金纳米粒子-过氧化聚吡咯-碳纳米管复合膜修饰电极同时测定对苯二酚和邻苯二酚

将多壁碳纳米管(MWCNTs)滴涂于复合陶瓷碳电极(CCE)表面,采用电化学方法在碳纳米管表面逐层沉积过氧化聚吡咯(OPPy)和金纳米粒子(AuNPs),制得金纳米粒子-过氧化聚吡咯-多壁碳纳米管复合膜修饰电极(AuNPs-OPPy-MWCNTs/CCE).采用扫描电镜和电化学方法对修饰电极进行了表征.在0.10 mol/LPBS (pH 7.0)缓冲溶液中研究了对苯二酚(HQ)和邻苯二酚(CC)在修饰电极上的电化学行为.结果表明,修饰电极对HQ和CC的电极过程具有良好的电化学响应和区分效应.基于此建立了一阶导数伏安法同时测定HQ和CC的方法,HQ和CC的线性范围均为2.0×10-7～ 1.0×10-4 mol/L,检出限分别为6.0×10-8 mol/L和8.0×10-8 mol/L(S/N=3).模拟水样中的加标回收率分别为96.2％～99.8％ (HQ)和96.0％～100.0％,表明本方法具有良好的实用性.     

基于蛋白A/纳米金/壳聚糖分散的多壁碳纳米管修饰的电位型甲胎蛋白免疫传感器的研究

将壳聚糖分散的多壁碳纳米管(MWNT-CS)滴涂于金电极(Au)表面,利用壳聚糖大量的氨基将纳米金(nano-Au)固定到金电极表面,再利用蛋白A(PA)的定向固定效应将甲胎蛋白抗体(anti-AFP)固定到纳米金修饰的金电极表面,从而制得高灵敏、高稳定电位型甲胎蛋白免疫传感器。蛋白A为抗原和抗体的反应提供了合理的基础,纳米金的存在提高了抗体在电极表面的固定量,多壁碳纳米管(MWNT)促进了电子的传递,从而缩短电极的响应时间。在优化的实验条件下,该传感器响应的电极电位与甲胎蛋白浓度的对数在7.0~190.0μg/L的范围内保持良好的线性关系,检出限(S/N=3)为3.9μg/L。     

基于金纳米粒子的QCM实时检测DNA错配的研究

利用石英晶体微天平（QCM）技术,用双硫醇分子作为连接剂,将金纳米粒子固定于金电极表面,以人类p53基因片断为DNA探针,研究了其在QCM金电极表面的固定、杂交和错配,重点探讨了金纳米粒子修饰的DNA错配碱基个数和错配位点对杂交的影响。在实验条件下,金纳米粒子在QCM金电极表面的修饰使其灵敏度得到了明显提高;而且,错配碱基个数和错配碱基位点的差异都对杂交产生了不同程度的影响。     

纳米金/碳纳米管复合材料修饰电极催化鲁米诺电致发光体系的研究

制备了纳米金/多壁碳纳米管(MWNT)复合材料修饰电极,并将此电极应用于鲁米诺电化学发光体系.电化学发光实验表明,此复合材料修饰电极同时具备了纳米金和碳纳米管的催化性能.此外通过电极活性表面积测算、电化学交流阻抗实验等方法研究了纳米金和碳纳米管在此体系催化过程中的作用.纳米金/碳纳米管修饰电极具有良好的重现性,可以广泛应用于鲁米诺电化学发光测定体系.     

芦丁在铂纳米/碳纳米管修饰电极上电化学行为研究

通过电沉积的方式在多壁碳纳米管(MWCNTs)修饰玻碳电极表面上沉积铂(pt)纳米粒子,并运用循环伏安法(CV)、示差脉冲伏安法(DPV)探讨了芦丁在铂纳米/碳纳米管/玻碳电极上的电化学行为.实验结果表明,芦丁在该修饰电极上呈现一对良好氧化还原峰,其氧化峰电流与浓度在3.2×10(-8)～1.2×10(-5)mol/L...     

