反应注射成型聚氨酯互穿聚合物网络研究：刚性网络对于体系形…

用微型反应注射成型机制备了以聚氨酯（ＰＵ）为弹性相的两类同步互穿聚合物网络（ＳＩＮ），其刚性相分别采用保留仲羟基的乙烯基酯树脂（ＶＥＲＨ）以及封闭仲羟基的乙烯基酯树脂（ＶＥＲＡ）。用傅里叶变换红外光谱在线跟踪了这类互穿网络的生成过程，发现刚性网络抑制了ＰＵＣ网络中硬段有序结构的形成，两个网络间有一定程度的互穿，而两个网络间的化学键作用进一步削弱氢键强度。自旋－自旋驰豫时间的测定进一步表明网络间存在     

聚氨酯与接枝乙烯基酯树脂互穿网络研究: 自由基共聚 单体的影响

通过分子设计技术合成了两种侧链种类和长度可能控制的接枝乙烯基酯树脂(VER),并用它们与聚氨酯(PU)形成了同步互穿网络(SIN)。通过DSC,SEM,TEM,FTIR等考察了接枝VER的共聚单体对VERSIN的形态结构与力学性能的影响。研究结果表明,用甲基丙烯酸甲酯(MMA)为共聚单体的接枝VER网络中的MMA链段与PU网络中的硬段有较好的相容性,导致这类PU/接枝VERSIN中两个网络间的相容性和互穿程度好于由苯乙烯为共聚单体时合成4SIN。因此,在这两类共聚单体合成的SIN中,由MMA形成的接枝VER网络增强PU网络的效果更为显著。     

网络间含离子键的聚氨酯/接枝乙烯基酯树脂互穿聚合物网络 研究

分别以双酚-A型环氧树脂E-51和聚醚型环氧树脂E-46为原料合成了两种二乙胺-环氧树脂和加成多元醇(分别命名为AE-51,AE-46),将其和甲基丙烯酸一起用于合成聚氨酯/接枝乙烯基酯树脂(PU/接枝VER)互穿聚合物网络(IPN),使之在两个网络间形成离子键。实验结果表明,这类新型的IPN材料中两个网络间的互穿程度与相容性进一步提高,从而导致刚性的接枝VER对弹性的PU网络有更好的增强效果。DSC和FTIR的测定结果表明,在含AE-51的IPN中,由于离子键的作用使PU网络硬段的有序结构遭到很大程度的破坏,与AE-51和PU网络中的硬段以及VER网络有较好的相容性有关,因此这类IPN材料具有较好的力学性能。     

甲苯二异氰酸酯形成的聚氨酯脲与接枝乙烯基酯树脂互穿网络研究

本文首先通过分子设计技术合成了一系列侧链长度可以控制的接枝乙烯基酯树脂 (接枝VER :BO g VER ,2 0 0 g VER ,390 g VER) ,并用它们与甲苯二异氰酸酯合成的聚氨酯脲 (PUU)形成同步互穿网络(SIN) .通过DSC、SEM等考察了接枝VER的结构对PUU/接枝VERSIN的形态与力学性能的影响 .在PUU/BO g VERSIN中 ,BO g VER网络主要与PUU网络中的硬段相容和互穿 ;对于PUU/ 2 0 0 g VERSIN而言 ,2 0 0 g VER网络与PUU网络中的软段和硬段均有一定的相容性 .由于这两种SIN中两个网络间均有一定的相容性和互穿 ,故这类接枝网络能显著地增强PUU网络 ,使材料的力学性能有较大幅度的提高 .390 g VER网络本身存在的微相分离结构 ,使PUU/ 390 g VERSIN两个网络也存在显著的相分离形态 ,导致390 g VER网络对PUU网络的增强效果并不明显 .     

聚氨酯/环氧树脂互穿网络硬质泡沫塑料反应过程和微观结构

聚氨酯／环氧树脂互穿网络(PU／EPIPN)硬泡中异氰酸根的消耗速度较纯PU硬泡高，是由于环氧树脂的固化荆同时也是异氰酸根反应的催化荆。而PU／EP IPN硬泡中环氧基的反应速度和反应程度均较纯EP网络低，归因于互穿网络对基团扩散的阻碍。在互穿网络硬泡形成过程中，存在环氧开环中所新产生的羟基与异氰酸根的反应、大分子多元醇中羟基与环氧基的反应以及异氰酸根与环氧基形成嗯唑烷酮的反应三种形成网络间的化学键的途径。同时由于PU／EPIPN硬泡高度的交联，使得IPN硬泡中两个网络具有良好的相容性。动态力学性能表明所有IPN样品都只有一个玻璃化温度。透射电镜表明IPN样品无明显的相界面。     

聚氨酯/乙烯基酯树脂互穿聚合物网络阻尼性能的研究

采用二步法制备了聚氨酯／乙烯基酯树脂互穿聚合物网络,动态力学分析法研究了ＩＰＮ的阻尼性能。结果表明,聚氨酯／乙烯基酯树脂互穿聚合物网络出现宽温度阻尼范围。当聚氨酯／乙烯基酯树脂＝４０／６０时,材料的宽温度范围的阻尼性能最好。在体系中引入柔性链可改善低温阻尼性能,而引入刚性链则降低阻尼值、提高阻尼温度、阻尼温度范围变窄。在体系中引入大侧基能显著提高聚氨酯／乙烯基酯树脂互穿聚合物网络的阻尼性能,提高交     

