少子寿命和表面形貌与多孔硅发光性能的关系

研究了不同时间腐蚀的多孔硅的光致发光性能与多孔硅的表面形貌和少子寿命之间的关系。结果表明,多孔硅的发光来自与氧空位有关的缺陷,而多孔硅表面的氢原子能够钝化多孔硅表面的非辐射中心从而提高多孔硅的发光效率。多孔硅的空隙度随腐蚀时间的延长而增大,这也导致了多孔硅的少子寿命的降低,从而造成多孔硅的光致发光效率随多孔硅空隙度的增大以及少子寿命的降低而提高。另外,原子力显微照片表明长时间的腐蚀使多孔硅表面层被化学腐蚀,从而降低了多孔硅表面的粗糙度。     

氢等离子体气氛中退火多孔硅的表面和光荧光特性

用电化学腐蚀法制备了多孔硅(PS),在氢等离子体气氛中不同温度下对多孔硅样品进行了退火处理,并进行了光致发光(PL)谱和原子力显微镜(AFM)表面形貌的测量。不同退火温度给PS表面形态带来较大变化,也影响了其PL谱特性。在退火的样品中观察到的PL谱高效蓝光和紫光谱带,我们认为主要源于量子限制发光峰和非平衡载流子被带隙中浅杂质能级所俘获而引起的辐射复合所产生的。在420—450℃退火处理的多孔硅的PL谱上观察到了一个未见诸于报道的紫光新谱带(3．24eV,382nm),其发光机理有待于进一步研究。     

发光多孔硅表面微结构及其晶格畸变的实验研究

用电化学方法制备了不发光多孔硅和发光多孔硅,用X射线双晶衍射对两类多孔硅表面进行了微结构分析和晶体质量表征,实验表明两类多孔硅的微结构间存在着很大差别。不发光多孔硅表面对X射线的双晶衍射摇摆曲线可解叠成两个峰,它们分别来自样品多孔层和单晶硅衬底,而发光多孔硅对X射线的双晶衍射摇摆曲线呈高斯对称分布,不可解叠。发光多孔硅比不发光多孔硅表面晶体质量差,且电化学腐蚀越严重,表面晶体质量下降也越严重。     

稀土Nd,Ce掺杂硅基薄膜光致发光特性

测量了Nd,Ce稀土离了注入Si基晶片，在不同离子注入剂量、不同退火条件下的室温光致发光（PL）谱，结果表明它们均具有蓝、紫发光峰，且发光稳定。在一定范围内发光效率随掺杂浓度的增加而增大，随退火条件的不同而改变。运用原子力显微镜（AFM）对样品的表面形貌进行了观察，结果显示，样品表面颗粒大小、粗糙度将影响其发光效率。表面颗粒大小均匀，均方根粗糙度小的样品发光效率较高。通过对样品的卢瑟福背散射（RBS）能谱测量，对样品的表面结构进行了探讨，并讨论了表面结构与光致发光特性之间的联系。对样品的发光机理作了初步探讨。     

多孔硅的制备条件对其光致发光特性的影响

不同的实验条件下制备的多孔硅的光致发光(PL)特性是不同的,这是许多研究产生分歧的主要原因。对比分析了阳极氧化电流密度、阳极氧化时间、溶液浓度以及自然氧化时间对多孔硅光致发光光谱的影响。认为在一定的范围内,多孔硅的发光峰位会随电流密度的增大而蓝移,要获得较强的发光,需要选择合适的电流密度;随着腐蚀时间的延长,多孔硅的发光峰位也发生蓝移。当HF酸的浓度较小时,峰位随浓度的增大表现为向低能移动;而当HF酸的浓度较大时,峰位随浓度的增大则表现为移向高能。多孔硅在空气中自然氧化,其发光峰位发生蓝移,而发射强度随放置时间的延长而降低。并用量子限制模型和发光中心模型对实验结果进行解释。     

