纳米金-Nafion修饰金电极电化学阻抗法测定人端粒DNA

报道了基于纳米金-Nafion修饰金电极检测人端粒DNA的电化学阻抗传感器。将纳米金与Nafion混合超声得到纳米金-Nafion纳米材料,将此纳米材料滴涂于金电极表面获得纳米金-Nafion修饰电极。再将探针人端粒ss DNA滴涂在修饰电极上制备电化学阻抗传感器。利用扫描显微镜对纳米材料的形貌进行了表征。利用循环伏安法和电化学阻抗法对传感器进行了表征及目标人端粒DNA的定量测定。在最优化实验条件下,电化学阻抗传感器响应信号(ΔRet)与目标人端粒DNA浓度的对数(lgc)在0.001~1.0 nmol/L范围内呈良好线性关系。检出限为3.0 pmol/L。对0.5 nmol/L的目标人端粒DNA 7次平行测定,相对标准偏差RSD为3.5%。     

基于HDT自组装金纳米粒子修饰电极的微囊藻毒素-LR电化学免疫传感器研究

构建了一种新型的基于金纳米粒子(Au NPs)修饰金电极的微囊藻毒素-亮氨酸-精氨酸(MCLR)电化学免疫传感器。采用柠檬酸钠还原法制备了Au NPs溶胶,分别用透射电子显微镜和紫外-可见吸收光谱对其进行表征。将Au NPs组装到1,6-己二硫醇(HDT)自组装单分子层修饰的金电极表面,再将MCLR抗体(anti-MCLR)固定于该修饰电极上,利用扫描探针显微镜法、循环伏安法和电化学交流阻抗法(EIS)表征了自制化学修饰电极表面的形貌特征和电化学免疫传感器的电化学特征。通过辣根过氧化物酶标记的MCLR(MCLR-HRP)与MCLR竞争结合抗体,建立了检测MCLR的差分脉冲伏安法(DPV)。在最佳实验条件下,用DPV对MCLR检测的线性范围为0.01~25μg/L,检出限为0.005μg/L。对构建的免疫传感器的重现性、稳定性和选择性进行了考察。该方法对实际水样中MCLR的加标回收率为100%~102%,测定结果与高效液相色谱法的测定结果一致。     

壳聚糖-纳米金复合膜修饰电化学发光免疫传感器检测人免疫球蛋白G

利用壳聚糖与纳米金良好的生物相容性及蛋白固定能力,制备了兼具导电性和透光性的人免疫球蛋白G(IgG)修饰膜,用于修饰玻碳电极,研制了新型电化学发光免疫传感器,并通过扫描电镜(SEM)及交流阻抗技术(EIS)考查了传感器表面性质.基于竞争免疫分析模式,以Ru(bpy)32+标记的羊抗人IgG为发光示踪物,采用新型共反应剂二丁基乙醇胺(DBAE)对光信号进行放大,建立了人IgG的检测方法,线性范围20ngmL-1～1.0μgmL-1,检测限6.5ngmL-1.将该电化学发光传感器应用于人血中IgG的检测,结果令人满意.     

金纳米簇信号放大的电化学免疫传感器

通过抗原抗体的特异性识别作用以及金纳米簇(AuNCs)探针和金标银染的双重信号放大作用,构建了一种新的电化学免疫传感器,对人的免疫球蛋白(IgG)进行了检测。受贻贝分泌的黏附蛋白启示,首先将聚多巴胺薄膜修饰在铟锡氧化物电极(ITO)上,并对一抗抗体进行固定,通过观察电化学阻抗的变化来监控免疫传感器的构建过程。将待检测的IgG抗原组装在该电极上并与AuNCs标记的二抗反应,最后经银染反应,用溶出伏安法对IgG的含量进行定量检测,其灵敏度达到0.5 ng/L。该方法可应用于实际血清样品中IgG含量的测定。     

基于金纳米粒子/聚阿魏酸/多壁碳纳米管修饰电极的DNA计时库仑法生物传感器的制备

构建了基于金纳米粒子/聚阿魏酸/多壁碳纳米管(AuNPs/PFA/MWCNTs)修饰电极的DNA计时库仑法生物传感器.利用循环伏安技术在多壁碳管修饰的玻碳电极表面上聚合一层阿魏酸,在恒电位条件下,在阿魏酸表面沉积金纳米粒子,巯基DNA作为探针通过金硫键固定在金纳米粒子表面.电化学交流阻抗技术(EIS)与扫描电镜(SEM...     

