Synthesis and characterization of core–shell polyacrylate latex containing fluorine/silicone in the shell and the self-stratification film

A series of core–shell polyacrylate latexes with different fluorine/silicone monomer concentrations were prepared successfully by seeded emulsion polymerization. Dodecafluoroheptyl methacrylate and perfluorooctyl methacrylate with different fluorinated side chains were employed as fluorinated monomers, and γ-methacryloxypropyl triisopropoxidesilane (MAPTIPS) was used as a silicone-containing monomer as well as a self-cross-linking agent. The morphology and chemical structure of the latexes were characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and differential scanning calorimetry, and the self-stratification properties of the latex film were verified by X-ray photoelectron spectroscopy and static contact angle measurement. The results showed that the fluorine/silicone-containing polyacrylate latexes presented a uniformly spherical core–shell structure, and the latex films displayed a preferential distribution of fluorinated composition near the surface, which was more remarkable with the synergism effect between the fluorine monomer and MAPTIPS. Additionally, the hydrophobicity and oleophobicity of the latex films exhibited high relevance with the fluorine/silicone monomer concentrations as well as the fluorinated side-chain structure.     

Convenient synthesis of novel fluorinated polyurethane hybrid latexes and core-shell structures via emulsion polymerization process with self-emulsification of polyurethane

Novel fluorinated polyurethane hybrid latexes in the size range of 40–50 nm, fluoroalkyl acrylate as fluorinated monomers, with various fluorine content (F% = 9∼26 wt%) were successfully prepared via emulsion polymerization process without traditional emulsifier. The waterborne polyurethane, which was synthesized by using isophronediisocyanate, dimethylol propionic acid, polyethylene glycols, etc., served not only as copolymerizable macromonomer but also as polymeric high molecular weight emulsifier. The structures of polyurethane macromonomer and fluorinated polyurethane were characterized by Fourier transform infrared and H¹-NMR. Particle size, zeta potential, micromorphology of the latex par.ticles, and surface properties were investigated by dynamic light scattering, potential particle size analyzer, transmission electron microscopy, and contact angle measurement, respectively. Results illustrated that the advantage of this process is that the size of fluorinated polyurethane hybrid particle is less sensitive to the composition. Furthermore, it was showed that fluorinated polyurethane latex particles had core-shell structures, especially when the content of fluorine was 26.08 wt%. Moreover, there was an obvious migration of fluorinated groups to the surface during the formation of fluorinated polymer films, although fluorinated groups were covered by polyurethane in latex particles.     

Surface self-segregation, wettability, and adsorption behavior of core-shell and pentablock fluorosilicone acrylate copolymers

The surfaces of films cast from core-shell fluorosilicone acrylate copolymer (BA/MMA/DFHM and BA/MMA/DFHM/MPTMS/D(4)) latexes and linear pentablock fluorosilicone acrylate copolymer (PDMS-b-(PMMA-b-PDFHM)(2)) solutions are intensively investigated and compared by XPS, DCA, AFM, and QCM-D measurements. It is found that the molecular structures and in-solution aggregate structures of these well-defined copolymers have a dramatic influence on the surface structure formation, surface wetting, and adsorption behavior. The PDMS-b-(PMMA-b-PDFHM)(2) film cast from chloroform solution with high concentration of low-density unimers is able to perform as strong surface self-segregation of fluorine-containing groups as core-shell copolymer latex films. The BA/MMA/DFHM/MPTMS/D(4) in the core-shell latex particles exhibits the less pronounced surface self-segregation of silicon-containing groups than PDMS-b-(PMMA-b-PDFHM)(2) due to the occurrence of cross-linking reactions between polysiloxane chains. Indeed, such reactions induce the formation of silica network within the film material, which immobilizes tightly the fluorinated groups on the film surface and thus endows the film with higher surface structural stability for water compared to PDMS-b-(PMMA-b-PDFHM)(2) film with similar surface fluorine concentration and even higher silicon concentration. Still, the PDMS-b-(PMMA-b-PDFHM)(2) film definitely demonstrates higher advancing and receding contact angles for water than BA/MMA/DFHM/MPTMS/D(4) latex film in the case of synergism between surface enrichment of fluorine and silicon.     

