Multisignal histogram‐based islanding detection using neuro‐fuzzy algorithm

Islanding is an important concern for grid‐connected distributed resources due to personnel and equipment safety issues. Several techniques based on passive and active detection schemes have been proposed previously. Although passive schemes have a large nondetection zone (NDZ), concerns have been raised about active methods because of their degrading effect on power quality. Reliably detecting this condition is regarded by many as an ongoing challenge because existing methods are not entirely satisfactory. This article proposes a new integrated histogram analysis method using a neuro‐fuzzy approach for islanding detection in grid‐connected wind turbines. The main objective of the proposed approach is to reduce the NDZ to as close as possible to zero and to maintain the output power quality unchanged. In addition, this technique can also overcome the problem of setting detection thresholds which is inherent in existing techniques. The method proposed in this study has a small NDZ and is capable of detecting islanding accurately within the minimum standard time. Moreover, for those regions which require better visualization, the proposed approach can serve as an efficient aid for better detecting grid‐power disconnection. © 2014 Wiley Periodicals, Inc. Complexity 21: 195–205, 2015     

Wavelet neural network based on islanding detection via inverter‐based DG

In this article, a passive neurowavelet based on islanding detection technique for grid‐connected inverter‐based distributed generation has been developed. Connecting distributed generator to the distribution network has many benefits such as increasing the capacity of the grid and enhancing the power quality. However, it gives rise to many problems. This is mainly due to the fact that distribution networks are designed without any generation units at that level. Hence, integrating distributed generators into the existing distribution network is not problem‐free. Unintentional islanding is one of the encountered problems. Islanding is the situation where the distribution system containing both distributed generator and loads is separated from the main grid as a result of many reasons such as electrical faults and their subsequent switching incidents, equipment failures, or preplanned switching events like maintenance. The proposed method utilizes and combines wavelet analysis and artificial neural network to detect islanding. Discrete wavelet transform is capable of decomposing the signals into different frequency bands. It can be utilized in extracting discriminative features from the acquired voltage signals. Passive schemes have a large nondetection zone (NDZ) and concern has been raised on active method due to its degrading power quality effect. The main emphasis of the proposed scheme is to reduce the NDZ to as close as possible and to keep the output power quality unchanged. The simulations results, performed by MATLAB/Simulink, shows that the proposed method has a small NDZ. Also, this method is capable of detecting islanding accurately within the minimum standard time. © 2014 Wiley Periodicals, Inc. Complexity 21: 309–324, 2015     

Neuro-fuzzy based constraint programming

Constraint programming models appear in many sciences including mathematics, engineering and physics. These problems aim at optimizing a cost function joint with some constraints. Fuzzy constraint programming has been developed for treating uncertainty in the setting of optimization problems with vague constraints. In this paper, a new method is presented into creation fuzzy concept for set of constraints. Unlike to existing methods, instead of constraints with fuzzy inequalities or fuzzy coefficients or fuzzy numbers, vague nature of constraints set is modeled using learning scheme with adaptive neural-fuzzy inference system (ANFIS). In the proposed approach, constraints are not limited to differentiability, continuity, linearity; also the importance degree of each constraint can be easily applied. Unsatisfaction of each weighted constraint reduces membership of certainty for set of constraints. Monte-Carlo simulations are used for generating feature vector samples and outputs for construction of necessary data for ANFIS. The experimental results show the ability of the proposed approach for modeling constrains and solving parametric programming problems.     

A mathematical modeling for incorporating energy price hikes into total natural gas consumption forecasting

In some countries that energy prices are low, price elasticity of demand may not be significant. In this case, large increase or hike in energy prices may impact energy consumption in a way which cannot be drawn from historical data. This paper proposes an integrated adaptive fuzzy inference system (FIS) to forecast long-term natural gas (NG) consumption when prices experience large increase. To incorporate the impact of price hike into modeling, a novel procedure for construction and adaptation of Takagi–Sugeno fuzzy inference system (TS-FIS) is suggested. Linear regressions are used to construct a first order TS-FIS. Furthermore, adaptive network-based FIS (ANFIS) is used to forecast NG consumption in power plants. To cope with random uncertainty in small historical data sets, Monte Carlo simulation is utilized to generate training data for ANFIS. To show the applicability and usefulness of the proposed model, it is applied for forecasting of annual NG consumption in Iran where removing energy subsidies has resulted in a hike in NG prices.     