基于纳米金/硫堇层层自组装的新型电流型酶-癌胚抗原免疫传感器

将Nafion 膜固定在金电极(Au)表面, 通过静电吸附和共价键合作用将硫堇(Thi)和纳米金颗粒(nano-Au)层层自组装到Nafion膜修饰的金电极表面. 再通过形成的纳米金单层吸附癌胚抗体(anti-CEA), 最后用辣根过氧化物酶(HRP)代替牛血清白蛋白(BSA)封闭电极上的非特异性吸附位点, 并同时起到放大响应电流信号的作用, 从而制得高灵敏、高稳定电流型酶-癌胚抗原(CEA)免疫传感器. 通过循环伏安和交流阻抗考察了电极表面的电化学特性, 并对该免疫传感器的性能进行了详细的研究. 该传感器对CEA检测的线性范围为2.5~80.0 ng/mL, 检测限为0.90 ng/mL.     

石墨烯/纳米金复合材料的无酶葡萄糖生物传感器制备

以抗坏血酸(AA)为还原剂,通过同步还原法制得石墨烯/纳米金复合材料.采用电化学方法,构建了一种基于石墨烯/纳米金复合材料修饰电极的无酶葡萄糖生物传感器.实验中,通过伏安法考察了不同修饰电极在葡萄糖溶液中的电化学行为.同时,探讨了溶液中OH-离子强度、溶解氧、扫描初始电位及石墨烯与纳米金的比例对传感器响应特性的影响.在...     

聚脱氧腺苷酸/还原石墨烯纳米复合膜电化学传感器检测核黄素

以含32个碱基的聚脱氧腺苷酸(A32)作为黏合剂,将水合肼还原的石墨烯(RGO)固定在金(Au)电极表面,制备A32/RGO纳米复合膜电化学传感器.利用循环伏安法和交流阻抗法对传感器制备过程进行表征,并用循环伏安法和微分脉冲伏安法研究了该传感器的电化学行为.研究结果表明,与裸Au电极和A32修饰的Au电极相比,RGO/A32/Au电极对核黄素有较高的电化学活性,其还原峰电流与核黄素的浓度在0.025~2.75μmol/L范围内呈线性关系,检出限(S/N=3)为15 nmol/L.该传感器具有灵敏度高、抗干扰能力强及稳定性好等优点,可用于人尿中核黄素的分析测定.     

基于DNA电化学发光传感器研究金纳米颗粒对量子点的电化学发光影响

纳米金颗粒具有高的消光系数和良好的表面等离子体共振特性, 其等离子体共振特性受纳米金颗粒的尺寸和周围环境等因素的影响. 本文基于半导体纳米晶电化学发光信号对金纳米颗粒的距离依赖性制备了DNA电化学发光传感器. 首先利用循环伏安法(CV)在玻碳电极(GCE)表面原位沉积金纳米颗粒(AuNPs), 巯基丙酸包裹的CdS量子点(QDs)与氨基修饰的双链DNA (dsDNA)通过酰胺键缩合, 形成量子点修饰的双链DNA(QDs-dsDNA). 最后将QDs-dsDNA 通过dsDNA 另一端的巯基组装到纳米金表面, 得到CdS QDs-DNA/AuNPs/GCE电化学发光传感器. 在优化电极表面QDs-dsDNA密度、金纳米颗粒沉积方法等实验条件的基础上, 对不同传感器的表面性质进行了表征, 如形貌和电化学阻抗等. 进一步通过控制纳米金和CdS QDs之间的DNA研究了纳米金对CdS QDs发光信号的影响作用. 结果显示DNA链的长度和类型对发光信号有着重要的影响. 最后将此传感器用于环境污染物的DNA损伤检测, 显示出很好的灵敏响应.     