Synthesis and characterization of a new fluorinated macroinitiator and its diblock copolymer by AGET ATRP

A new fluorinated macroinitiator of poly 2,2,3,4,4,4-hexafluorobutyl methacrylate-Br (PHFMA-Br) was prepared via activator generated by electron transfer atom transfer radical polymerization (AGET ATRP), and then a series of fluorinated block copolymers with different fluorine content were successfully synthesized from the macroinitiator by the second step AGET ATRP. GPC, FTIR and ¹H NMR data obtained verified the synthesis. Contact angle measurement indicated that proper fluorine content could decrease the surface energy and increase the contact angle of the copolymer films. XPS characterization showed that the large difference in surface energy between the block and random copolymer film resulted from the difference of the fluorine content on the surface, although the fluorine content of the two copolymers in bulk was similar. The self-assembly behavior of the fluorinated block copolymer in selective solvents was evaluated by the TEM study, and the stable micelles with a core-shell structure were observed when the copolymer content was about 1 wt%.     

The suspension�Cemulsion combined polymerization of fluorinated acrylic monomer and the fluorinated latex film surface properties

The perfluoroacrylate-containing copolymer composite particles were fabricated by suspension?Cemulsion combined polymerization (SECP). The features and formation mechanism of resulting polymer particles in SECP were studied. The fluorinated latexes with better stability and those fluorinated films with high surface fluorine content were prepared by SECP using fluorine-free surfactants as an emulsifying agent, and the surface natures of the fluorinated films were characterized. It was found that P(MMA?CBA) latex particles gradually coagulated with P(PFA?CBA) particles after adding emulsion polymerization constituents at the midstage of the suspension polymerization, and fluorinated composite particles with core?Cshell structure and larger size were obtained. The fluorine contents either on the film surface or in the bulk of the film and the films from SECP are higher than those from miniemulsion polymerization at high PFA feed ratio (more than 20?wt.%). The model of PFA?CMMA?CBA SECP was proposed according to the variations of particle features of the composite particles.     

Langmuir monolayers and the transferred films of fluorinated amphiphiles containing vinyl groups

The monolayer behavior of long-chain esters of acrylic and methacrylic acids containing perfluoro or partially fluorinated carbon chains at the air/water interface was studied by surface pressure-area isotherm measurements and Brewster angle microscopy. It has been found that a minor change in the chemical structures of these fluorinated amphiphiles, such as a hydrogen substituted at the omega-position of the hydrophobic fluorocarbon tails instead of a fluorine as well as hydrophilic vinyl ester groups inserted between acrylates and methacrylates, induces a drastic change in the isotherms for the monolayers, suggesting different molecular orientation and packing in the films. The monolayers were transferred by horizontal lifting, Langmuir-Blodgett, and surface-lowering methods to give the X-, Y-, and Z-type films, respectively. These films were characterized by scanning probe microscopy, to clarify the mesoscopic surface structures of the molecular films exposed with the hydrophilic or hydrophobic moieties in air, depending upon the dipping methods. The Z-type films with the outermost surface of the fluorinated substituents were examined in relation to the frictional properties that strongly depend upon the fluorine and the hydrogen atoms at the end of the hydrophobic fluorocarbon chains, which is controllable at the atomic level.     