多孔硅中的1.54μm光发射

本文报道了利用离子注入技术制备多孔硅中Er³⁺的1.54μm光发射发光材料的实验,并对样品的低温光致发光特性进行了实验研究。实验表明多孔硅中的Er³⁺发光与单晶硅中的Er³⁺发光(同样注入条件,退火工艺制备)相比,发光强度有成数量级的提高,同时发光峰更宽,伴线更丰富。     

多孔硅后处理对其镶嵌染料光学特性的影响

对多孔硅进行真空退火处理和暴露大气快速退火处理,将有机染料香豆素102(C102)镶嵌其中,研究镶嵌复合膜发光特性的变化。通过比较多孔硅退火处理前、后傅立叶红外(FT-IR)吸收光谱的变化,从多孔硅与镶嵌染料分子间的能量传递方式角度出发,解释了PS表面态氧化能改善镶嵌复合膜发光特性的原因。实验通过改变多孔硅表面态,提高了复合膜的发光效率和多孔硅基体的透明程度,证明了多孔硅是一种良好的载体,在发展固体激光器方面有一定的应用,同时为实现硅基蓝绿发光开辟一条新的途径。     

多孔硅光致发光峰半峰全宽的压缩

硅发光对于在单一硅片上实现光电集成是至关重要的.目前已有的使硅产生发光的方法有:掺杂深能级杂质、掺稀土离子、多孔硅、纳米硅以及Si/SiO₂超晶格.声空化所引发的特殊的物理、化学环境为制备光致发光多孔硅薄膜提供了一条重要的途径.实验表明,声化学处理对于改善多孔硅的微结构,提高发光效率和发光稳定性都是一项非常有效的技术.超声波加强阳极电化学腐蚀制备发光多孔硅薄膜,比目前通用的常规方法制备的样品显示出更优良的性质.这种超声波的化学效应源于声空化,即腐蚀液中气泡的形成、生长和急剧崩溃.在多孔硅的腐蚀过程中,由于超声波的作用增加了孔中氢气泡的逸出比率和塌缩,有利于孔沿垂直方向的腐蚀,使多孔硅光致发光峰的半峰全宽压缩到了3.8nm.     

不同退火条件对纳米多孔氧化铝薄膜光致发光的影响

以草酸为电解液,采用二次阳极氧化法制备出了纳米多孔氧化铝薄膜,经不同退火温度和退火气氛处理氧化铝薄膜后,通过分析其光致发光光谱得出：相同的退火气氛中, 退火温度T≤600 ℃ 时,T=500 ℃具有最大的光致发光强度;退火温度T≥700 ℃时,随着退火温度的升高,样品的发光强度增大。在不同的退火气氛中,多孔氧化铝薄膜随着退火温度的升高,发光峰位改变不同,即在空气中退火处理后,随着退火温度的升高,发光峰位蓝移,而在真空中退火处理后,发光峰位并不随退火温度的升高而变化;通过对1 100 ℃高温退火处理后的氧化铝薄膜的光致发光曲线的高斯拟合,可以看出,经退火处理后的多孔氧化铝,主要存在三个发光中心,发光曲线在350～600 nm范围内对应三个发射峰, 发射波长分别为387,410,439 nm。相同的退火温度下,空气中退火得到的氧化铝薄膜的光致发光强度大于真空中退火处理后的氧化铝薄膜。基于实验结果,结合X射线色散能谱(EDS)、红外反射光谱等表征手段,探讨了多孔氧化铝薄膜的发光机制,并对经过不同退火条件得到的多孔氧化铝薄膜的光致发光特性的改变做出了合理的解释。     

水蒸气退火多孔硅发光性能的正电子谱学研究

使用正电子湮没寿命谱和正电子寿命-动量关联谱对水蒸气和真空条件下退火的多孔硅样品的微观缺陷结构进行表征,结合发射光谱测量结果,对影响多孔硅发光性能的因素进行了讨论.实验结果表明,水蒸气退火后样品孔壁表面的悬挂键减少,并出现新的E′γ和EX类缺陷.水蒸气退火后样品中两种缺陷数量发生变化是导致多孔硅样品发光增强的直接原因;真空退火未使样品中发光相关缺陷发生变化,样品的发光性能没有显著改变.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.