Adaptive fuzzy control‐based projective synchronization of uncertain nonaffine chaotic systems

This article aims to introduce a projective synchronization approach based on adaptive fuzzy control for a class of perturbed uncertain multivariable nonaffine chaotic systems. The fuzzy‐logic systems are employed to approximate online the uncertain functions. A Lyapunov approach is used to design the parameter adaptation laws and to demonstrate the boundedness of all signals of the closed‐loop system as well as the convergence of the synchronization errors to bounded residual sets. Finally, numerical simulation results are presented to verify the feasibility and effectiveness of the proposed synchronization system based on fuzzy adaptive controller. © 2014 Wiley Periodicals, Inc. Complexity 21: 180–192, 2015     

Adaptive fuzzy sliding mode control of the cart-pole underactuated system

In this work, an intelligent control scheme is proposed for the stabilization of the cart-pole underactuated system. The adopted approach is primarily based on a smooth sliding mode controller, but an adaptive fuzzy inference system is embedded within the boundary layer in order to improve the control performance. (© 2016 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

The Runge‐Kutta DG finite element method and the KFVS scheme for compressible flow simulations

This article presents a new type of second‐order scheme for solving the system of Euler equations, which combines the Runge‐Kutta discontinuous Galerkin (DG) finite element method and the kinetic flux vector splitting (KFVS) scheme. We first discretize the Euler equations in space with the DG method and then the resulting system from the method‐of‐lines approach will be discretized using a Runge‐Kutta method. Finally, a second‐order KFVS method is used to construct the numerical flux. The proposed scheme preserves the main advantages of the DG finite element method including its flexibility in handling irregular solution domains and in parallelization. The efficiency and effectiveness of the proposed method are illustrated by several numerical examples in one‐ and two‐dimensional spaces. © 2006 Wiley Periodicals, Inc. Numer Methods Partial Differential Eq, 2006     

Adaptive network-based fuzzy inference system with leave-one-out cross-validation approach for prediction of surface roughness

The prediction of surface roughness is a challengeable problem. In order to improve the prediction accuracy in end milling process, an improved approach is proposed to model surface roughness with adaptive network-based fuzzy inference system (ANFIS) and leave-one-out cross-validation (LOO-CV) approach. This approach focuses on both architecture and parameter optimization. LOO-CV, which is an effective measure to evaluate the generalization capability of mode, is employed to find the most suitable membership function and the optimal rule base of ANFIS model for the issue of surface roughness prediction. To find the optimal rule base of ANFIS, a new “top down” rules reduction method is suggested. Three machining parameters, the spindle speed, feed rate and depth of cut are used as inputs in the model. Based on the same experimental data, the predictive results of ANFIS with LOO-CV are compared with the results reported recently in the literature and ANFIS with clustering methods. The comparisons indicate that the presented approach outperforms the opponent methods, and the prediction accuracy can be improved to 96.38%. ANFIS with LOO-CV approach is an effective approach for prediction of surface roughness in end milling process.     

An adaptive network based fuzzy inference system–auto regression–analysis of variance algorithm for improvement of oil consumption estimation and policy making: The cases of Canada,United Kingdom,and South Korea

This paper presents an adaptive network based fuzzy inference system (ANFIS)–auto regression (AR)–analysis of variance (ANOVA) algorithm to improve oil consumption estimation and policy making. ANFIS algorithm is developed by different data preprocessing methods and the efficiency of ANFIS is examined against auto regression (AR) in Canada, United Kingdom and South Korea. For this purpose, mean absolute percentage error (MAPE) is used to show the efficiency of ANFIS. The algorithm for calculating ANFIS performance is based on its closed and open simulation abilities. Moreover, it is concluded that ANFIS provides better results than AR in Canada, United Kingdom and South Korea. This is unlike previous expectations that auto regression always provides better estimation for oil consumption estimation. In addition, ANOVA is used to identify policy making strategies with respect to oil consumption. This is the first study that introduces an integrated ANFIS–AR–ANOVA algorithm with preprocessing and post processing modules for improvement of oil consumption estimation in industrialized countries.     

