共查询到18条相似文献,搜索用时 574 毫秒
1.
2.
散斑计量技术—走向工程实用化的技术 总被引:1,自引:0,他引:1
散斑计量技术是在现代高科技成果如激光技术、视频技术、电子技术、信息与图像处理技术、计算机技术、佤息、精密测试技术等基础上发展起来的有效工程检测技术,它具有全场、无损、灵敏、实用的优点,因而得到了迅速发展和广泛的应用,散斑计量技术的最终目的是走向工程实用化,实现现场在线测量,随着它的发展,必然会在科学研究和工程实际中发挥重大的作用。 相似文献
3.
时间序列散斑干涉场中相位函数的计算 总被引:3,自引:2,他引:1
散斑干涉或电子散斑干涉计量应用于连续运动或变形物体时,就会产生一个时变的散斑干涉场,通过摄像系统连续地采集这一时变散斑场,可获得一系列时间序列散斑干涉图,通过对序列散斑图上各点在时间轴上光强值的变化进行分析,提出了一种基于时间序列的分析方法,用以提取干涉场的相位值,进而获得物体全场变形信息。 相似文献
4.
全息干涉计量中干涉计量场的统计特性 总被引:1,自引:0,他引:1
本文运用统计学方法推导了全息干涉计量中散斑计量场的统计特性.证明了:干涉计量场的复振幅为复圆高斯随机变量;干扰计量场强度的概率密度服从负指数分布;散斑干涉计量场的系综平均值代表变形信息. 相似文献
5.
提出了一种新的剪切散斑干涉方法─—二次波面干涉的剪切散斑干涉计量术.这一方法将被测物体变形前后波面的第一次干涉信息分别储存在两张全息干板上,通过光学信息处理实现波面的第二次干涉.两次波面干涉分别消除了位移和位移的一阶导数场对波面位相的影响,得到仅反映位移二阶导数场的条纹图. 相似文献
6.
7.
物体表面在一束相干光照明下的空间散斑位移场分布对于分析物体表面状态及位移、变形等信息具有重要意义。本文应用散斑场的相关方法与散斑相移技术得到了物体表面位移及变形参量与自由空间衍射场散斑位移的一般关系,给出了这种一般关系的简化与分离条件,并对物体平移、转动及热加载条件下的蜂窝结构进行了实验。 相似文献
8.
9.
10.
一种新的多通道散斑照相术及其应用 总被引:5,自引:0,他引:5
提出了一种新的多通道散斑照相术,通过旋转光楔实现多通道散斑图记录。该方法不仅能在一张记录介质上记录物体动有一些状态的多通道散斑图,且用全场滤波分析时,能方便地同时给出所有通道的物变形信息,得到清晰高衬比的干涉条纹图。 相似文献
11.
The random noise of the laser speckle field which develops at the focusing plane of an imaging system, is, by now, efficiently used in several interferometric techniques as an information carrier of the macroscopic wavefront distortion induced by the surface displacement field of the object under investigation. The actual noise in this kind of techniques is represented by the speckle decorrelation at the image plane — i.e. the destruction of the carrier — which may be caused by the modification of the texture surface (e.g. by yielding under a severe stress state), but it is inherently produced by the same displacement field under measurement. In the paper the phenomenon of laser speckle decorrelation is numerically simulated and experimentally investigated with the aim of estimating its sensitivity to local deformation and assessing a possible field of application. Satisfactory results in the field of NDT of multilayer fiber-reinforced composites were obtained by reducing the diaphragm of the lens to increase the sensitivity of the imaging system to speckle decorrelation induced by local deformation; unfortunately this simple approach requires a considerable amount of laser power for illuminating the object. Different aperture shapes were therefore numerically simulated which provided improved efficiency and sensitivity and whereby a semi-quantitative analysis of the displacement field could be experimented. 相似文献
12.
Rolando Gonzlez-Pea Rosa María Cibrin-Ortiz de Anda Angel J Pino-Velzquez Yhoama Gonzlez-Jorge Rosario Salvador-Palmer 《Optics and Lasers in Engineering》2003,39(5-6):609-618
Speckle photography (SP) is a powerful tool that is adequate to determine small displacements in micrometer range. This information shows other characteristics of structure deformation under loads and can be determined as stress and strain distribution. In this paper we present the results of the application of the SP technique used to study the behaviour of discontinuities in a shearwall model. These structural elements are very important to the stability of buildings. The displacement whole field around the discontinuities and loading points was determined using the pointwise method. This allows us to determine stress distribution at the point of interest by means of the suitable equations. We also present the stress distribution obtained through the finite element method in order to compare the results obtained by means of these two techniques. Good correspondence was found between the displacements determined by both techniques (r=0.982) and also between the stress values we obtained. 相似文献
13.
A comparative study of phase-shifting algorithms in digital speckle pattern interferometry 总被引:1,自引:0,他引:1
Digital speckle pattern interferometry (DSPI) is a tool for making qualitative as well as quantitative measurements of deformation of objects. Phase-shifting algorithms in DSPI are useful for extracting quantitative deformation data from the system. Comparative studies of the different phase-shifting algorithms in DSPI for object deformation measurement are presented. Static and quasi-dynamic deformation of the object can be measured using these algorithms. Error compensating five-step phase-shifting method is used for the algorithms. 相似文献
14.
In this paper, digital speckle correlation is used in the measurement of Ti alloy compression and tension test. The key technologies applied in the measurement are discussed in detail, including camera calibration with telephoto lens and digital image correlation in large deformation. Single camera self-calibration algorithm based on photogrammetry is proposed. In the algorithm, the interior parameters of camera are estimated without calibrated object, using the bundle adjustment technique, so the 3-D coordinates of calibration target points are not needed in advance to get a reliable camera calibration result. An updating reference image scheme could be employed to deal with large deformation situation. A large deformation measurement scheme, updating reference image scheme, is proposed in this paper. The un-deformed image is used as reference in correlation at first. Only for extremely large deformation field, in which iteration of correlation is not convergent, the reference image is updated to the image of previous deformed stage. Using this method, not only extremely large deformation can be measured successfully but also the accumulated error could be controlled. The 75 mm lens is calibrated in the measurement and compared the result with extensometer and un-calibrated image. Experimental results show that up to 150% tensile deformation and 50% compression deformation can be measured successfully. 相似文献
15.
Shape deviations of spur gears obtained by using Electronic Speckle Pattern Interferometry are compared with the results of numerical simulation. The dual illumination method produces a speckle pattern by simultaneous illumination of a sample by two laser waves symmetrically in the direction of observation. Two images obtained, respectively, before and after deformation are subtracted to obtain the field of displacement. Furthermore, a study of meshing stiffness was performed for different types of setting for an internal gear. 相似文献
16.
17.