反应注射成型聚氨酯互穿聚合物网络的进展

本文将介绍有关反应注射成型聚氨酯同步互穿聚合物网络（ＲＩＭ ＳＩＮ）方面的研究工作。综合文献报道和我们研究扬实验工作，重点描述了不饱和聚酯树脂或乙烯基酯树脂为刚性相的聚氨酯互穿聚合物网络，讨论了它们的生成反应动力学及其形态结构发展进程，并与样品力学性能相关联。     

乙醇在环氧树酯/氨酯丙烯酸树脂互穿网络中的扩散研究(Ⅱ)──非均相传递模型及其应用

由于环氧树酯(epoxy)/氨酯丙酸酯树脂(UAR)同步互穿网络(SIN)表现出明显的相分离形态,因此建立了非均相传递模型.实验结果表明,在所研究的epoxy/UARSIN质量比范围内(100/0～50/50),两个网络呈现出具有一定相畴尺寸的形态,用非均相模型能更好地关联实测的吸收曲线,关联因子ψ的物理意义为分散相在连续相中的分散程度.随着epoxy/UARSIN中UAR相的增加,ψ增加,表明UAR网络在eooxy网络中的分散程度增加,相畴尺寸变小;当SIN质量组成比为50/50时,由于两个网络成为双向连续的形态,故ψ显著增大.     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

网间交联型增韧环氧树脂/蓖麻油聚氨酯互穿网络聚合物的动态力学性能和形态结构

 以增韧环氧树脂(TEP)和蓖麻油聚氨酯[PU(CO)]形成的互穿网络聚合物(IPN),两网络间具有一定数量的交联点,在一定组成下,该IPN的tanδ-T曲线半峰宽达100℃,tanδ最大值接近1,阻尼性能良好。形态研究表明,该IPN既有增韧环氧树脂本身的两相结构,又有IPN的两相结构。     

聚氨酯/丙烯酸酯类树脂互穿网络的结构形态与力学性能研究——网络间化学键的影响

通过示差扫描量热计、扫描电镜与广角Ｘ 光衍射仪研究了由碳化二亚胺改性二苯基甲烷二异氰酸酯合成的聚氨酯（ＰＵ）与丙烯酸酯类树脂（ＶＥＲ）形成的同步互穿网络（ＳＩＮ）的结构、形态与力学性能,发现网络间的化学键对其影响极大．网络间没有化学键连接的ＰＵ／ＶＥＲＳＩＮｓ是一个热力学不相容体系,存在显著的相分离形态,后者同时与两个网络的形成速率与工程因素有关;对于网络间有化学键连接的ＰＵ／ＶＥＲＳＩＮｓ,两个网络间存在一定的相容性与互穿程度,故较显著地提高ＳＩＮ的力学性能．     

丁苯、丁腈基聚氨酯的形态与性能

用示差扫描量热法 (DSC)、红外分光光度计 (FTIR)和原子力显微镜 (AFM)研究了端羟基聚丁二烯 苯乙烯共聚物 (HTBS)、端羟基聚丁二烯 丙烯腈共聚物 (HTBN)和端羟基聚丁二烯 (HTPB)与甲苯二异氰酸酯、1 ,4 丁二醇构成的溶液法聚二烯烃基聚氨酯 (PU)的形态结构 .结果表明HTPB和HTBS基PU的相分离程度很大 ,而HTBN基PU的相分离程度小 .这可能归因于HTBS软段的极性低 ,不能与硬段形成氢键 ,而HTBN软段中的腈基具有很强的极性 ,且可以与硬段形成氢键作用 ,增加了软硬段间的相容性 ,相分离程度明显降低 .AFM表明HTBN PU随着硬段含量提高 ,表面粗糙度增大 ,由软段为连续相逐渐过渡到双连续结构 .在硬段含量 6 3%时 ,HTBN和HTPB基PU均呈双连续结构 ,而HTBS PU中硬段为连续相 .HTBN PU软段的相区尺寸在1 2nm左右 ,表面粗糙度较大 ,HPBS PU软段的相区尺寸在 1 1nm左右 ,表面粗糙度最小 ,HTPB PU存在 1 4nm和 5 0nm大小不等的软段相区尺寸 .力学性能表明 ,在软段中引入苯乙烯和丙烯腈结构 ,可使聚氨酯抗张强度分别提高 1 5和 2倍 ,模量和断裂伸长率也明显提高     

Effect of molecular shape of diisocyanate units on the microscopic/macroscopic phase separation structure of polyurethanes

