Sb2Te3 纳米结构的制备与表征

以室温热电性能优异的传统热电材料Sb₂Te₃为研究对象,利用化学气相沉积法制备Sb₂Te₃单晶纳米结构,并研究其生长机理.实验结果表明,不加催化剂时Sb₂Te₃易生长成六方纳米盘,在金催化剂条件下定向生长成纳米线.Sb₂Te₃的形貌与其晶体结构和生长机理有关.Sb₂Te₃为三角结构,Sb和     

Bi2Te3 合金低温热电性能及冷能发电研究

利用机械合金化和冷压烧结法制备得到n型和p型Bi₂Te₃基热电材料,在80—300 K温度范围测量了电导率、Seebeck系数,结果表明其具有良好的低温热电性能.采用Bi₂Te₃基热电材料制备出半导体热电器件,并配合附属设备搭建出一套半导体温差发电装置.利用液氮汽化时释放的冷能,对半导体热电器件的发电性能进行实验研究,得出这种半导体热电器件输出电压、输出功率与电流关系式,测得最大的输出功率达到1.33 W,从而证明了冷     

复合层状Bi7Ti4NbO21铁电陶瓷的结构与介电和压电性能研究

制备了Bi₇Ti₄NbO_{21，Bi4Ti3O12及Nb掺杂Bi4Ti3O12(Nb-Bi4Ti3O12)层状结构铁电陶瓷材料.结合Nb-Bi 4Ti3O12的介电温谱和 退极化实验结果，研究了Bi7Ti4NbO21的晶体结构 对其介电、压电性能的影响 .高分辨透射电镜结果表明，在Bi7Ti4NbO21中， 沿着c轴方向，(Bi2Ti3O10)^2-和(BiTiNbO7)^2-两个类钙钛矿层分别 与(Bi2O2)²⁺层叠加堆积而成.这种晶体结构决定了Bi7Ti4NbO21的 介电温谱在668℃和845℃出现介 电双峰.结合极化样品的退化实验分析，说明材料在这两个温度附近发生了铁电—铁电相变 、铁电—顺电相变，分别是(Bi2Ti3O10)^{2-< /sup>和(BiTiNbO7)2-层状 结构发生微观结构相变的结果.在退极化过程中，由于受热时钙钛矿层内空位引起的缺陷偶 极子的定向排列受到破坏，引起材料部分退极化，表现为300℃热处理后Bi7Ti 4NbO 21的压电活性降低了10%，显示了室温下材料的压电性能来源于自发极化的固有电 偶极子和缺陷偶极子的共同贡献.}}     

脉冲激光沉积温度及氧压对Bi2Sr2Co2Oy热电薄膜晶体结构与电输运性能的影响

利用脉冲激光沉积技术在c-Al₂O₃单晶基片上制备了Bi₂Sr₂Co₂O_y热电薄膜并研究了沉积温度和氧压对薄膜晶体结构及电输运性能的影响.在最佳沉积条件下制备的单相、c轴取向的Bi₂Sr₂Co₂O_y薄膜的室温电阻率ρ和塞贝克系数S分别为2.9mΩ/cm和110μupV/K,其功率因子S²/ρ好于在单晶样品上得到的值.此外,该薄膜在低温下表现出较强的负磁阻效应,在2K,9T时达到了40%.     

Nd掺杂对Bi4Ti3O12铁电薄膜的微结构和铁电性能的影响

利用溶胶-凝胶法在Pt/Ti/SiO₂/Si(100)衬底上制备了Nd掺杂Bi₄Ti₃O₁₂(Bi_4-xNd_xTi₃O₁₂, x=0.00,0.30,0.45,0.75,0.85,1.00,1.50)铁电薄膜样品.研究了Nd掺杂对Bi₄Ti₃O₁₂薄膜的微结构和铁电性能的影响.研究结果表明:Nd掺杂未改变Bi₄Ti₃O₁₂薄膜的基本晶体结构.在掺杂量x<0.45时,Nd³⁺只取代类钙钛矿层中的A位Bi³⁺.当x=0.45时,样品剩余极化强度达最大值,在270kV·cm^-1的电场下为32.7μC·cm^-2.掺杂量进一步增加时,结构无序度开始明显增大,Nd³⁺开始进入(Bi₂O₂)²⁺层,削弱其绝缘层和空间电荷库的作用,导致材料剩余极化逐渐下降.当掺杂量x达到1.50时,掺杂离子最终破坏(Bi₂O₂)²⁺层的结构,材料发生铁电-顺电相变.     

