共查询到19条相似文献,搜索用时 140 毫秒
1.
2.
3.
测量物体位移的数字白光散斑照相术 总被引:2,自引:1,他引:1
给出了一测量物体刚体位移的数字白光散斑照相术。数字傅里叶变换从双曝光字白光散斑图用来产生杨氏条纹。该杨氏条纹能够用数字傅里叶变换结合条纹重构进行自动分析。此外,给出一种条纹质量增强的方法。 相似文献
4.
频域数字散斑相关法对双材料界面裂纹的研究 总被引:4,自引:1,他引:3
本文将数字散斑相关方法与显微放大技术相结合,对铜、钢双材料界面裂纹试作进行了研究,提出了频率城数字散斑相关法,该方法在频率域中利用物体变形前后散斑图对应子区域的相关搜索来测量物体的变形位移,该方法与常用的空间域数字相关法相比,避免了相关识别中的反复搜索,极大地提高了信息提取速度,并且具有更高的定位精度和测量精度。文章最后给出了实验结果。 相似文献
5.
6.
在数字全息成像中,散斑噪声严重影响了再现像的信噪比和成像分辨率,因此为了提高数字全息成像质量,迫切需要抑制再现像的散斑噪声.分析并给出了矩形散射光斑的强度协方差,定量计算了特定实验条件下产生退相关散斑图样的最小角度差.结合透镜的性质设计并搭建了多角度无透镜傅里叶变换数字全息成像系统,利用光纤端面在透镜焦平面的二维机械移动代替传统反射镜的旋转,使照明光束在不改变照明位置和大小的同时,可任意改变光束方向.移动光纤端面使多角度照明满足最小角度差,获取了81幅数字全息图.利用单次快速傅里叶逆变换实现数值再现,对多幅再现像的强度像求平均,实验结果表明散斑对比度降低为单幅再现像的14.6%,使图像信噪比提高了6.9倍.该抑制散斑的多角度数字全息成像方法有效的抑制了散斑噪声,且成像光路结构简单,可操作性强. 相似文献
7.
提出了用于测量物体内部三维变形场的数字体散斑(DVSP)法。利用计算机断层扫描(CT)、磁共振成像(MRI)、激光扫描共焦显微镜(LSCM)或光学相干断层成像术(OCT)获取具有散斑特征的物体变形前后的三维立体图像,将其分别分割成若干具有相同尺寸的子块体,对相对应的子块体进行第一步三维快速傅里叶变换,在频谱域进行数值干涉得到合成谱,对合成谱进行第二步三维快速傅里叶变换,得到含位移信息的扩展脉冲函数,通过求取峰值位置得到子块体的位移矢量,对所有变形前后相对应的子块体逐一进行上述两步三维快速傅里叶变换,就可以求出所有子块体的位移矢量,从而获得物体内部三维变形场。利用模拟生成的三维散斑体图像,通过数字实验,分析了散斑尺寸、数目、子块体尺寸、图像对比度和亮度对DVSP法精度与准确性的影响。利用DVSP法测量了红砂岩单轴压缩内部的三维应变场,由位移场及应变场分布可直观地揭示试件内部变形特征。 相似文献
8.
提出了用于测量物体内部三维变形场的数字体散斑(DVSP)法。利用计算机断层扫描(CT)、磁共振成像(MRI)、激光扫描共焦显微镜(LSCM)或光学相干断层成像术(OCT)获取具有散斑特征的物体变形前后的三维立体图像,将其分别分割成若干具有相同尺寸的子块体,对相对应的子块体进行第一步三维快速傅里叶变换,在频谱域进行数值干涉得到合成谱,对合成谱进行第二步三维快速傅里叶变换,得到含位移信息的扩展脉冲函数,通过求取峰值位置得到子块体的位移矢量,对所有变形前后相对应的子块体逐一进行上述两步三维快速傅里叶变换,就可以求出所有子块体的位移矢量,从而获得物体内部三维变形场。利用模拟生成的三维散斑体图像,通过数字实验,分析了散斑尺寸、数目、子块体尺寸、图像对比度和亮度对DVSP法精度与准确性的影响。利用DVSP法测量了红砂岩单轴压缩内部的三维应变场,由位移场及应变场分布可直观地揭示试件内部变形特征。 相似文献
9.