Function vector synchronization based on fuzzy control for uncertain chaotic systems with dead‐zone nonlinearities

In this article, a fuzzy adaptive control scheme is designed to achieve a function vector synchronization behavior between two identical or different chaotic (or hyperchaotic) systems in the presence of unknown dynamic disturbances and input nonlinearities (dead‐zone and sector nonlinearities). This proposed synchronization scheme can be considered as a generalization of many existing projective synchronization schemes (namely the function projective synchronization, the modified projective synchronization, generalized projective synchronization, and so forth) in the sense that the master and slave outputs are assumed to be some general function vectors. To practically deal with the input nonlinearities, the adaptive fuzzy control system is designed in a variable‐structure framework. The fuzzy systems are used to appropriately approximate the uncertain nonlinear functions. A Lyapunov approach is used to prove the boundedness of all signals of the closed‐loop control system as well as the exponential convergence of the corresponding synchronization errors to an adjustable region. The synchronization between two identical systems (chaotic satellite systems) and two different systems (chaotic Chen and Lü systems) are taken as two illustrative examples to show the effectiveness of the proposed method. © 2015 Wiley Periodicals, Inc. Complexity 21: 234–249, 2016     

Modelling on fuzzy control systems

A kind of modelling method for fuzzy control systems is first proposed here, which is called modelling method based on fuzzy inference (MMFI). It should be regarded as the third modelling method that is different from two well-known modelling methods, that is, the first modelling method, mechanism modelling method (MMM), and the second modelling method, system identification modelling method (SIMM). This method can, based on the interpolation mechanism on fuzzy logic system, transfer a group of fuzzy inference rules describing a practice system into a kind of nonlinear differential equation with variable coefficients, called HX equations, so that the mathematical model of the system can be obtained. This means that we solve the difficult problem of how to get a model represented as differential equations on a complicated or fuzzy control system.     

一个最优的模糊逼近器

In a dot product space with the reproducing kernel (r. k. S. ) ,a fuzzy system with the estimation approximation errors is proposed ,which overcomes the defect that the existing fuzzy control system is difficult to estimate the errors of approximation for a desired function,and keeps the characteristics of fuzzy system as an inference approach. The structure of the new fuzzy approximator benefits a course got by other means.     

Regularized Adaptation of Fuzzy Inference Systems. Modelling the Opinion of a Medical Expert about Physical Fitness: An Application

This study presents a new approach to adaptation of Sugeno type fuzzy inference systems using regularization, since regularization improves the robustness of standard parameter estimation algorithms leading to stable fuzzy approximation. The proposed method can be used for modelling, identification and control of physical processes. A recursive method for on-line identification of fuzzy parameters employing Tikhonov regularization is suggested. The power of approach was shown by applying it to the modelling, identification, and adaptive control problems of dynamic processes. The proposed approach was used for modelling of human-decisions (experience) with a fuzzy inference system and for the fuzzy approximation of physical fitness with real world medical data.     

A general fuzzy control scheme for nonlinear processes with stability analysis

In this paper we develop a general fuzzy control scheme for nonlinear processes. Assuming little knowledge about the dynamics of the controlled process, the proposed scheme starts by probing the process at different points in its operating region to generate a fuzzy quantisation. A simple local controller is then designed at each fuzzy locality. A fuzzy inference mechanism then links up tje local controllers to form a global controller which can be further refined by the learning algorithm. By employing a newly developed structure-adaptive fuzzy modelling scheme, the appropriate fuzzy rule-base for the inference mechanism can be extracted stably and efficiently. The conditions for the stability of the global controller are rigourously established. Simulation results are presented to illustrate the effectiveness of the scheme.     

Modeling the relationship between hydrogen content and mechanical property of Ti600 alloy by using ANFIS

An adaptive network based fuzzy inference system (ANFIS) was used to predict the tensile strength of Ti600 alloy after hydrogenation. In this approach, the whole procedure of structure identification and parameter optimization was carried out automatically and efficiently. Two major influence factors were considered as input variables including hydrogenation temperature ranging of 600–750 °C and hydrogen content ranging of 0–0.502 wt.%, two different membership functions, triangular and Gaussian, were employed as fuzzy subset to compare the model accuracy. After the training and testing process, the predicted values were compared with experimental result and multiple linear regression values. It is found that the ANFIS predicted values with Gaussian and Triangular membership function were in good agreement with the experimental results with relative error of 2.69% and 2.77%, which has a equal accuracy but higher than multiple linear regression method with the error of 16.74%. Such modeling approach for the hydrogenation of titanium alloy can be highly beneficial since it offers the possibility of identifying promising processing parameters without the necessity for extensive experimental test cycles.     

