共查询到20条相似文献,搜索用时 125 毫秒
1.
再生核空间中样条插值算子与最佳插值逼近算子的一致性 总被引:12,自引:1,他引:11
对于微分算子样条,为了保证一致收敛性,通常要求较高的光滑性条件。对多项式样条来说,至少要求二阶导数连续才能保证一致收敛性。本文在再生核空间H_0~1中把微分算子样条与再生核联系起来了,证明了这种微分算子样条与H_0~1中的最佳插值逼近算子的一致性,并利用最佳插值理论可直接得出H_0~1空间中的一类二阶微分算子对绝对连续函数的一致收 相似文献
2.
由可逆线性系统确定的算子插值样条及其构造与连续性质 总被引:1,自引:0,他引:1
1.引言 样条理论与线性系统理论的相互联系与相互渗透,对促进样条理论与方法在随机过程最佳估计、极小能控制和数字信号处理等方面的应用有着重要的意义[1-4].对于由一个线性微分算子确定的插值样条函数,它与线性系统及最优控制的联系是很明显的.设L(D)为线性微分算子,方程 L(D)y(t)=u(t)总与一个能控规范型线性系统相对应, L(D)是从该系统的输出y(t)到输入u(t)的线性算子.在一个相应的再生核 Hilbert空间中,用范数||L(D)y(t)||在插值约束下的极小解定义微分算子插值样条.… 相似文献
3.
1.引言 对线性算子的有限秩算子逼近是最经典的问题.并且它的应用极广.如数值积分公式、函数的逼近、数值原函数、方程的数值解法等.1986年,在文[1]中,首次给出了在再生核空间中函数的最佳逼近算子(恒等算子的有限秩算子逼近).之后;在文[2]中给出了数值原函数.又在文[3]、[5]、[6]等中利用有限秩算子逼近(并非是最佳逼近)给出了一些方程的数值解法.但这些讨论都是在一元函数空间上只对特殊算子进行的.1997年,虽然在文[4]中给出了完备的二元再生核空间及二元函数的最佳逼近插值算子.但是对多元… 相似文献
4.
再生核空间扣的一类最佳逼近及其应用 总被引:1,自引:0,他引:1
谢树森 《高校应用数学学报(A辑)》1996,(1):83-90
在[1-2]中分别定义了具有再生核的Hilbert空间W^12[a,b]和W,并给出再生核的解析式。本文讨论再生核空间中线性算子的一类最佳逼近,给出逼近算子的表达式及误差估计,作为特例得到类似于[1-4]中的插值的公公式,数值积分公式和数值原函数公式,但本文的公式计算更简便。 相似文献
5.
1引言随着计算机科学技术的发展,多元样条在力学和计算机辅助几何设计(CAGD)中的应用越来越引起人们极大兴趣.然而,由于一般剖分下样条空间的研究有相当的难度,迄今为止只对于一些特殊剖分的样条空间取得了一定的进展,如:矩形剖分,均匀的1-型,2-型三角剖分等.王仁宏和崔锦泰讨论了均匀2-型三角剖下的拟插值算子以及其逼近性质,鉴于在工程和实际应用中均匀剖分具有一定局限性,作者在文献([1],[3])的基础上,对于非均匀2-型三角剖分,给出了一类拟插值算子,并研究了它的逼近性质.同时,利用其构造了一类… 相似文献
6.
希氏空间中算子样条插值及算子方程的近似解 总被引:2,自引:0,他引:2
本文首先讨论希氏空间中由有界线性算子T确定的抽象插值样条(本文称T样条)的构造,通过引入新的内积得到T样条的投影特征和表达式.然后研究算子方程Tx=y的投影近似解和T样条近似解,并给出了两种近似解误差之间的关系. 相似文献
7.
本文利用纳依玛克 ~[1]的方法研究了 2n阶非对称微分算子(J-对称微分算 子);得到一类极限点型的非对称微分算子(J-对称微分算子). 相似文献
8.
再生核空间中的微分算子样条小波 总被引:5,自引:1,他引:4
0 引 言r次多项式样条小波是从一个满足特殊的广义微分方程Dr+1φ(x)=δ(x)(D是广义微分子算子)的解φ(x)=xr+r!出发来构造的,文献[1]根据这一思想给出非多项式的H1(R)空间中微分算子样条小波分析的构造方法,本文基于这一思路来讨论W2(R)空间中的微分算子样条小波理论.在W2(R)空间中讨论非多项式形式的微分算子样条小波分析理论,这是多项式小波理论自然深入的发展.本文首先给出W2(R)空间中小波分析定义,然后给出小波函数在时、频域上的表达式,最后利用W2(R)空间中的若干特殊性质,给出小波的投影表达式.并证明了投影逼近函数uj(X)… 相似文献
9.