基于聚对苯二甲酸乙二醇酯薄膜的石墨烯/金纳米粒子/葡萄糖氧化酶柔性电极的制备及检测葡萄糖

采用化学气相沉积法生长多晶石墨烯(Graphene, G),转移至聚对苯二甲酸乙二醇酯(PET)薄膜表面,通过控制金溶胶蒸发速率,在多晶石墨烯表面组装均匀分布的亚单层金纳米粒子(AuNPs);然后修饰巯基乙酸,通过共价交联反应将葡萄糖氧化酶固定于AuNPs表面,构建基于PET膜的石墨烯/金纳米粒子/葡萄糖氧化酶(G/AuNPs/GOD)柔性电极.此电极在工作电位0.6 V(vs.SCE电极)、pH 7.0磷酸盐缓冲溶液、室温25℃条件下,差分脉冲伏安法响应电流与被测葡萄糖浓度在0.05~10.55 mmol/L范围内呈线性关系,线性方程为I(108A)=0.2629 C(mmol/L)+1.4149,线性相关系数 r=0.9955,检出限1 μmol/L (3σ). G/AuNPs/GOD柔性电极的制备可为特定环境和可穿戴设备的葡萄糖检测提供了新的途径和方法,拓展了葡萄糖检测的应用范围.     

碳纳米管负载纳米金-石墨烯量子点修饰电极电化学检测过氧化氢

采用过氧化氢刻蚀法制备石墨烯量子点(GQDs),再采用原位化学还原法制备金纳米粒子-石墨烯量子点纳米复合物(Au NPs-GQDs),最后以聚二甲基二烯丙基氯化铵(PDDA)为交联剂将上述纳米复合物组装于多壁碳纳米管表面,制得金纳米粒子-石墨烯量子点-PDDA-多壁碳纳米管复合材料(Au NPs-GQDsPDDA-MWCNTs)。通过荧光光谱法、紫外-可见吸收光谱法和透射电子显微镜对上述复合材料进行表征。采用滴涂法制得该复合材料修饰的玻碳电极,研究了过氧化氢在该电极上的电化学行为。结果表明:在石墨烯量子点、金纳米粒子和多壁碳纳米管三者的协同作用下,该电极对过氧化氢的电氧化表现出强的催化活性。在优化条件下,安培法检测H_2O_2的线性范围为2.0×10~(-8)~1.5×10~(-3)mol/L,检出限(3sb)为8.0×10~(-9)mol/L,灵敏度为61.6μA/(mmol·L~(-1))。     

基于碳纳米管/L-半胱氨酸/Fe3O4@Au纳米复合材料的电流型甲胎蛋白免疫传感器的研究

将DMF(N,N-二甲基甲酰胺)分散的多壁碳纳米管(MWNT)修饰在金电极表面,再将修饰电极依次沉积纳米金和L-半胱氨酸(L-Cys),并通过半胱氨酸中的巯基吸附Fe3O4@Au纳米复合材料,再固载甲胎蛋白抗体(anti-AFP),以牛血清白蛋白(BSA)封闭非特异性吸附位点,构建了高灵敏、稳定的新型电流型甲胎蛋白免疫传感器。实验通过扫描透射电子显微镜(TEM)对DMF-MWNT和Fe3O4@Au复合纳米粒子进行了表征。在优化的实验条件下,此免疫传感器对甲胎蛋白抗原的检测范围为0.1～150μg/L,检出限为0.03μg/L。     

吲哚乙酸在纳米金/碳纳米管/壳聚糖修饰玻碳电极上的电化学行为及其检测

以壳聚糖(CS)为多壁碳纳米管(MWNTs)的分散介质, 通过MWNTs/CS膜上大量氨基静电吸附纳米金粒子(nanoAu), 使玻碳电极(GCE)表面形成稳定的nanoAu-MWNTs-CS-GCE修饰层, 并采用电化学方法初步研究了该修饰电极的性能. 探讨了吲哚乙酸(IAA)在该修饰电极上的电化学行为, 结果表明, 在5～200 μmol/L浓度范围内以及0.78 V电位条件下, 以循环伏安法(CV)测得的氧化峰电流变化值与c(IAA)呈良好的线性关系, 其回归方程为y=2.34×10^-4+0.14x, 检出限为8.33×10^-6 mol/L, 相关系数为0.9997.     