空壳纳米金修饰的新型DNA传感器

利用新型材料金纳米空球, 通过层层修饰的技术, 分别将壳聚糖、空壳纳米金、L-半胱氨酸、细胞色素c以及ssDNA探针修饰到玻碳电极表面, 制备了一种新型的DNA生物传感器. 以紫外及透射电子显微镜(TEM)表征了空壳纳米金, 以循环伏安法、阻抗谱图等电化学方法研究了传感器的特性, 通过原子力显微镜方法观察了该DNA生物传感器不同层之间的形态差异. 结果表明, 该修饰电极所吸附的ssDNA探针为1.672×10^―10 mol•cm^－2. 在指示剂柔红霉素的帮助下, DNA探针可与互补的DNA进行杂交, 借此以微分脉冲伏安法测定DNA.     

Electrochemical Immunosensor for Lactate Dehydrogenase Detection Through Analyte-driven Catalytic Reaction on Multi-walled Carbon Nanotubes and Gold Nanoparticle Modified Carbon Electrode

A novel electrochemical immunosensor for lactate dehydrogenase (LDH) detection was proposed based on analyte-driven catalytic reaction by attaching LDH antibodies on multi-walled carbon nanotubes (MWCNTs) and gold nanoparticles (AuNPs) modified glassy carbon electrodes (GCE). As LDH was captured by the antibodies on electrode surface, it catalyzed the formation of pyruvate and the reduced form of nicotinamide adenine dinucleotide (NADH), thus a sensitive electrochemical signal obtained from the above redox reaction was recorded by differential pulse voltammetry (DPV). Under optimum conditions, the developed immunosensor exhibits high sensitivity for LDH quantification ranging from 0.001 μg/mL to 0.5 μg/mL with a low detection limit at 0.39 ng/mL. This developed immunosensor reveals ideal accuracy and feasibility for LDH detection in Streptococcus uberis (S. uberis) induced bovine mammary epithelial cells (MECs) samples by comparison with conventional commercial kit, which shows remarkably application potential in diseases diagnosis.     

基于纳米银与有机多孔材料/纳米金修饰的甲胎蛋白免疫传感器研究

在金电极表面电沉积银为氧化还原探针,利用有机多孔材料(PTC-NH2)、纳米金(nano-Au)固载甲胎蛋白抗体(anti-AFP),制备出用于检测甲胎蛋白(AFP)的安培型免疫传感器。通过交流阻抗技术、循环伏安法研究了电极的电化学特性,考察了孵育时间、测试液pH值等实验条件对传感器性能的影响,并利用扫描电子显微镜(SEM)对电极的修饰过程进行了表征。该传感器对AFP有良好的电流响应,线性范围分别为1.0～20.0ng/mL和20.0～60.0 ng/mL,检测限为0.6 ng/mL。     

基于聚2,6-二氨基吡啶膜及纳米金修饰的癌胚抗原免疫传感器研究

在玻碳电极表面电聚合2,6-二氨基吡啶(pPA), 利用硫堇(Thi)、纳米金(nano-Au)固载癌胚抗体, 制得稳定性好、灵敏度较高、线性范围宽的电流型免疫传感器. 通过循环伏安法考察了该免疫传感器的电化学特性, 在优化的实验条件下, 该免疫传感器的峰电流随着检测溶液中癌胚抗原(CEA)浓度的增大而减小, 并在0.5～20和20～160 ng/mL CEA范围内呈现出良好的线性关系, 检测下限为0.2 ng/mL. 该免疫传感器具有制作简单、重现性好、线性范围宽等优点, 可用于临床上对CEA的检测.     

