基于信息扩散的模糊关系矩阵的三种构造方法及适用条件

介绍了由信息扩散技术生成原始信息矩阵的方法,以及由原始信息矩阵构造模糊关系矩阵的三种实用方法,最后通过实例分析,给出了这三种模糊关系矩阵的适用条件.     

Fuzzy关系矩阵传递闭包的截矩阵-Warshall算法

根据模糊矩阵的截矩阵性质,提出了利用截矩阵求模糊关系矩阵传递闭包的一种新算法。     

基于相容性的语言判断矩阵的不一致性调整的新方法

语言判断矩阵是决策者给出的一种重要的偏好信息形式.本文定义了语言判断矩阵对应的导出矩阵,语言判断矩阵一致性等概念,研究了语言判断矩阵导出矩阵与其特征矩阵的相容性和一致性的关系,在此基础上定义了语言判断矩阵与其特征矩阵的偏差矩阵,由此给出了语言判断矩阵不一致性调整的新方法.实例分析表明该方法行之有效.     

Riordan 矩阵在广义 Motzkin 路计数中的应用

用Riordan矩阵的方法研究了具有4种步型的加权格路(广义Motzkin路)的计数问题,引入了一类新的计数矩阵,即广义Motzkin矩阵.同时给出了这类矩阵的Riordan表示,也得到了广义Motzkin路的计数公式.Catalan矩阵,Schrder矩阵和Motzkin矩阵都是广义Motzkin矩阵的特殊情形.     

AHP中判断矩阵一致性改进的迭代算法

本文研究了扰动矩阵与判断矩阵的不一致性的关系 ,提出了一种新的改进判断矩阵一致性的迭代算法 .     

区间数互补判断矩阵的一种新排序算法

针对区间数互补判断矩阵元素表示的特点,定义了区间数互补判断矩阵的等价矩阵族,得到了区间数互补矩阵一致性检验方法.通过构造一种新的求解区间数互补判断矩阵的权重区间的决策模型,得到一种排序算法.最后给出一个算例,描述此方法的应用.     

Toeplitz型矩阵的逆矩阵的快速三角分解算法

针对有关“型”矩阵的三角分解问题 ,提出了一种 Toeplitz型矩阵的逆矩阵的快速三角分解算法 .首先假设给定 n阶非奇异矩阵 A,利用一组线性方程组的解 ,得到 A- 1的一个递推关系式 ,进而利用该关系式得到 A- 1的一种三角分解表达式 ,然后从 Toeplitz型矩阵的特殊结构出发 ,利用上述定理的结论 ,给出了Toeplitz型矩阵的逆矩阵的一种快速三角分解算法 ,算法所需运算量为 O( mn2 ) .最后 ,数值计算表明该算法的可靠性 .     

幂等矩阵的性质及其推广

首先对幂等矩阵的简单性质进行了归纳总结,接着论证了幂等矩阵的等价条件及其特征值的取值范围,并讨论了幂等矩阵与实对称矩阵的关系、幂等矩阵与其伴随矩阵的特征值和特征向量的对应关系及幂等矩阵在群逆中的一个性质.最后讨论了幂等矩阵的两种分解形式.     

求首尾和r-循环矩阵的极小多项式的算法

研究了域上首尾和r-循环矩阵，利用多项式环的理想的Groebner基的算法给出了任意域上首尾和r-循环矩阵的极小多项式和公共极小多项式的一种算法.同时给出了这类矩阵逆矩阵的一种求法。     

乘幂法求矩阵特征向量与特征值的初始向量及循环控制

矩阵迭代法是求矩阵的第一阶特征值与特征向量的一种数值方法 .本文讨论了用矩阵迭代法求解矩阵的特征值与特征向量时的初始向量选取和循环控制条件     

颤振分析中的特征值排序问题

颤振分析中判断颤振临界速度的重要依据是系统V-g和V-f图,即系统特征值随参数的变化曲线.在几乎所有商用软件及自编程序的输出结果中,有时会出现所谓的"窜支"现象,这给颤振临界速度和颤振穿越分支及耦合形式的判断带来很大不便.通过隐函数定理可以证明,除重特征值点以外,系统特征值连续依赖于系统参数变化.依据多元向量值函数连续性,建立对特征值的排列算法,给出系统特征根轨迹的正确曲线,再输出V-g和V-f图数据,从而避免"窜支"现象.编制应用程序,通过几个典型算例对算法进行了验证.该工作能够有效简化颤振分析的后处理工作,提高分析效率.     

On the hyperbolicity of the period-doubling fixed point

We give a new proof of the hyperbolicity of the fixed point for the period-doubling renormalization operator using the local dynamics near a semi-attractive fixed point (in a Banach space) and the theory of holomorphic motions. We also give a new proof of the exponential contraction of the Feigenbaum renormalization operator in the hybrid class of the period-doubling fixed point: our proof uses the non-existence of invariant line fields in the period-doubling tower (C. McMullen), the topological convergence (D. Sullivan), and a new infinitesimal argument.

