利用自制的单频激光器获得近通讯波段正交振幅压缩态光场

利用自制的1.34 μm和0.67 μm双波长输出单频激光器作为泵浦源,泵浦基于PPKTP晶体的光学参量放大器,通过边带锁频技术将光学参量放大腔腔长锁定在激光频率上,将泵浦光和信号光相对相位锁定在π相位,经参量缩小过程获得低于散粒噪声极限约3 dB的正交振幅压缩光.压缩光位于光纤通信窗口——1.3 μm波段.     

红外探测装置中光谱分光镜的设计与制备

在红外探测装置中,光谱分光镜是用来把3 μm～5 μm和8 μm～12 μm 2个波段的光谱分开的零件.介绍了一种在通用镀膜机上制备光谱分光镜的新工艺.在该膜系的设计过程中,把Willey公式引入到对其平均透过率最高值进行估算的过程中,同时针对国产镀膜机控制精度不高的特点,尽量使用规整膜层进行设计.为了进一步提高8 μm～12 μm波段的透过率,在膜系的最外侧引进了一层自行配制的低折射率氟化物材料,制备出了符合技术指标的红外光谱分光镜.     

聚合物微环电光开关的模拟和优化

利用耦合模理论、电光调制理论和微环谐振理论,提出一个完善合理的聚合物微环电光开关的器件模型,并给出了可用以分析微环谐振过程的光强传递函数,据此在谐振波长1 550 nm下对该器件进行了模拟和优化.结果表明：微环波导芯截面尺寸为1.8×1.8 μm2,波导芯与电极间的限制层厚度为1.1 μm,电极厚度为0.15 μm,微环半径为15.2 μm,微环与信道间的耦合间距为0.16 μm,光绕微环转300 圈即可形成稳定的谐振状态,此时的谐振时间约为147.4 ps.不加电压时,下信道的插入损耗约为0.8 dB,上信道的串扰约为－26 dB;当取工作电压等于19.7 V为开关电压时,上信道的插入损耗约为0.34 dB,下信道的串扰约为－20 dB.     

基于哈特曼波前传感器的非制冷红外成像光学读出系统

提出了一种新的基于哈特曼波前传感器(SHWS)的光学读出系统.该系统利用SHWS探测焦平面阵列(FPA)单元在受热前后反射波前斜率的变化量重构被探测物体的红外辐射图像.在理论上详细讨论其成像性能后,实验获得了单元尺寸为60 μm×60 μm,阵列大小为34 pixel×38 pixel的高温物体红外图像,其噪声等效温度差(NETD)约为3.8 K.优化系统参数设计,可以提高哈特曼波前传感器对到达角的测量精度进而获得更小的噪声等效温度差.     

深亚微米SOI射频 LDMOS功率特性研究

提出了一种SOI LDMOS大信号等效电路模型,并给出了功率增益和输入阻抗表达式. 基于制备的深亚微米SOI射频LDMOS,测试了功率增益和功率附加效率. 深入研究了SOI LDMOS功率特性与栅长,单指宽度,工作电压和频率之间关系. 栅长由0.5 μm减到0.35 μm时,小信号功率增益增加44％,功率附加效率峰值增加9％. 单指宽度由20 μm增加到40 μm,600 μm /0.5 μm器件小信号功率增益降低23％,功率附加效率峰值降低9.3％. 漏端电压由3 V增加到5 V,600 μm /0.3 关键词： SOI射频 LDMOS 深亚微米 功率增益 功率附加效率     

基于VO_2薄膜非致冷红外探测器光电响应研究

VO2 薄膜是非致冷微测辐射热红外探测器热敏电阻材料 .研究中应用微电子工艺制备了VO2 溅射薄膜红外探测器 ,在 2 96K的环境中测试了该探测器在不同的直流偏置、光调制频率下对 873K标准黑体源 8— 12 μm红外辐射的光电响应以及器件的噪声电压 ,在 10和 30Hz的调制频率下其响应率分别大于 17kV/W和接近 10kV/W .该探测器实现了探测率D 大于 1 0× 10 8cmHz/W ,热时间常量为 0 0 11s的 8— 12 μm非致冷红外探测     

LYB晶体主轴折射率测量与评价

采用自准直法测量了在30℃~170℃范围内,0.473 μm、0.632 8 μm、1.064 0 μm、1.338 μm等波长下LYB晶体的主轴折射率,得到Sellmeier方程并计算了1.319 μm下该晶体的主轴折射率,与实验测量的结果进行了比较,两者之间的吻合性较好.测量结果表明,该晶体具有较低的折射率以及折射率随温度变化小,热稳定性较好.     

红外3.7～4.8 μm波段折射/衍射光学系统的消热差设计

研究了衍射光学元件在红外折射/衍射混合光学系统中的消热差特性并给出了具体设计实例,该系统工作波段为3.7～4.8 μm,全视场角为7.12°,满足100%冷光阑效率.系统仅采用硅和锗两种材料,设计结果表明,该系统在-50～100℃温度范围内不仅成像质量接近衍射极限,而且结构简单、体积小、质量轻,适用于像元尺寸为30 μm、像元数320×240的凝视焦平面阵列探测器.     

高功率宽调谐输出的多周期极化铌酸锂晶体光学参量振荡器

利用掺杂浓度为5 mol%的掺氧化镁多周期极化铌酸锂晶体实现了高效单谐振的准相位匹配光参量振荡器,所使用的周期极化铌酸锂晶体有6个周期,且以1 μm为间隔,从26.5~31.5 μm. 该光参量振荡器以脉宽为150 ns,重复频率为10 kHz的声光调Q Nd∶YAG激光器为泵浦源,且泵浦光波长为1.064 μm. 通过控制晶体的温度（50~200℃）以及改变晶体的极化周期（26.5~31.5 μm）,可由该光参量振荡器获得2.83~2.89 μm,3.10~3.38 μm,3.57~3.78 μm,3.95~4.12 μm, 4.28~4.46 μm,4.65~4.79 μm的闲频光连续调谐输出. 且当泵浦功率为8.15 W时,在闲频光输出波长为3.33 μm处,获得了最大输出功率2.17 W.     

公路交通噪声预测模型探讨

对公路交通噪声预测模型进行了分析推导,指出美国联邦公路局FHWA模型为近似表达式,并给出了精确表达式。对FHWA模型与精确表达式在硬地面、软地面、混合地面几种条件下的值进行了比较分析。结果表明,两者在硬地面条件下的形式和计算结果相同;在混合地面,即公路的实际情况下,两者存在差异,差值等于10lg(r1/r0)α。在用于高速公路交通噪声预测计算时,当r0取15m,该差值较小,当r0取7.5m,该差值增大;在一般情况下,r0取15m时的差值为±0.3dB(A),r0取7.5m时的差值为1.2—1.8dB(A),后者约占交通噪声预测值的1.5-4%,是不应忽视的。说明我国在引用FHWA模型时,对参考点距离的更改,会造成用于高速公路交通噪声预测的误差增大。建议我国使用本文推导给出的修订模型。     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.