明,在接收端光信噪比(OSNR)代价不高于1 dB的情况下,FIR滤波器长度折衷选取为最大...     

基于VCSEL的高速光收发模块研究

基于垂直腔面发射激光器(VCSEL)的高速光模块在现代光通信系统中的应用已越来越广泛。本文在简单介绍光收发模块和VCSEL器件的基础上，着重讨论了GBIC模块的总体设计和主要技术关键。     

高陡度薄壁光学零件在位测量与评价方法研究北大核心CSCD

为了满足空气动力学要求,采用共形薄壁结构的整流罩或光学窗口成为未来高速飞行器的发展趋势。但是这类零件在加工过程中,切削力会随着轴向位置发生改变,一次加工难以达到精度要求,需要通过在位测量、补偿加工来控制切削力变化所引起的面形误差。以超精密车床作为运动平台,设计高陡度薄壁光学零件的在位检测系统,研究测点分布的优化算法,实现测量效率和测量精度的统一;建立热变形误差修正模型,提高高陡度薄壁光学零件在位测量的精度。针对某型高陡度薄壁头罩,通过在位测量为补偿加工提供指导,将头罩表面误差由峰谷比(peak-tovalley,PV)3.1μm控制到PV 0.7μm,将同轴度控制到1.02μm,满足光学系统的性能要求。     

泵浦光和信号光之间的相位漂移对级联PSA光传输系统传输性能影响的研究

本文研究相敏光放大器(PSA)中泵浦光相位不能完全跟踪信号光相位时,即两者之间存在相位漂移时,对以PSA作为光中继放大器的高速光纤通信系统传输性能的影响.通过计算机系统仿真,我们得到在不同的相位漂移下,高速信号脉冲眼图劣化度随光纤色散变化的曲线,以及不同传输速率下信号眼图劣化度随放大器相位漂移量变化的曲线.由仿真结果可知,如相位漂移控制在一定范围内,其对系统性能几乎没有影响.但超出此范围时,则系统性能迅速劣化.     

低密度奇偶校验码在光通信中的性能

低密度奇偶校验码(LDPC)不仅有逼近香农限的良好性能, 而且译码复杂度较低, 结构灵活, 是近年信道编码领域的研究热点, 在光通信系统中有广泛的应用前景。针对非规则Tanner图上构造的低密度奇偶校验长码具有良好的性能, 以及其在光通信系统中的应用, 构造了几种LDPC码, 并采用置信传播(BP)译码, 在加性高期白噪声(AWGN)信道、二相移相键空(BPSK)调制下进行了计算机仿真。根据规则LDPC码和非规则LDPC码的误码率(BER)和FER曲线, 对规则码和非规则LDPC码在编译码方面以及性能方面作了分析和比较, 进而对构造在光通信系统中具有实用价值的LDPC码提出了看法。通过理论分析与仿真结果表明LDPC 码型具有良好的性能, 可以节省硬件开销, 比较适用于光通信系统中, 可作为超强前向纠错码型的候选码。