Study on the immobilization of anti-IgG on Au-colloid modified gold electrode via potentiometric immunosensor, cyclic voltammetry, and electrochemical impedance techniques

The immobilization of anti-IgG on Au-colloid modified gold electrodes has been investigated. A cleaned gold electrode was first immersed in a mercaptoethylamine (AET) solution, and then gold nanoparticles were chemisorbed onto the thiol groups of the mercaptoethylamine. Finally, anti-IgG was adsorbed onto the surface of the gold nanoparticles. Potentiometric immunosensor, cyclic voltammetry, and electrochemical impedance techniques were used to investigate the immobilization of anti-IgG on Au colloids. In the impedance spectroscopic study, an obvious difference of the electron transfer resistance between the Au-colloid modified electrode and the bare gold electrode was observed. The cyclic voltammogram tends to be more irreversible with increased anti-IgG concentration. Using the potentiometric immunosensor, the proposed technique is based on that the specific agglutination of antibody-coated gold nanoparticles, averaging 16 nm in diameter, in the presence of the corresponding antigen causes a potential change that is monitored by a potentiometry. It is found that the developed immunoagglutination assay system is sensitive to the concentration of IgG antigen as low as 12 ng mL(-1). Experimental results showed that the developed technique is in satisfactory agreement with the ELISA method, and that gold nanoparticles can be used as a biocompatible matrix for antibody or antigen immobilization.     

基于纳米金固定半抗原的电化学免疫传感器灵敏检测克伦特罗

研制了一种基于纳米金固定半抗原的间接竞争电化学免疫传感器,可灵敏检测克伦特罗.在金电极表面组装1,6-己二硫醇单分子膜,通过Au-S共价作用连接纳米金颗粒,通过吸附作用固定克伦特罗牛血清白蛋白偶联物.样品中的待测组分与固定化的克伦特罗偶联物竞争结合单克隆抗体,碱性磷酸酯酶标记的二抗选择性地与电极表面捕获的一抗反应,进而催化底物1-萘酚磷酸酯水解生成1-萘酚,在电极表面氧化产生电信号.在优化的实验条件下,克伦特罗浓度在0.1～1000 μg/L范围内与电流强度线性相关,线性方程为I(A)-8.79× 10-7-2.66× 10-7logC (μg/L),相关系数0.9960,检出限达20 ng/L.同时测定了猪肉及猪肝样品中克伦特罗含量,相对标准偏差平均值为7.0％,加标回收率在89.1％～105.6％之间,与传统的间接竞争酶联免疫吸附法对照,结果无显著性差异.     

An electrochemical immunosensor based on agarose hydrogel films for rapid determination of ractopamine

A novel label-free electrochemical immunosensor for rapid determination of ractopamine was constructed by incorporating ractopamine–bovine thyroglobulin antigen in agarose hydrogel films modified on a glassy carbon electrode. Cyclic voltammetry and differential pulse voltammetry were employed to investigate the electrochemical character of the immunosensor during different modified stages using a redox probe system of K₃Fe(CN)₆/K₄Fe(CN)₆. In the presence of polyclonal antibody against ractopamine, K₃[Fe(CN)₆] electron transfer is inhibited, presumably due to that antibody in solution could adsorb on the electrode surface modified antigen. A competitive immunoreaction system was applied to determinate the free ractopamine in phosphate buffer solution. The selected polyclonal antibody showed very high sensitivity and specificity for ractopamine, and was used for the detection and quantitative determination of trace amounts of ractopamine in spiked animal feeds.     