10.
利用再生核H10空间中的样条插值算子给出了H10空间中线性泛函的最佳逼近,为讨论微分方程边值问题的数值解提供了新方法.数值算例表明了该方法的有效性. 相似文献
11.
W_2~m空间中样条插值算子与最佳逼近算子的一致性 总被引:7,自引:0,他引:7
This paper discusses generalized interpolating splines which determined by n order linear differential operators, and the best operators of interpolating approximation in W_2~m spaces, The explicit constructive method for the reproducing kernel in W_2~m space is presented, and proves the uniformity of spline interpolating operators and the best operators of interpolating approximation W_2~m space by reproducing kernel. The explicit expression of approximation error on a bounded ball in W_2~m space, and error estimation of spline operator of approximation are obtained. 相似文献
12.
W_2~m空间中样条插值算子与线性泛函的最佳逼近 总被引:3,自引:0,他引:3
In this paper,the convergency of spline interpolation operators is obtained,these spline operators are determined by linear differential operators and constraint functionals.The errors of the interpolating spline with EHB fanctionals are estimated.The best approximation of linear functionals on W2^n spaces are investigated,which let to a useful computational method for the approximation solution of higher order linear differential equations with multipoint boundary value conditions. 相似文献
13.
几种有理插值函数的逼近性质 总被引:6,自引:1,他引:5
1 引 言在曲线和曲面设计中,样条插值是有用的和强有力的工具.不少作者已经研究了很多种类型的样条插值[1,2,3,4].近些年来,有理插值样条,特别是三次有理插值样条,以及它们在外型控制中的应用,已有了不少工作[5,6,7].有理插值样条的表达式中有某些参数,正是由于这些参数,有理插值样条在外型控制中充分显示了它的灵活性;但也正是由于这些参数,使它的逼近性质的研究增加了困难.因此,关于有理插值样条的逼近性质的研究很少见诸文献.本文在第二节首先叙述几种典型的有理插值样条,其中包括分母为一次、二次的三次有理插值样条和仅基于函数值… 相似文献
14.
15.
16.
Periodic spline functions are introduced by use of reproducing kernel structure in Hilbert spaces. Minimum properties are described in interpolation and best approximation problems. A numerical method for determining interpolating splines and best approximations is proposed.Dedicated to Prof. Dr. F. Reutter on the occasion of his 70th birthday 相似文献
17.
一种四次有理插值样条及其逼近性质 总被引:3,自引:0,他引:3
1引言有理样条函数是多项式样条函数的一种自然推广,但由于有理样条空间的复杂性,所以有关它的研究成果不象多项式样条那样完美,许多问题还值得进一步的研究.近几十年来,有理插值样条,特别是有理三次有理插值样条,由于它们在曲线曲面设计中的应用,已有许多学者进行了深入研究,取得了一系列的成果(见[1]-[7]).但四次有理插值样条由于其构造所花费的计算量太大以及在使用上很不方便而让人们忽视了其重要的应用价值,因此很少有人研究他们.实际上,在某些情况下四次有理插值样条有其独特的应用效果,如文[8]建立的一种具有局部插值性质的分母为二次的四次有理样条,即一个剖分 相似文献
18.
B. Sheng 《Acta Mathematica Hungarica》2009,122(4):339-355
The paper is related to the lower and upper estimates of the norm for Mercer kernel matrices. We first give a presentation
of the Lagrange interpolating operators from the view of reproducing kernel space. Then, we modify the Lagrange interpolating
operators to make them bounded in the space of continuous function and be of the de la Vallée Poussin type. The order of approximation
by the reproducing kernel spaces for the continuous functions is thus obtained, from which the lower and upper bounds of the
Rayleigh entropy and the l
2-norm for some general Mercer kernel matrices are provided. As an example, we give the l
2-norm estimate for the Mercer kernel matrix presented by the Jacobi algebraic polynomials. The discussions indicate that the
l
2-norm of the Mercer kernel matrices may be estimated with discrete orthogonal transforms.
Supported by the national NSF (No: 10871226) of P.R. China. 相似文献
19.
This report derives explicit solutions to problems involving Tchebycheffian spline functions. We use a reproducing kernel Hilbert space which depends on the smoothness criterion, but not on the form of the data, to solve explicitly Hermite-Birkhoff interpolation and smoothing problems. Sard's best approximation to linear functionals and smoothing with respect to linear inequality constraints are also discussed. Some of the results are used to show that spline interpolation and smoothing is equivalent to prediction and filtering on realizations of certain stochastic processes. 相似文献