Synthesis and surface properties of novel fluorinated polyurethane base on F‐containing chain extender

A novel fluorinated chain extender, (1‐(ethyl(2‐hydroxyethyl)amino)‐3‐ ((3,3,4,4,5,5,6,6,7,7,8,8,8‐tridecafluorooctyl)oxy)propan‐2‐ol) (FPO), was synthesized and characterized by nuclear magnetic resonance (NMR), Fourier transform infrared (FTIR), and elemental analysis. Poly (ether urethane)s containing various amounts of the chain extender with fluorinated side chains (FPUs) were prepared by isophorone diisocyanate (IPDI), polytetra‐methylene‐ether‐glycol (PTMG), 3‐aminopropyltriethoxysilane (KH‐550), and 1,4‐butandiol (BDO). Films of FPUs were investigated by water absorption, contact angle, pencil hardness, adhesive force, and thermal analysis. Coating FPUs on micro‐nano concave‐convex structure plate realizes superhydrophobic performance. Scanning electron microscope (SEM) and atomic force microscopy (AFM) demonstrated that there is a lot of irregular concave‐convex structure, which forms a typical air cushion model. X‐ray photoelectron spectroscopy (XPS) analysis showed that surface fluorine content is 165% more than that of film average fluorine content. The superhydrophobic plate with 10% or higher F‐containing FPUs coating is of outstanding chemical corrosion resistance, excellent solvent resistance, and wear resistance.     

Preparation and applications of a variety of fluoroalkyl end-capped oligomer/hydroxyapatite composites

A variety of fluoroalkyl end-capped oligomers were applied to the preparation of fluorinated oligomer/hydroxyapatite (HAp) composites (particle size: 38-356 nm), which exhibit a good dispersibility in water and traditional organic solvents. These fluoroalkyl end-capped oligomer/HAp composites were easily prepared by the reactions of disodium hydrogen phosphate and calcium chloride in the presence of self-assembled molecular aggregates formed by fluoroalkyl end-capped oligomers in aqueous solutions. In these fluorinated HAp composites thus obtained, fluoroalkyl end-capped acrylic acid oligomers and 2-methacryloyloxyethanesulfonic acid oligomer/HAp nanocomposites afforded transparent colorless solutions toward water; however, fluoroalkyl end-capped N,N-dimethylacrylamide oligomer and acryloylmorpholine oligomer were found to afford transparent colorless solutions with trace amounts of white-colored HAp precipitants under similar conditions. HAp could be encapsulated more effectively into fluorinated 2-methacryloyloxyethanesulfonic acid oligomeric aggregate cores to afford colloidal stable fluorinated oligomer/HAp composites, compared to that of fluorinated acrylic acid oligomers. These fluorinated oligomer/HAp composites were applied to the surface modification of glass and PVA to exhibit a good oleophobicity imparted by fluorine. HAp formation was newly observed on the modified polyethylene terephthalate film surface treated with fluorinated 2-methacryloyloxyethanesulfonic acid oligomers and acrylic acid oligomer/HAp composites by soaking these films into the simulated body fluid.     

SURFACE STRUCTURE AND BULK PROPERTIES OF FLUORINATED POLY(ETHER URETHANE)S AND POLY(ETHER URETHANE) BLENDS

INTRODUCTIONPolyurethanes (PU) have been widely used for manufacturing medical devices because of their excellentmechanical properties and moderate biocompatibility[1]. Although polyurethanes used in applications requiringall of the above properties have been successful for short-term use, the problems of long-term thromboresistanceand biostability in a biological environment still remain unsolved[2,3]. A legitimate approach to improving theproperties of polyurethanes is introduction of f…     

EFFECT OF THE PHASE STRUCTURE EVOLUTION ON THE PROPERTIES OF FILMS FORMED FROM PBA/P(St-co-MMA) COMPOSITE LATEX

A group of heterogeneous latexes poly(butyl acrylate)/poly(styrene-co-methyl methacrylate)(PBA/P(St-co-MMA)) were prepared by a semi-continuous seeded emulsion polymerization process under monomer starved conditions.The glass transition temperature(T_g)and the mechanical properties of the film formed from the composite latex changed with the evolution of the particle morphology.A photon transmission method was used to monitor the phase structure evolution of films which were prepared from core-shell PBA/...     