基于树枝状分子及功能化金纳米粒子的电化学免疫传感器检测污泥中大肠杆菌

利用树枝状分子-金纳米粒子复合物修饰电极和金纳米粒子标记物构建电化学免疫传感器,用于污泥中大肠杆菌的检测.首先在玻碳电极表面电聚合对氨基苯甲酸,通过共价作用结合第Ⅳ代氨基末端的树枝状分子(G4-PAMAM),并在其内部载入金纳米粒子,制备修饰电极(GCE/p-ABA/PAMAM (AuNPs)),用于固定大肠杆菌.采用硫堇作为电活性物质包被金纳米粒子,用于标记二抗制备金纳米粒子标记物(Ab2-Au-Th).通过抗原-抗体之间的特异性识别作用,将一抗、金纳米粒子标记物依次修饰在电极表面,用差分脉冲伏安法测定硫堇产生的电流信号,实现对大肠杆菌的检测.在优化的实验条件下,响应电流与大肠杆菌浓度的对数在1.0×102～1.0×106 cfu/mL范围内呈线性关系,检出限为70 cfu/mL(S/N=3).利用本方法检测污水处理厂的不同污泥样品中的大肠杆菌,回收率为89.4％～ 105.8％.     

Sensitive determination of hydrazine using poly(phenolphthalein), Au nanoparticles and multiwalled carbon nanotubes modified glassy carbon electrode

This study reports a detailed analysis of an electrode material containing poly(phenolphthalein), carbon nanotubes and gold nanoparticles which shows superior catalytic effect towards to hydrazine oxidation in Britton–Robinson buffer (pH 10.0). Glassy carbon electrode was modified by electropolymerization of phenolphthalein (PP) monomer (poly(PP)/GCE) and the multiwalled carbon nanotubes (MWCNTs) was dropped on the surface. This modified surface was electrodeposited with gold nanoparticles (AuNPs/CNT/poly(PP)/GCE). The fabricated electrode was analysed the determination of hydrazine using cyclic voltammetry, linear sweep voltammetry and amperometry. The peak potential of hydrazine oxidation on bare GCE, poly(PP)/GCE, CNT/GCE, CNT/poly(PP)/GCE, and AuNPs/CNT/poly(PP)/GCE were observed at 596 mV, 342 mV, 320 mV, 313 mV, and 27 mV, respectively. A shift in the overpotential to more negative direction and an enhancement in the peak current indicated that the AuNPs/CNT/poly(PP)/GC electrode presented an efficient electrocatalytic activity toward oxidation of hydrazine. Modified electrodes were characterized with High-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Amperometric current responses in the low hydrazine concentration range of 0.25–13 µM at the AuNPs/CNT/poly(PP)/GCE. The limit of detection (LOD) value was obtained to be 0.083 µM. A modified electrode was applied to naturel samples for hydrazine determination.     

聚(3-氨基-5-巯基-1,2,4-三唑)/多壁碳纳米管修饰的玻碳电极同时检测尿酸、黄嘌呤与次黄嘌呤

采用滴涂法得到多壁碳纳米管(MWCNTs)修饰的玻碳电极(GCE),通过电沉积方法将3-氨基-5-巯基-1,2,4-三唑(TA)沉积在MWCNTs/GCE表面,制备了聚(3-氨基-5-巯基-1,2,4-三唑)/多壁碳纳米管修饰电极(p TA/MWCNTs/GCE)。采用循环伏安法(CV)和示差脉冲伏安法(DPV),研究了尿酸(UA)、黄嘌呤(XA)和次黄嘌呤(HX)在该修饰电极上的电化学行为。结果表明,该修饰电极对UA、XA和HX均有较好的电催化活性作用,能实现对3种物质的同时测定。UA、XA和HX在该修饰电极上的线性范围分别为9.0~739.0、2.0~259.0、1.0~353.0μmol/L;检出限分别为0.67、0.17、0.33μmol/L。该修饰电极已成功用于尿液和血清实际样品中UA、XA和HX的同时测定,回收率为98.8%~105.5%。     