Sr2Bi4Ti5O18的压致结构相变

 使用4∶1的甲醇-乙醇混合液作传压介质，利用金刚石对顶砧装置（DAC），研究了层状铁电体Sr₂Bi₄Ti₅O₁₈的在位高压拉曼光谱和压致结构相变（0～27 GPa）。发现在8.31 GPa，Sr₂Bi₄Ti₅O₁₈经历了一次结构相交。在23.13 GPa以上，Sr₂Bi₄Ti₅O₁₈似乎出现了压致非晶相交的先兆。并使用内模方法对Sr₂Bi₄Ti₅O₁₈的内模进行了指认。     

纤维状TiO2/Bi2O3光催化剂的制备及其光催化性能

以C₁₆H₃₆O₄Ti和Bi(NO₃)·5H₂O为原料,以棉花纤维为生物模板,合成了系列纤维状TiO₂/Bi₂O₃光催化剂．采用XRD、SEM、UV-Vis等测试技术对样品的相结构、形貌和吸光性能等进行了表征分析．结果表明,样品中的Bi₂O₃为单斜相和四方相共存的混晶,纤维长度达到毫米级,     

大规模合成具有氧空位的多孔Bi2O3用于有效降解亚甲基蓝

光催化降解有机污染物由于其具有低能耗和绿色环保的特点，已经成为研究的热点. 氧化铋纳米晶体的带隙在2.0∽2.8 eV之间，利用它催化可见光降解有机污染物具有较高的活性，从而引起了越来越多的关注. 尽管近年来已经开发了几种制备Bi₂O₃基半导体材料的方法，但是仍然难以用简单的方法大规模地制备高活性的Bi₂O₃催化剂. 因此，开发简单可行的大规模制备Bi₂O₃纳米晶体的方法对于工业废水处理的潜在应用具有重要意义. 本文通过蚀刻商用BiSn粉末，然后进行热处理，成功地大规模制备了多孔Bi₂O₃. 获得的多孔Bi₂O₃在亚甲基蓝(MB)的光催化降解中表现出优异的活性和稳定性. 对该机理的进一步研究表明，多孔Bi₂O₃合适的能带结构允许生成活性氧物种，例如O₂^-·和·OH，可有效降解MB.     

利用氧化辅助气固法生长高磁性的α-Fe2O3和Fe3O4纳米线

探讨生长α-Fe₂O₃和Fe₃O₄纳米线的一个可控制的合成过程. 在研究中发现,高磁性的α-Fe₂O₃纳米线已经成功地利用氧化辅助气固法结晶生成于Fe_0.5Ni_0.5合金基板上;若基板事先浸泡于草酸溶液中,随草酸浓度的增加,所生长的纳米线晶相会逐转变为Fe₃O₄,当草酸浓度达到0.75 mol/L时,所生长的纳米线几乎全部转变成Fe₃O₄晶相. 此外,实验结果也显示所生长的纳米线长度及直径会随着气固过程中的温度上升而增加,生长密度则会随着气固过程中的流量加大而上升. 此过程所提出的合成程序可在2 h內完成.     

Tb2Fe15.5Cr1.5化合物的本征磁致伸缩

通过x射线衍射及磁测量手段研究了Tb₂Fe_15.5Cr_1.5化 合物的热膨胀性质及本征磁致伸缩性质.研究结果表明Tb₂Fe_15.5Cr _1.5化合物在293—672K的温度范围内具有六角相的Th₂Ni_{17型结构.在432—522K的温度范围内具有负热膨胀 性质，其平均热膨胀系数=-157×10^-5/K.对本征磁致伸缩的研究结果表明Tb2Fe15.5Cr1.5化合物中存在着较强的各向异性的本 征磁致伸缩，293K时其本征体磁致伸缩约为84×10^-3，晶格畸变主要发生在c 轴方向上.磁测量研究结果表明Tb2Fe15.5Cr1.5化合物的居里温度约为494K，比其母 合金Tb2Fe17高约80K.}     