Three diisocyanate units having different linearity and planarity on the basis of the arrangement of constituent aromatic rings are used to synthesize three polyurethanes (PUs) and the effects of the molecular structure of the diisocyanate units on phase separated morphologies of PUs have been studied. The linear and planar diisocyanate unit allows good packing of the hard segments in the hard domain by extensive intersegmental hydrogen bonding, and it forms a well ordered, long hard domain. However, the nonlinear and noncoplanar diisocyanate unit shows a lesser degree of hydrogen bonding in the short hard domain. Strong preferential orientation of the rigid/long hard domains inside a macroscopic grain boundary has been observed with the polarizing optical microscope especially for the PU based on the rigid diisocyanate. It was concluded that the molecular structure of the diisocyanate unit in PU plays an important role in determining the interchain interaction, the detailed phase‐separated domain structure, and local domain orientation in each grain boundary. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

Synthesis and characterization of novel h‐HTBN/PEG PU copolymers for tissue engineering: degradation,phase behavior,and mechanical properties

The phase behavior of the as‐prepared polyether polyurethane (PU) elastomers was investigated by dynamic mechanical analysis (DMA), polarized optical microscope (POM), and atomic force microscopy (AFM). This PU copolymers were composed of different compositions of two soft segments, poly(ethylene glycol) (PEG) and hydrolytically modified hydroxyl‐terminated poly(butadiene‐co‐acrylonitrile) (h‐HTBN) oligomers. The microphase separation behavior is confirmed to occur between soft and hard segments as well as soft and soft segments as the h‐HTBN is incorporated into the PU system, depending on soft‐soft and/or soft‐hard microdomain composition, molecular weight (MW) of PEG, and hydrolysis time of HTBN. The driving force for this phase separation is mainly due to the formation of inter‐ and intramolecular hydrogen bonding interaction. The PU‐70, PU‐50 samples with non‐reciprocal composition seem to exhibit larger microphase separation than any other PU ones. The hydrolysis degradation, thermal stability, and mechanical properties of the copolymers were assessed by gravimetry, scanning electron microscope (SEM), thermal gravity analysis (TGA), and tensile test, respectively. The experimental results indicated that the incorporation of h‐HTBN soft segment into PEG as well as low MW of PEG leads to increased thermal and degradable stability based on the intermolecular hydrogen bond interaction. The PU‐70 and PU‐50 copolymers exhibit better mechanical properties such as high flexibility and high ductility because of their larger microphase separation architecture with the hard domains acting as reinforcing fillers and/or physical crosslinking agents dispersed in the soft segment matrix. Copyright © 2009 John Wiley & Sons, Ltd.     

Semi-interpenetrating polymer networks of polyurethane and poly(vinyl chloride)

Summary A series of semi-interpenetrating polymer networks (semi-IPN) of polyurethane (PU) and poly(vinyl chloride) (PVC) has been obtained by prepolymer method and characterised by FTIR; morphological features were examined by SEM-EDS. It has been found that PVC spherical aggregates are dispersed in the PU matrix, but Cl atoms location indicates partial miscibility of both polymers at the interphase which is probably due to hydrogen bonding and/or dipole-dipole interactions. The PVC component influences the phase behaviour of PUs hard segments, as evidenced by DSC results. Thermogravimetric analysis (TG) reveals a complex, multi-step decomposition process with the main mass loss at 503-693 K, while the DTG maxima are located between 540 and 602 K.     

Sorption and diffusion of ethanol vapor in polybutadiene/acrylonitrile, polybutadiene/styrene and polybutadiene based polyurethanes

The sorption and diffusion behavior of ethanol vapor in series of polyolefine based polyurethanes (PU) made from hydroxyl-terminated polybutadiene/acrylonitrile (HTBN), hydroxyl-terminated polybutadiene/styrene (HTBS) and hydroxyl-terminated polybutadiene (HTPB) were investigated by using the quartz-spring, DSC, FTIR and AFM. The equilibrium absorption reduced with increasing content of hard segments for all the three types of PUs. The values of the maximum absorption were in the order of HTBN > HTBS > HTPB based PU and related to their composition. The non-Fickian diffusion was confirmed and the sorption was discovered mainly in the hard segments. The HTBN based PU revealed different sorption and diffusion behavior from the other two, which was resulted from its hydrogen bonding not only between ethanol and hard segments but also soft segments. The morphologies of PUs before and after ethanol absorption were also compared. The HTBN based PU showed the most evident phase re-congregation after ethanol absorption.     

环氧树脂/氨酯丙烯酸酯树脂互穿聚合物网络生成动力学研究

用ＦＴＩＲ跟踪研究了由不同分子量聚氧化丙烯（ＰＰＯ）合成的氨酯丙烯酸酯树脂（ＵＡＲ）／环氧树脂（ｅｐｏｘｙ）同步互穿网络（ＳＩＮ）的生成动力学．结果表明,在聚合反应初期（转化率＜０４）环氧基和不饱和双键的转化率均和反应时间呈近似线性关系,聚合反应主要由单体的扩散控制;由不同分子量ＵＡＲ合成的ｅｐｏｘｙ／ＵＡＲＳＩＮ的生成动力学有较大差异,与ＳＩＮ形成过程中的形态发展有关．通过不同用量的ＡＩＢＮ,可以调节ＵＡＲ网络的形成速度,导致ＳＩＮ中两个网络的生成顺序发生改变．