Surface modification of high heat resistant UV cured polyurethane dispersions

To modify the surface of UV cured polyurethane dispersion (UV-PUD), fluorinated PU called surface modifying agent (SMA) was blended with base PU prior to dispersion in water. X-ray photoelectron spectroscopy (XPS) and contact angle measurements showed that surfaces of dispersion cast film are significantly enriched with fluorine groups. Atomic force microscopy (AFM) showed that surface was roughened with the addition of SMA, which provided possible mechanism of increased water resistance as well as low friction coefficient of the film. On the other hand, hardness, mechanical and dynamic mechanical properties indicated that the bulk properties are marginally altered by the additive amount of SMA.     

AFM imaging and characterization of latex particles formed by copolymerization of styrene and poly(ethylene oxide) macromonomer

A new type of latex particle was prepared by copolymerization of styrene and poly(ethylene oxide) macromonomer. By controlling the concentration of styrene in reaction mixtures, several latexes with different grain sizes were obtained. The packing patterns of the latex films as well as shapes and sizes of the latex particles were measured with atomic force microscopy (AFM). AFM images revealed that the grain sizes of the latexes increase with increasing concentration of styrene. At a higher styrene concentration (10 wt%), the latex showed a rather homogenous distribution of grain sizes. Lateral force microscopy (LFM) was used to reveal frictional features of latex particles. Contact and non-contact mode AFM were employed to image the same sample of the latex films. The results show that AFM working in non-contact mode can be used to effectively eliminate the horizontal-line-like artifacts, which may obscure AFM images.     

含氟/硅丙烯酸酯核壳型乳液的合成及性能

采用半连续种子乳液聚合法, 在十二烷基硫酸钠(SDS)/辛基苯基聚氧乙烯醚(TX-10)复合乳化剂的作用下, 合成了以丙烯酸丁酯(BA)为核, 以甲基丙烯酸甲酯(MMA)、甲基丙烯酸十二氟庚酯(DFHMA)、3-(甲基丙烯酰氧)丙基三甲氧基硅烷(MPTMS)和甲基三甲氧基硅烷(MTMS)为壳的核壳型含氟/硅丙烯酸酯聚合物乳液. 利用FTIR, TEM, SEM-EDX和DSC等手段对乳液组成、乳胶粒子结构、膜表面及断面形态等进行了表征, 讨论了氟/硅含量对聚合物膜性能的影响. 结果表明, 核-壳粒子尺寸为20~30 nm, 乳液膜的性能与膜表面氟和硅的含量及相容性有较大的相关性, 当m(氟)∶m(硅单体)=3∶1时, 形成的膜均匀透明, 吸水率较低, 尺寸稳定性较好.     

Preparation and characterization of emulsifier-free core–shell interpenetrating polymer network-fluorinated polyacrylate latex particles

The emulsifier-free core–shell interpenetrating polymer network (IPN) fluorinated polyacrylate latex particles with fluorine rich in shell were prepared by emulsifier-free seeded emulsion polymerization with water as the reaction medium. The fluorinated copolymer could be fixed on the particle surface due to the formation of interpenetrating polymer network. The resultant core–shell particles were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), dynamic light scattering (DLS) analysis, Fourier transform infrared (FTIR) spectrometry, X-ray photoelectron spectroscopy (XPS) analysis and thermogravimetric analysis (TGA). The core–shell particles possessed very narrow monomodal particle size distributions. XPS analysis of the latex film displayed that perfluoroalkyl groups had the tendency to enrich at surface and there was a gradient concentration of fluorine in the structure of the latex film from the film–air interface to the film–glass interface. In addition, compared with the latex film of crosslinked polyacrylate prepared under the same condition, the emulsifier-free core–shell IPN-fluorinated polyacrylate latex film showed better thermal stability, higher contact angle and lower water uptake.     