Preparation, structure and photo-catalytic performances of hybrid Bi2SiO5 modified Si nanowire arrays

Bi₂SiO₅ modified Si nanowire array films were fabricated as photo-catalysts via dip-coating Bi(NO₃)₃ on silver-assisted electroless wet chemical etching Si nanowires and subsequently annealing. The structures and morphologies of as-prepared samples are characterized by X-ray diffraction, Fourier transform infrared spectrum, scanning electron microscopy and transmission electron microscopy. The results of photocatalytic experiments indicated that the Bi₂SiO₅ modified Si nanowire arrays benefit the improvement for efficient electron-hole separation and photo-catalytic stability, thereby possessing superior photo-degradation performance. These hybrid nanowire arrays will be promising materials for photo-catalysts and degradation agents.     

Novel photoluminescence properties of InAlO3（ZnO）m superlattice nanowires

One-dimension InAlO 3 (ZnO) m superlattice nanowires were successfully synthesized via chemical vapor deposition.Transmission electron microscopy measurements reveal that the nanowires have a periodic layered structure along the 0001 direction.The photoluminescence properties of InAlO 3 (ZnO) m superlattice nanowires are studied for the first time.The near-band-edge emissions exhibit an obvious red shift due to the formation of the localized tail states.The two peaks centered at 3.348 eV and 3.299 eV indicate a lever phenomenon at the low-temperature region.A new luminescence mechanism is proposed,combined with the special energy band structure of InAlO 3 (ZnO) m.     

Synthesis and magnetic properties of Fe100-xMox alloy nanowire arrays

The Fe100-xMox(13≤x≤25) alloy nanowire arrays are synthesized by electrodeposition of Fe 2+ and Mo 2+ with different ionic ratios into the anodic aluminum oxide templates.The crystals of Fe100-xMox alloy nanowires gradually change from polycrystalline phase to amorphous phase with the increase of the Mo content and the nanowires are of amorphous structure when the Mo content reaches 25 at%,which are revealed by the X-ray diffraction and the selected area electron diffraction patterns.As the Mo content increases,the magnetic hysteresis loops of Fe100-xMox alloy nanowires in parallel to the nanowire axis are not rectangular and the slopes of magnetic hysteresis loops increase.Those results indicate that the magnetostatic interactions between nanowires and the magnetocrystalline anisotropy both have significant influences on the magnetization reversal process of the nanowire arrays.     

Synthesis and magnetic properties of spinel CoFe2O4 nanowire arrays

Spinel CoFe₂O₄ nanowire arrays were synthesized in nanopores of anodic aluminum oxide (AAO) template using aqueous solution of cobalt and iron nitrates as precursor. The precursor was filled into the nanopores by vacuum impregnation. After heat treatment, it transformed to spinel CoFe₂O₄ nanowires. The structure, morphology and magnetic properties of the sample were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and vibrating sample magnetometer (VSM). The results indicate that the nanowire arrays are compact. And the individual nanowires have a high aspect ratio, which are about 80 nm in diameter and 10 μm in length. The nanowires are polycrystalline spinel phase. Magnetic measurements indicate that the nanowire arrays are nearly magnetic isotropic. The reason is briefly discussed. Moreover, the temperature dependence of the coercive force of the nanowire arrays was studied.     

Synthesis and characterization of axially periodic Zn2SnO4 dendritic nanostructures

Zn2SnO4 （ZTO） nanowires with a unique dendritic nanostructure were synthesized via a simple one-step thermal evaporation and condensation process. The morphology and microstructure of the ZTO nanodendrite have been investigated by means of field emission scanning electron microscopy （SEM）, x-ray diffraction （XRD） and high-resolution transmission electron microscopy （HRTEM）. SEM observation revealed the formation of branched nanostructures and showed that each branch exhibited a unique periodic structure formed by a row of overlaid rhombohedra of ZTO nanocrystals along the axis of the nanobranch. HRTEM studies displayed that the branches grew homoepitaxially as single-crystalline nanowires from the ZTO nanowire backbone. A possible growth model of the branched ZTO nanowires is discussed. To successfully prepare branched structures would provide an opportunity for both fundamental research and practical applications, such as three-dimensional nanoelectronics, and opto-electronic nanodevices.     