Electrochemical Determination of Phenylethanolamine A Based on Nafion/MWCNTs/AuNPs Modified Carbon Electrode

Phenylethanolamine A (PEA), a β‐agonist, was found to be illegally used as a growth promoter in pigs last year, causing Chinese government's great attention. Here, a sensitive electrochemical method was developed for detecting PEA by immobilization of gold nanoparticles (AuNPs), multiwalled carbon nanotubes (MWCNTs) and Nafion on the surface of a glassy carbon electrode (GCE). The Nafion/MWCNTs/AuNPs film was characterized by scanning electronic micrographs (SEM) and electrochemical impedance spectroscopy (EIS). The electrochemical behaviors of PEA at the modified GCE were investigated in detail. The synergetic effects of AuNPs, MWCNTs and Nafion amplify the electrochemical reduction signal of PEA, and result in high sensitivity for PEA determination. Under the optimal conditions, the electrochemical sensor shows a wide linear range of 0.01 to 10 (mol/L with a detection limit of 0.005 µmol/L. Moreover, the fabricated sensor presents high selectivity and long‐term stability, which paves a new way for simple, rapid, sensitive detection of PEA.     

Poly(pyridine‐3‐boronic acid)/Multiwalled Carbon Nanotubes Modified Glassy Carbon Electrodes for Simultaneous Determination of Ascorbic Acid, 3,4‐Dihydroxyphenylacetic Acid and Uric Acid

Poly(pyridine‐3‐boronic acid) (PPBA)/multiwalled carbon nanotubes (MWCNTs) composite modified glassy carbon electrode (GCE) was used for the simultaneous determination of ascorbic acid (AA), 3,4‐dihydroxyphenylacetic acid (DOPAC) and uric acid (UA). The anodic peaks for AA, DOPAC and UA at the PPBA/MWCNTs/GCE were well resolved in phosphate buffer solution (pH 7.4). The electrooxidation of AA, DOPAC and UA in the mixture solution was investigated. The peak currents increase with their concentrations increasing. The detection limits (S/N=3) of AA, DOPAC and UA are 5 µM, 3 µM and 0.6 µM, respectively.     

碳纳米管负载铂修饰玻碳电极用于电化学发光的研究及其对富马酸酮替芬的测定

在玻碳电极上制备了碳纳米管负载纳米铂修饰电极(Pt-MWCNTs/GCE)。考察了联吡啶钌和富马酸酮替芬在3个不同电极上的电化学及其发光行为,并对其进行了对比。结果表明,在Pt-MWCNTs/GCE上富马酸酮替芬对联吡啶钌的电化学发光强度有明显的增敏作用,其增敏效果约为MWCNTs/GCE电极的2倍,约为裸玻碳电极的3.5倍,据此,建立了一种Pt-MWCNTs/GCE电极上电化学发光法检测富马酸酮替芬的新方法。在优化实验条件下,富马酸酮替芬的浓度在1.0×10-7～1.0×10-4mol/L范围内与其相对发光强度呈线性关系,线性回归方程为I=48.805×106c+221.03(r=0.9969),检出限为2.4×10-9mol/L,连续平行测定1.0×10-5mol/L的富马酸酮替芬溶液5次,发光强度的RSD为3.3%。对样品进行回收率实验,回收率为99%～104%,RSD为2.1%。     

基于Sol-gel膜和多壁碳纳米管/铂纳米颗粒增效的电流型L-乳酸生物传感器

构建了基于多壁碳纳米管(Multi-walled carbon nanotubes,MWCNTs)和铂纳米颗粒(Pt-nano)的电流型L-乳酸生物传感器。将Sol-gel膜覆盖在L-乳酸氧化酶(L-lactate oxidase,LOD)和MWCNTs/Pt-nano修饰的电极表面。实验结果表明:传感器的最佳工作条件为:检测电压0.5V;缓冲液pH6.4;检测温度25℃。此传感器的响应时间为5s,灵敏度是6.36μA/(mmol/L)。连续检测4星期其活性仍保持90%,线性范围为0.2～2.0mmol/L,且抗干扰能力强。在实际血样的检测中,此传感器与传统的分光光度法具有很好的一致性。     