Preparation and Surface Properties of Fluorine‐Containing Diblock Copolymers PLMA‐Block‐PFAEA

A series of fluorine‐containing diblock copolymers based on lauryl methacrylate and 1H,1H,2H,2H‐perfluoroalkyl acrylate have been prepared by atom transfer radical polymerization (ATRP). The preparation process of PLMA‐Br macroinitiators was controlled within a reasonable time corresponding to the ln [M₀]/[M_t]～time plot of the reaction. FTIR, ¹H‐NMR, GPC and fluorine‐element analysis (FEA) were used to characterize the synthesized block copolymers. The solid surface activity of these polymers was demonstrated by contact angle measurement. The polymer films prepared by block copolymers with more than three fluorinated units showed low dispersion force contributions to the surface energy indicating the presence of the fluorinated block at the surface. The surface activity in solutions was measured by drop‐weight method. Ii is interesting to find, when the fluorine weight percentage is controlled constant, that PLMA‐b‐PFAEA with larger molecular size is more prominent in exploiting the fluorinated structure to reduce the surface tension of solutions. The block copolymer's ability in reducing surface tension of solutions also depends on the type of solvent.     

核壳型含氟丙烯酸酯共聚物的合成及性能

采用饥饿态半连续种子乳液聚合方法, 在十二烷基硫酸钠(SDS)/辛基苯基聚氧乙烯醚(TX-10)复合乳化剂的作用下, 分别选用甲基丙烯酸三氟乙酯(TFEM)、甲基丙烯酸六氟正丁酯(HFBM)和甲基丙烯酸十二氟庚酯(DFHM)为含氟单体, 合成以丙烯酸正丁酯(BA)、甲基丙烯酸甲酯(MMA)和含氟单体为原料的核壳型结构含氟丙烯酸酯共聚物乳液. FTIR, 1H NMR, TEM和DSC分析结果显示, 获得了BA/MMA/含氟单体的共聚物乳液, 且乳液具有明显的核壳结构. DSC, TGA和SEM-EDX的分析显示, 核壳型结构的共聚物具有优异的热力学稳定性能和成膜性能; 长侧链或短侧链含氟单体对共聚物的热稳定性影响不明显, 但侧链较长的含氟单体所获得的聚合物在成膜过程中更易向表面迁移, 更能体现含氟聚合物的优点.     

Wetting kinetics of oil mixtures on fluorinated model cellulose surfaces

The wetting of two different model cellulose surfaces has been studied; a regenerated cellulose (RG) surface prepared by spin-coating, and a novel multilayer film of poly(ethyleneimine) and a carboxymethylated microfibrillated cellulose (MFC). The cellulose films were characterized in detail using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). AFM indicates smooth and continuous films on a nanometer scale and the RMS roughness of the RG cellulose and MFC surfaces was determined to be 3 and 6 nm, respectively. The cellulose films were modified by coating with various amounts of an anionic fluorosurfactant, perfluorooctadecanoic acid, or covalently modified with pentadecafluorooctanyl chloride. The fluorinated cellulose films were used to follow the spreading mechanisms of three different oil mixtures. The viscosity and surface tension of the oils were found to be essential parameters governing the spreading kinetics on these surfaces. XPS and dispersive surface energy measurements were made on the cellulose films coated with perfluorooctadecanoic acid. A strong correlation was found between the surface concentration of fluorine, the dispersive surface energy and the contact angle of castor oil on the surface. A dispersive surface energy less than 18 mN/m was required in order for the cellulose surface to be non-wetting (theta e>90 degrees ) by castor oil.     