Potentiometric Immunosensor Based on Immobilization of Hepatitis B Surface Antibody on Platinum Electrode Modified Silver Colloids and Polyvinyl Butyral as Matrixes

A highly sensitive immunosensor based on immobilization of hepatitis B surface antibody (HBsAb) on platinum electrode (Pt) modified silver colloids and polyvinyl butyral (PVB) as matrixes has been developed for potentiometric immunoanalysis to detect hepatitis B surface antigen (HBsAg) in this study. HBsAb molecules were immobilized successfully on nanometer‐sized silver colloid particles associated with polyvinyl butyral on a platinum electrode surface. The modification procedure was electrochemically monitored by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The HBsAb‐silver‐PVB‐modified electrode exhibited direct electrochemical behavior toward HBsAg. The factors influencing the performance of the resulting immunosensor were studied in detail. More than 94.7% of the results of human serum samples obtained by this method were in agreement with those obtained by enzyme‐linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited a sigmoid curve with log HBsAg concentration, high sensitivity (39.8 mV/decade), wide linear range from 16.0 to 800 ng mL^?1 with a detection limit of 3.6 ng mL^?1, fast potentiometric response (<3 min) and long‐term stability (>4 months). The response mechanism of the immunosensors was also studied with AC impedance techniques.     

Ultrasensitive electrochemical immunosensor of carcinoembryonic antigen based on gold-label silver-stain signal amplification

A novel gold-label silver-stain electrochemical immunosensor based on polythionine-gold nanoparticles (PTh-Au NPs) modified glassy carbon electrode (GCE) as a platform and secondary antibody labeled Au NPs (Ab₂-Au NPs) as immumoprobe for carcinoembryonic antigen (CEA) detection. The sandwich-type biosensor adopted anodic stripping voltammetry to detect silver stripping signal when the Ab₂-Au NPs of the formed immunocomplexes were stained with silver.     

Amperometric Immunosensor Based on L-Cysteine/Gold Colloidal Nanoparticles for Carbofuran Detection

In this study, anti-carbofuran monoclonal antibodies (Ab) were immobilized onto a gold electrode surface modified with multilayers of L-cysteine and gold colloidal nanoparticles (GNPs). Furthermore, horseradish peroxidase (HRP) as enzyme membrane was used for blocking unspecific sites and amplifying signal. The conformational properties of the immunosensor were characterized using electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The concentration of antibody solution, pH of working buffer and incubation time were studied in detail for optimization of analytical performance. Under optimal conditions, the variation of current response was proportional to the concentration of carbofuran which ranged from 0.01 ng/mL to 50 ng/mL with a correlation coefficient of 0.9912. The detection limit was 0.01 ng/mL (S/N = 3). The proposed immunosensor exhibited good reproducibility and stability and it can be used for the rapid detection of carbofuran pesticide.     

Ultrasensitive potentiometric immunosensor based on SA and OCA techniques for immobilization of HBsAb with colloidal Au and polyvinyl butyral as matrixes

A novel potentiometric immunosensor for detection of hepatitis B surface antigen (HBsAg) has been developed by means of self-assembly (SA) and opposite-charged adsorption (OCA) techniques to immobilize hepatitis B surface antibody (HBsAb) on a platinum electrode. A cleaned platinum electrode was first pretreated in the presence of 10% HNO3 and 2.5% K2CrO4 solution and held at -1.5 V (vs SCE) for 1 min to make it negatively charged and then immersed in a mixing solution containing hepatitis B surface antibody, colloidal gold (Au), and polyvinyl butyral (PVB). Finally, HBsAb was successfully immobilized onto the surface of the negatively charged platinum electrode modified nanosized gold and PVB sol-gel matrixes. The modified procedure was characterized by electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The immobilized hepatitis B surface antibody exhibited direct electrochemical behavior toward hepatitis B surface antigen (HBsAg). The performance and factors influencing the performance of the resulting immunosensor were studied in detail. More than 95.7% of the results of the human serum samples obtained by this method were in agreement with those obtained by enzyme-linked immunosorbent assays (ELISAs). The resulting immunosensor exhibited fast potentiometric response (<3 min) to HBsAg. The detection limit of the immunosensor was 2.3 ng.mL(-1), and the linear range was from 8 to 1280 ng.mL(-1). Moreover, the studied immunosensor exhibited high sensitivity, good reproducibility, and long-term stability (>6 months).