Voltammetric Determination of Neotame by Using Chitosan/Nickelnanoparticles/Multi Walled Carbon Nanotubes Biocomposite as a Modifier

A selective and simple biosensor was prepared by immobilizing chitosan/nickelnanoparticles/multi-walled carbon nanotubes biocomposite on the glassy carbon electrode surface for voltammetric quantification of neotame. The properties and morphology of the modified electrode surfaces were characterized by scanning electron microscope (SEM), energy dispersive X-ray analysis (EDX). Electro oxidation of neotame on this modified surface was examined through cyclic voltammetry (CV) and square wave voltammetry (SWV) techniques. The biocomposite modified surface (Chi/NiNPs/MWCNTs/GCE) proposed in this study showed good electrocatalytic activity for neotame with an improved voltammetric peak current at 1.004 V, unlike the bare glassy carbon electrode (GCE) surface and several other modified surfaces. Under optimum conditions, Chi/NiNPs/MWCNTs/GCE gave linear SWV responses at the range of 2 μM ∼50 μM for neotame with 0.84 μM determination limit. This voltammetric sensor was successfully employed for the quantification of neotame on food samples and showed long-term stability, advanced voltammetric behavior, and good repeatability. Selective, accurate, and precise determination of neotame highlight the importance of this electrode in monitoring the control of food additives and ensures attract a great deal of attention.     

多巴胺在聚亚甲基蓝/石墨烯修饰电极上的电化学行为研究

利用电聚合方法在石墨烯修饰的玻碳电极表面制备了聚亚甲基蓝/石墨烯修饰电极(PMB/GH/GCE)。采用循环伏安法(CV)和差分脉冲伏安法(DPV)研究了多巴胺(DA)和抗坏血酸(AA)在该修饰电极上的电化学行为。在pH 6.9的磷酸盐缓冲溶液中,DA和AA分别在0.208 V和-0.108 V处产生灵敏的氧化峰,与其在聚亚甲基蓝和石墨烯单层修饰电极上的电化学行为相比,两者的峰电流明显增加,峰电位差达316 mV。研究表明,电聚合方法使亚甲基蓝牢固地非共价修饰到石墨烯上,并产生协同增效作用,较好地提高了电极的灵敏度和分子识别性能,有利于在大量AA存在下实现对DA的选择性测定。在1.00×10-3mol/L AA的存在下,DA的差分脉冲伏安法峰电流与其浓度在1.00×10-7～5.00×10-3mol/L范围内呈良好的线性关系,检出限达1.00×10-8mol/L。将该方法用于盐酸多巴胺注射液的测定,结果满意。     

Sensitive Nucleic Acid Detection at NH2‐MWCNTs Modified Glassy Carbon Electrode and its Application for Monitoring of Gemcitabine‐DNA Interaction

An electrochemical dsDNA nanobiosensor was fabricated using amino‐functionalized multi walled carbon nanotubes modified glassy carbon electrode (NH₂fMWCNTs/GCE) for the sensitive detection of DNA bases and electrochemical monitoring of drug‐DNA interaction. The influence of functional groups on MWCNT was studied by MWCNT functionalized with NH₂ (NH₂fMWCNTs) and COOH (COOHfMWCNT) groups based on the signal of DNA bases. The modified electrodes were characterized by scanning electron microscopy. One layer of calf thymus double stranded deoxyribonucleic acid (ct‐dsDNA) was immobilized onto the NH₂fMWCNTs/GCE (dsDNA/NH₂fMWCNTs/GCE). The dsDNA/NH₂fMWCNTs/GCE were used to investigate the interaction between the dsDNA and the anticancer drug gemcitabine by differential pulse voltammetry in acetate buffer of pH 4.70. For the confirmation of interaction, the lowering in intensity of the current signals of guanine and adenine was considered as an indicator. Electrochemical impedance spectroscopy studies were performed for the comparison of the modified surfaces. In order to define and visualize the interaction mechanism between gemcitabine and dsDNA/NH₂fMWCNTs/GCE at the molecular level, in silico methods including docking and molecular dynamics simulations were employed.