Shape optimal design of arch dams using an adaptive neuro-fuzzy inference system and improved particle swarm optimization

An efficient methodology is proposed to find the optimal shape of arch dams including fluid–structure interaction subject to earthquake ground motion. In order to reduce the computational cost of optimization process, an adaptive neuro-fuzzy inference system (ANFIS) is built to predict the dam effective response instead of directly evaluating it by a time-consuming finite element analysis (FEA). The presented ANFIS is compared with a widespread neural network termed back propagation neural network (BPNN) and it appears a better performance generality for estimating the dam response. The optimization task is implemented using an improved version of particle swarm optimization (PSO) named here as IPSO. In order to assess the effectiveness of the proposed methodology, the optimization of a real world arch dam is performed via both IPSO–ANFIS and PSO–BPNN approaches. The numerical results demonstrate the computational advantages of the proposed IPSO–ANFIS for optimal design of arch dams when compared with the PSO–BPNN approach.     

基于插值机理的分布参数系统T-S模糊推理建模

研究分布参数系统的建模问题,给出一种基于T-S模糊推理与HX方法的T-S型模糊三角插值推理建模方法,满足插值机理.理论分析表明方法可利用有限的采样数据推断分布参数系统的时空变化规律.仿真实验显示方法是有效的,且具有建模精度较高的特点.     

Design of an active fault tolerant control system for a simulated industrial steam turbine

An active fault tolerant control (FTC) scheme is proposed in this paper to accommodate for an industrial steam turbine faults based on integration of a data-driven fault detection and diagnosis (FDD) module and an adaptive generalized predictive control (GPC) approach. The FDD module uses a fusion-based methodology to incorporate a multi-attribute feature via a support vector machine (SVM) and adaptive neuro-fuzzy inference system (ANFIS) classifiers. In the GPC formulation, an adaptive configuration of its internal model has been devised to capture the faulty model for the set of internal steam turbine faults. To handle the most challenging faults, however, the GPC control configuration is modified via its weighting factors to demand for satisfactory control recovery with less vigorous control actions. The proposed FTC scheme is hence able to systematically maintain early FDD with efficient fault accommodation against faults jeopardizing the steam turbine availability. Extensive simulation tests are conducted to explore the effectiveness of the proposed FTC performances in response to different categories of steam turbine fault scenarios.     

Multiple criteria decision making method based on normal interval‐valued intuitionistic fuzzy generalized aggregation operator

On the basis of the normal intuitionistic fuzzy numbers (NIFNs), we proposed the normal interval‐valued intuitionistic fuzzy numbers (NIVIFNs) in which the values of the membership and nonmembership were extended to interval numbers. First, the definition, the properties, the score function and accuracy function of the NIVIFNs are briefly introduced, and the operational laws are defined. Second, some aggregation operators based on the NIVIFNs are proposed, such as normal interval‐valued intuitionistic fuzzy weighted arithmetic averaging operator, normal interval‐valued intuitionistic fuzzy ordered weighted arithmetic averaging operator, normal interval‐valued intuitionistic fuzzy hybrid weighted arithmetic averaging operator, normal interval‐valued intuitionistic fuzzy weighted geometric averaging operator, normal interval‐valued intuitionistic fuzzy ordered weighted geometric averaging operator, normal interval‐valued intuitionistic fuzzy hybrid weighted geometric averaging operator, and normal interval‐valued intuitionistic fuzzy generalized weighted averaging operator, normal interval‐valued intuitionistic fuzzy generalized ordered weighted averaging operator, normal interval‐valued intuitionistic fuzzy generalized hybrid weighted averaging operator, and some properties of these operators, such as idempotency, monotonicity, boundedness, commutativity, are studied. Further, an approach to the decision making problems with the NIVIFNs is established. Finally, an illustrative example is given to verify the developed approach and to demonstrate its practicality and effectiveness. © 2015 Wiley Periodicals, Inc. Complexity 21: 277–290, 2016