提出一种新的数字散斑照相计量方法,该方法研究将CCD和计算机相结合,在自然光照下了对被测量物体照相,通过一种快的图像处理,直接提取物体变形信息。突破光测的激光照明及傅里叶变换模式,实现光测量技术真正自动化。 相似文献
10.
数字散斑相关方法及应用进展 总被引:1,自引:0,他引:1
数字散斑相关方法(DSCM)是一种可以测量变形和应变的光学非接触测量方法,其通过对变形前后物体表面的图像进行灰度信息相关计算来获取被测物的力学性能。本文叙述了数字散斑相关方法近年来在国内外的发展动态和应用现状,详细论述了基于自适应遗传算法、智能神经网络方法、小波变换法的一系列新型相关搜索方法。文章指出,近年来,数字散斑相关技术已发展到相对成熟,目前的研究重点是提高测试精度和图像处理速度,而提高散斑图像质量和研究高效的算法是需要努力的方向。 相似文献
11.
In order to solve storage problem in real-time optical metrology, storing digital specklegrams by using a lossy-joint photographic experts group image compression is studied. A spatial distribution of a correlation signal calculated from the compressed specklegrams is used as a criterion for evaluating quality of information content of the specklegrams. The results show that high quality of displacement information is retrievable from the compressed specklegrams. 相似文献
12.
Measurement of in-plane and out-of-plane displacement components using the white light speckle method is considered for three different cases. The first is applicable when in-plane components are small and stresses are directly related to the second differential of the out-of-plane component. The other cases involve components of the same order of magnitude but require recording of either one or two specklegrams. Evidence of experimental demonstration of each case is given. 相似文献
13.
Digital speckle three-shearing-aperture interferometry used for the measurement of curvature distribution fields of a deformation object is proposed for the first time. In this method, pure curvature distribution fringes without containing slope distribution fringes can be obtained by using digital speckle three-shearing-aperture interferometry. Two specklegrams, one before and the other after object deformation, are recorded by a CCD camera and stored in a computer. A 2-D fast Fourier transform (FFT) and a 2-D inverse FFT (IFFT) are performed on the two specklegrams. The subtraction of the transformed specklegrams will produce curvature distribution fringes, and the speckle noises in curvature distribution fringes can be removed after these fringes pass through low-pass filtering. Results from theory and experiments are in good agreement. 相似文献
14.
15.
We propose a simple optical approach for the convolutional pre-processing of stellar specklegrams in the shift-and-add (SAA) method. It uses an incoherent optical processing, where a speckle pattern on a displaying device is re-imaged and a point-spread-function of the re-imaging system is used as the convolution kernel. This approach is suitable for use in the real-time SAA-system recently proposed. Experimental results using observational stellar specklegrams displayed on a cathode-ray-tube-monitor are reported to demonstrate that the optical pre-processing improves the signal-to-noise ratio of the final image. 相似文献
16.
17.
18.
讨论了横向位移双曝光散斑图维纳谱的信息分布,并由此导出杨氏纹图的一般表达式。讨论了条纹可见度与应变,面内转动,照明光束直径与条纹图图空间坐标的关系,指出了在条纹可见度影响下最大可见条纹数目。还讨论了散斑衬比与衍射晕的关系。 相似文献
19.
Application of iteration and finite element smoothing technique for displacement and strain measurement of digital speckle correlation 总被引:3,自引:1,他引:3
In this paper, an improved method for measuring displacement in digital speckle correlation technology, which is based on an iterative and spatial-gradient algorithm, is developed. After obtaining full-field displacement, both finite element method and 2D generalized cross-validation (GCV) algorithm are adopted for smoothing the displacement field, and then the strain field can be obtained from the smoothed displacement field. The method is estimated by simulated speckle patterns and three-point bending experiment. All the results show the improved method can obtain a reasonable estimation of displacement and strain fields in digital speckle correlation method. 相似文献