聚氨酯互穿聚合物网络阻尼性能研究进展

介绍了聚氨酯互穿聚合物网络（ＰＵ ＩＰＮ）作为阻尼材料的研究进展,分别讨论了聚氨酯（ＰＵ）／环氧树脂（ＥＰ）ＩＰＮ和ＰＵ／乙烯基聚合物ＩＰＮ的阻尼性,以及影响阻尼性能的因素,并比较了不同类型的ＰＵ ＩＰＮ的优缺点及新的可能的探讨方向。     

反应注射成型聚氨酯互穿聚合物网络的进展

本文将介绍有关反应注射成型聚氨酯同步互穿聚合物网络（ＲＩＭ ＳＩＮ）方面的研究工作。综合文献报道和我们研究扬实验工作，重点描述了不饱和聚酯树脂或乙烯基酯树脂为刚性相的聚氨酯互穿聚合物网络，讨论了它们的生成反应动力学及其形态结构发展进程，并与样品力学性能相关联。     

反应注射成型聚氨酯互穿聚合物网络研究——刚性网络对于体系形态及性能的影响

用微型反应注射成型机制备了以聚氨酯(PU)为弹性相的两类同步互穿聚合物网络(SIN),其刚性相分别采用保留仲羟基的乙烯基酯树脂(VERH)以及封闭仲羟基的乙烯基酯树脂(VERA)。用傅里叶变换红外光谱在线跟踪了这类互穿网络的生成过程,发现刚性网络抑制了PU网络中硬段有序结构的形成,两个网络间有一定程度的互穿,而两个网络间的化学键作用进一步削弱氢键强度。自旋—自旋弛豫时间的测定进一步表明网络间存在一定的互穿以及刚性相对于PU硬段结晶的抑制作用。材料的力学性能与其SIN的形态有关。VERA网络对PU表现出明显的增强作用,而由VERH网络形成的SIN则由于体系相分离进程受到严重阻碍而使材料性能恶化。     

反应注射成型聚氨酯互穿聚合物网络研究：刚性网络对于体系形…

用微型反应注射成型机制备了以聚氨酯（ＰＵ）为弹性相的两类同步互穿聚合物网络（ＳＩＮ），其刚性相分别采用保留仲羟基的乙烯基酯树脂（ＶＥＲＨ）以及封闭仲羟基的乙烯基酯树脂（ＶＥＲＡ）。用傅里叶变换红外光谱在线跟踪了这类互穿网络的生成过程，发现刚性网络抑制了ＰＵＣ网络中硬段有序结构的形成，两个网络间有一定程度的互穿，而两个网络间的化学键作用进一步削弱氢键强度。自旋－自旋驰豫时间的测定进一步表明网络间存在     

聚丙烯酸酯/聚苯乙烯乳胶互穿聚合物网络阻尼性能的研究

聚丙烯酸酯／聚苯乙烯乳胶互穿聚合物网络阻尼性能的研究刘瑞瑛王静媛韩庆国李玉玮汤心颐（吉林大学化学系长春１３００２３）关键词互穿聚合物网络，聚丙烯酸酯，聚苯乙烯，阻尼性能，乳胶自１９６９年Ｓｐｅｒｌｉｎｇ和Ｆｒｉｓｃｈ分别发展了ＭｉｌａｒＩＰＮ的...     

交联密度对聚硅氧烷/聚丙烯酸酯同步互穿聚合物网络阻尼材料性能的影响

阻尼性能;交联密度对聚硅氧烷/聚丙烯酸酯同步互穿聚合物网络阻尼材料性能的影响     

粘弹性阻尼材料中互穿聚合物网络技术的应用

阐述了粘弹性材料在振动波作用下的阻尼机理,指出声波法和模量法的统一性。综述了互穿聚合物网络技术要点,并解释相分离体系宽玻璃化转变区间的形成机理;介绍了互穿聚合和网络技术形成的新途径及梯度互穿聚合物网络技术要点。     

P(VA-co-DBM)/PVA乳胶IPN阻尼材料的合成及动态力学性能

用种子乳液聚合法合成了聚（醋酸乙烯酯－co-马来酸二丁酯）／聚醋酸乙烯酯乳胶互穿聚合物网络阻尼材料,动态力学谱结果表明,该阻尼材料在较宽的温域具有很高的阻尼因子。     

聚氨酯/环氧树脂互穿网络聚合物的性能研究

互穿聚合物网络（Interpenetrating polymer net-work,简称IPN）广泛应用的为聚氨酯基的互穿网络聚合物。其合成多集中在弹性体方面。本文用同步法合成的聚氨酯／环氧树脂互穿网络硬质泡沫塑料材料（简称PU／ERIPNF）,机械性能较好,并研究了其动态力学性能及形态变化。     

高分子阻尼涂料的研究进展

介绍了高分子阻尼涂料的阻尼机理和组成,以及阻尼涂料的高分子改性方法,包括共聚、共混和互穿网络(IPN)等以及国内外发展现状。重点介绍了目前通用的树脂基料和填料,详细介绍了互穿网络改性方法和乳液聚合物互穿网络,以及环境友好水性阻尼涂料的研究现状和发展。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.