Synthesis and magnetic properties of ordered barium ferrite nanowire arrays in AAO template

BaFe₁₂O₁₉ nanowire arrays having single magnetic domain size (≤460 nm) in anodic aluminum oxide (AAO) templates were prepared by sol-gel and self-propagating high-temperature synthesis techniques. The diameter of the nanowire arrays is approximately 70 nm and the length is about 2-4 μm. The specimens were characterized using X-ray diffraction, vibrating sample magnetometer, field emission scan electron microscope, atomic force microscopy and microwave vector network analyzer. The magnetic properties of BaFe₁₂O₁₉ nanowire arrays embedded in AAO templates were measured by VSM with a field up to 1274 KA/m at room temperature. The results indicate that the nanowire arrays exhibit large saturation magnetization and high coercivity in the range of 6000 Oe and an obvious magnetic anisotropy with the easy magnetizing axis along the length of the nanowire arrays, probably due to the shape anisotropy and magneto-crystalline anisotropy. Finally the microwave absorption properties of the nanowires were discussed.     

非晶Fe89.7P10.3合金纳米线阵列的磁性研究

利用电化学沉积方法在阳极氧化铝模板中制备了Fe_89.7P_10.3非晶 合金纳 米线阵列.利用x射线衍射仪、透射电子显微镜、振动样品磁强计和穆斯堡尔谱仪研究了样品的结构和磁性,发现纳米线阵列是非晶结构，且拥有垂直磁各向异性和高的矫顽力，H_c =304×10⁴A/m.纳米线内部的平均超精细场和平均同质异能移分别为2 15×10⁶ A/m和007 mm/s；而纳米线末端的平均超精细场（233×10⁶ A/m ）大于内 部的值，平均同质异能移（004 mm/s）小于内部的值.另外，纳米线内部Fe原子磁矩与线轴的夹角约为16°，而在纳米线末端Fe原子磁矩与线轴的夹角约为28°.这些结果表明，由于形状各 向异性，在纳米线中实现了无序非晶合金磁矩的有序排列. 关键词： 非晶合金 纳米线阵列 垂直磁各向异性 穆斯堡尔谱     

Electrodeposition and characterization of thermoelectric Bi2Te2Se/Te multilayer nanowire arrays

Multilayer nanowire arrays of a new heterogeneous thermoelectric material, Bi₂Te₂Se/Te, were successfully fabricated by a template-assisted pulsed electrodeposition method. The nanowires were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, and energy dispersive X-ray spectroscopy, respectively. The diameter of the nanowires is in the range of 60–85 nm. By adjusting the concentration of Te precursor, the length of the Te segment can be modulated. At sufficient low concentration of Te precursor, the phase composition of the other segment can even be changed from Bi₂Te₂Se to Bi₂Se₂Te. The formation and growth mechanisms of the nanowires were proposed.     

Alumina template-assisted electrodeposition of Bi2Te2.7Se0.3 nanowire arrays

Bi₂Te_2.7Se_0.3 nanowire arrays have been fabricated by electrodeposition into the pores of an anodic aluminum oxide (AAO) template followed by annealing at 300 °C under Ar atmosphere. The as-prepared nanowires were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy and energy dispersive X-ray spectroscopy. The nanowires are uniform single crystalline with diameter of ∼14 nm.     

Stimulated emission from trapped excitons in SnO2 nanowires

The pump fluence dependent photoluminescence (PL) spectra of SnO₂ nanowires were investigated, which were synthesized with a high-temperature chemical reduction method. The integrated intensity of the narrower peak at 3.2 eV experiences a strong superlinear dependence on the pump fluence, and the narrowest width of the sharp peak is only 19 meV. Moreover, under high excitation fluence, an ultrafast decay time (less than 20 ps) appears in the time-resolved PL spectra. The emission of these SnO₂ nanowires shows strong apparent stimulated emission behaviors although the SnO₂ is a dipole forbidden direct gap semiconductor. The stimulated emission should relate to the localized islands on the surface of nanowire, which was observed through the high resolution transmission electron microscopy (HRTEM) image. The giant-oscillator-strength effect of bound exciton generated from the localized islands was considered to induce the stimulated emission of SnO₂ nanowires.