POSS基杂化含氟丙烯酸酯共聚物涂膜的表面相分离与疏水性研究

采用自由基溶液聚合法成功合成了多面体低聚倍半硅氧烷(POSS)基杂化含氟丙烯酸酯共聚物,并采用核磁共振仪(NMR)和凝胶渗透色谱仪(GPC)表征了共聚物,其中POSS和含氟单体分步加入到反应中.首先将共聚物溶解到三氟三氯乙烷(F113)和乙酸乙酯的混合溶剂中配制成溶液,然后通过直接在玻璃片上滴落共聚物溶液制备了共聚物涂膜.采用扫描电子显微镜(SEM)、X-射线光电子能谱(XPS)、原子力显微镜(AFM)和接触角测量仪考察了F113和乙酸乙酯的配比对共聚物涂膜表面形貌、表面元素组成、表面粗糙度以及表面疏水性的影响.实验数据表明POSS在表面能够聚集成纳米颗粒并能极大增强涂膜表面粗糙度和疏水性.共聚物表面同时存在POSS聚集与有机相微相分离两类相分离行为,并形成了复合粗糙结构.虽然POSS和含氟段竞争迁移到表面,但是随着混合溶剂中F113的增多,涂膜表面含氟量越来越多,同时POSS在表面的聚集体越来越少,表面平均粗糙度越来越小,最终涂膜的疏水性越来越强,这说明F113有助于提升氟的趋表迁移能力,使涂膜表面含氟链段占据较多的表面空间,从而抑制了POSS在表面聚集分布.当使用纯F113作为溶剂时,共聚物涂膜的表面氟含量为45.25%,平均粗糙度为93.4 nm,此时静态水接触角最大为135.0?,表现出优异的疏水性.     

Carboxylic‐group distribution of carboxylated acrylate copolymer latexes with their properties in the presence of acrylic acid and monobutyl itaconate

A series of carboxylated acrylate copolymer latexes were prepared via two different emulsion polymerization technologies with different carboxylic‐group distribution and morphologies. The effects of the emulsifier, the initiator, and the carboxylic monomers [acrylic acid (AA) or monobutyl itaconate (MBI)] on the total conversion of the monomers and the properties of acrylate latexes and films have been investigated. The distribution of carboxylic groups (?COOH) measured by conductometric titration shows that the concentration of surface –COOH (C_s) and embedded –COOH (C_b) both increase with the increase of the amount of carboxylic monomers. For the latexes containing AA, –COOH tends to distribute on the surface of latex particles and in the aqueous phase, whereas –COOH tends to concentrate inside the core of latex particles for the latexes containing MBI. Transmission electron microscopy demonstrates that the latex particles are regular with narrow size distribution and have significant differences in morphologies when different carboxylic monomers and polymerization technologies were used. The stability of latex is satisfactory through the results of common stability and zeta potential tests. Moreover, the water absorption and contact angle experiment tests also revealed that the water resistance of the latex films is good. Copyright © 2011 John Wiley & Sons, Ltd.     

成膜溶剂与氟化嵌段共聚物膜的表面富集行为

利用接触角、XPS、SFG、AFM等技术研究了环己酮、甲苯和三氟甲苯为成膜溶剂所得聚甲基丙烯酸甲酯-b-聚（甲基丙烯酸-2-全氟辛基乙酯）（PMMA—b—PFMA）嵌段共聚物膜的表面结构与性能．发现浇铸成膜时成膜溶剂对聚合物氟化组分向表面富集程度的影响相对较小,而旋涂成膜时溶剂的影响很大．不管以何种形式成膜,三氟甲苯溶剂最有利于氟化组分向表面富集,甲苯次之,环己酮最差．这一现象与溶剂的挥发速度无关．聚合物在溶液中的聚集结构、气／液界面结构是造成成膜方式对聚合物表面结构与性能产生巨大影响的主要原因．当聚合物在溶液中形成以PFMA为核、PMMA为冠的胶束结构时,在溶液固化过程中氟化组分向表面富集需要较长的时间,这时由于成膜方法直接影响溶液的固化速度,造成其对氟化组分向表面富集的程度影响很大．当聚合物在溶液中以单分子或松散聚集体存在,在溶液固化过程中氟化组分向表面富集的速度很快,这时成膜方法对氟化组分向表面富集的程度影响很小．以上结果无论对理论研究还是应用研究都具有重要意义．