     

考虑服务和退货的双渠道供应链定价问题研究

在考虑零售服务和消费者退货情况下,运用两阶段优化方法分别探究了集中式和分散式两种双渠道供应链的最优定价策略。研究发现零售服务有助于提高零售商的渠道权力,并始终使制造商获益,但只有当服务水平小于某一临界值时,才使制造商和零售商同时得到帕累托改进。零售价格和直销价格与退货率正相关,而与服务水平的关系受渠道结构的影响。服务水平的提高加剧了供应链的“双重边际化”效应,制造商通过生产与消费者需求相匹配的产品来降低退货风险可以减弱这种效应,从而提高供应链效率。     

树脂基复合材料粘接的优化设计

本文在试验数据和理论分析的基础上,提出树脂基复合材料单搭接的优化设计的原则,胶粘剂的选择、被粘物的设计,粘接长度的选择、胶层厚度的选择等.认为通过优化设计可以提高粘接强度,减轻产品的重量,提高其质量.     

带有免疫和传染年龄的传染病模型

建立了带有免疫和传染年龄的传染病模型,这种传染病带有病原体Ⅰ或Ⅱ,病原体Ⅰ可发展为病原体Ⅱ,得到了无病平衡态全局稳定和局部稳定的条件.当病原体Ⅰ不发展为病原体Ⅱ时,得到了病原体Ⅰ类平衡态的稳定性依赖于病原体Ⅱ类的基本再生指数.     

Stress intensity factors for a finite plate with an inclined crack by boundary collocation

In this paper, we combine the Muskhelishvili＇s complex variable method and boundary collocation method, and choose a set of new stress function based on the stress boundary condition of crack surface, the higher precision and less computation are reached. This method is applied to calculating the stress intensity factor for a finite plate with an inclined crack. The influence of θ （the obliquity of crack） on the stress intensity factors, as well as the number of summation terms on the stress intensity factor are studied and graphically represented.     

拍卖机制设计在区块链中的应用与挑战

区块链是新一代信息技术的重要组成部分,是分布式网络、加密技术、智能合约等多种技术集成的新型数据库软件。过去的十多年,区块链技术在全球范围内产生广泛影响。如今的区块链技术,已从最初的关注于解决货币和支付的去中心化问题,转入到解决市场的去中心化问题。智能合约的出现使得基于区块链技术的去中心化金融进入高速发展状态,也涌现出区块链环境下的各类拍卖场景。本文首次从机制设计角度,以区块链交易费机制,非同质化代币(Non-Fungible Token,NFT)拍卖和矿工可提取价值(Miner-Extractable Value,MEV)交易位置拍卖为主要对象,总结和剖析近些年来区块链上特有的拍卖机制;并针对区块链特性,提出区块链上拍卖机制设计所面临的挑战和未来亟待解决的问题。     

Creep of polymer concrete in the nonlinear region

Two polyester-based polymer concretes with various volume content of diabase as an extender and aggregate are tested in creep under compression at different stress levels. The phenomenological and structural approaches are both used to analyze the experimental data. Common features of changes in the instantaneous and creep compliances are clarified, and a phenomenological creep model which accounts for the changes in the instantaneous compliance and in the retardation spectrum depending on the stress level is developed. It is shown that the model can be used to describe the experimental results of stress relaxation and creep under repeated loading. Modeling of the composite structure and subsequent solution of the optimization problem confirm the possibility of the existence of an interphase layer more compliant than the binder. A direct correlation between the interphase volume content and the instantaneous compliance of the composite is revealed. It is found that the distinction in nonlinearity of the viscoelastic behavior of the two polymer concretes under investigation can be due to the difference in their porosity. Submitted to the 11th International Conference on Mechanics of Composite Materials (Riga, June 11–15, 2000.) Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 2, pp. 147–164, 2000.     

Modelling and simulation of micro-well formation

Physico-chemical processes on the micro-scale require new modelling concepts because some effects become dominating that are negligible for macroscopic systems. This is illustrated by a new method for the production of micro-wells based on the placement of a small drop of toluene on a plate of polystyrene. After droplet evaporation, a micro-well is left. A mathematical model has been developed to understand the elementary processes of the micro-well formation. The model accounts for: (1) growth of the drop on the substrate, (2) evaporation process of the solvent, (3) dissolution of the substrate, (4) flow rate in the evaporating drop caused by the pinning effect, including the vertical velocity profile, and (5) increase in the concentration of dissolved material followed by precipitation. In the modelling and simulation process, it could be shown that the method of drop production also has a significant influence on the shape of the micro-wells.     

A perturbed risk model with dependence between premium rates and claim sizes

This paper considers a dependent risk model with diffusion for the surplus of an insurer, in which a current premium rate will be adjusted after a claim occurs and the adjusted rate is determined by the amount of the claim. At the same time, the diffusion is changed correspondingly. Using Rouché’s theorem, we first derive the closed-form solution for the Laplace transform of the survival probability in the dependent risk model. Then, using the Laplace transform, we derive a defective renewal equation satisfied by the survival probability. For the exponential claim sizes, we present the explicit recursion expression for the survival probability, by which we can exactly solve the survival probability step-by-step. We also illustrate the influence of the model parameters in the dependent risk model on the survival probability by numerical examples.